Gold(I) and silver(I) complexes containing a tripodal tetraphosphine ligand: influence of the halogen and stoichiometry on the properties. The X-ray crystal structure of two gold(I) dimeric aggregates

Complexes of the type [Au2(micro-PP3)2]X2 [X=Cl (), Br (), I ()], [Ag2(micro-PP3)2](NO3)2 (), Ag(PP3)Cl (), M3(micro-PP3)X3 [M=Au, X=Cl (), Br (), I (); M=Ag, X=NO3 ()] and Au4(micro-PP3)X4 [X=Cl (), Br (), I ()] have been prepared by interaction between gold(I) or silver(I) salts and the ligand tris[2-(diphenylphosphino)ethyl]phosphine (PP3) in the appropriate molar ratio. Microanalysis, mass spectrometry, IR and NMR spectroscopies and conductivity measurements were used for characterization. and are ionic dinuclear species containing four-coordinate gold(i) and four/three coordinate silver(i), respectively. Solutions of behave as mixtures of complexes in a 2:1 [Au2(micro-PP3)X2; X=Cl(), Br(), I()] and 4:1 () metal to ligand ratio. and react with free PP(3) in solution to generate the ionic compounds and , respectively. Complexes and , with four linear PAuX fragments per molecule, were shown by X-ray diffraction to consist of dimeric aggregates via close intermolecular gold(I)gold(I) contacts of 3.270 A () and 3.184 A (). The resultant octanuclear systems have an inversion center with two symmetry-related gold(I) atoms being totally out of the aurophilic area and represent a new form of aggregation compared to that found in other halo complexes of gold(I) containing polyphosphines. The luminescence properties of the ligand and complexes, in the solid state, have been studied. Most of the gold systems display intense luminescent emission at room and low temperature. The influence of the halogen on the aurophilic contacts of compounds with a 4:1 metal to ligand ratio results in different photophysical properties, while and are luminescent complex is nonemissive. The luminescence increases with increasing the phosphine/metal ratio affording for complexes , without aurophilic contacts, the stronger emissions. Silver complexes and are nonemissive at room temperature and show weaker emissions than gold(I) species at 77 K.     

Physicochemical and photophysical studies on porphyrin-based donor-acceptor systems: effect of redox potentials on ultrafast electron-transfer dynamics

We report new polychromophoric complexes, where different porphyrin (P) derivatives are covalently coupled to a redox active Mo center, MoL*(NO)Cl(X) (L* is the face-capping tridentate ligand tris(3,5-dimethylpyrazolyl) hydroborate and X is a phenoxide/pyridyl/amido derivative of porphyrin). The luminescence quantum yields of the bichromophoric systems (1, 2, and 5) were found to be an order of magnitude less than those of their respective porphyrin precursors. Transient absorption measurements revealed the formation of the porphyrin radical cation species (P(.)(+)) and photoinduced electron transfer from the porphyrin moiety to the respective Mo center in 1, 2, and 5. Electrochemical studies showed that the reduction potentials of the acceptor Mo centers in a newly synthesized pyridyl derivative (2; E(1/2)[Mo(I/0)] = approximately -1.4 V vs Ag/AgCl) and previously reported phenoxy- (1; E(1/2)[Mo(II/I)] = approximately -0.3 V vs Ag/AgCl) and amido- (3; E(1/2)[Mo(II/I)] = approximately -0.82 V vs Ag/AgCl) derivatives were varied over a wide range. Thus, studies with these complexes permitted us to correlate the probable effect of this potential gradient on the electron-transfer dynamics. Time-resolved absorption studies, following excitation at the Soret band of the porphyrin fragment in complexes 1, 2, and 5, established that forward electron transfer took place biexponentially from both S2 and S1 states of the porphyrin center to the Mo moiety with time constants 150-250 fs and 8-20 ps, respectively. In the case of MoL*(NO)ClX (where X is pyridine derivative 2), the high reduction potential for the MoI/0 couple allowed electron transfer solely from the S2 state of the porphyrin center. Time constants for the charge recombination process for all complexes were found to be 150-300 ps. Further, electrochemical and EPR studies with the trichromophoric complexes (3 and 4) revealed that the orthogonal orientation of the peripheral phenoxy/pyridyl rings negated the possibility of any electronic interaction between two paramagnetic Mo centers in the ground state and thereby the spin exchange, which otherwise was observed for related Mo complexes when two Mo centers are separated by a polyene system with comparable or larger separation distances.     

Redox properties of bis(1,10-phenanthroline)-(pyridine)ruthenium(II) complexes

The redox properties of a series of [Ru(phen)₂(py)X]ⁿ⁺ cations (X = pyridine, NH₃, Cl, Br, I, CN, SCN, N₃ and NO₂) have been investigated in acctonitrile. Two reversible reduction steps are seen at ? 1.35 and ? 1.6 V vs Ag/AgCl; the invariance of these processes with X-group is indicative of electron addition to molecular orbitals mainly of phenanthroline ligand π^* origin. Irreversible multi-electron reductions follow below ? 2.20 V. The Ru(II)/Ru(III) couple is seen as a reversible wave near + 0.8 V vs the normal hydrogen electrode, from calibration with ferrocene, except in the cases of the NO₂ and SCN complexes, where rapid reactions involving these ligands occur.     

Ruthenium(II) complexes containing the pentadentate SNNNS chelating ligand 2,6–diacetylpyridine bis(4–(p-tolyl)thiosemicarbazone). Synthesis,reactivity and electrochemistry

Ruthenium(II) heptacoordinate complexes containing the pentadentate SNNNS chelating ligand 2,6–diacetylpyridine bis(4–(p-tolyl)thiosemicarbazone) (L1H2) have been prepared. The compounds were of the type Ru(L1H2)X2 [X=Cl (1);Br (2); SCN (3)],[Ru(L1H2)- (Y)Cl]Cl [Y=imidazole (4); pyridine-N-oxide (5)] and [Ru(L1H2)(PPh3)X]Y, [X=Cl (6), (7);Br (8); Y=ClO4/ PF6]. The complexes were characterised by i.r., u.v.–vis. and n.m.r. spectroscopy and their electrochemical behaviour was examined by cyclic voltammetry. They exhibit a reversible to quasi-reversible RuII/RuIII couple in MeCN solution at a glassy carbon working electrode using an Ag/AgCl electrode as the reference. This revised version was published online in June 2006 with corrections to the Cover Date.     

Tetraphosphinitoresorcinarene complexes: cationic silver(I) and copper(I) halide complexes as mercurate(II) anion receptors

The reactions of mercury(II) halides with the tetraphosphinitoresorcinarene complexes [P4M5X5], where M=Cu or Ag, X=Cl, Br, or I, and P4=(PhCH2CH2CHC6H2)4(O2CR)4(OPPh2)4 with R=C6H11, 4-C6H4Me, C4H3S, OCH2CCH, or OCH2Ph, have been studied. The reactions of the complexes with HgX2 when M=Ag and X=Cl or Br occur with elimination of silver(I) halide and formation of [P4Ag2X(HgX3)], but when M=Ag and X=I, the complexes [P4Ag4I5(HgI)] are formed. When M=Cu and X=I, the products were the remarkable capsule complexes [(P4Cu2I)2(Hg2X6)]. When M=Ag and X=I, the reaction with both CuI and HgI2 gave the complexes [P4Cu2I(Hg2I5)]. Many of these complexes are structurally characterized as containing mercurate anions weakly bonded to cationic tetraphosphinitoresorcinarene complexes of copper(I) or silver(I) in an unusual form of host-guest interaction. In contrast, the complex [P4Ag4I5(HgI)] is considered to be derived from an anionic silver cluster with an iodomercury(II) cation. Fluxionality of the complexes in solution is interpreted in terms of easy, reversible making and breaking of secondary bonds between the copper(I) or silver(I) cations and the mercurate anions.     

The inducing NO-vasodilation by chemical reduction of coordinated nitrite ion in cis-[Ru(NO(2))L(bpy)(2)](+) complex

The synthesis of [Ru(NO(2))L(bpy)(2)](+) (bpy = 2,2'-bipyridine and L = pyridine (py) and pyrazine (pz)) can be accomplished by addition of [Ru(NO)L(bpy)(2)](PF(6))(3) to aqueous solutions of physiological pH. The electrochemical processes of [Ru(NO(2))L(bpy)(2)](+) in aqueous solution were studied by cyclic voltammetry and differential pulse voltammetry. The anodic scan shows a peak around 1.00 V vs. Ag/AgCl attributed to the oxidation process centered on the metal ion. However, in the cathodic scan a second peak around -0.60 V vs. Ag/AgCl was observed and attributed to the reduction process centered on the nitrite ligand. The controlled reduction potential electrolysis at -0.80 V vs. Ag/AgCl shows NO release characteristics as judged by NO measurement with a NO-sensor. This assumption was confirmed by ESI/MS(+) and spectroelectrochemical experiment where cis-[Ru(bpy)(2)L(H(2)O)](2+) was obtained as a product of the reduction of cis-[Ru(II)(NO(2))L(bpy)(2)](+). The vasorelaxation observed in denuded aortic rings pre-contracted with 0.1 mumol L(-1) phenylephrine responded with relaxation in the presence of cis-[Ru(II)(NO(2))L(bpy)(2)](+). The potential of rat aorta cells to metabolize cis-[Ru(II)(NO(2))L(bpy)(2)](+) was also followed by confocal analysis. The obtained results suggest that NO release happens by reduction of cis-[Ru(II)(NO(2))L(bpy)(2)](+) inside the cell. The maximum vasorelaxation was achieved with 1 x 10(-5) mol L(-1) of cis-[Ru(II)(NO(2))L(bpy)(2)](+) complex.     

Structural studies and anticancer activity of a novel (N6O4) macrocyclic ligand and its Cu(II) complexes

A novel (N6O4) macrocyclic ligand (L) and its Cu(II) complexes have been prepared and characterized by elemental analysis, spectral, thermal (TG/DTG), magnetic, and conductivity measurements. Quantum chemical calculations have also been carried out at B3LYP/6-31+G(d,p) to study the structure of the ligand and one of its complexes. The results show a novel macrocyclic ligand with potential amide oxygen atom, amide and amine nitrogen atoms available for coordination. Distorted square pyramidal ([Cu(L)Cl]Cl·2.5H2O (1), [Cu(L)NO3]NO(3)·3.5H2O (2), and [Cu(L)Br]Br·3H2O (4) and octahedral ([Cu(L)(OAc)2]·5H2O (3)) geometries were proposed. The EPR data of 1, 2, and 4 indicate d1x2(-y)2 ground state of Cu(II) ion with a considerable exchange interaction. The measured cytotoxicity for L and its complexes (1, 2) against three tumor cell lines showed that coordination improves the antitumor activity of the ligand; IC50 for breast cancer cells are ≈8.5, 3, and 4 μg/mL for L and complexes (1) and (2), respectively.     

Spectroscopic approach in the characterization of the copper(II) complexes of isatin-3,2'-quinolyl-hydrazones and their adducts

Copper(II) complexes of isatin-3,2'-quinolyl-hydrazones of the type [Cu(L)X] (where X=Cl(-), Br(-), NO(3)(-), CH(3)COO(-) and ClO(4)(-)] and their adducts Cu(L)X.2Y [where Y=pyridine or dioxane and X=Cl(-), Br(-), NO(3)(-) and ClO(4)(-)] have been synthesized under controlled experimental conditions and characterized by using the modern spectroscopic and physicochemical techniques viz. IR, electronic, EPR, elemental analysis, magnetic moment susceptibility measurements and molar conductance, etc. On the basis of spectral studies a four coordinated square planer geometry is assigned for Cu(L)X type complexes whereas the adducts (Cu(L)X.2Y were found to have a six coordinated octahedral geometry.     

Syntheses and structures of copper(I) complexes based on Cu(n)X(n) (X = Br and I; n = 1, 2 and 4) units and bis(pyridyl) ligands with longer flexible spacer

Self-assembly of four bis(pyridyl) ligands with longer flexible spacer: 1,4-bis(3-pyridylaminomethyl)benzene (L1), 1,4-bis(2-pyridylaminomethyl)benzene (L2), 1,3-bis(3-pyridylaminomethyl)benzene (L3) and 1,3-bis(2-pyridylaminomethyl)benzene (L4), and CuX (X = Br and I) leads to the formation of eight [Cu(n)X(n)]-based (X = Br and I; n = 1, 2, and 4) complexes, [Cu(2)I(2)L1(PPh(3))(4)] (1), [Cu(4)Cl(2)Br(2)(L4)(2)(PPh(3))(6)]·(CH(3)CN)(2) (2), [Cu(2)I(2)(L3)(2)] (3), {[Cu(2)Br(2)L2(PPh(3))(2)]·(CH(2)Cl(2))(2)}(n) (4), [CuIL1](n)·nCH(2)Cl(2) (5), [CuIL1](n) (6), [CuIL4](n) (7) and [Cu(2)I(2)L4](n) (8), which have been synthesized and characterized by elemental analysis, IR, TG, powder and single-crystal X-ray diffraction. Structural analyses show that the eight complexes possess an increasing dimensionality from 0D (1-3) to 1D (4) to 2D (5-8), in which 1 and 2 contain a CuX unit, 2-7 contain a Cu(2)X(2) unit and 8 contains a Cu(4)X(4) unit. Such evolvement indicates that the conformation of flexible bis(pyridyl) ligands and the participation of triphenylphosphine (PPh(3)) as a second ligand take an essential role in the framework formation of the Cu(i) complexes. Moreover, a pair of symmetry-related L3 ligands in complex 3 coordinate to the rhomboid Cu(2)I(2) dimer to form "handcuff-shaped" dinuclear structures, which are further joined together through intermolecular N-HI hydrogen bonds to furnish a 2D (4,4) layer. Although complexes 5 and 6 exhibit a similar 2D (4,4) layer constructed from L1 ligand bridging [Cu(2)I(2)](n) units, the different packing fashion of the layers leads to the formation of 3D porous frameworks of 5 and dense 3D frameworks of 6. The "twisted-boat" conformation of the Cu(4)I(4) tetramer unit in complex 8 has not been reported so far.     

Dioxo-bridged dinuclear manganese(III) and -(IV) complexes of pyridyl donor tripod ligands: combined effects of steric substitution and chelate ring size variations on structural,spectroscopic, and electrochemical properties

The syntheses and structural, spectral, and electrochemical characterization of the dioxo-bridged dinuclear Mn(III) complexes [LMn(mo-O)(2)MnL](ClO(4))(2), of the tripodal ligands tris(6-methyl-2-pyridylmethyl)amine (L(1)) and bis(6-methyl-2-pyridylmethyl)(2-(2-pyridyl)ethyl)amine (L(2)), and the Mn(II) complex of bis(2-(2-pyridyl)ethyl)(6-methyl-2-pyridylmethyl)amine (L(3)) are described. Addition of aqueous H(2)O(2) to methanol solutions of the Mn(II) complexes of L(1) and L(2) produced green solutions in a fast reaction from which subsequently precipitated brown solids of the dioxo-bridged dinuclear complexes 1 and 2, respectively, which have the general formula [LMn(III)(mu-O)(2)Mn(III)L](ClO(4))(2). Addition of 30% aqueous H(2)O(2) to the methanol solution of the Mn(II) complex of L(3) ([Mn(II)L(3)(CH(3)CN)(H(2)O)](ClO(4))(2) (3)) showed a very sluggish change gradually precipitating an insoluble black gummy solid, but no dioxo-bridged manganese complex is produced. By contrast, the Mn(II) complex of the ligand bis(2-(2-pyridyl)ethyl)(2-pyridylmethyl)amine (L(3a)) has been reported to react with aqueous H(2)O(2) to form the dioxo-bridged Mn(III)Mn(IV) complex. In cyclic voltammetric experiments in acetonitrile solution, complex 1 shows two reversible peaks at E(1/2) = 0.87 and 1.70 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and the Mn(III)Mn(IV) <--> Mn(IV)(2) processes, respectively. Complex 2 also shows two reversible peaks, one at E(1/2) = 0.78 V and a second peak at E(1/2) = 1.58 V (vs Ag/AgCl) assigned to the Mn(III)(2) <--> Mn(III)Mn(IV) and Mn(III)Mn(IV) <--> Mn(IV)(2) redox processes, respectively. These potentials are the highest so far observed for the dioxo-bridged dinuclear manganese complexes of the type of tripodal ligands used here. The bulk electrolytic oxidation of complexes 1 and 2, at a controlled anodic potential of 1.98 V (vs Ag/AgCl), produced the green Mn(IV)(2) complexes that have been spectrally characterized. The Mn(II) complex of L(3) shows a quasi reversible peak at an anodic potential of E(p,a) of 1.96 V (vs Ag/AgCl) assigned to the oxidation Mn(II) to Mn(III) complex. It is about 0.17 V higher than the E(p,a) of the Mn(II) complex of L(3a). The higher oxidation potential is attributable to the steric effect of the methyl substituent at the 6-position of the pyridyl donor of L(3).     

Copper(II) mediated anion dependent formation of Schiff base complexes

A tetranuclear mixed ligand copper(II) complex of a pyrazole containing Schiff base and a hydroxyhexahydropyrimidylpyrazole and copper(II) and nickel(II) complexes of the Schiff base having N-donor atoms have been investigated. A 2 equiv amount of 5-methyl-3-formylpyrazole (MPA) and 2 equiv of 1,3-diamino-2-propanol (1,3-DAP) on reaction with 1 equiv of copper(II) nitrate produce an unusual tetranuclear mixed ligand complex [Cu4(L1)2(L2)2(NO3)2] (1), where H2L1 = 1,3-bis(5-methyl-3-formylpyrazolylmethinimino)propane-2-ol and HL2 = 5-methyl-3-(5-hydroxyhexahydro-2-pyrimidyl)pyrazole. In contrast, a similar reaction with nickel(II) nitrate leads to the formation of a hygroscopic intractable material. On the other hand, the reaction involving 2 equiv of MPA and 1 equiv each of 1,3-DAP and various copper(II) salts gives rise to two types of products, viz. [Cu(T3-porphyrinogen)(H2O)]X2 (X = ClO4, NO3, BF4 (2)) (T3-porphyrinogen = 1,6,11,16-tetraza-5,10,15,20-tetrahydroxy-2,7,12,17-tetramethylporphyrinogen) and [Cu(H2L1)X]X x H2O (X = Cl (3), Br (4)). The same reaction carried out with nickel(II) salts also produces two types of compounds [Ni(H2L1)(H2O)2]X2 [X = ClO4 (5), NO3 (6), BF4 (7)] and [Ni(H2L1)X2] x H2O [X = Cl (8), Br (9)]. Among the above species 1, 3, and 5 are crystallographically characterized. In 1, all four copper atoms are in distorted square pyramidal geometry with N4O chromophore around two terminal copper atoms and N5 chromophore around two inner copper atoms. In 3, the copper atom is also in distorted square pyramidal geometry with N4Cl chromophore. The nickel atom in 5 is in a distorted octahedral geometry with N4O2 chromophore, where the metal atom is slightly pulled toward one of the axial coordinated water molecules. Variable-temperature (300 to 2 K) magnetic susceptibility measurements have been carried out for complex 1. The separations between the metal centers, viz., Cu(1)...Cu(2), Cu(2)...Cu(2)A, and Cu(2)A...Cu(1)A are 3.858, 3.89, and 3.858 A, respectively. The overall magnetic behavior is consistent with strong antiferromagnetic interactions between the spin centers. The exchange coupling constants between Cu(1)...Cu(2) and Cu(2)...Cu(2A) centers have turned out to be -305.3 and -400.7 cm(-1), respectively, resulting in a S = 1/2 ground state. The complexes are further characterized by UV-vis, IR, electron paramagnetic resonance, and electrochemical studies.     

Mixed-Anion Cu(II) Complexes with 3-(pyridin-2-yl)pyrazole (L), Syntheses and X-ray Crystal Structure of [Cu(L)2 Br]ClO4 (L=3-(pyridin-2-yl)pyrazole)

Reaction of the ligand 3-(pyridin-2-yl)pyrazole (L) with Cu(ClO₄)₂ and CuX₂ (X=Cl, Br, I) gives complexes with stoichiometry [Cu(L)₂X]ClO₄ (X = Cl, Br, I). The new complexes were characterized by elemental analyses and infrared and electronic spectroscopy. The crystal structure of the [Cu(L)₂Br]ClO₄ was determined by X-ray crystallography. The cation complex (i.e. [Cu(L)₂Br]P) contains copper(II) with a distorted trigonal bipyramid geometry with a Br^― ligand occupying an equatorial site. The penta-coordinated metal atom is bonded to two pyridinic nitrogens, two pyrazolic nitrogens, and one bromide anion. The pyrazolic H atoms are hydrogen bonded to Br atoms, resulting in infinite hydrogen-bonded chains running in the b direction. There are π‐π stacking interactions (charge-transfer arrays) between the parallel aromatic rings belonging to adjacent chains that may help to form hydrogen bonding in the coordination geometry around Cu (II).     

Synthesis, spectral and oxidase studies of a new diamide copper(II) complex with pendant benzimidazolyl groups

A new benzimidazole-based diamide ligand-N,N'-bis(alanine-2-benzimidazolyl) hexanediamide (ABHA) has been synthesized and utilized to prepare Cu(II) complexes of general composition [Cu(ABHA)X2].nH2O,where X is an exogenous anionic ligand (X=Cl-,NO3-). Low temperature EPR spectra has been obtained that shows gparallel>gperpendicular>2.0024, indicating a tetragonal geometry in the solution state. The complexes display a quasi-reversible redox wave due to the Cu(II)/Cu(I) reduction process. E1/2 values shift anodically as NO3-相似文献   

含混合配体双核铜（I）配合物的合成及荧光光谱

合成了含双二苯基膦甲烷（dppm)和邻菲咯啉（phen)混合配体的双核铜（I）配合物[Cu(dppm)(phen)]2(NO3)21,并经X射线单晶结构分析表征了配合物的结构，研究了配合物的荧光光谱特征，配合物1的结构分析表明，dppm作为桥式双齿配体、phen作为双齿配体分别与铜原子形成四面体配位结构，硝酸根离子位于配合物外界。     

Choice of coordination number in d10 complexes of group 11 metals

The distribution of di-, tri-, and tetracoordination among the d(10) ions of the group 11 metals is theoretically analyzed by means of density functional calculations on more than 150 model complexes of general formula [MX(m)L(n)](1-m) (where M = Cu, Ag, or Au; L = NH(3) or PH(3); X = Cl, Br, or I; m + n = 2-4). The energy of a ligand association reaction has been found to be practically determined by two contributions: the interaction energy and the energy of deformation of the metal coordination sphere. The larger deformation energy of gold complexes compared to copper and silver ones explains the predominance of dicoordination among Au(I) complexes, in comparison with Cu(I) and Ag(I), for which dicoordination is far less common than tri- and tetracoordination. Other experimental trends can be explained by looking at the fine details of these two energetic components.     

Redox characteristics of Schiff base manganese and cobalt complexes related to water-oxidizing complex of photosynthesis

In an effort to obtain synthetic analogues of water-oxidizing complex (WOC) of photosystem II (PS II) of plant photosynthesis, a Schiff base manganese and a cobalt complex, employing Niten, a SALEN type ligand, have been prepared. Cyclic and square wave voltammetric measurements have been performed to assess their redox characteristics. Both complexes undergo several reduction processes in cathodic negative potential region at more or less similar potentials. In view of these reductions being independent of the nature of the metal, they are thought to be ligand-localized. Although similar in negative region, a marked difference in the behavior of the complexes is observed in anodic region. While the cobalt complex is electrochemically inactive in the positive potentials up to +1.0 V vs. Ag/AgCl, the manganese complex displays two oxidation waves at +0.25 and +0.5 V vs. Ag/AgCl. The presence of oxidation wave in manganese complex at +0.5 V vs. Ag/AgCl or +0.7 V vs. NHE suggests that this complex can catalyze the oxidation of water and can, thus, simulate the WOC of PS II.     

Coordination polymers of copper(I) halides

A total of 21 complexes of CuX (X = Cl, Br, I) with bridging ligand (B = 4,4'-dipyridyl (Bpy), pyrazine (Pyz), quinoxaline (Quin), phenazine (Phz), 1,4-diazabicyclo[2.2.2]octane (DABCO), and hexamethylenetetramine (HMTA)) have been synthesized. The products show two stoichiometries: [CuXB] (type 1) and [(CuX)2B] (type 2). Both types can be obtained for B = Bpy, depending on the conditions of preparation. In these cases, the type 2 stoichiometry is the kinetic product. Type 2 complexes only are found for B = Pyz (X = I), Quin, Phz, DABCO, and HMTA. Type 1 complexes form for Pyz (X = Cl, Br). Thermogravimetic analyses of the complexes reveal the general decomposition trend: 1 --> 2 --> [(CuX)2B(1/2)] --> CuX. The X-ray crystal structure of [CuBr(Pyz)] (type 1) features copper atoms bridged by Br and Pyz, forming 2D sheets of fused rectangular Cu4Br2(Pyz)2 units. The X-ray structure of [(CuI)2(Quin)] (type 2) shows 2D layers composed of [Cu2I2]infinity "stair step" chains which are cross-linked by Quin ligands. A total of 16 complexes of CuXL (L = P(OPh)3) with bridging ligand (B = those above and 1,4-dimethylpiperazine (DMP)) have also been prepared. All of these products, except those of HMTA, are of type 3 formulation, [(CuXL)2B]. The HMTA products have the formula [CuX(HMTA)], type 4. Thermal decomposition of the type 3 and 4 complexes occurs with initial loss of B, L, or both. The X-ray structures of [(CuBrL)2(Bpy)] and [(CuBrL)2(Pyz)] (type 3) reveal 1D chains formed from rhomboidal (LCu)2Br2 units linked by the B ligand. The type 4 structure of [CuBrL(HMTA)] is shown by X-ray to be a simple halide-bridged dimer.     

Novel chelate ring-opening induced by silver(I) of five-coordinate palladium(II) and platinum(II) complexes containing tripodal polyphosphines

The ionic complexes [Pd(NP 3)X]X [NP 3 = tris[2-(diphenylphosphino)ethyl]amine, X = Cl (1), Br(2)] and [M(PP 3)X]X [PP 3 = tris[2-(diphenylphosphino)ethyl]phosphine, M = Pd, X = Cl (3), Br(4); M = Pt, X = Cl (5), Br (6)] contain square pyramidal (1, 2) and trigonal bipyramidal (3- 6) cations with three fused chelate rings to M and one M-X bond. By addition of AgX salts (X = Cl, Br, NO 3) an unexpected ring-opening reaction occurs with formation of the heteronuclear species PdAg(NP 3)X 3 [X = Cl (7), Br (8)], MAg(PP 3)X 3 [M = Pd, X = Cl (9), Br (10), NO 3 (13);M = Pt, X = Cl (11), Br (12), NO 3 (14)]. The complexes have been characterized in the solid state and solution. The X-ray crystal structures of 9 and 13 reveal a distorted square-planar arrangement to Pd(II) that is coordinated to three P of PP 3 (the central and two terminal atoms) and to one chloride (9) or one oxygen atom of NO 3 (13). The resultant dangling phosphorus of the ring opening is bound to Ag(I) that completes the three- [PAgCl 2 ( 9)] and four-coordination [PAg(ONO 2)(O 2NO) (13)] through the donor atoms of the anions with the nitrates in 13 unusually acting as both mono- and bidentate ligands. Complexes 7, 8, 10, and 11 undergo oligomerization in solution. Complex 10 oligomerizes giving rise to the ionic compound [Pd 4Ag 2(PP 3) 2 Br 9]Br ( 10a) whose X-ray crystal structure indicates the presence of cations with a Pd(mu-Br) 3Pd unit that connects via bromide bridges two BrPdP 2PPAg Br 2 fragments containing distorted square-planar and trigonal-planar Pd(II) and Ag(I) centers, respectively. The palladium(II) metal centers in the central unit afford the five-coordination (PdBr 5) with a distorted trigonal bipyramidal geometry. The ionic system [Pt 2Ag 2(PP 3) 2 Cl 5]Cl (11a) consists of chloride anions and heteronuclear monocations. The X-ray crystal structure reveals that the cations contain two distorted square-planar ClPtP 3 units bridged by one PAgCl(mu-Cl) 2AgP fragment that is bearing tetrahedral (PAgCl 3) and trigonal planar PAgCl 2 silver(I) centers. Further additions of the corresponding AgX salts to complexes 7- 14 did not give rise to any new ring-opening reaction.     

Dichroic, dinuclear mu2-(eta2-NO)-nitrosoaniline-bridged complexes of rhenium of the type [[(CO)3Re(mu-X)]2ONC6H4NR2] (X = Cl, Br, I; R = Me, Et)

A series of unusual dinuclear mu2-(eta2-NO)-nitrosoaniline-bridged complexes [[(CO)3Re(mu-X)]2ONC6H4NR2] (X = Cl, Br, I; R = Me, Et) with dichroic properties have been synthesised by reaction of pentacarbonylhalogenorhenium(I) [(CO)5ReX] (X = Cl, Br, I) with the corresponding nitrosoaniline derivatives R2NC6H4NO (R = Me, Et). The deeply coloured solutions in CH2Cl2 show broad UV/Vis absorptions from 595 to 620 nm depending on the halogen bridges and N substituents. Single crystals of all six compounds exhibit a pronounced linear dichroism. The molecular structures have been determined by single-crystal X-ray analyses. All the compounds contain two face-shared octahedra, with two halogens and one NO ligand as bridges. The NO ligand coordinates in a nonsymmetrical eta2-like fashion with N or O coordination to each Re centre. Therefore, the C-nitroso group and the planar NC2 moiety of NR2 both lie almost exactly within the symmetry plane of the dinuclear complexes. These complexes belong to the novel and simple class of neutral dinuclear C-nitroso complexes that include the rare, non-assisted mu2-(eta2-NO) ligand function and have only single halogen atoms in bridging positions.     

THE ESR STUDY OF SOME DICYCLOPENTA-DIENYL TITANIUM HALIDE COMPLEXES

The ESR spectra of some [Cp_2Ti(L)X] complexes (Cp: C_5H_5, MeC_5H_4; L: phosphane,isocyanide, pyridine, amine and carbon monoxide; X: F, Cl, Br, I) have been obtained.When X is Cl, Br or I, the linear relationships between the g value and hyperfine couplingcoustant a(Ti) are explained in terms of the electron character of the L ligand and the ESRspectral trends of the complexes are studied.