基于磁性金属有机骨架材料的多功能催化剂Fe_3O_4@IRMOF-3/Pd的制备及催化性能

采用逐层自组装方法制备了磁性Fe_3O_4@IRMOF-3复合材料,通过浸渍法将Pd纳米粒子负载到Fe3O4@IRMOF-3上,得到多功能催化剂Fe3O4@IRMOF-3/Pd.用粉末X射线衍射(XRD)、傅里叶变换红外光谱(FTIR)、透射电子显微镜(TEM)、扫描电子显微镜(SEM)及原子吸收(AAS)等方法对材料的组成和结构进行了表征,并考察了催化剂在Knoevenagel缩合反应、Suzuki偶联反应和烯烃催化加氢反应中的催化性能.结果表明,磁性Fe3O4@IRMOF-3/Pd催化剂在Knoevenagel缩合反应和Suzuki偶联反应中均表现出较好的催化活性和一定的循环稳定性.在烯烃的催化加氢反应中,催化剂可以高效催化多种烯烃的加氢反应,并表现出对底物的尺寸选择性.在苯乙烯的催化加氢反应中,催化剂循环使用9次,转化率依然大于99%,并且催化剂结构没有明显变化.     

铁氧化物催化类Fenton反应

高级氧化技术是当今水处理技术领域研究的热点,Fenton试剂因操作简单、反应条件温和及氧化效率高等优势而备受关注。铁氧化物催化类Fenton反应能有效地解决催化剂回收利用难等问题,并且能够在较为广泛的pH范围内使用,从而成为Fenton氧化领域一个新的研究方向,但反应过程和机制往往更为复杂。本文评述了铁氧化物催化类Fenton反应中可能存在的多种机理,主要是羟基自由基理论、氧空位机理和高价态铁络合物机制。类Fenton反应速率的限速步骤是Fe(Ⅲ)/Fe(Ⅱ)循环过程,从提高反应速率的机理出发,本文探讨了类Fenton反应中铁氧化物催化剂的制备和发展,催化剂中多种价态的铁元素,通过相互间发生电子转移以加速Fe(Ⅱ)的再生,提高反应效率。铁氧化物掺杂过渡金属能显著提高催化H2O2有效分解的活性。阐明了多金属掺杂铁氧化物中多金属组分的催化机制和铁氧化物结构形态对反应性能的影响。研究表明催化剂中铁的结构形态、催化剂比表面积、催化剂与H2O2之间电子转移速率等都是决定催化剂性能的重要因素。最后讨论了继续研究方向,为开展非均相类Fenton反应提供参考。     

氨基羧酸铁(III)配合物催化分解过氧化氢

用碘量法研究了[Fe（EDTA],[FeⅢ(DCTA)],[FeⅢ(EGTA)]催化分解H2O2反应，提出了反应动力学方程为-d[H2O2]/dt=k[FE(Ⅲ)][H2O2][H ]^-1，认为氨基羧酸铁（Ⅲ）配合物催化分解H2O2反应为键式自由基反应，反应中间体包括过氧铁（Ⅲ）配合物，氨基羧酸铁（Ⅱ）和HO-，HO2-自由基。     

新型高效乙酸丁酯合成固体酸催化剂及其反应工艺

酯化反应是精细化学工业中极为重要的一类反应 ,目前工业上均在硫酸液相催化下直接酯化制取。硫酸腐蚀反应器 ,污染环境 ,随着环保法规的不断完善 ,开发可替代硫酸的新型催化体系已成为现代化学工业中普遍关注的新趋势。目前的研究工作主要集中在以固体酸 (尤其是 SO2 - 4/Mx Oy 型固体酸 )替代硫酸催化酯化反应 [1～ 8]。我们制得了一种新型 SO2 - 4/Fe2 O3- Zr O2 - Si O2 催化剂[9] ,该催化剂催化乙酸 /丁醇酯化反应表现出良好的转化率、选择性、酯收率。考察了反应温度、反应时间、催化剂加入量等对乙酸 /丁醇酯化反应的影响 ,并考…     

萘并呋喃类化合物的合成研究进展

萘并呋喃是一类重要的有机芳杂环,其分子骨架不仅是许多天然产物、药物分子的核心结构,而且还是重要的有机合成中间体,在材料化学中也具有广泛的应用价值。因此,萘并呋喃及其衍生物的合成一直是有机合成的研究热点之一。本文将对已有的萘并呋喃类化合物的主要合成策略、方法,结合笔者课题组的部分研究工作进行综述,包括如下几个方面:(1)碱或酸促进的环化反应;(2)过渡金属催化的串联环化反应;(3)自由基引发的环化反应;(4)其他非金属催化的环化反应。最后展望了萘并呋喃衍生物合成的研究和发展方向。     

不同催化剂上有机质加氢热解行为及催化作用机理研究

对不同类型催化剂如Zn Cl2、Ni Cl2、Fe2O3、Y型沸石(Na Y)及Mo S2上有机质的催化加氢热解行为及反应机理进行了研究。结果表明,有机质加氢液态产物收率和组成受控于催化剂类型,但不同催化剂上加氢热解所得到的产物生标参数差异不大;同时,对于不同成熟度和类型的有机质样品,各催化剂所体现的催化效果也不尽相同。基于固体残渣元素组成、红外光谱和X射线衍射分析结果发现,不同类型催化剂上的加氢作用机制也存在明显差异。与Ni Cl2相比,Zn Cl2体系中除存在催化裂解和催化加氢作用外,还存在质量传递效应;Fe2O3催化剂主要是通过其表面的活性O吸收H2中的H形成H自由基而加速有机质的加氢反应;Mo S2体系存在过渡金属Mo的催化加氢和中间产物H2S的自由基引发作用两种催化机制。     

基于硅烷化启动的环化反应研究进展

有机硅化合物是许多材料的重要基元和有用的有机分子,是化学合成中用途广泛的合成中间体.因此,化学家们一直致力于开发构建含硅化学键的新方法,特别是C—Si键.自从Sakurai和Imai在1975年报道了第一个钯催化的硅环丁烷与炔的环加成反应以来,过渡金属催化硅基环化反应得到了迅速的发展.随着自由基反应的迅猛发展,研究者将其拓展到有机硅分子间环化反应,硅的环化反应迎来了新的发展.主要从过渡金属催化的硅环化反应、自由基引发的硅环化反应、C+离子引发的硅环化反应展开讨论,最后对当前的研究进展进行了总结.     

用于生物柴油清洁生产的磁性固体催化剂CaO/MgO/Fe_3O_4

制备了具有磁性和催化活性的双功能催化剂CaO/MgO/Fe3O4,用于催化花生油酯交换制备生物柴油的清洁生产过程。对CaO/MgO/Fe3O4进行了XRD、TEM、FT-IR和磁性等表征分析,探讨了CaO/MgO/Fe3O4催化剂的重复利用性能。结果表明,用Mg(Ac)2溶液等体积浸渍磁性基质Fe3O4,在N2气氛中600℃焙烧2 h,可得到具有磁性的载体5%MgO/Fe3O4;再用Ca(Ac)2溶液等体积浸渍MgO/Fe3O4,并在N2气氛中700℃煅烧,得到具有磁性且催化活性较高的催化剂10%CaO/MgO/Fe3O4。该催化剂具有核壳结构,磁核平均直径约为35 nm。在催化剂用量10%,醇油摩尔比12∶1,反应温度65℃,反应2 h的条件下酯交换转化率可达90%以上。在磁场的吸引下该催化剂能快速与反应体系分离,催化剂回收率达90%。但CaO/MgO/Fe3O4重复利用性能较差,其原因是在搅拌反应过程中催化活性组分逐渐从催化剂上脱落所致。     

制备参数对Au／Fe2O3催化剂水煤气变换性能的影响

 采用共沉淀法制备了Au／Fe2O3催化剂，并系统地考察了制备参数对其催化WGS性能的影响．通过BET，XRD，XRF，H2－TPR和HRTEM等表征手段，初步考察了Au／Fe2O3催化剂具有高催化活性的原因．结果表明，金负载量、沉淀剂种类、沉淀方式、沉淀pH值、焙烧气氛和焙烧温度对Au／Fe2O3催化剂的催化性能均具有较大的影响．Au／Fe2O3催化剂的低温高活性是纳米Au与Fe3O4协同作用的结果；Au／Fe2O3催化剂的高温活性是由于活性相Fe3O4起主要作用的结果．纳米Au粒子的烧结会降低其催化活性．     

Fe 含量对 FeAlPO-5 催化剂上甲烷还原 N2O 反应的影响

 采用水热法制备了一系列不同 Fe 含量的 FeAlPO-5 催化剂, 并将其用于 CH4 催化还原 N2O 反应. 结果表明, FeAlPO-5 催化剂在此反应中表现出较高的低温活性. N2 吸附、X 射线衍射和紫外可见光谱等表征结果表明, 水热法制备的 FeAlPO-5 催化剂具有典型的 AlPO-5 分子筛结构. Fe 含量对催化剂的活性及催化剂中 Fe 物种的分布有较大影响, 当 w(Fe) = 2.4% 时, 催化剂除含有可促使 CH4 低温还原 N2O 反应的孤立态的 Fe 物种和低聚态的 Fe 物种外, 还含有相当数量的可使 N2O 直接催化分解的纳米态的 Fe 物种.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.