Selective spectrophotometric determination of palladium(II) with 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO(2).PAPS) and tartaric acid with 5-NO(2).PAPS-niobium(V) complex

Spectrophotometric determinations of palladium(II) and tartaric acid were respectively investigated by using the color reactions between 2(5-nitro-2-pyridylazo)-5-(N-propyl-N-3-sulfopropylamino)phenol(5-NO₂.PAPS) and palladium(II) in strong acidic media, and between 5-NO₂.PAPS, niobium(V) tartaric acid in weak acidic media. The calibration graphs were linear in the range of 0–25 μg/10 ml palladium(II), with an apparent molecular coefficient () of 6.2×10⁴ l mol⁻¹ cm⁻¹ at 612 nm, and 0–23 μg/10 ml tartaric acid with =1.08×10⁶ l mol⁻¹ cm⁻¹ at 612 nm, respectively. The proposed methods were selective and sensitive in comparison with other chelating pyridylazo dyes–palladium(II) or metavanadic acid–tartaric acid method, and the effect of foreign ions such as copper(II) was negligible for the assay of palladium(II) with 5-NO₂.PAPS.     

Calorimetric comparison of the interactions between salivary proteins and Streptococcus mutans with and without antigen I/II

Antigen I/II can be found on streptococcal cell surfaces and is involved in their interaction with salivary proteins. In this paper, we determine the adsorption enthalpies of salivary proteins to Streptococcus mutans LT11 and S. mutans IB03987 with and without antigen I/II, respectively, using isothermal titration calorimetry. In addition, protein adsorption to the cell surfaces was determined spectrophotometrically. S. mutans LT11 with antigen I/II, yielded a much higher, exothermic adsorption enthalpy at pH 6.8 (ranging from −2073 × 10⁻⁹ to −31707 × 10⁻⁹ μJ per bacterium) when mixed with saliva than did S. mutans IB03987 (−165 × 10⁻⁹ to −1107 × 10⁻⁹ μJ per bacterium) at all bacterial concentrations studied (5 × 10⁹, 5 × 10⁸, and 5 × 10⁷ ml⁻¹), largest effects per bacterium being observed for the lowest concentration. However, the enthalpy of salivary protein adsorption to S. mutans LT11 became smaller at pH 5.8. Adsorption isotherms for the S. mutans LT11 showed considerable protein adsorption at pH 6.8 (1.2–2.1 mg/m²), that decreased only slightly at pH 5.8 (1.1–1.6 mg/m²), with the largest amount adsorbed at the lowest bacterial concentration. This suggests that the protein(s) in the saliva with the strongest affinity for antigen I/II is (are) readily depleted from saliva. In conclusion, antigen I/II surface proteins on S. mutans play a determinant role in adsorption of salivary proteins through the creation of enthalpically favorable adsorption sites.     

Extraction and spectrophotometric determination of cobalt(II) with isonitroso-5-methyl-2-hexanone

A simple and selective method is proposed for the extraction of cobalt(II) for its spectrophotometric determination using (HIMH) as an extractant. Cobalt(II) forms a yellow coloured complex with HIMH which can be extracted into chloroform. The calibration curve is rectilinear in the concentration range 0.1–5.0 μg ml⁻¹ of cobalt(II). The extracted species shows an absorption maximum at 400 nm with molar absorptivity of 1.135×10⁴ l mol⁻¹ cm⁻¹. The method has been applied for the determination of cobalt in synthetic mixtures, pharmaceutical, biological and high speed steel samples.     

Effect of presence of 18-crown-6 on the response of 1-pyrrolidine dicarbodithioate-based lead selective electrode

The lipophilic ammonium salt of 1-pyrrolidine dicarbodithioic acid (PCDT)[I] was introduced as a selective ionophore for a sensitive Pb-ion selective electrode. Also, the effect of immobilization of 18-crown-6 (CW), into the above membrane, on the electrode performance was discussed. The slope of the PCDT-based [I] electrode was (26–30 mV decade⁻¹), while it was (29-30 mV decade⁻¹) for (PCDT+CW)-based [II] electrode according to the doping time. The linear concentration ranges were (1×10⁻⁶–1×10⁻¹ M) and (5×10⁻⁵–1×10⁻¹ M) for electrode types [I] and [II] after one-day doping. The working pH ranges were (5.0–10.0) and (7.0–10.0) for electrode types [I] and [II], respectively. Most of the common cations were tested for the evaluation of the electrode selectivity with correlation to the ionic radii of the tested cations. Among them only Na⁺, Ag⁺ and Fe³⁺ were the real interference. Application of using the electrode for the determination of lead in lubrication oil samples was performed with RSD (0.86–1.03%). The obtained results were compared to those of an atomic absorption spectrophotometric method.     

Voltammetric determination of glucose based on reduction of copper(II)–glucose complex at lanthanum hydroxide nanowire modified carbon paste electrodes

A novel voltammetric method for the determination of β-d-glucose (GO) is proposed based on the reduction of Cu(II) ion in Cu(II)(NH₃)₄²⁺–GO complex at lanthanum(III) hydroxide nanowires (LNWs) modified carbon paste electrode (LNWs/CPE). In 0.1 mol L⁻¹ NH₃·H₂O–NH₄Cl (pH 9.8) buffer containing 5.0 × 10⁻⁵ mol L⁻¹ Cu(II) ion, the sensitive reduction peak of Cu(II)(NH₃)₄²⁺–GO complex was observed at −0.17 V (versus, SCE), which was mainly ascribed to both the increase of efficient electrode surface and the selective coordination of La(III) in LNW to GO. The increment of peak current obtained by deducting the reduction peak current of the Cu(II) ion from that of the Cu(II)(NH₃)₄²⁺–GO complex was rectilinear with GO concentration in the range of 8.0 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹, with a detection limit of 3.5 × 10⁻⁷ mol L⁻¹. A 500-fold of sucrose and amylam, 100-fold of ascorbic acid, 120-fold of uric acid as well as gluconic acid did not interfere with 1.0 × 10⁻⁵ mol L⁻¹ GO determination.     

Spectrophotometric determination of cadmium with 1-(2-pyridylazo)-2-naphthol and non-ionic surfactants Application to acetic acid extracts of ceramic enamels

The Cd-PAN system in the presence of non-ionic surfactants (polyoxyethylene nonylphenols), which dissolve the reagent and complex by formation of micelles, has been studied spectrophotometrically. The optimum conditions for Cd determination are pH 9 (Na₂B₄O₇-HClO₄), 2% of surfactant and measurement at 555 nm. The complex is Cd(PAN)₂ and its conditional formation constant is 3.5 × 10¹¹. The system obeys the Lambert-Beer law, with an error of 0.9% over the Cd concentration range 0.44–1.74 ppm; the molar absorptivity is 4.94 × 10⁴1·mole⁻¹.cm⁻¹ at 555 nm. The relative standard deviation is 0.7% and the limit of detection 0.009 μg/ml. The selectivity with respect to species important in the ceramic industry is adequate for application of the method to determination of Cd in acetic acid extracts of ceramic enamels.     

Study of the mixed-metal lanthanummagnesium-purpurin complex: spectrophotometric determination of yttrium and lanthanides

Mixtures of La(III) and Mg(II) form with purpurin (P; 1,2,4-trihydroxyanthraquinone) the mixed-metal complex LaMg₂P₅, which is extracted with methyl isobutyl ketone at pH 7.5. The molar absorptivity of the complex is 6.1 × 10⁴ l.mole⁻¹.cm⁻¹ at 570 nm and its conditional extraction constant 5 × 10¹³ l⁴.mole⁻⁴. Similar complexes have been found to be formed with yttrium, cerium, praseodymium, neodymium and samarium. The use of these complexes for the spectrophotometric determination of yttrium and lanthanides up to 15 μg has been investigated.     

Extraction and sensitive spectrophotometric determination of ytterbium with 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol

The operating conditions for the absorptiometric determination of Yb(III) with the reagent 2-(3,5-dichloro-2-pyridylazo)-5-dimethylaminophenol (3,5-diClDMPAP) by a liquid—liquid extraction technique are presented. The complex yields a molar absorptivity of 1.54 × 10⁵l.mole⁻¹.cm⁻¹ (λ_max = 588 nm) and an optimum concentration range of 0.025–1.360n mg/l., at pH = 10. The method developed has been applied to the determination of Yb(III) in synthetic and concrete mixtures.     

Simultaneous derivative spectrophotometric determination of thorium and uranium in a micellar medium

Derivative photometric methods for trace analysis of Th(IV) and UO₂(II), and their simultaneous determination in mixtures using 5,8-dihydroxy-1,4-naphthoquinone in a micellar medium are reported. Molar absorptivity and Sandell's sensitivity of 1:2 Th(IV) and 1:1 UO₂(II) complexes at their λ_max, 614.5 nm and 637.0 nm are, 1.19 × 10⁴ 1/mol/cm and 1.12 × 10⁴ 1/mol/cm and 1.95 × 10⁻² μg/cm² and 2.13 × 10⁻² μg/cm² μg/cm², respectively. Calibration graph is linear over the range 9.28 × 10⁻²−18.56 μg/ml of Th(IV) and 9.52 × 10⁻²−19.04 μg/ml of UO₂(II). Though presence of Th(IV) and UO₂(II) causes interference in each others determination, 9.28 × 10⁻¹−9.28 μg/ml Th(IV) and 9.52 × 10⁻¹−9.52 μg/ml UO₂(II) when present together, can be simultaneously determined using derivative spectra.     

Spectrophotometric determination of maneb by ternary complex formation with PAR and CTAB

A rapid, simple, direct, and sensitive method has been developed for the determination of maneb (manganese ethylenebisdithiocarbamate) based on the formation of manganese-4-(2′-pyridylazo) resorcinol complex by a ligand displacement reaction, which is rendered water soluble by a cationic surfactant cetyltrimethylammonium bromide (CTAB) by the formation of an ion association complex. Beer's law is obeyed over the concentration range 0.08–2.4 μg/ml of the final solution at 500 nm in pH range 8–12. The molar absorptivity and Sandell's sensitivity are calculated to be 8.84 × 10⁴ l.mol⁻¹.cm⁻¹ and 0.003 μg/cm², respectively. The developed method has been applied to the determination of maneb in commercial formulations, synthetic mixture, grain samples and vegetables.     

Fluorescence reaction and complexation equilibria between norfloxacin and aluminium (III) ion in chloride medium

Norfloxacin, 1-ethyl-6-fluoro-1,4-dihydro-4-oxo-7-(1-piperazinyl)-3-quinoline carboxylic acid (NORH), reacts with aluminium(III) ion forming the strongly fluorescent complex [Al(HNOR)]³⁺, in slightly acidic medium. The complex shows maximum emission at 440 nm with excitation at 320 nm. The fluorescence intensity is enhanced upon addition of 0.5% sodium dodecylsulphate. Fluorescence properties of the Al-NOR complex were used for the direct determination of trace amounts of NOR in serum. The linear dependence of fluorescence intensity on NOR concentration, at a NOR to Al concentration ratio of 1:10, was found in the concentration range 0.001–2 μg/ml NOR with a detection limit of 0.1 ng/ml. The ability of aluminium (III) ion to form complexes with NOR was investigated by titrations in 0.1 M LiCl medium, using a glass electrode, at 298 K, in the concentration range: 2 × 10⁻⁴ ≤ [Al] ≤ 8 × 10⁻⁴; 5 × 10⁻⁴ ≤ [NOR] ≤ 9 × 10⁻⁴ mol/dm³; 2.8 ≤ pH ≤ 8.3. The experimental data were explained by the following complexes and their respective stability constants, log(β ± σ): [Al(HNOR)], (14.60 ± 0.05); [Al(NOR)], (8.83 ± 0.08); [A1(OH)₃(NOR)], (−14.9 ± 0.1), as well as several pure hydrolytic complexes of A1³⁺. The structure of the [Al(HNOR)] complex is discussed, with respect to its fluorescence properties.     

Flow-injection chemiluminescence determination of chlortetracycline using on-line electrogenerated [Cu(HIO(6))(2)](5-) as the oxidant

A novel chemiluminescence (CL) flow system for the determination of chlortetracycline is described. It is based on the direct CL reaction of chlortetracycline and [Cu(HIO₆)₂]⁵⁻ in KOH medium. The unstable [Cu(HIO₆)₂]⁵⁻ was on-line electrogenerated by constant-current electrolysis. The CL intensity was linear with chlortetracycline concentration in the range of 0.1–100 μg ml⁻¹. The determination limit was 5.3×10⁻⁸ g ml⁻¹. The whole process could be completed in 1 min. The proposed method is suitable for automatic and continuous analysis, and has been applied satisfactorily to analysis of chlortetracycline in biological fluid.     

Spectral characterization of a novel near-infrared cyanine dye: a study of its complexation with metal ions

The spectral features of the near-infrared (NIR) dye TG-170 in different solutions and its complexation with several metal ions were investigated. The absorbance maxima of the dye are at λ=819, 805, and 791 nm in dimethyl sulfoxide (DMSO), methanol, and a buffer of pH 5.9, respectively. These values match the output of a commercially available laser diode (780 nm), thus making use of such a source practical for excitation. The emission wavelengths of the dye are at λ_em =822, 812, and 803 nm in DMSO, methanol, and the buffer, respectively. The molar absorptivity and fluorescence quantum yield increase accordingly. The addition of either an Al(III) ion or Be(II) ion resulted in fluorescence quenching of the dye. The Stern–Volmer quenching constant, K_SV, was calculated from the Stern–Volmer plot to be K_SV=3.11×10⁵ M⁻¹ for the Al(III) ion and K_SV=1.17×10⁶ M⁻¹ for the Be(II) ion. The molar ratio of the metal to the dye was established to be 1:1 for both metal ions. The stability constant, K_S, of the metal–dye complex was calculated to be 4.37×10⁴ M⁻¹ for the Al–dye complex and 1.94×10⁶ M⁻¹ for the Be–dye complex.     

Synthesis, structure and non-linear optical property of a copper(II) thiocyanate three-dimensional supramolecular compound

A novel copper(II) thiocyanate complex [Cu(im)₂(NCS)₂] 1 (im=imidazole) has been prepared and characterized by spectroscopic analysis and crystallographic method. This supramolecular compound exhibits a three-dimensional solid state structure constituted by N–HS hydrogen bonds and π–π stacking interactions. The compound in DMF solutions has a very strong third-order non-linear optical (NLO) behavior with absorption coefficient and refractive index ₂=1.18×10⁻¹¹ mw⁻¹, n₂=−9.00×10⁻¹⁶ m²w⁻¹, respectively, and third-order NLO susceptibility χ⁽³⁾ of 7.00×10⁻¹⁰ esu.     

A fluorescent chemosensor for cobalt ions based on a multi-substituted phenol-ruthenium(II) tris(bipyridine) complex

An amide-linked 2,6-bis{[(2-hydroxy-5-tert-butylbenzyl)(pyridyl-2-methyl)-amino]-methyl}-4-methylphenol-ruthenium(II) tris(bipyridine) 2PF₆⁻ complex, 1, was first used to recognize Co(II) in EtOH/H₂O (1:1, v/v) solution, with the ruthenium(II) tris(bipyridine) moiety selected as a fluorophore and the multi-substituted phenol unit chosen as a receptor. The fluorescence quenching of 1 was attributed to the formation of an inclusion complex between multi-substituted phenol unit and Co(II) by 1:1 complex ratio (K = 2.5 × 10⁵), which has been utilized as the basis of the fabrication of the Co(II)-sensitive fluorescent chemosensor. The analytical performance characteristics of the proposed Co(II)-sensitive chemosensor were investigated. The sensor can be applied to the quantification of Co(II) with a linear range covering from 1.0 × 10⁻⁷ to 5.0 × 10⁻⁵ M and a detection limit of 5 × 10⁻⁸ M. The experiment results show that the response behavior of 1 to Co(II) is pH-independent in medium condition (pH 4.5–9.5) and show excellent selectivity for Co(II) over transition metal cations except Cu(II). The chemosensor has been used for determination of Co(II) in water samples.     

Sensitive spectrophotometric determination of traces of zirconium with 2-(6-bromo-2-benzothiazolylazo)-5-diethylaminophenol in the presence of sodium lauryl sulphate

A simple and highly sensitive procedure for spectrophotometric determination of zirconium has been developed. At pH 4.6, zirconium reacts with 2-(6-bromo-2-benzothiazolylazo)-5-diethylaminophenol in the presence of sodium lauryl sulphate to form a red-violet complex, which has an absorption maximum at 520 nm. The molar absorptivity at 520 nm is 4.4 × 10⁵ 1.mole⁻¹ .cm⁻¹. Beer's law is obeyed for 0.25–1.50 μg of zirconium in 25 ml of solution. The method has been used in the determination of zirconium in aluminium alloy and steel samples.     

Spectrophotometric determination of iron(II) after separation by adsorption of its complex with 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine and tetraphenylborate on microcrystalline naphthalene

Trace iron(II) is determined spectrophotometrically after adsorption of its ternary complex with 3-(4-phenyl-2-pyridyl)-5,6-diphenyl-1,2,4-triazine and tetraphenylborate on microcrystalline naphthalene at pH 5.1–7.4. The absorption maximum is at 567 nm; the molar absorptivity is 2.9 × 10⁴lmole⁻¹cm⁻¹.     

Equilibria and kinetics of the extraction of gallium with 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone

The equilibria and kinetics of the solvent extraction of gallium(III) from aqueous monochloroacetic acid [HA] media with a benzene solution of 1-phenyl-3-methyl-4-benzoyl-5-pyrazolone [PMBP or HL] has been studied at 25 ± 0.1° and an ionic strength of 0.2. The species extracted was found to be GaL₃. The value of the acid dissociation constant of PMBP determined spectrophotometrically was 1.17 × 10⁻⁴. The values of the partition coefficient of PMBP and the extraction constant of its gallium complex between an aqueous and a benzene phase were found to be 3.72 × 10³ and 2.51 × 10⁴, respectively. The rate of extraction was first-order with respect to the concentrations of gallium(III) in the aqueous phase and PMBP in the organic phase, inversely first- and second-order with respect to the hydrogen-ion concentration and zero- and first-order with respect to the concentration of monochloroacetate ions. Two mechanisms operate for this extraction, depending on the pH of the aqueous phase, one where the formation of the first complex, GaL²⁺, between Ga³⁺ and L⁻ in the region of pH < 1.6 becomes the rate-determining step, and the other where the formation of the first complex between GaA²⁺ and L⁻ in the region of pH 2.0–2.3 is the rate-determining step. The rate constant for the first of these reactions was calculated to be 1.62 × 10⁴l.mole⁻¹.sec⁻¹, but that for the second could not be determined.     

New aspects of the reaction of silver(I) cations with the ethylenediaminetetraacetate ion

The highly neutralized ethylenediaminetetraacetate (EDTA) titrant (95–99% as Y⁴⁻ anion) precipitates with Ag⁺ cations to form the Ag₄Y species, in aqueous medium, which is well characterized from conductometric titration, thermal analysis and potentiometric titration of the silver content of the solid. The precipitate dissolves in excess Y⁴⁻ to form a complex, AgY³⁻. Equilibrium studies at 25°C and ionic strength 0.50 M (NaNO₃) have shown from solubility and potentiometric measurements that the formation constant (95% confidence level) β₁ = (1.93 ± 0.07) × 10⁵ M⁻¹ and the solubility products are K_S0 = [Ag +]⁴[Y⁴⁻] = (9.0 ± 0.4) × 10⁻¹⁸ M⁵ and K_S1 = [Ag +]³[AgY³⁻] = (1.74 ± 0.08) × 10⁻¹² M⁴. The presence of Na⁺, rather than ionic strength, markedly affects the equilibrium; the data at ionic strength 0.10 M are: β₁ = (1.19 ± 0.03) × 10⁶ M⁻¹, K_S0 = (1.6 ± 0.4) × 10⁻¹⁹ M⁵ and K_S1 = (1.9 ± 0.5) × 10⁻¹³ M⁴; at ionic strength tending to zero; β₁ = (1.82 ± 0.05) × 10⁷ M⁻¹, K_S0 = (2.6 ± 0.8) × 10⁻²² M⁵ and K_S1 = (5 ± 1) × 10⁻¹⁵ M⁴. The intrinsic solubility is 2.03 mM silver (I) in 0.50 M NaNO₃. Well-defined potentiometric titration curves can be taken in the range 1–2 mM with the Ag indicator electrode. Thermal analysis revealed from differential scanning calorimetry a sharp exothermic peak at 142°C; thermal gravimetry/differential thermal gravimetry has shown mass loss due to silver formation and a brown residue, a water-soluble polymeric acid (decomposition range 135–157°C), tending to pure silver at 600°C, consistent with the original Ag₄Y salt.     

Simultaneous potentiometric determination of ClO(3)(-)-ClO(2)(-) and ClO(3)(-)-HClO by flow injection analysis using Fe(III)-Fe(II) potential buffer

A rapid potentiometric flow injection technique for the simultaneous determination of oxychlorine species such as ClO₃⁻–ClO₂⁻ and ClO₃⁻–HClO has been developed, using both a redox electrode detector and a Fe(III)–Fe(II) potential buffer solution containing chloride. The analytical method is based on the detection of a large transient potential change of the redox electrode due to chlorine generated via the reaction of the oxychlorine species with chloride in the potential buffer solution. The sensitivities to HClO and ClO₂⁻ obtained by the transient potential change were enhanced 700–800-fold over that using an equilibrium potential. The detection limit of the present method for HClO and ClO₂⁻ is as low as 5×10⁻⁸ M with use of a 5×10⁻⁴ M Fe(III)–1×10⁻³ M Fe(II) buffer containing 0.3 M KCl and 0.5 M H₂SO₄. On the other hand, sensitivity to ClO₃⁻ was low when a potential buffer solution containing 0.5 M H₂SO₄ was used, but could be increased largely by increasing the acidity of the potential buffer. The detection limit for ClO₃⁻ was 2×10⁻⁶ M with the use of a 5×10⁻⁴ M Fe(III)–1×10⁻³ M Fe(II) buffer containing 0.3 M KCl and 9 M H₂SO₄. By utilizing the difference in reactivity of oxychlorine species with chloride in the potential buffer, a simultaneous determination method for a mixed solution of ClO₃⁻–ClO₂⁻ or ClO₃⁻–HClO was designed to detect, in a timely manner, a transient potential change with the use of two streams of potential buffers which contain different concentrations of sulfuric acid. Analytical concentration ranges of oxychlorine species were 2×10⁻⁵–2×10⁻⁴ M for ClO₃⁻, and 1×10⁻⁶–1×10⁻⁵ M for HClO and ClO₂⁻. The reproducibility of the present method was in the range 1.5–2.3%. The reaction mechanism for the transient potential change used in the present method is also discussed, based on the results of batchwise experiments. The simultaneous determination method was applied to the determination of oxychlorine species in a tap water sample, and was found to provide an analytical result for HClO, which was in good agreement with that obtained by the o-tolidine method and to provide a good recovery for ClO₃⁻ added to the sample.