核-壳型白藜芦醇分子印迹微球研制及应用

以表面修饰乙烯基团的SiO2微球为基体,白藜芦醇为模板分子,丙烯酰胺(AA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,采用表面印迹技术制备核-壳型白藜芦醇印迹微球。采用红外光谱(IR)、扫描电子显微镜(SEM)对该分子印迹微球进行表征,结果表明,SiO2表面成功接枝一层厚度为200nm的印迹聚合物,该印迹微球颗粒分散均匀。采用高效液相色谱技术对印迹微球的吸附性进行研究表明,此印迹微球具有良好的识别性能,利用Scatchard模型分析得出印迹微球的最大吸附量分别为Qmax1=9.087mg/g和Qmax2=13.80mg/g。此印迹微球成功用于分离虎杖提取液中白藜芦醇。     

硅胶表面亮菌甲素分子印迹聚合物的制备及其性能研究

采用光接枝印迹方法,在硅胶微球表面制备了以亮菌甲素为模板分子、2-乙烯基吡啶为功能单体的分子印迹聚合物,采用荧光法优选了功能单体及比例,进一步用荧光法对印迹聚合物的吸附特性和印迹效率进行评价.结果表明.该印迹聚合物对模板分子具有特异吸附性能,印迹效率为48.6%.     

核-壳型苏丹红Ⅰ印迹聚合物微球制备及应用研究

以苏丹红Ⅰ为模板分子,苯基-三甲氧基硅烷(PTMOS)为功能单体,乙二醇二甲基丙烯酸酯(EGD-MA)为交联剂,偶氮二异丁腈(AIBN)为引发剂,采用表面分子印迹技术,在自制的SiO2微球表面成功合成了对苏丹红Ⅰ具有良好选择识别性能的核-壳型印迹聚合物。采用红外光谱和扫描电子显微镜对分子印迹微球进行表征,结果表明该印迹聚合材料壳层厚度约为150 nm;采用静态吸附实验研究印迹材料对模板聚合物的吸附性能和选择特性,结果表明以PTMOS为功能单体的印迹聚合物对苏丹红Ⅰ具有优异的选择吸附性,其分离选择因子为2.62。在吸附过程中,模板分子苏丹红Ⅰ与印迹聚合物形成2种结合位点,2种结合位点的解离常数分别为2.30、10.78 mmol/L,最大表观结合量分别为27.40、128.53μmol/g。将该印迹聚合物作为固相萃取材料,对样品进行固相萃取,结合液相色谱技术成功用于辣椒油中苏丹红Ⅰ的测定。     

核-壳型过氧化苯甲酰印迹溶胶-凝胶聚合物的制备及应用

以过氧化苯甲酰为模板分子,采用溶胶-凝胶印迹技术在自制的二氧化硅微球表面成功制备对过氧化苯甲酰具有特异性吸附能力的核-壳型印迹材料,并由红外光谱、扫描电镜和差热分析表征了印迹聚合物。该印迹微聚合物分散性好、热稳定好、平均粒径为300nm,印迹聚合物的壳层厚度为50nm。用高效液相色谱研究了印迹聚合物的吸附性能,结果表明该印迹聚合物对过氧化苯甲酰的选择系数为6.59。作为固相萃取材料,该印迹材料已被成功用于面粉中过氧化苯甲酰的分离和富集,回收率为94.98%。     

表面接枝分子印迹聚合物微球的合成及评价

将聚苯乙烯-二乙烯苯微球表面功能基化, 引入引发转移终止剂(initiator-transfer-terminator agent, iniferter), 以活性自由基聚合方式研究了球形树脂表面合成印迹聚合物的方法. 在紫外光引发下, 以左旋麻黄碱为印迹分子, 甲基丙烯酸为功能单体, 在接枝Iniferter后的微球表面进行分子印迹聚合物接枝实验, 并使用不同的反应条件, 探讨了表面接枝印迹层微球制备条件对于识别能力的影响. 平衡吸附的结果表明, 表面接枝聚苯乙烯-二乙烯苯微球对于印迹分子具有亲和能力及选择性, 其识别能力来自于印迹得到的识别位点.     

光接枝表面修饰法制备牛血红蛋白的分子印迹微球

聚苯乙烯球载体表面经引发转移终止剂修饰后, 采用光接枝表面印迹方法制备了以牛血红蛋白(BHb)为模板分子、丙烯酰胺为功能单体和N,N′-亚甲基双丙烯酰胺为交联剂的分子印迹聚合物微球(MIP). 进一步采用红外光谱(IR)、扫描电子显微镜(SEM)和元素分析对聚合物微球进行了表征, 证实了载体表面成功地接枝了分子印迹层, 并研究了其吸附性能和分子识别选择性能. 结果表明, 采用光接枝表面修饰法制备的分子印迹微球对模板分子有着很好的吸附容量和识别选择性.     

核-壳介孔SiO_2微球的超微结构及拉曼光谱分析

采用溶胶-凝胶法制备了核-壳介孔SiO2微球,分别利用透射电镜和拉曼光谱对该微球的超微结构进行了观察及光谱分析。结果表明:制备的核-壳介孔SiO2微球是由外表面孔径为7nm、厚度30nm的有序介孔SiO2壳层,包裹着核直径为200nm的实心SiO2微球所组成,介孔壳层具有较大的比表面积,具有良好的光谱性质。     

TNT分子印迹聚合物微球的合成与性能研究

以三硝基甲苯(TNT)为模板分子,EDMA为交联剂,采用沉淀聚合法制备了TNT分子印迹微球.讨论了溶剂用量、模板分子用量、功能单体种类等对分子印迹微球的形貌及吸附性能的影响;利用紫外吸收光谱和BET表征了印迹聚合物微球的结合位点相互作用与印迹孔穴结构;通过平衡吸附和选择性吸附实验,研究了印迹聚合物微球的吸附性能和选择性识别性能.结果表明,以丙烯酰胺为功能单体制备的分子印迹聚合物为规则的球形,内部含有分子印迹孔穴,微球的粒径为1～2μm.印迹聚合物微球可在30 min内达到吸附平衡,在1 mmol/L的TNT乙醇溶液中,印迹聚合物微球的平衡吸附量为32.5 mmol/kg,对TNT分离系数为25.19,具有较好的特异性吸附能力,并可选择性识别TNT分子.     

邻苯二甲酸二异辛酯表面印迹聚合物的制备及其固相萃取应用

采用复合二氧化硅微球(H-SiO2)作为载体,以邻苯二甲酸二异辛酯(DIOP)为模板分子,甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EGDMA)为交联剂,制备了邻苯二甲酸二异辛酯表面印迹聚合物(H-SiO2@MIP)。 分别采用扫描电子显微镜和红外光谱对该印迹聚合物进行了观察和表征,结果表明,制备出的印迹聚合物呈球形,印迹壳层厚度为60~70 nm。 采用高效液相色谱技术对该印迹聚合物的吸附性能进行了检测,结果表明,该印迹聚合物对塑化剂DIOP表现出特异性吸附性能,最大吸附容量为50.35 mg/g,DIOP对于邻苯二甲酸二丁酯(DBP)和邻苯二甲酸二乙酯(DEP)的选择因子(β)分别为2.31和2.47。 将该印迹聚合物装填于固相萃取柱中,结合液相色谱检测技术,能对牛奶样品中的塑化剂DIOP进行有效分离、富集和检测。     

新型室温酯化法接枝聚合物改性SiO_2纳米微粒

提出了一种在室温、大气环境等温和条件下通过酯化反应将端羧基聚合物链接枝到纳米SiO2微球表面从而制备有机/无机复合纳米微粒的新方法.该方法通过以下两个步骤得以实现,即第一,用3-环氧丙基三甲氧基硅烷对纳米SiO2微球表面进行改性处理,接着将引入到纳米SiO2表面的环氧基团转化为烷羟基基团;第二,通过引入到纳米SiO2微球表面的烷羟基与聚合物中的端羧基在室温下发生酯化反应,从而将聚合物接枝到纳米SiO2表面制得复合微球.利用XPS、FTIR、TEM和TGA等测试手段对纳米SiO2的改性过程以及聚合物接枝后得到的复合微球进行了表征.研究结果表明,该室温酯化接枝方法具有较高的接枝率,接枝到无机纳米微粒表面的聚合物占复合微球质量的55wt%～70wt%;接枝聚合物后,纳米SiO2微球的粒径从40nm增加到64～75nm,从而得到了以SiO2为核、以聚合物为壳的有机-无机复合微球.     

Selective separation of magnolol using molecularly imprinted membranes

Molecularly imprinted membranes (MIMs) for selective separation of magnolol were prepared by thermal polymerization using magnolol as the template, ethylene glycol dimethacrylate (EGDMA) as the cross‐linker, 2,2‐azobisisobutyronitrile (AIBN) as the initiator, organic solvent as the porogen, methacrylamide (MAM) and acrylic acid (AA) as the functional monomers and cellulose acetate as the agglutinant. Commercial filter paper was used as the supporting material. The effects of different porogens and the ratio of functional monomers on the binding and recognition capacity of MIMs were investigated, and the morphology of the membranes was examined by scanning electron microscopy (SEM). The results showed that the MIMs have the highest selectivity to magnolol when the ratio of MAM/AA was 1:4 and tetrahydrofuran (THF) with dimethyl sulfoxide (DMSO) was used as the porogen. The morphology of the imprinted membranes after template extracting is much rougher with big cavities than that of the non‐imprinted membranes (NIMs) and the imprinted membranes before template extracting. The MIMs can selectively separate the magnolol.     

Validation and application of modeling algorithms for the design of molecularly imprinted polymers

In the study, four different semiempirical algorithms, modified neglect of diatomic overlap, a reparameterization of Austin Model 1, complete neglect of differential overlap and typed neglect of differential overlap, have been applied for the energy optimization of template, monomer, and template‐monomer complexes of imprinted polymers. For phosmet‐, estrone‐, and metolcarb‐imprinted polymers, the binding energies of template‐monomer complexes were calculated and the docking configures were assessed in different molar ratio of template/monomer. It was found that two algorithms were not suitable for calculating the binding energy in template‐monomers complex system. For the other algorithms, the obtained optimum molar ratio of template and monomers were consistent with the experimental results. Therefore, two algorithms have been selected and applied for the preparation of enrofloxacin‐imprinted polymers. Meanwhile using a different molar ratio of template and monomer, we prepared imprinted polymers and nonimprinted polymers, and evaluated the adsorption to template. It was verified that the experimental results were in good agreement with the modeling results. As a result, the semiempirical algorithm had certain feasibility in designing the preparation of imprinted polymers.     

Recognition characteristics of dibenzofuran by molecularly imprinted polymers made of common polymers

Dibenzofuran (DBF) recognition was studied by a molecularly imprinted polymer (MIP) made of commercially available polymers: polyvinyl chloride (PVC), polysulfone, polystyrene, and polyacrylonitrile. Preparation of MIPs was carried out by phase inversion of the polymer. Respective polymer solutions were coagulated with DBF template in water (non-solvent). In addition, reference polymers without the template were prepared in same manner as unimprinted polymers. After the DBF template was extracted from the solidified polymers by washing with methanol (MeOH), recognition experiments of DBF by the imprinted polymers were carried out for DBF in MeOH solutions. Equilibrium constants for DBF were calculated from saturation binding kinetics. Equilibrium experiment results reveal that recognition was effective for DBF binding to the DBF-imprinted polymer, especially for the imprinted PVC.     

Design of EGDMA‐Crosslinked Theophylline Imprinted Polymer with High Specificity and Selectivity

An attempt has been made to design theophylline selective polymers with maximum selectivity and specificity, and to relate the rebinding capacity of the polymers with the degree of crosslinking, as well as with the template‐monomer ratio. The theophylline imprinted and non‐imprinted polymers based on methacrylic acid as the functional monomer and ethylene glycol dimethacrylate (EGDMA) as crosslinking agent (35–80 mol%) were prepared. The developed imprinted polymers were characterized by FT‐IR, ¹H and ¹³C‐NMR spectra. Equilibrium binding of theophylline by the imprinted and non‐imprinted polymers were investigated and optimized the conditions. Imprinted polymers showed specific binding of the template theophylline. Selectivity of the imprinted polymers was investigated towards caffeine and nicotine. Imprinted polymers showed specific and selective binding of theophylline, which varied with the degree of EGDMA crosslinking. Equilibrium rebinding experiments proved that imprinted polymer with moderate (70%) crosslinking with 1∶2 template‐functional monomer ratio is ideal with maximum specificity and selectivity.     

Molecularly Imprinted Polymer with Calix[4]arene Derivative for the Recognition of Acetanilide

Two molecularly imprinted polymers binding to analgesic acetanilide were prepared using either dual functional monomers of calix[4]arene derivative and acrylamide or single monomer acrylamide, respectively. The polymers were ground, sieved and investigated by equilibrium binding experiment to evaluate their recognition properties for the template and other substrates. Scatchard analysis showed that homogeneous recognition sites were formed in the imprinted polymer matrix. Our results demonstrated that the polymer using two functional monomers exhibited better selectivity for the template. This study may open new frontiers for the development and application of imprinted polymers, such as drug separation and purification.     

Preparation and application of hollow molecularly imprinted polymers with a super‐high selectivity to the template protein

Protein‐imprinted polymers with hollow cores that have a super‐high imprinting factor were prepared by etching the core of the surface‐imprinted polymers that used silica particles as the support. Lysozyme as template was modified onto the surface of silica particles by a covalent method, and after polymerization and the removal of template molecules, channels through the polymer layer were formed, which allowed a single‐protein molecule to come into the hollow core and attach to the binding sites inside the polymer layer. The adsorption experiments demonstrated that the hollow imprinted polymers had an extremely high binding capacity and selectivity, and thus a super‐high imprinting factor was obtained. The as‐prepared imprinted polymers were used to separate the template lysozyme from egg white successfully, indicating its high selectivity and potential application in the field of separation of protein from real samples.     

合成引发方式对槲皮素-钴(Ⅱ)配位印迹聚合物结构与性能的影响

以槲皮素-钴(Ⅱ)的配合物为模板分子,在强极性甲醇溶剂中分别采用低温光引发和高温热引发聚合制备槲皮素-钴(Ⅱ)配位印迹聚合物.紫外-可见光谱分析确定了槲皮素与钴(Ⅱ)形成配合物的最佳配位比.根据印迹聚合物的平衡结合量优化功能单体丙烯酰胺用量.利用红外光谱、透射电镜和平衡结合实验,考察不同引发方式对聚合物的结构、微观形貌及结合性能的影响.进一步通过特异吸附容量和印迹指数确定,低温光引发聚合更适于配位分子印迹聚合物的制备.同时研究了不同阳、阴离子对印迹聚合物选择识别性的影响.结果表明光引发的金属配位分子印迹聚合物具有良好的吸附选择性,印迹指数可达3.919.     

Signaling molecularly imprinted polymers: molecular recognition-based sensing materials

Molecular imprinting is a template polymerization technique that can easily provide synthetic polymers capable of molecular recognition for given target molecules. In addition to their highly specific recognition ability, we are attempting to introduce signaling functions to molecularly imprinted polymers, enabling them to respond according to specific binding events. Some of our work regarding such signaling molecularly imprinted polymers is presented here, including molecularly imprinted polymers that induce spectral shifts of target compounds because of binding. Such compounds include hydrogen-bonding-based fluorescent imprinted polymers and metalloporphyrin-based signaling molecularly imprinted polymers.     

Synthesis of stationary phases that provide group recognition for polychlorinated biphenyls by porogenic fragment template imprinting

Molecular recognition based on imprinted polymers results from the polymerization of functional monomers and cross‐linkers in the presence of a target analyte (i.e. template), with subsequent removal of the template to create synthetic binding sites. However, complete removal of the template is difficult to achieve, thereby leading to template leaching, which adversely affects real‐world analytical applications. To overcome this challenge, the present study utilizes porogenic fragment template imprinting techniques to provide an alternative synthetic strategy to generate molecularly imprinted polymers with molecular recognition toward polychlorinated biphenyls. Thereafter, thus‐generated imprinted polymers have been applied as stationary phases in molecularly imprinted solid‐phase extraction for preconcentrating six “indicator polychlorinated biphenyls” in both organic and aqueous media. Recoveries of up to 98.9% (imprinted polymers) versus 73.0% (conventional C₁₈) in an organic phase, and up to 97.4% (imprinted polymers) versus 89.4% (C₁₈) in an aqueous phase have been achieved corroborating the utility of this advanced sorbent material. Finally, porogenic fragment template imprinting strategies have yielded molecularly imprinted polymers that are useful for the quantitative determination of polychlorinated biphenyls in environmental matrices, which provides a low‐cost strategy for tailoring stationary phases that avoid template leaching in applications in solid‐phase extraction as well as liquid chromatography.     

Study of the interactions between protein-imprinted hydrogels and their templates

The interactions between lysozyme-imprinted hydrogel and their template protein were studied using adsorption measurements, competitive adsorption experiments, and isothermal titration calorimetry (ITC). The results were compared to the interactions between the imprinted polymer and a reference protein, cytochrome c. Experimental adsorption isotherms and competitive adsorption studies detected better affinity and higher capacity of the imprinted polymer toward the template protein. Moreover, analysis of ITC data identified major differences in the binding enthalpy of lysozyme when the imprinted and the non-imprinted polymers were compared. On the other hand, cytochrome C did not exhibit any major changes in the adsorption enthalpy when comparing the imprinted and the non-imprinted polymers. This is the first thermodynamic evidence for the creation of new binding sites in the process of protein imprinting.