生物活性复合材料在生物矿化过程中的微观形貌与离子浓度变化

采用3-羟基丁酸酯-3-羟基戊酸酯的共聚物(PHBV)与磷酸三钙(TCP)、羟基磷灰石(HA)、生物活性玻璃(BG)等进行复合,获得了性能优良的生物活性骨组织工程支架材料和骨修复材料.研究和比较了3种复合材料在体外模拟生理环境中发生的生物矿化反应,对比了反应前后因矿化物的形成导致的表面微观形貌的变化,通过检测反应液离子浓度的变化对不同材料的矿化过程和生物活性进行了定量表征.研究结果表明,3种复合材料在模拟生理溶液中发生生物矿化的过程和程度不同,其中PHBV/BG的生物活性反应最为明显.     

Macroporous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) matrices for cartilage tissue engineering

Polymer scaffold systems consisting of poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) were investigated for possible application as a matrix for the three-dimensional growth of chondrocyte culture. The PHBV scaffolds were fabricated by a compression moulding, thermal processing and salt particulate leaching method without using organic solvent. The porous structure of the scaffolds was investigated with an optical microscope (OM) and scanning electron microscope (SEM) and the porosity was calculated. Then, the chondrocytes were cultured on the PHBV scaffolds for lone time to investigate whether it can be applied to construct the cartilage tissue in vitro. The results showed that the chondrocytes maintained their activity, fully expressed their phenotype and produced the extracellular matrix after incubation in vitro on the scaffolds for 7 days. In addition, in the prolonged incubation time, the percent of chondrocytes in their nature round morphology increased with an increase in the incubation period and they could synthesize the type II collagen and cartilage-specific proteoglycans. All of these results showed that the PHBV scaffolds had the potential to be used as chondrocytes carrier for cartilage engineering.     

Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering

This study focused on the fabrication of calcium phosphate (Ca-P)/poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV) nanocomposite scaffolds loaded with biomolecules using the selective laser sintering (SLS) technique and their evaluation. Ca-P/PHBV nanocomposite microspheres loaded with bovine serum albumin (BSA) as the model protein were fabricated using the double emulsion solvent evaporation method. The encapsulation efficiency of BSA in PHBV polymer microspheres and Ca-P/PHBV nanocomposite microspheres were 18.06 ± 0.86% and 24.51 ± 0.60%, respectively. The BSA loaded Ca-P/PHBV nanocomposite microspheres were successfully produced into three-dimensional porous scaffolds with good dimensional accuracy using the SLS technique. The nanocomposite microspheres served as protective carriers and maintained the bioactivity of BSA during SLS. The effects of SLS parameters such as laser power and scan spacing on the encapsulation efficiency of BSA in the scaffolds and in vitro BSA release were studied. An initial burst release was observed, which was followed by a slow release of BSA. After 28-day release, The PHBV matrix was slightly degraded after 28-day in vitro release study. It was shown that nanocomposite scaffolds with controlled architecture obtained via SLS could be incorporated with biomolecules, enhancing them with more functions for bone tissue engineering application or making them suitable for localized delivery of therapeutics.     

β-羟基丁酸与β-羟基戊酸共聚物 (PHBV)/蒙脱土纳米复合材料的结构与性能

用溶液复合法成功地制备了插层型PHBV／蒙脱土纳米复合材料。采用X射线衍射（XRD）和透射电子显微镜（TEM）研究了复合材料的结构，硅酸盐片层间距从1.8nm升至2.4nm左右。同时研究了复合材料的结晶，熔融，动态力学行为和力学性能，发现有机蒙脱土的加入，可以加快PHBV的结晶,降低熔融温度，使基体的玻璃化转变温度升高，提高了材料的力学性能，有机蒙脱土含量在3％时，其综合性能最佳。     

PHBV/Sol-gel Bioglass多孔材料在模拟生理溶液中的化学反应研究

3-羟基丁酸-co-3-羟基戊酸共聚物(PHBV)/生物活性玻璃(SGBG)是一种用于骨和软骨组织工程支架的新型多孔复合材料,本文探讨了PHBV/SGBG在模拟生理溶液中的一系列化学反应,以及多孔材料在模拟生理溶液中浸泡后的成分和结构变化.研究结果表明,在SBF溶液中浸泡后,SGBG与SBF溶液的离子交换反应和PHBV的降解反应使SBF溶液的离子浓度发生变化,并在PHBV/SGBG表面形成了结晶态类骨碳酸羟基磷灰石.     

Cellulose nanocrystals as biobased nucleation agents in poly-l-lactide scaffold: Crystallization behavior and mechanical properties

The mechanical strength of polymer scaffold is closely related to its crystallinity. In this work, cellulose nanocrystals (CNC) were incorporated into poly-l-lactide (PLLA) scaffold which was fabricated by selective laser sintering, aiming to improve the mechanical properties. CNC possesses numerous hydroxyl groups which might form hydrogen bond with PLLA molecular chains. The hydrogen bond induces the ordered arrangement of PLLA chain by using CNC as heterogeneous nucleating agent, thereby increasing crystallization rate and crystallinity. Results showed that PLLA scaffolds with 3 wt% CNC resulted in 191%, 351%, 34%, 83.5%, 56% increase in compressive strength, compressive modulus, tensile strength, tensile modulus and Vickers hardness, respectively. Encouragingly, with the incorporation of hydrophilic CNC, the PLLA/CNC scaffolds showed not only better hydrophilicity, but also faster degradation than PLLA. In vitro cell culture studies proved that the PLLA/CNC scaffolds were biocompatible and capable of supporting cell adhesion, proliferation and differentiation. The above results indicated that the PLLA/CNC scaffolds may therefore be a potential replacement in bone repair.     

Thermal and mechanical properties of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) plasticized by biodegradable soybean oils

The effects of soybean oil (SO) and epoxidized soybean oil(ESO) as biodegradable plasticizers for poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) were studied using thermal and mechanical analyses. PHBV/SO and PHBV/ESO blends were prepared by evaporating solvent from blend solutions. The levels of additive in the blend varied from 5% to 30%. As a plasticizer for PHBV, ESO was more effective than SO in depression of the glass transition temperature as well as in increasing the elongation at break and the impact strength of the films with increasing levels of additive. Biodegradation of the plasticized PHBV films was carried out by accelerated compost method. The degradation rates of the blend films with SO or ESO were found to be faster than that of PHBV film. From the thermogravimetric analysis, it was found that the thermal reaction between the epoxide groups of ESO and PHBV fragments with carboxylic chain ends, occurred during the degradation of PHBV/ESO blends.     

STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel…     

Crystallization behavior and thermal properties of blends of poly(3-hydroxybutyate-co-3-valerate) and poly(1,2-propandiolcarbonate)

Crystallization behavior of blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(1,2-propandiolcarbonate) (PR(CO₂)) has been investigated by polarized light microscopy (PLM). The spherulite growth rates (SGR) of all blends were faster than that of pure PHBV, and the spherulite growth rates of PHBV in the PHBV/PR(CO₂) blends reduced with increasing PR(CO₂) weight fraction. There are two melting peaks in both the pure PHBV and the PHBV/PR(CO₂) blends. The melting peak of PHBV/PR(CO₂) blends was reduced by lower temperature about 20K as compared to PHBV and the higher temperature melting peak was increased by about 10K in the blends.     

STUDY ON BIODEGRADABILITY OF POLY（3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE）／ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

Poly (3-lydroxybutyrate-co-3-hydroxyvalerate)/Organophilic montmorillonite(PHBV/OMMT) nanocomposites were prepared and the biodegradability of the PHBV/OMMT nanocomposites was studied by a cultivation degrading method in soil suspension The relationship between structure and biodegradability of PHBV/OMMT nanocomposites was investigated. The results showed that the biodegradability of PHBV/OMMT nanocomposites decreased with increasing amount of OMMT and it was related to the number of PHBV degrading microorganisms in degradation environment, the anti-microbial property of OMMT and the degree of crystallinity of the nanocomposites.     

MicroRNA-103a-3p controls proliferation and osteogenic differentiation of human adipose tissue-derived stromal cells

The elucidation of the molecular mechanisms underlying the differentiation and proliferation of human adipose tissue-derived stromal cells (hADSCs) represents a critical step in the development of hADSCs-based cellular therapies. To examine the role of the microRNA-103a-3p (miR-103a-3p) in hADSCs functions, miR-103a-3p mimics were transfected into hADSCs in order to overexpress miR-103a-3p. Osteogenic differentiation was induced for 14 days in an osetogenic differentiation medium and assessed by using an Alizarin Red S stain. The regulation of the expression of CDK6 (cyclin-dependent kinase 6), a predicted target of miR-103a-3p, was determined by western blot, real-time PCR and luciferase reporter assays. Overexpression of miR-103a-3p inhibited the proliferation and osteogenic differentiation of hADSCs. In addition, it downregulated protein and mRNA levels of predicted target of miR-103a-3p (CDK6 and DICER1). In contrast, inhibition of miR-103a-3p with 2′O methyl antisense RNA increased the proliferation and osteogenic differentiation of hADSCs. The luciferase reporter activity of the construct containing the miR-103a-3p target site within the CDK6 and DICER1 3′-untranslated regions was lower in miR-103a-3p-transfected hADSCs than in control miRNA-transfected hADSCs. RNA interference-mediated downregulation of CDK6 and DICER1 in hADSCs inhibited their proliferation and osteogenic differentiation. The results of the current study indicate that miR-103a-3p regulates the osteogenic differentiation of hADSCs and proliferation of hADSCs by direct targeting of CDK6 and DICER1 partly. These findings further elucidate the molecular mechanisms governing the differentiation and proliferation of hADSCs.     

异相成核和拉伸诱导对生物基PHBV复合纤维结晶结构与力学性能的影响

采用熔融纺丝法制备了聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)/二硫化钨(WS_2)复合纤维.利用示差扫描量热仪(DSC)、热台偏光显微镜、二维广角射线衍射仪(2D-WXRD)、纤维强力仪研究了WS_2异相成核作用和牵伸诱导作用对纤维的结晶结构和力学性能的影响.研究表明,WS_2显著提高了PHBV的结晶温度,当使用2 wt%WS_2时,复合材料的结晶温度提高到115~130oC,比纯PHBV(99~105oC)提高了约25oC.WS_2不仅没有影响PHBV球晶的径向生长速率,且明显提高了PHBV/WS_2复合材料的晶核密度,熔体成核活性Φ由1.0降低为0.49.随着牵伸倍率和WS_2用量的增加,纤维的拉伸强度呈现出先增加后减小的趋势.当添加1 wt%WS_2并采用单向牵伸3.8倍时,纤维中的晶体取向产生了β晶结构,使复合纤维的拉伸强度由纯PHBV的37 MPa提高至155 MPa,断裂伸长率由2.4%增加至45%.     

Evolution of concentric spherulites in crystalline-crystalline poly(3-hydroxybutyrate-co-3-hydroxyvalerate)-b-poly(ethylene glycol) copolymers

Crystalline-crystalline poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly (ethylene glycol) (PEG) block copolymers (PHEGs) were synthesized by telechelic hydroxylated PHBV2000 and PEG with different number-average molecular weights. The synthesized PHEGs were analyzed using gel permeation chromatography and proton nuclear magnetic resonance. The cooling curves of the differential scanning calorimetry showed that the range of the melt-crystallization temperature of the PEG and PHBV blocks in the PHEGs partially overlapped. The spherulite of each PEG block and each PHBV block in the PHEGs crystallizes individually, but nucleated in the same site to form a concentric spherulite. The observations of the hot-stage polarized microscope (HSPM) showed that the first spherulite growth acted as a template for the later spherulite growth in the PHBV-b-PEG concentric spherulite. The spherulite growth rate of individual spherulite from the PEG block and PHBV block in PHEGs depends on the crystallization environment. The evolution of concentric spherulites in PHEGs at different crystallization conditions was studied in this study.     

Effect of multi-walled carbon nanotubes on crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

The effect of multi-walled carbon nanotubes on the crystallization behavior of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been investigated. The results have shown that carbon nanotubes (CNTs) act as an effective heterogeneous nucleation agent, inducing an increase in crystallinity and crystallite sizes. Comparing with the double melting peaks in pure PHBV, there is only one peak in the melting curves of nanocomposites. The isothermal crystallization kinetics of PHBV and its nanocomposite containing 0.5% CNTs were examined based on Avrami equation, indicating that the crystallization half-time decreases while the overall crystallization rate k increases dramatically with CNTs addition. The spherulitic nucleation and growth kinetics were also discussed grounded on Lauritzen–Hoffman equation. It is found that there is a spherulitic growth rates (G) maximum within selected temperature range in our study. Also, the temperatures corresponding to G maximum shift to a high level with addition of CNTs. The parameters of the equilibrium melting temperature T_m⁰ T_m^0 , the nucleation parameter K _g , the lateral surface free energy σ, the fold surface free energy σ _e , and the work of chain folding q of PHBV and its composite containing 0.5% CNTs were all calculated. The reductions of K _g , σ _e and q values of nanocomposite are in agreement with the fact that the crystallization rate of PHBV increases greatly by addition of CNTs.     

Surface Modification of Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) Membrane by Combining Surface Aminolysis Treatment with Collagen Immobilization

Amino groups were introduced onto a poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) surface by applying 1,6-hexanediamine treatment. The effects of aminolysis time and 1,6-hexanediamine concentration on hydrophilicity of the treated PHBV were investigated using contact angle measurement. The occurrence of the aminolysis and the introduction of NH₂ groups were verified by X-ray photoelectron spectroscopy (XPS) and ninhydrin method. By use of the NH₂ groups as active sites, collagen was further immobilized on the aminolyzed PHBV (NH₂-PHBV) membrane via a cross-linking agent, glutaraldehyde. The increase of nitrogen content and further decrease of water contact angle after immobilization of collagen suggested that the surfaces became more hydrophilic. Mouse bone marrow stromal cells (BMSc) cultured on untreated PHBV and treated PHBV films were evaluated by cell attachment, cell proliferation, and morphological observation under scanning electron microscope (SEM). The order of cytocompatibility is Coll-PHBV > NH₂-PHBV > PHBV, indicating coll-PHBV was a promising material in future tissue-engineering application.     

Synergistic effect of compatibilizer and sepiolite on the morphology of poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/poly(butylene succinate) blends

Blends of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and poly(butylene succinate) (PBS) with different PHBV/PBS weight ratios (100/0, 75/25, 50/50 and 0/100) were elaborated by melt mixing. The morphological investigation of the different samples, in comparison with that of neat PHBV and neat PBS, pointed out that PHBV/PBS blends form a biphasic system over the whole composition range. Low amount of compatibilizing agent (5 wt%), obtained by grafting maleic anhydride (MA) onto PHBV, i.e. PHBV-g-MA, was used for improving the miscibility between the two components of the blend. The incorporation of a fibrous filler as the sepiolite, easily dispersible in a polymer matrix, was also investigated. The morphology of the different blends as well as the evolution of their material properties were discussed in terms of the sepiolite and compatibilizing agent contents. The dispersion of PBS in the PHBV matrix markedly became finer with incorporation of sepiolite and PHBV-g-MA, due to enhanced interactions between the components. This paper highlighted a synergistic effect induced by the presence of both compatibilizer and sepiolite leading to an improved miscibility of the two blend components. The resulting properties were correlated with the morphology observed for the different blends.     

A study of morphological,thermal, rheological and barrier properties of Poly(3-hydroxybutyrate-Co-3-Hydroxyvalerate)/polylactide blends prepared by melt mixing

The paper aims to study blend properties of biodegradable polymers of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) and polylactide (PLA) prepared by melt mixing. Blend compositions based on PHBV/PLA were investigated according to the following weight ratios, i.e. 100/0, 75/25, 50/50, 25/75 and 0/100 wt%. The study showed through scanning electron microscopy (SEM) that blends of PHBV/PLA are not miscible. This is consistent with differential scanning calorimetry (DSC) data which indicate the presence of two distinct glass transition temperatures (T_g) and melting temperatures (T_m), attributed to the neat polymers, over all the range of blend compositions. Water and oxygen barrier properties of PHBV/PLA blends are significantly improved with increasing the PHBV content in the blend. Further, morphological analyzes indicated that increasing the PHBV content in the polymer blends results in increasing the PLA crystallinity due to the finely dispersed PHBV crystals acting as a filler and a nucleating agent for PLA. On the other hand, the addition of PLA to the blend results in a very impressive increase in the complex viscosity of PHBV. Moreover, the rheological data showed that, excluding the specific behavior of the neat polymers at low frequencies, i.e. less than 0.1 Hz, the complex viscosity of PHBV/PLA blends fits the mixing law well.     

Valorization of olive husk flour as a filler for biocomposites based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate): Effects of silane treatment

The paper deals with the influence of surface treatment of olive husk flour (OHF) by trimethoxyoctadecylsilane (TMOS) on the morphology and physical properties of bio-composites based on poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV). Biocomposites based on PHBV/OHF: 80/20 (w/w) before and after filler treatment were prepared by melt compounding, while the modification of OHF surface by TMOS was performed by thermo-chemical vapor deposition. Scanning electron microscopic observations showed that modification of OHF by TMOS led to homogeneous and finer dispersion of the filler particles in PHBV matrix, indicating improved compatibility between the two components. Further, TGA data revealed an increase in thermal stability of treated PHBV/OHF biocomposites. An increase in the crystalline index determined by DSC was also observed due to the nucleating effect of OHF in the polymer matrix, however more pronounced for the treated biocomposites. The latter exhibited better tensile properties, as confirmed by DMA results, showing higher reinforcing effect of OHF for the treated biocomposites. This study highlighted significant improvements of the properties of PHBV/OHF biocomposites through silane treatment of OHF.     

BIOSYNTHESIS AND THERMAL PROPERTIES OF POLY（3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE） WITH LARGE VARIETY OF HYDROXYVALERATE CONTENTS BY BACILLUS CEREUS

Biosynthesis and thermal properties of poly（3-hydroxybutyrate-co-3-hydroxyvalerate） （PHBV） with different HV （hydrovalerate） content produced by a Bacillus cereus strain were investigated. A large variety of HV contents （up to about 90 mol%） of PHBV could be produced by this strain. Combined nitrogen sources containing both yeast extract and ammonium sulphate were better for cell growth and polyhydroxyalkanoates （PHA） production than either yeast extract or ammonium sulphate alone. Propionic acid is more favorable for the production of HV content than that of valeric acid. Finally, thermal properties of PHBV produced by this strain are found close to the results of other groups.     

The Crystallization,Melting Behaviors and Thermal Stability of Cross-linked Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by Octavinyloctasilasesquioxane

A series of cross-linked poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/octavinyloctasilasesquioxane(PHBV/OVS)composites were obtained by a simple melt reactive processing technique. Dicumyl peroxide(DCP) and OVS were employed as a free radical initiator and a cross-linking agent, respectively. The chemical structure of these produced composites were identified by~1 H/~(13) C/~(29) Si-nuclear magnetic resonance spectroscopy(1 H/31 C/29 Si-NMR) and Fourier transform infrared spectroscopy(FTIR). The melting behavior, non-isothermal crystallization, spherulite morphology and thermal stability property of PHBV/OVS composites were also investigated. The nucleation behaviors and crystallization rate of PHBV/OVS were significantly enhanced with the formation of cross-linked networks with different side-chains and cross-linking points. The red shift of crystalline peak temperature with addition of a small amount of OVS content evidenced the higher crystalline ability compared with the neat PHBV. However there was a threshold content, beyond which the crystallization rate weakened again. Additionally, the cross-linked structure of PHBV/OVS composites could be adjusted by changing the amount of OVS.