Au掺杂方式对锐钛矿TiO2光催化性能的影响

结合超临界乙醇干燥技术, 采用沉积-沉淀(DP)和共沉淀(CP)法分别制备了具有单一锐钛矿晶相的Au/TiO2和Au(0.2%, 原子分数)-TiO2光催化剂, 通过XRD、BET、TEM、XPS和Raman手段表征样品中Au的掺杂形态, 以光催化降解甲基橙为模型反应考察了样品的光催化活性. 结果表明, DP法制备的Au/TiO2在110 ℃干燥处理后, 表面存在的Au3+能有效地促进锐钛矿TiO2光催化性能, 其一级反应速率常数比纯锐钛矿TiO2提高了3.2倍, 比商用光催化剂Degussa-P25提高了4.1倍, 而当Au3+被还原为Au0后光催化活性下降. 用CP法制备的Au-TiO2并没有较大地提高锐钛矿TiO2光催化性能, 在焙烧温度达到800 ℃时, Au向表面迁移聚集, 造成锐钛矿TiO2晶格氧空位和缺陷位增加, 使光催化活性下降.     

微量铂掺杂对TiO2粉末结构和性能的影响

采用溶胶-凝胶法制备了铂掺杂的TiO2粉末, 利用透射电子显微镜、X射线光电子能谱、紫外可见光谱和X射线衍射技术对粉末的结构和光吸收性能进行了表征. 结果表明, Pt/TiO2粉末主要含有Ti, O, Pt和C元素, 其中Pt主要以0价态存在. 573～873 K焙烧的Pt/TiO2粉末中, TiO2是锐钛矿结构, 973 K焙烧时, 有6.3%的TiO2转变为金红石结构. Pt/TiO2粉末的晶粒尺寸小, 铂和锐钛矿结构TiO2粒子都是纳米颗粒. 随焙烧温度升高, 粉末中TiO2的晶粒尺寸逐渐增大, 晶格常数a和c发生各向异性的变化, 单胞体积在相变时发生收缩. 与TiO2粉末相比, Pt/TiO2粉末中两种结构TiO2的晶格常数和晶胞体积基本上都增大了, 光谱吸收范围被明显拓展至可见光, 实现了可见光催化的基础.     

Fe掺杂对纳米TiO2薄膜的结构与光催化性能的影响

采用溶胶-凝胶法制备了Fe掺杂的TiO2薄膜,利用X射线光电子能谱、X射线衍射技术、显微共聚焦拉曼光谱、紫外可见光谱和原子力显微镜等对薄膜进行表征,以甲基橙为反应模型对光催化活性进行测试。 结果表明,在300~600 ℃焙烧时,TiO2以锐钛矿结构存在,700 ℃焙烧时出现金红石结构。 随掺铁量和焙烧温度的增加,Fe/TiO2薄膜的表面粗糙度和晶粒尺寸均逐渐增大;随镀膜层数的增加,Fe/TiO2薄膜光谱吸收向可见光方向移动;较低含量的铁掺杂改善了TiO2薄膜的光催化活性,而较高含量的铁掺杂则使TiO2薄膜的光催化活性下降,掺铁量为0.1%时Fe/TiO2薄膜的光催化活性最好。     

可见光响应的氯掺杂TiO2的制备、表征及其光催化活性

 采用HCl水解钛酸四丁酯制备了可见光响应的氯掺杂TiO2光催化剂,并用X射线衍射线、透射电子显微镜、 X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱等测试手段对其结构进行了表征. 结果表明,氯元素的引入降低了无定形相向锐钛矿转变以及锐钛矿向金红石相转变的温度. 300 ℃焙烧的氯掺杂TiO2吸收波长拓展到可见光区,且XPS证实氯元素以阴离子形式存在于TiO2晶格中. 苯酚降解实验表明, 在大于400 nm的可见光照射下, 300 ℃焙烧的氯掺杂TiO2具有最佳的光催化活性, 120 min时苯酚的降解率达到42.5%.     

胱氨酸改性TiO_2可见光下催化活性及催化机理

以胱氨酸为掺杂剂,采用溶胶-凝胶法制备了胱氨酸改性的TiO2可见光催化剂,并对其进行了TG-DTA、XRD、表面光电压光谱(SPS)及XPS表征。XRD结果表明,胱氨酸有效抑制了TiO2晶粒的生长,提高了锐钛矿向金红石相的转变温度。SPS分析结果显示,改性TiO2光催化剂可见光吸收增强,吸收带边明显红移,且胱氨酸用量为4.2%的样品光伏响应强度最大。XPS分析结果表明,胱氨酸改性TiO2样品表面的羟基含量明显增加,且O2p价带的VMB(价带最大值)值为2.3 eV,小于非改性TiO2。以罗丹明B为模型污染物,考察了胱氨酸掺杂量与焙烧温度对改性TiO2在可见光下催化性能。结果表明,胱氨酸掺杂量(相对TiO2)为4.2%、350℃焙烧的催化剂催化活性最好。波长为380～630 nm、470～800 nm的光辐射120 min后,罗丹明B的降解率分别达到91.02%、78.44%。     

蛋氨酸改性TiO2空心纳米盒高效可见光催化RhB分解和NO氧化

由高能面 TiO2纳米片 (TiO2-NSs) 组装成的 TiO2空心纳米盒 (TiO2-HNBs)显示出比单独 TiO2-NSs 更强的光催化性能, 但是 TiO2-HNBs 依然属于紫外光催化剂, 无法充分利用太阳能. 因此, 开发具有可见光响应的由高能面 TiO2-NSs 组装而成的 TiO2-HNBs 具有重要意义. 本文将立方体 TiOF2与含有 N 和 S 元素的生物分子蛋氨酸混合, 通过一步焙烧制备了具有可见光响应活性的 N 和 S 元素共掺杂的 TiO2-HNBs(掺杂催化剂标记为 TMx, 未掺杂催化剂标记为 Tx, x 代表焙烧温度).由立方体 TiOF2到锐钛矿相 TiO2空心纳米盒的转变是一个自模板转化过程. 氟离子的存在降低了 TiO2高能面(001)面的表面能, 从而使得高能面 TiO2纳米片的形成变得可能. 因此, 热处理立方体 TiOF2可得到由高能面 TiO2纳米片组装的 TiO2空心纳米盒.本文系统研究了焙烧温度 (300-500 ℃) 对所制 TiO2-HNBs 结构与光催化性能的影响. 结果发现, 在 350 ℃下焙烧, TiOF2完全转化成锐钛矿相 TiO2-HNBs. 但是焙烧蛋氨酸与 TiOF2的混合物, 需 400 ℃才能完全实现 TiOF2到锐钛矿相TiO2-HNBs 的转变. 这说明蛋氨酸的加入阻碍了 TiOF2向锐钛矿相 TiO2-HNBs 的转变. XPS 结果显示, 经过 400 ℃焙烧的蛋氨酸改性样品 (TM400), N 和 S 元素成功掺入了 TiO2-HNBs 晶格, 使其产生可见光催化活性.相对于 400 ℃焙烧 TiOF2所得样品 T400, 蛋氨酸改性的 TM400 催化剂可见光降解罗丹明 B 染料 (RhB) 和 NO 氧化的性能分别提升了 1.55 倍和 2.0 倍, 这与其更强的可见光吸收性能和光生载流子分离效率有关. 400 ℃焙烧的蛋氨酸改性的 TM400 可见光催化活性稳定, 连续 5 次可见光催化 RhB 降解后, 其活性没有明显改变, 显示了潜在的应用前景.     

一步火焰辅助热解法制备Fe掺杂嵌碳TiO2及其光催化性能

以钛酸四丁酯、无水乙醇和无水氯化铁为前驱体,通过一步火焰辅助热解法制备了Fe掺杂嵌碳TiO₂,并研究了样品的光催化活性. 利用扫描电子显微镜及能谱、X射线光电子能谱、X射线粉末衍射和紫外-可见漫反射吸收光谱等对样品的形貌、组分、晶型和光吸收进行了表征,并研究了样品在紫外和可见光下的光催化活性. 结果表明,无需后续热处理可直接得到主要是锐钛矿相TiO₂的样品,Fe³⁺以替位掺杂形式进入TiO₂晶格,随掺杂量增加,样品在可见光区域的吸光度提高,吸收带边红移. Fe掺杂量（摩尔分数）小于0.2%可改善样品的光催化活性,当Fe掺杂量为0.1%时,样品在可见光和紫外-可见光照射下均显示出最高的降解亚甲基蓝速率.     

吸附相反应技术制备TiO2的结晶过程以及光降解气相甲苯

研究了吸附相反应技术制备纳米TiO2的结晶过程, 并探讨了该过程对TiO2光催化活性的影响. 利用XRD测定了不同温度和时间焙烧后TiO2的晶型以及晶粒粒径的变化, 发现即使焙烧温度高达900 ℃, TiO2仍维持纯锐钛矿晶型. 随着焙烧温度的增加, TiO2的晶粒粒径变化不大, 均在7 nm以下, 在焙烧温度高于700 ℃时, 锐钛矿结晶峰的峰面积随温度增加, 峰面积保持不变. 改变焙烧时间基本不影响TiO2的晶型和晶粒粒径, 因而其光催化活性变化也较小. 光降解气相甲苯实验表明, 700 ℃焙烧后样品的催化活性最高, 且优于商用P25光催化剂.     

硼硫共掺杂TiO2的光催化性能及掺杂机理

采用水热法制备了硼硫共掺杂的TiO2光催化剂(TiO2-B-S),并用其光催化降解甲基橙.结果表明,在240℃下水热反应12h时制得的TiO2-B-S具有较高的催化活性,紫外光照射50min和太阳光照射230min时对甲基橙的降解率分别达99.8%和81%.X射线粉末衍射、紫外-可见漫反射光谱和X射线光电子能谱等研究表明,TiO2-B-S为锐钛矿晶型,硫硼掺杂能抑制TiO2粒径的生长;TiO2-B-S同时具有较高的紫外光和可见光活性的原因可能是掺杂的硼以B3 进入晶格中,导致TiO2晶格畸变,带隙变窄.掺杂的硼和硫还提高了TiO2的表面酸度和对可见光的吸收.     

方形锐钛矿TiO2纳米晶的合成及表征

在不添加任何模板剂或形状控制剂的条件下,以TiCl₄为前体,经氨水沉淀、乙醇洗涤和超临界干燥(AS制备法)选择性地合成了方形锐钛矿TiO₂纳米单晶.热稳定性研究结果表明,当焙烧温度不超过650℃时,方形锐钛矿TiO₂纳米晶的表面积、孔容、晶粒/颗粒尺寸基本保持不变.XRD和拉曼光谱分析表明,方形锐钛矿TiO₂纳米晶在800℃下焙烧后仍能保持晶相不变,表现出很强的抗晶相转变能力.但在1000℃焙烧后,样品可以完全转变成金红石相TiO₂.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.