Synthesis and Photophysical Properties of 3,6-Diphenyl-9-hexyl-9H-carbazole Derivatives Bearing Electron Withdrawing Groups

3,6-Diphenyl-9-hexyl-9H-carbazole derivatives bearing electron withdrawing groups, such as the formyl or the nitro-group in 4-positions of the phenyl substituents, were prepared and characterized. Their photophysical properties were evaluated and compared with those of the unsubstituted counterpart 3,6-diphenyl-9-hexyl-9H-carbazole. The electron withdrawing groups bearing compounds exhibited considerable red shifts of the absorption and the emission maxima. While 3,6-di(4-nitrophenyl)-9-hexyl-9H-carbazole emitted in the orange region of the visible spectrum with its emission maximum peaking at 585 nm, 3,6-di(4-formylphenyl)-9-hexyl-9H-carbazole gave a pure blue emission with a luminescence quantum yield of 95% peaking at 450 nm. Observed features were explained using quantum mechanical calculations and organic light emitting diodes using the formylphenyl substituted compound as emissive layer were built demonstrating the practical applicability of this class of compounds.     

Synthesis and photochemical properties of 3,6-di-<Emphasis Type="Italic">tert</Emphasis>-butyl-9<Emphasis Type="Italic">H</Emphasis>-carbazole derivatives

Method of synthesis has been developed for a series of 3,6-di-tert-butyl-9H-carbazole derivatives and their photochemical properties have been investigated. The dependence of the Steglich esterification reaction on the nature of the catalyst was studied. The synthesized compounds show fluorescent emission in the range 400–600 nm with a high quantum yield.     

Synthesis and Properties of Glass-Forming Hydrazones II [1]. Hydrazones Containing Bicarbazolyl Units

Summary.  A series of new glass-forming hydrazones containing bicarbazolyl units were synthesized starting from 9-(2-(9H-carbazol-9-yl)-cyclobutyl)-9H-carbazole and 9-(6-(9H-carbazol-9-yl)-hexyl)-9H-carbazole, and their thermal properties were studied. The correlation between their inclination to form glasses and their chemical structures are discussed. The results of a preliminary investigation of the photoelectric properties of amorphous films of the title compounds are briefly reported. The highest hole drift mobility was observed for 9-(2-(9H-carbazol-9-yl)-cyclobutyl)-9H-carbazole-3-carbaldehyde N,N-diphenylhydrazone; at high electric fields, it approaches 1 · 10⁻³ cm²/Vs. Received September 17, 2001. Accepted (revised) October 16, 2001     

Influence of Electronic Environment on the Radiative Efficiency of 9-Phenyl-9H-carbazole-Based ortho-Carboranyl Luminophores

The photophysical properties of closo-ortho-carboranyl-based donor–acceptor dyads are known to be affected by the electronic environment of the carborane cage but the influence of the electronic environment of the donor moiety remains unclear. Herein, four 9-phenyl-9H-carbazole-based closo-ortho-carboranyl compounds (1F, 2P, 3M, and 4T), in which an o-carborane cage was appended at the C3-position of a 9-phenyl-9H-carbazole moiety bearing various functional groups, were synthesized and fully characterized using multinuclear nuclear magnetic resonance spectroscopy and elemental analysis. Furthermore, the solid-state molecular structures of 1F and 4T were determined by X-ray diffraction crystallography. For all the compounds, the lowest-energy absorption band exhibited a tail extending to 350 nm, attributable to the spin-allowed π–π* transition of the 9-phenyl-9H-carbazole moiety and weak intramolecular charge transfer (ICT) between the o-carborane and the carbazole group. These compounds showed intense yellowish emission (λ_em = ~540 nm) in rigid states (in tetrahydrofuran (THF) at 77 K and in films), whereas considerably weak emission was observed in THF at 298 K. Theoretical calculations on the first excited states (S₁) of the compounds suggested that the strong emission bands can be assigned to the ICT transition involving the o-carborane. Furthermore, photoluminescence experiments in THF‒water mixtures demonstrated that aggregation-induced emission was responsible for the emission in rigid states. Intriguingly, the quantum yields and radiative decay constants in the film state were gradually enhanced with the increasing electron-donating ability of the substituent on the 9-phenyl group (‒F for 1F < ‒H for 2P < ‒CH₃ for 3M < ‒C(CH₃)₃ for 4T). These features indicate that the ICT-based radiative decay process in rigid states is affected by the electronic environment of the 9-phenyl-9H-carbazole group. Consequently, the efficient ICT-based radiative decay of o-carboranyl compounds can be achieved by appending the o-carborane cage with electron-rich aromatic systems.     

Cationic ring-opening polymerization of carbazolyl-containing epoxy monomers by triphenyl carbenium salts as thermal- and photolatent initiators

Abstract  

Photoinitiated cationic polymerizations of various epoxy monomers bearing a carbazole moiety, 9-[3-(allyloxy)-2-(oxiran-2-ylmethoxy)propyl]-9H-carbazole, 9-[3-methoxy-2-(oxiran-2-ylmethoxy)propyl]-9H-carbazole, 9-[2-(oxiran-2-ylmethoxy)ethyl]-9H-carbazole, as well as a composition of 3,6-dibromo-9-(oxiran-2-ylmethyl)-9H-carbazole with 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate were investigated in bulk using triphenyl carbenium salts having anions such as BF₄ ⁻, SnCl₅ ⁻, and SbCl₆ ⁻. Dark polymerizations of the carbazolyl monomers in the presence of the initiators are studied. These photoinduced polymerization reactions give oligomers of degree of polymerization 4-22. The effect of the anion of the photoinitiator and polymerization time on the polymerization reaction is discussed.     

Synthesis and Properties of Glass-Forming Hydrazones II [1]. Hydrazones Containing Bicarbazolyl Units

 A series of new glass-forming hydrazones containing bicarbazolyl units were synthesized starting from 9-(2-(9H-carbazol-9-yl)-cyclobutyl)-9H-carbazole and 9-(6-(9H-carbazol-9-yl)-hexyl)-9H-carbazole, and their thermal properties were studied. The correlation between their inclination to form glasses and their chemical structures are discussed. The results of a preliminary investigation of the photoelectric properties of amorphous films of the title compounds are briefly reported. The highest hole drift mobility was observed for 9-(2-(9H-carbazol-9-yl)-cyclobutyl)-9H-carbazole-3-carbaldehyde N,N-diphenylhydrazone; at high electric fields, it approaches 1 · 10⁻³ cm²/Vs.     

Cationic ring-opening polymerization of carbazolyl-containing epoxy monomers by triphenyl carbenium salts as thermal- and photolatent initiators

Abstract  Photoinitiated cationic polymerizations of various epoxy monomers bearing a carbazole moiety, 9-[3-(allyloxy)-2-(oxiran-2-ylmethoxy)propyl]-9H-carbazole, 9-[3-methoxy-2-(oxiran-2-ylmethoxy)propyl]-9H-carbazole, 9-[2-(oxiran-2-ylmethoxy)ethyl]-9H-carbazole, as well as a composition of 3,6-dibromo-9-(oxiran-2-ylmethyl)-9H-carbazole with 3,4-epoxycyclohexylmethyl 3,4-epoxycyclohexane carboxylate were investigated in bulk using triphenyl carbenium salts having anions such as BF₄ ⁻, SnCl₅ ⁻, and SbCl₆ ⁻. Dark polymerizations of the carbazolyl monomers in the presence of the initiators are studied. These photoinduced polymerization reactions give oligomers of degree of polymerization 4-22. The effect of the anion of the photoinitiator and polymerization time on the polymerization reaction is discussed. Graphical abstract        

V形咔唑衍生物的合成及荧光性质

以N-烷基咔唑作为电子给体和共轭桥中心, 二米基硼作为端基电子受体, 合成了两个V形A-π-D-π-A型新化合物: 3,6-二{[(E)-2-(5-二米基硼)噻吩]乙烯基}-N-丁基-咔唑 {N-butyl-3,6-bis{(E)-2-[5-(dimesitylboryl)thiophen-2-yl]-vinyl}-carbazole, BBTC}和3,6-二[(E)-(4-二米基硼)苯乙烯基]-N-己基-咔唑, {N-hexyl-3,6-bis[(E)-4-(dimesitylboryl)-styryl]-carbazole, BBSC}. 这两个化合物在蓝绿光波段都有较强的荧光发射. 光谱数据表明, 扩大共轭体系并在端基引入含硼基团导致吸收谱和发射谱显著红移, 并增大分子内电荷转移.     

Aggregation-Enhanced Emission and Thermally Activated Delayed Fluorescence of Derivatives of 9-Phenyl-9H-Carbazole: Effects of Methoxy and tert-Butyl Substituents

Derivatives of 9-phenyl-9H-carbazole were synthesized as efficient emitters exhibiting both thermally activated delayed fluorescence and aggregation-induced emission enhancement. Effects of methoxy and tert-butyl substituents at the different positions of carbazolyl groups on the properties of the emitters were studied. Depending on the substitutions, photoluminescence quantum yields (PLQY) of non-doped solid films of the compounds ranged from 17 % to 53 % which were much higher than those observed for the solutions in low-polarity solvent toluene. Compounds substituted at C-3 and C-6 positions of carbazole moiety by methoxy- and tert-butyl- groups showed the highest solid-state PLQY. Ionization potentials of the studied derivatives in solid-state were found to be in the short range of 5.75–5.89 eV. Well-balanced hole and electron mobilities were detected for tert-butyl-substituted compound. They exceeded 10⁻⁴ cm² (V×s)⁻¹ at electric fields higher than 3×10⁵ V cm⁻¹. Two compounds with the highest solid-state PLQYs showed higher efficiencies in non-doped organic light-emitting diodes than in the doped devices. Maximum external quantum efficiency of 7.2 % and brightness of 15000 cd m⁻² were observed for the best device.     

Postmodification of poly(9‐alkyl‐9H‐carbazole‐2,7‐diyl)s as a route to new main‐chain‐functionalized carbazole polymers

The postmodification of poly[9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P1 ) upon its reaction with N‐bromosuccinimide affords exclusive and full bromination of the 3,6‐positions of the carbazole repeat units to yield poly[3,6‐dibromo‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P2 ). Brominated polymer P2 can be used as a precursor for further functionalization at the 3,6‐positions with the desired functional group to afford other useful polymers. Polymer P2 has hence been reacted with copper(I) cyanide to afford poly[3,6‐dicyano‐9‐(2‐hexyldecyl)‐9H‐carbazole‐2,7‐diyl] ( P3 ). Full substitution of the bromide groups with nitrile‐functional groups has been achieved. The preparation and structural characterization of polymers P2 and P3 are presented together with studies on their electronic conjugation and photoluminescence properties. Cyclic voltammetry studies on polymer P3 indicate that the new polymer is easier to reduce (n‐dope) but more difficult to oxidize than its unsubstituted counterpart ( P1 ) as a result of the introduction of the electron‐withdrawing nitrile‐functional groups at the 3,6‐positions on the carbazole repeat units on the polymer chains. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3336–3342, 2006     

Reaction of 3,6-di(<Emphasis Type="Italic">tert</Emphasis>-butyl)-1,2-benzoquinone with terminal alkylacetylenes in the presence of phosphorus trichloride

A reaction of 3,6-di(tert-butyl)-1,2-benzoquinone with alkynes in the presence of phosphorus trichloride leads to a predominant formation of 4-alkyl- and 4-haloalkyl-5,8-di(tert-butyl)-2,6-dichloro-2 H- benzo[e][1,2]oxaphosphinine 2-oxide. An ipso-substitution of the tert-butyl group at ortho-position to the oxygen atom of the benzophosphinine system with the formation of 4-alkyl-5- tert-butyl-2,8-dichloro-2 H-benzo[e][1,2]oxaphosphinine 2-oxide was the minor route of the reaction with alkylacetylenes. Molecular structures of 4-butyl-5,8-di( tert-butyl)-2,6-dichloro-2 H- benzo[e][1,2]oxaphosphinine 2-oxide and 5,8-di( tert-butyl)-2,6-dichloro-4-hexyl-2 H-benzo[e][1,2]oxaphosphinine 2-oxide were studied by X-ray analysis.     

Synthesis and Electrochemistry of Soluble Phthalocyanine Complexes Containing Four Peripheral Dihexyl and Dihexylhexylmalonate Residues

Summary.  Tetrasubstituted phthalocyanines bearing four dihexylmalonate or dihexylhexylmalonate residues on the periphery (M[Pc(CH(COOC₆H₁₃)₂)₄] or M[Pc(C(COOC₆H₁₃)₂ C₆H₁₃)₄]; M = Pd(II), Cu(II), Co(II)) were synthesized from the anhydrous metal salts and the corresponding phthalonitriles. The complexes were only slightly soluble in polar solvents such as methanol and ethanol, but more soluble in less polar solvents such as benzene, toluene, and even hexane. The spectroscopic properties of the complexes were affected strongly by the electron withdrawing malonate units. Cyclic voltammetry on a platinum electrode in dichloromethane showed ligand-based one-electron transfers for Cu and Pd compounds, whereas the Co complex displayed metal-based or/and ligand-based one-electron transfers depending on the supporting electrolyte anion. The structures were confirmed by elemental analysis, ¹H NMR, ¹³C NMR, IR, mass (EI and FAB), and UV/Vis spectroscopy. Received November 24, 2000. Accepted (revised) January 2, 2001     

A 2D Metal‐Organic Framework Based on 9‐(Pyridin‐4‐yl)‐9H‐carbazole‐3,6‐dicarboxylic Acid: Synthesis,Structure and Properties

A metal‐organic framework (MOF ) formulated as [Cd₂(μ₃‐L)₂(DMF )₄]•H₂O ( CdL ) [H₂L =9‐(pyridin‐4‐yl)‐ 9H ‐carbazole‐3,6‐dicarboxylic acid, DMF =N ,N ‐dimethylformamide] was synthesized under solvothermal condition. Crystal structural analysis reveals that CdL features the layered 2D framework with L^{2 −} ligands as 3‐connected nodes. The compound CdL emits blue‐violet light with the narrow emission peak and the emission maximum at 414 nm upon excitation at the maximum excitation wavelength of 340 nm. The compound CdL has a similar emission spectrum curve to the free H₂L ligand that indicates the emission of compound CdL should be originated from the coordinated L^{2 −} ligands.     

Palladium-Catalysed Amination of Hindered Aryl Halides with 9H-Carbazole

Palladium-catalysed Buchwald–Hartwig amination of ortho-substituted hindered aryl bromides or chlorides with 9H-carbazole has been investigated. In the amination of 1-bromo- or chloronaphthalene with 9H-carbazole, the combined use of Pd₂(dba)₃ as a Pd precursor, Buchwald ligands with two tert-butyl groups and LiOtBu or lithium hexamethyldisilazide as a base led to satisfactory yields. N,N’-Bis[2,6-bis(diphenylmethyl)-4-methoxyphenyl]imidazol-2-ylidene (IPr*^OMe), which is a bulky N-heterocyclic carbene ligand, showed similar activity as Buchwald ligands with two tert-butyl groups. In contrast, only IPr*^OMe provided satisfactory yields in the amination of 2-bromo-1,1′-biphenyl with 9H-carbazole. The amination of 2-bromo- or chlorotoluene and 1-(2-bromo- or chlorophenyl)naphthalene with 9H-carbazole proceeded smoothly when the IPr*^OMe ligand was used.     

Methoxyl-induced fluorescence quenching in N,N′-bridged 9H-dipyrrinones and an X-ray crystal structure

Strongly fluorescent dipyrrinones can be prepared by bridging the pyrrole and lactam nitrogens with a carbonyl group, from reaction with N,N′-carbonyldiimidazole in the presence of a strong, non-nucleophilic base. The yellow, N,N′-carbonyl-bridged dipyrrinones typically have fluorescent quantum yields (φ_F) approaching 1.0. Thus, in chloroform, N,N′-bridged 9H-dipyrrinones with β-alkyl substituents: 2,3-diethyl-7,8-dimethyl has φ_F = 0.90 (λ_em = 465 nm) and 2,3-dimethyl-7,8-dimethoxy has φ_F = 0.84 (λ_em = 482 nm). In contrast, 2,3-dimethoxy-7,8-dimethyl and 2,3,7,8-tetramethoxy show red-shifted λ_em but with strongly reduced φ_F: φ_F = 0.10 (λ_em = 511 nm) and 0.08 (λ_em = 511 nm), respectively. Methoxy substituents on the lactam, but not the pyrrole ring act to quench the fluorescence and shift the emission and excitation wavelengths bathochromically. The first X-ray crystal structure of an N,N′-carbonyl-bridged dipyrrinone was obtained from 7,8-dimethoxy-2,3-dimethyl-10H-dipyrrin-1-one. Correspondence: David A. Lightner, Department of Chemistry, University of Nevada, Reno, Nevada 89557-0020, USA.     

Facile Synthesis of Some 3-(Benzimidazol-2-yl)- and 3,6-Di(Benzimidazol-2-yl)-9-ethyl-9H-carbazoles

A simple and efficient synthesis of novel 3-(benzimidazol-2-yl)- and 3,6-di(benzimidazol-2-yl)-9-ethyl-9H-carbazoles is described. The synthetic approach for the preparation of 2-substituted benzimidazoles 4–8 and bis-benzimidazoles 9–12 was achieved by the condensation of carbazole-3-carbaldehyde 2 and carbazole-3,6-dicarbaldehyde 3 with o-phenyldiamines in dimethylformamide or dimethylsulfoxide in moderate to excellent yield. The identities of synthesized compounds were confirmed using ¹H NMR, ¹³C NMR, infrared (IR), and high-resolution mass spectrometry (HRMS).     

新型基于3,6-咔唑与噻吩衍生物的红光聚合物的合成与性能研究

用Suzuki偶合反应制备了一系列N-(2-乙基己基)-3,6-咔唑(Cz)与4,7-二(4-己基噻吩)-2,1,3-苯并噻二唑(DHTBT)的共聚物, 研究该类聚合物的电化学、光学和电致发光性能. 在薄膜状态下, 即使DHTBT含量为1%的聚合物也发生了从Cz链段到DHTBT单元的有效的能量转移. 光致发光光谱随着DHTBT含量的增加, 从645 nm红移至690 nm. PCzDHTBT1获得了71%的薄膜光致发光效率. 以该类聚合物为发光层的器件的EL光谱也随着DHTBT含量的增加从635 nm红移至680 nm. 由PCzDHTBT15制作的结构为ITO/PEDOT:PSS/polymer/Ba/Al的器件得到了0.61%的外量子效率.     

Arylamino‐functionalized fluorene‐ and carbazole‐based copolymers: Color‐tuning their CdTe nanocrystal composites from red to white

Four alternating arylamino‐functionalized copolymers were synthesized in a Suzuki copolymerization applying 4, 4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)dianiline, 4,4′‐(2,7‐dibromo‐9H‐fluorene‐9,9‐diyl)bis(N,N‐diphenylaniline), 4‐(3,6‐dibromo‐9H‐ carbazol‐9‐yl)aniline and 4‐(3,6‐dibromo‐9H‐carbazol‐9‐yl)‐N,N‐diphenylaniline in combination with 2,2′‐(9,9‐dioctyl‐9H‐fluorene‐2,7‐diyl)bis(1,3,2‐dioxaborinane). The resulting novel alternating copolymers were fully characterized. The copolymers revealed blue light emission and wide optical bandgaps of at least 2.93 eV for the fluorene‐based and 3.07 eV for the carbazole‐based polymers. The amino‐functions allow to tie semiconducting CdTe nanocrystals (NCs) and to synthesize a series of composites with CdTe NCs. Moreover, tuning the emission color over a wide range by tying these CdTe NCs results in a facile preparation of organic–inorganic semiconductor composites with emission colors “à la carte.” © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Determination of biogenic amines by RPHPLC with fluorescent detection after derivatization with 2-(9-carbazole)ethyl chloroformate (CEOC)

Summary The use of 2-(9-carbazole)ethyl chloroformate (CEOC) for pre-column derivatization of biogenic amines (BA) has been tested for the first time. The reagent reacts completely with BA within 3 min at ambient temperature in acetonitrile solution to form stable derivatives that are readily analyzed by reversed-phase HPLC. Study of the derivatization conditions revealed derivatization yields to be excellent in borate buffer over the pH range 9.0–10.0. Maximum yields were obtained by use of a three- to fourfold molar excess of reagent. The reaction is extremely tolerant of common buffer salts, no decrease in reaction yield is discernible in well-buffered samples. The emission maximum for the CEOC-derivatives is 360 nm (λ _ex = 293 nm). All the derivatives fluoresced strongly and direct injection of the reaction mixture was possible, with no significant disturbance from the major fluorescent reagent degradation by-products, 2-(9-carbazole)ethanol (CEOC-OH) and bis-(2-(9-carbazole)ethyl) carbonate (CEOC)₂. Separation of the derivatized BA by high-performance liquid chromatography with gradient elution was tested on a Hypersil BDS C18 column. Excellent response linearity was observed over the concentration range from 0.25 to 94.6 μmol L⁻¹ for the labeled BA. Detection limits were 117–840 fmol at a signal-to-noise ratio of 3∶1. Analysis of BA in a shrimp sauce extract was conducted to demonstrate the applicability of the technique to real sample matrixes; results were satisfactory.     

NOVEL RED LIGHT-EMITTING POLYMERS BASED ON 2,7-CARBAZOLE AND THIOPHENE DERIVATIVES

A series of conjugated copolymers derived from 9-ethylhexyl-2,7-carbazole(Cz)and 4,7-di(4-hexylthien-2-yl)- 2,1,3-benzothiadiazole(DHTBT)was synthesized by Suzuki polycondensation.The photo-and electro-luminescent properties of these polymers were investigated.Efficient energy transfer from the Cz segment to the DHTBT unit occurs even if the DHTBT content as low as 1 mol%.PL emission was red-shifted significantly from 645 nm to 700 nm with the increase in DHTBT content by 1-50 mol%.PL efficiencies decrea...