Single-Ionic Conductivityin Poly(Sodium 2-Methacryloyl 3-[Ω-Methoxyl Oligo(Oxyethylene)]Propylsulfonate)

Abstract

Sodium 2-methacryloyl 3-[ω-methoxyl oligo(oxyethylene)] propylsulfonate was synthesized, from which homopolymer-based polyelectrolyte was prepared. The polyelectrolytes thus obtained show single Na⁺ionic conductivity at ambient temperature, neither adding plasticizer nor hybridizing small molecular salt. The conductivity depends considerably on the length of oligo(oxyethylene) side-chain. Optimally, the highest conductivity of 6.0 × 10^?6 S/cm at 25°C is obtained when the number of (CH₂CH₂O) repeating units equals 16. Results indicate that the conductivity data follow WLF and VTF equations. The WLF parameters are found to be comparable with “universal” values, and analysis of the configuration entropy model suggests that the conduction of Na⁺ ions is carried out by an association mechanism.     

Water-Soluble imide-amide copolymers. I. Preparation and characterization of poly [acrylamide-co-sodium N-(4-sulfophenyl) maleimide]

Sodium N-(4-sulfophenyl) maleimide (SPMI) and its saturated succinimide counterpart were first prepared according to established methods. Hydrolysis experiments on these monomers monitored by ¹H-NMR showed that although SPMI monomer was about 15% hydrolyzed in D₂O at 23°C in 24 h. Sodium N-(4-sulfophenyl) succinimide, which is similar in structure to the imide units in the copolymers, was only 1% hydrolyzed after 18 days at 23°C and 29% hydrolyzed after 18 days at 60°C. This indicated that the saturated imide rings in the copolymer might be sufficiently stable to hydrolysis for the copolymers to be useful. However, hydrolysis at high pH demonstrated that the imide rings would be rapidly saponified under alkaline conditions, destroying the structural rigidity that the intact rings might have provided in the copolymer chains. Sodium N-(4-sulfophenyl) maleimide (SPMI) was copolymerized with acrylamide in water at 30°C without cleavage of the imide ring. Water-soluble poly [acrylamide-co-sodium-N-(4-sulfophenyl) maleimide] (PAMSM) samples containing from 7.4 to 64 mol % imide were prepared. Photoacoustic FTIR and ¹³C-NMR spectra were used to confirm the structure of the copolymers obtained. Elemental analysis was used to determine the imide content of the copolymers, and from this composition data reactivity ratios were calculated for the two component monomers.     

Specific ionic conduction in poly[oligo (oxyethylene glycol) methacrylate] (PMEO)–Li salt complexes under high‐pressure CO2

We measured the ionic conductivity of amorphous poly[oligo (oxyethylene glycol) methacrylate] (PMEO)–lithium salt complexes under a CO₂ pressure varying from 0.1 to 20 MPa. The pressure dependence of the conductivity was positive, and the conductivity was higher than that under an inert gas such as N₂. The ion‐conductive behavior has been modeled using both the Vogel–Tammann–Fulcher (VTF) equation and activation volume theory. The calculated parameters of the VTF equation show that CO₂ that had permeated into the PMEO matrix acts as solvent molecules to dissolve ions and lower the glass transition temperature at high pressures. The ionic conduction in PMEO complexes under high‐pressure CO₂ was scarcely related to the VTF parameters and activation volume equations. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3151–3158, 2005     

SYNTHESIS AND CHARACTERIZATION OF POLYSILOXANE CONTAINING OLIGO(OXYETHYLENE)SULFATE SALT

Solvent-free polymeric alkali-metal ion conductors, consisting of a comb-like polysiloxane with oligo(oxy-ethylene) side chains and pendant sulfate groups were synthesized by the hydrosilylation of allyl oligo(oxyethylene) sulfatesalt and allyl methoxy oligo(oxyethylene) with poly(methylhydrosiloxane). The factors influncing the ionic conductivity ofthe resulting polymer such as the electrolyte content and the nature of the alkali-metal were investigated. The temperaturedependence of conductivity was determined, and the ionic conductivity of the polymer follows the Vogel-Tammann-Fulcher(VTF) equation.     

低聚醚磺酸锂／梳形聚醚复合物的单离子导电性

A complex ionic conductor was prepared by solution complexation of lithium methoxy oligo (oxyethylene) sulfonate (SOL₈, where & is the repeating unit of oxyethylene) with comblike copolyether poly [methoxy oligo (oxyethylene)methacrylate-co-acrylamide] [P(MEO₁₆-AM)]. The composition dependences of glass transition temperature,crystallinity as well as conducti-vity of the complex were investigated. DC polarization showed that the complex shows a stable polarization characteristic. Polarization reversing method confirmed that the complex has a cati-onic transference number of 0.99.     

Synthesis and properties of poly(thiourethane)s having soft oligoether segments

Polyaddition of bis(five‐membered cyclic dithiocarbonate), 2,2‐bis[4‐(1,3‐thioxolane‐2‐one‐4‐yl‐methoxy)phenyl]propane ( 1 ), with diamines having soft oligoether segments and property of the obtained poly(thiourethane)s were examined. Treatment of 1 with equivalent diamines in tetrahydrofuran at room temperature gave poly(thiourethane)s having a mercapto group in each unit, which were further treated with acetic anhydride and triethylamine to give the corresponding S‐acetylated poly(thiourethane)s in high yield. Exposing the mercapto group containing poly(thiourethane)s to benzoyl chloride and triethylamine provided the corresponding S‐benzoylated poly(thiourethane)s effectively. Thermal properties of the obtained polymers were evaluated by thermogravimetric analysis and differential scanning calorimetry. The obtained polymers showed 10 wt % loss temperature (T_d10) in the range from 230 to 274 °C, which was relatively high when compared with the T_d10 of an analogous polymer prepared from 1 and 1,6‐hexamethylenediamine. The polymers obtained here exhibited glass transition temperature (T_g) in the range from ?16 °C to 40 °C, which was much lower than the analogous polymer described above, probably due to the soft oligoether segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1076–1081     

Electroactive block copolymers

Synthesis, characterization and properties of microphase separated mixed (ionic and electronic) conducting or MIEC block copolymers are reported. Poly{[ω-methoxyocta(oxyethylene) methacrylate]-block-(4-vinylpyridine)}, abbreviated as P[MG8–4VP], and poly{(3-methylthiophene)-block-[(ω-methoxyocta(oxyethylene) methacrylate]}, abbreviated as P[3MT-MG8], have been synthesized. Differential scanning calorimetry (DSC) studies indicate that the polymers form a microphase separated structure. P[3MT-MG8] can be doped with I₂ and LiClO₄ to generate electronic and ionic conducting microdomains, respectively. For the P[3MT-MG8] series, bulk electronic conductivity as high as 1×10⁻³ S cm⁻¹ and bulk ionic conductivity as high as 6.6×10⁻⁷ S cm⁻¹ is observed at 30°C. This work represents a new concept in the area of electroactive polymers and should impact the microelectrochemical device industry.     

Radical and anionic homopolymerization of maleimide and N-n-butylmaleimide

The rate of homopolymerization of maleimide has been measured in dimethylformamide solution at 60°C. in the presence of azobisisobutyronitrile; it has been compared to that of N-n-butylmaleimide. The overall rates of polymerization are equal to R_p = k[M]^1.1–1.2 [In]^0.8 for maleimide, and R_p = k'[M] [In]^0.5 for the N-substituted imide. The difference of behavior has been interpreted on the basis of an intramolecular tautomery of the terminal group of the maleimide growing chain and the formation of a resonance-stabilized succinimidyl radical. The relative ease of polymerization of these monomers and of maleic anhydride has been discussed. In the presence of sodium tert-butoxide at 20°C. in dimethylformamide solutions, maleimide polymerizes with hydrogen isomerization. The percentage of N-substituted isomerized units was evaluated at 70–75% by measurement of the rate of hydrolysis in 0.005N sodium hydroxide and comparison with succinimide and N-butylsuccinimide. N-n-butylmaleimide undergoes ring opening together with anionic polymerization in the presence of sodium tert-butoxide at 20°C. and butyllithium at -40°C. Unlike the radical-initiated polymerization, it was impossible to obtain anionic copolymers of maleimide and N-butylmaleimide with acrylonitrile and methyl methacrylate.     

Alkali metal ion conductors based on sulfonated poly(p-phenylene terephthalamide)

To obtain thermally stable and mechanically strong sodium and lithium conducting polymers, we prepared Na⁺ and Li⁺ poly(phenylene terephthalamide sulfonate salts) (MW ～ 5500). We also synthesized oligo(ethylene oxide) (3, 5, or 7 units of ethylene oxide) substituted ethylene carbonate and poly[oxymethylene-oligo(oxyethylene)]. These are high boiling point liquids with high dielectric constants as well as metal chelating properties. Polyelectrolyte systems were prepared by mixing Na⁺ or Li⁺ poly(phenylene terephthalamide sulfonate) salts with various amounts of modified ethylene carbonate and/or poly[oxymethylene-oligo(oxyethylene)]. Films (0.1–0.5 mm thick) obtained from the blends were found to have considerable mechanical strength; forming free standing films. The ionic conductivities of the Na⁺ and Li⁺ polyelectrolyte systems were 10^?6?10^?5 S/cm at 25°C. Thermal properties of these blend systems were investigated in detail. © 1994 John Wiley & Sons, Inc.     

Kinetics of the mercury(II)‐catalyzed substitution of coordinated cyanide ion in hexacyanoruthenate(II) by nitroso‐R‐salt

The kinetics and mechanism of Hg²⁺‐catalyzed substitution of cyanide ion in an octahedral hexacyanoruthenate(II) complex by nitroso‐R‐salt have been studied spectrophotometrically at 525 nm (λ_max of the purple‐red–colored complex). The reaction conditions were: temperature = 45.0 ± 0.1°C, pH = 7.00 ± 0.02, and ionic strength (I) = 0.1 M (KCl). The reaction exhibited a first‐order dependence on [nitroso‐R‐salt] and a variable order dependence on [Ru(CN)₆^4?]. The initial rates were obtained from slopes of absorbance versus time plots. The rate of reaction was found to initially increase linearly with [nitroso‐R‐salt], and finally decrease at [nitroso‐R‐salt] = 3.50 × 10^?4 M. The effects of variation of pH, ionic strength, concentration of catalyst, and temperature on the reaction rate were also studied and explained in detail. The values of k₂ and activation parameters for catalyzed reaction were found to be 7.68 × 10^?4 s^?1 and E_a = 49.56 ± 0.091 kJ mol^?1, ΔH^≠ = 46.91 ± 0.036 kJ mol^?1, ΔS^≠ = ?234.13 ± 1.12 J K^?1 mol^?1, respectively. These activation parameters along with other experimental observations supported the solvent assisted interchange dissociative (I_d) mechanism for the reaction. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 41: 215–226, 2009     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.     

Hierarchically organized micellization of thermoresponsive rod‐coil copolymers based on poly[oligo(ethylene glycol) methacrylate] and poly(ε‐caprolactone)

A series of amphiphilic triblock copolymers, poly[oligo(ethylene glycol) methacrylate]_x‐block‐poly(ε‐caprolactone)‐block‐poly[oligo(ethylene glycol) methacrylate]_x, POEGMA_Co(x), were synthesized. Formation of hydrophobic domains as cores of the micelles was studied by fluorescence spectroscopy. The critical micelle concentrations in aqueous solution were found to be in the range of circa 10^?6 M. A novel methodology by modulated temperature differential scanning calorimetry was developed to determine critical micelle temperature. A significant concentration dependence of cmt was found. Dynamic light scattering measurements showed a bidispersed size distribution. The micelles showed reversible dispersion/aggregation in response to temperature cycles with lower critical solution temperature between 75 and 85 °C. The interplay of the two hydrophobic and one thermoresponsive macromolecular chains offers the chance to more complex morphologies. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Anionic Conduction in Blends of Poly(Pyridinium Ethyl Methacrylate Perchloride) and Poly[Oligo(Oxyethylene) Methacrylate-Co-Acrylamide]

Abstract

Blends of poly(pyridinium ethyl methacrylate perchloride) and poly[oligo(oxyethylene) methacrylate-co-acrylamide] were prepared, and the ionic conductivity and mobility of the blends were investigated. Results indicate that both the transference of perchlorate anion and the dissociation of the polymeric salt in the comblike polyether obey the thermoactivation mechanism, and that the perchlorate anion in the blends is free.     

CATIONIC CONDUCTIVITY FOR THE CROSSLINKED P [OLIGO (OXYETHYLENE) METHACRYLATE-COoMETHACRYLOYL ALKYLSULFONIC ACID LITHIUM]

Crosslinked copolymers with single Li~+-ionic conductivity were prepared from oligo (oxyethylene) methacrylate (MEO_n), methacryloyl alkylsulfonic acid lithium (SAMLi), and oligo (oxyethylene) dimethacrylate (DMEO_n). Li~+-ionic conductivity of the copolymer is improved by crosslinking and presented as a function of polymerization degree (n) in MEO_n, comonomeric salt concentration (O/Li), and crosslinking degree. The crosslinked copolymer P (0.7 MEO_(14)-0.3DMEO_(14)-SHMLi) without other small molecular additives exhibits an optimum Li~+-ionic conductivity of 1.2×10~(-6) S/cm at 25℃. Dc polarization test in the cell composed of Li/copolymer/Li shows a constant dc ionic conductivity which closes gradually to the ac one with decreasing dc polarization potential.     

Synthesis of thermally-induced phase separating polymer with well-defined polymer structure by living cationic polymerization. I. Synthesis of poly(vinyl ether)s with oxyethylene units in the pendant and its phase separation behavior in aqueous solution

Living cationic polymerization of alkoxyethyl vinyl ether [CH₂?CHOCH₂CH₂OR; R: CH₃ (MOVE), C₂H₅ (EOVE)] and related vinyl ethers with oxyethylene units in the pendant was achieved by 1-(isobutoxy)ethyl acetate ( 1 )/Et_1.5AlCl_1.5 initiating system in the presence of an added base (ethyl acetate or THF) in toluene at 0°C. The polymers had a very narrow molecular weight distribution (M?_w/M?_n = 1.1–1.2) and the M?_n proportionally increased with the progress of the polymerization reaction. On the other hand, the polymerization by 1 /EtAlCl₂ initiating system in the presence of ethyl acetate, which produces living polymer of isobutyl vinyl ether, yielded the nonliving polymer. When an aqueous solution of the polymers thus obtained was heated, the phase separation phenomenon was clearly observed in each polymer at a definite critical temperature (T_ps). For example, T_ps was 70°C for poly(MOVE), and 20°C for poly(EOVE) (1 wt % aqueous solution, M?_n ～ 2 × 10⁴). The phase separation for each case was quite sensitive (ΔT_ps = 0.3–0.5°C) and reversible on heating and cooling. The T_ps or ΔT_ps was clearly dependent not only on the structure of polymer side chains (oxyethylene chain length and ω-alkyl group), but also on the molecular weight (M?_n = 5 × 10³-7 × 10⁴) and its distribution. © 1992 John Wiley & Sons, Inc.     

Synthesis and polymerization of N-[4-N′- (α-methylbenzyl)aminocarbonylphenyl]maleimide

A novel type of optically active N-[4-N′-(α-methylbenzyl)aminocarbonylphenyl]maleimide [(R)-MBCP] was synthesized from maleic anhydride, p-aminobenzoic acid, and (R)-methylbenzylamine. Radical homopolymerization of (R)-MBCP was performed in tetrahydrofuran (THF) at 50 and 70°C for 24 h to give optically active polymers having [α]²⁵_D = -141° and -129°, respectively. Anionic polymerization of (R)-MBCP with n-butyllithium in THF and N,N-dimethylformamide gave an optically active polymer having ?78 to ?81° of [α]²⁵_D. Radical copolymerizations of (R)-MBCP (M₁) were performed with styrene (ST, M₂) and methyl methacrylate (MMA, M₂) in THF at 50°C. The monomer reactivity ratios (r₁, r₂) and the Alfrey-Price Q-e values were determined as follows: r₁ = 0.009, r₂ = 0.091, Q₁ = 1.30, e₁ = 1.87 in the (R)-MBCP-ST; r₁ = 0.27, r₂ = 1.21, Q₁ = 0.93, e₁ = 1.46 in the (R)-MBCP-MMA system. Chiroptical properties of the polymers were also investigated. © 1992 John Wiley & Sons, Inc.     

Single-Ion Conduction and Electrochemical Characteristics of Poly (Oxyethylene)/ Lithium Methoxy Oligo(Oxyethylene) Sulfate Blend

Abstract

The ion conduction of a blend of poly(oxyethylene) (PEO) and lithium methoxy oligo(oxyethylene) sulfate (SAL₈) and its electrochemical characteristics were studied. The maximum ambient conductivity of the blend reaches 1.2 × 10^?6 S/cm. The blend exhibits single-ion conduction, excellent mechanical performance, and electrochemical stability. A battery of Li/PEO + SAL₈/Li_1+xV₃O₈ has a constant discharge capacity at different discharge current densities up to a certain voltage, while the discharge capacity of Li/P (MEO_16-AM) + LiClO₄/Li_1+xV₃O₈ decreases with an increase of the discharge current density.     

Poly(ammonioalkanesulfonate) Blends with Polar Organic Species and Alkali Metal Salts: Structure,Glass Transition and Ionic Conductivity

Because the dipole moment of its zwitterionic side group is very high (μ∼23 D), poly[3-(N,N-diethyl-N-(5-methacryloyoxy-3-oxopentyl)-ammonio) propanesulfonate] affords a unique polar host matrix possessing a strong solvation power towards a variety of polar or ionic guest species. Water, glycerol, liquid ethylammonium nitrate, triethylammoniopropanesulfonate are all good plasticizers with a fairly similar efficiency of ΔT_g∼−2°C/mol% of additive, while a dizwitterion behaves as a weak antiplasticizer. The stoichiometric blends of the polyzwitterion with alkali metal salts of low enough lattice energy such as thiocyanates, trifuoromethanesulfonates, iodides, perchlorates, tetrafluoro or tetraphenylborates, are amorphous systems showing a single glass transition, with plasticization or antiplasticization effects depending on the salt nature. Microphase separation systematically occurs in these binary systems but long-range order is observed only in some cases, with development of lamellar (I⁻) or hexagonal (SCN⁻) structures. Conductivity increases and the dielectric constant of the material decreases as salt is added. The activation energies of the conductivity are not strongly affected either by the state of the material, glassy or viscoelastic, or by the salt nature. © 1997 John Wiley & Sons, Ltd.     

Single-Li~+ conductivity in ionomeric network

Ionomeric networks(IN)with lithium sulfate and sait-solvating oligo(oxyethylene)chainwere synthesized on the purpose of improving the conductivity of single-Li~+-ionic conductors.Li~+-ionicconductivity depends considerably on the salt content of the INs although the apparent degree of cross-linking is fixed in a constant of 10 mol%.As salt content(Li/O value)equals 0.0467,conductivity ofthe IN containing neither small-molecular salt nor low molecular weight plasticizer reaches a maximumof 7×10~(-6) S/cm at 25℃.Temperature-conductivity relationship of the INs shows curved Arrheninsplots,suggesting that the ionic conduction is primarily influenced by segmental motion of the polymerhost.In addition,WLF(Williams-Landel-Ferry)equation is used to analyze the conductivity data,from which the related WLF parameters are determined.     

Synthesis and characterization of novel alternating fluorinated copolymers bearing oligo(ethylene oxide) side chains

The synthesis and characterization of novel poly(CTFE‐g‐oligoEO) graft copolymers [chlorotrifluoroethylene (CTFE) and ethylene oxide (EO)] are presented. First, vinyl ether monomers bearing oligo(EO) were prepared by transetherification of ω‐hydroxyoligo(EO) with ethyl vinyl ether catalyzed by a palladium complex in 70–84% yields. Two vinyl ethers of different molecular weights (three and 10 EO units) were thus obtained. Then, radical copolymerization of the above vinyl ethers with CTFE led to alternating poly(CTFE‐alt‐VE) copolymers that bore oligo(OE) side chains in satisfactory yields (65%). These original poly(CTFE‐g‐oligoEO) graft copolymers were characterized by ¹H, ¹⁹F, and ¹³C NMR spectroscopy. Their molecular weights reached 19,000 g mol^?1, and their thermal properties were investigated while their glass transition temperatures ranged between ?42 and ?36 °C. Their thermogravimetric analyses under air showed decomposition temperatures of 270 °C with 10% weight loss (T_d,10%). These novel copolymers are of potential interest as polymer electrolytes in lithium ion batteries, showing room temperature conductivities ranging from 4.49 × 10^?7 to 1.45 × 10^?6 S cm^?1 for unplasticized material. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013