Effect of Tacticity of Poly(Methyl Methacrylate) on Conductivity of Poly(Ethylene Oxide)-Poly(Methyl Methacrylate) Blend-Based Polymeric Electrolytest

Abstract

Polymer electrolytes based on blends of poly(ethylene oxide) (PEO) with various stereoisomers of poly(methyl methacrylate) (PMMA) were studied by means of impedance spectroscopy and DSC. It was found that isotactic poly(methyl methacrylate) (1PMMA)-based electrolytes exhibit ambient temperature conductivities at least one order of magnitude higher than the electrolytes containing other stereoisomers of PMMA. The highest value of room temperature conductivity equal to 9 × 10^?5 S/cm was measured for a sample containing 30 wt% IPMMA. The effect observed results from the presence of a flexible amorphous phase in PEO-IPMMA blends which is favorable for fast ionic transport. A small increase of ionic conductivity with decreasing molecular weight of the added atactic poly(methyl methacrylate) was also observed.     

Compatibility of Poly(vinyl chloride) with Polyalkyleneoxides. I. Poly(methylene oxide) and Poly(ethylene oxide)

The compatibility of poly(vinyl chloride) (PVC) with linear polyethers is examined over the entire composition range. This study examines blends with poly(methylene oxide) (PMO) and poly(ethylene oxide) (PEO) of medium (MMW) and high (HMW) molecular weight. The techniques used are dynamic mechanical analysis, DSC, and optical microscopy (phase contrast and polarizing). The results indicate that all polyethers show limited miscibility in the melt at high PVC contents. Proper analysis of the T_m data using the Kwei-Frisch and Hoffman-Weeks procedures allows the determination of the thermodynamic interaction parameter, which is found to be close to zero for all pairs of blends.     

Head to Head Polymers. 42. Head to Head Poly(Vinyl Halide) Blends: Thermal and Degradation Behavior

Abstract

Improved halogenation techniques for poly(1, 4-butadiene) have made well-defined head to head poly(vinyl chloride) and head to head poly(vinyl bromide) accessible in larger quantities. This allowed the preparation and study of blends of poly(vinyl chloride) or poly(vinyl bromide) with polycaprolactone and poly(methyl methacrylate); blends were also prepared between the poly(vinyl halides). The thermal behavior and the thermal degradation behavior of these blends were investigated. It was confirmed that head to head and head to tail poly(vinyl chloride) are immiscible over almost the entire range of compositions.     

Dynamic and Isothermal Thermogravimetric Degradation of Poly(vinyl Chloride)/Chlorinated Poly(ethylene) Blends

The thermal degradation of poly(vinyl chloride)/chlorinated poly(ethylene) (PVC/CPE) blends of different compositions was investigated by means of dynamic and isothermal thermogravimetric analysis in flowing atmosphere of nitrogen. Kinetic parameters (the apparent activation energy E, and pre-exponential factor Z) were calculated after Flynn-Wall-Ozawa method for the first stage of dynamic degradation of PVC/CPE blends, and after Flynn method for the isothermal degradation. In both cases, there is the compensation dependence between the values E and logZ. The values of compensation ratios as well as the characteristics of TG and DTG curves, confirm the stabilizing effect of CPE on PVC dehydrochlorination. This revised version was published online in July 2006 with corrections to the Cover Date.     

Preparation and Characterization of Blend Films of Poly(Vinyl Alcohol) and Sodium Alginate

Blend films of poly(vinyl alcohol) (PVA) and sodium alginate (NaAlg) were prepared by casting from aqueous solutions. This blend films were characterized by tensile strength test, Fourier transform infrared spectroscopy (FT‐IR), thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The miscibility in the blends of PVA and NaAlg was established on the basis of the thermal analysis results. DSC showed that the blends possessed single, composition‐dependent glass transition temperatures (T_gs), indicating that the blends are miscible. FT‐IR studies indicate that there is the intermolecular hydrogen bonding interactions, i.e. –OH…^?OOC– in PVA/NaAlg blends. The blend films also exhibited the higher thermal stability and their mechanical properties improved compared to those of homopolymers.     

Chemical and electrochemical doping in poly(paraphenylene vinylene) blends

Blends of poly(p-phenylene vinylene) (PPV), with other polymers were made by film-casting from an aqueous mixture of the water-soluble sulfonium salt precursor to PPV and the second polymer. The rates of chemical doping, using As F₅, and of electrochemical doping, using perchlorate counter ion, of the PPV component are strongly influenced by the nature of the added macromolecule. In all cases studied the blends appear to be phase separated under all conditions. The most versatile blend was with poly(ethylene oxide) (PEO), which could be heated to 225°C without degradation and which yielded the highest electrical conductivity when doped. The utility of blends was demonstrated using free-standing PPV/PEO blend samples as rechargeable battery electrodes.     

Miscibility and interactions in blends of two proton‐donating polymers: Poly(acrylic acid)/poly(p‐vinylphenol) blends

Blends of poly(acrylic acid) (PAA) and poly(p‐vinylphenol) (PVPh) were prepared from N,N‐dimethylformamide (DMF) and ethanol solutions. The DMF‐cast blends exhibited single T_g's, as shown by modulated differential scanning calorimetry, whereas the ethanol‐cast blends had double T_g's. Fourier transform infrared spectroscopy showed that there was a specific interaction between PAA and PVPh in the DMF‐cast blends. The single‐T_g blends cast from DMF showed single‐exponential decay behavior for the proton spin–lattice relaxation in both the laboratory frame and the rotating frame, indicating that the two polymers mixed intimately on a scale of 2–3 nm. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 789–796, 2003     

Phase Behaviour of Poly(styrene-co-methacrylic acid)/ Poly(styrene-co-N,N-dimethylacrylamide)/Poly(styrene-co-4-vinylpyridine) Ternary Blends by DSC and FTIR

Summary: we have investigated by DSC and FTIR the miscibility and phase behaviour of binary and ternary blends of different ratios of poly(styrene-co-methacrylic acid) containing 15 mol% of methacrylic acid (SMA15) with poly(styrene-co-N,N-dimethylacrylamide) containing 17 mol% of N,N,-dimethylacrylamide (SAD-17) and poly(styrene- co-4-vinylpyridine) containing 15 mol% of 4-vinylpyridine. SMA15 is miscible with both SAD17 and S4VP15 and interacts more strongly with S4VP15 than with SAD17 as evidenced by the positive deviations from linear average line observed with these blends and the appearance of new bands in the 1800–1550 cm⁻¹ region. This behaviour is known as ΔK effect. The FTIR study confirms that though the specific intermolecular interactions that occurred with each pair of the SMA15/S4VP15 and SMA15/SAD17 binary components are of different strength, they still exist in the ternary blend. Even though the three binary polymer pairs are individually miscible, the ternary system of SMA15/S4VP15/SAD17 exhibits only partial miscibility with small loop of immiscibility due to a significant ΔK effect. These results obtained by DSC and FTIR are in a fair agreement with theoretical prediction applying the Painter-Coleman association model.     

Fractionated Crystallization Kinetics and Polymorphic Homocrystalline Structure of Poly(L-lactic acid)/Poly(D-lactic acid) Blends: Effect of Blend Ratio

Stereocomplex (SC) crystallization has been an effective way to improve the physical performances of stereoregular polymers. However, the competition between homo and SC crystallizations can lead to more complicated crystallization kinetics and polymorphic crystalline structure in stereocomplexable polymers, which influences the physical properties of obtained materials. Herein, we select the medium-molecular-weight (MMW) poly(_L-lactic acid)/poly(_D-lactic acid) (PLLA/PDLA) asymmetric blends with different PDLA fractions (f_D=0.01–0.5) as the model system and investigate the effects of f_D and crystallization temperature (T_c) on the crystallization kinetics and polymorphic crystalline structure. We observe the fractionated (i.e., multistep) crystallization kinetics and the formation of peculiar β-form homocrystals (HCs) in the asymmetric blends under quiescent conditions, which are strongly influenced by both f_D and T_c. Precisely, crystallization of β-form HCs is favorable in the MMW PLLA/PDLA blends with high f_D (≥0.2) at a low T_c (80–100 °C). It is proposed that the formation of metastable β-form HCs is attributed to the conformational matching between β-form HCs and SCs, and the stronger constrain effects of precedingly-formed SCs in the early stage of crystallization. Such effects can also cause the multistep crystallization kinetics of MMW PLLA/PDLA asymmetric blends in the heating process.

     

Compatibility of poly(vinyl chloride) with polyalkyleneoxides. II. Poly(propylene oxide) and poly(tetramethylene oxide)

This study [Part II of a series dealing with the compatibility of polyalkyleneoxides with poly(vinyl chloride)] examines blends of PVC with poly(propylene oxide) (PPrO) and poly(tetra-methylene oxide) (PTMO), covering the entire composition range. Morphological, dynamic mechanical and thermal properties investigated indicate that PVC/PPrO blends are incompatible, whereas the PVC/PTMO system shows miscibility in the melt. For this polyblend and at high polyether compositions where the Hoffman–Weeks analysis can be applied, T_m equilibrium data allow the determination of the thermodynamic interaction parameter, χ₁₂ = ?0.15. Experimental compatibility data of all polyether-PVC pairs investigated in Parts I and II are also used to test various blend miscibility prediction schemes, using solubility parameter theory and recent theory on copolymer-copolymer miscibility.     

Miscibility and Thermal Behaviour of Poly(styrene-co-itaconic acid)/Poly(butyl methacrylate-co-4-vinylpyridine) Mixtures. Accessibility and Self-Association Effects

Summary: The miscibility and thermal behaviour of binary mixtures of poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA-11 or PSIA27) with poly(butyl methacrylate) (PBMA)or poly(butyl methacrylate-co-4-vinylpyridine) containing 10 or 26 mol% of 4-vinylpyridine (PBM4VP-10, PBM4V-P26) were investigated by differential scanning calorimetry, scanning electron microscopy, FTIR spectroscopy and thermogravimetry. The results showed that 11 mol % of itaconic acid and 10 mol % of 4-vinylpyridine respectively introduced within the polystyrene and poly(butyl methacrylate) matrices induced the miscibility of this pair of polymers due to specific interactions of hydrogen bonding type with partial pyridine protonation that occurred between the two copolymers as evidenced by FTIR from the appearance of two new bands at 1607 cm⁻¹ and 1640 cm⁻¹. Increasing itaconic acid content from 11 to 27 mol % led to a decrease of the intensity of the specific interactions within PSIA-27/PBM4VP blends and is attributed to both accessibility and self association effects as evidenced by DSC from the change of the shape of the Tg- composition curves and by FTIR spectroscopy. As shown from the thermogravimetric study, the presence of these specific interactions delayed the anhydride formation and improved the thermal stability of the blends.     

Synthesis,Characterization and Application of Amphiphilic Copolymer Poly(vinyl alcohol)-g-Poly(butyl acrylate)

An amphiphilic graft copolymer poly(vinyl alcohol)-g-poly(butyl acrylate) (PVA-g-PBA) was synthesized by grafting butyl acrylate (BA) onto poly(vinyl alcohol) (PVA) with potassium persulfate (KPS) as free radical initiator in N₂ atmosphere and aqueous medium. The formation of graft copolymer was confirmed by means of infrared spectroscopy (IR). The influences of initiator, monomer concentration and reaction time on the percentage of monomer conversion(C _M), graft degree(Gd) and graft efficiency(Ge) have been discussed in detail. PVA-g-PBA was used as compatibilizer in blends of chlorinated polyethylene (CPE)/ poly(acrylic acid-co-acrylamide)[P(AA-AM)], and the compatibility between CPE and P(AA-AM) was also investigated.     

Poly(ether ether ketone)/poly(aryl ether sulfone) blends: Melt rheological behavior

Dynamic rheological measurements were carried out on blends of poly(ether ether ketone) (PEEK)/poly(aryl ether sulfone) (PES) in the melt state in the oscillatory shear mode. The data were analyzed for the fundamental rheological behavior to yield insight into the microstructure of PEEK/PES blends. A variation of complex viscosity with composition exhibited positive–negative deviations from the log‐additivity rule and was typical for a continuous‐discrete type of morphology with weak interaction among droplets. The point of transition showed that phase inversion takes place at composition with a 0.6 weight fraction of PEEK, which agreed with the actual morphology of these blends observed by scanning electron microscopy. Activation energy for flow, for blend compositions followed additive behavior, which indicated that PEEK/PES blends may have had some compatibility in the melt. Variation of the elastic modulus (G′) with composition showed a trend similar to that observed for complex viscosity. A three‐zone model used for understanding the dynamic moduli behavior of polymers demonstrated that PEEK follows plateau‐zone behavior, whereas PES exhibits only terminal‐zone behavior in the frequency range studied. The blends of these two polymers showed an intermediate behavior, and the crossover frequency shifted to the low‐frequency region as the PEEK content in PES increased. This revealed the shift of terminal‐zone behavior to low frequency with an increased PEEK percentage in the blend. Variation of relaxation time with composition suggested that slow relaxation of PEEK retards the relaxation process of PES as the PEEK concentration in the blend is increased because of the partial miscibility of the blend, which affects the constraint release process of pure components in the blend. A temperature‐independent correlation observed in the log–log plots of G′ versus loss modulus (G″) for different blend systems fulfilled the necessary condition for their rheological simplicity. Further, the composition‐dependent correlations of PEEK/PES blends observed in a log–log plot of G′ versus G″ showed that the blends are either partially miscible or immiscible and form a discrete‐continuous phase morphology. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1548–1563, 2004     

Synthesis and Complexation Studies of a Tetra(N,N-dimethyl) Aminoethylamide p-tert-butyl Calix[4]arene and Its Tetramethylammonium Derivative

We describe the synthesis of two functionalised p-tert-butyl calix[4]arenes: tetra(N,N-dimethyl) aminoethylamide derivative 1 and related tetramethylammonium 2. Their complexation properties towards alkali and zinc metal cations are reported along with complexation of perchlorate anion by 2.     

Aliphatic Polyester Blends Based upon Poly(Lactic Acid) and Oligomeric Poly(Hexamethylene Succinate)

Abstract

In an attempt to gain a degree of control over the mechanical and degradation properties of poly(lactic acid) [PLA], large-scale efforts are underway to alter the phase morphology of PLA through chemical and physical modification. Consistent with this theme, our work aims to adjust the molecular architecture of highly amorphous PLA with an increasing concentration of hydroxy-terminated oligomeric poly(hexamethylene succinate) [PHS]. Gel-permeation chromatography (GPC) verifies the enhanced presence of PHS in the blends with a concomitant reduction in number-average molecular weight as the weight fraction of PHS is raised from 0.10 to 0.40. Differential scanning calorimetry (DSC) indicates amorphous phase compatibility between PHS and PLA at weight compositions of 10/90 and 20/80. However, as the amount of PHS approaches 30 and 40 wt%, the PHS exhibits the ability to crystallize independently from the induced PLA crystalline phase. Dynamic mechanical thermal analysis (DMTA) illustrates variable behavior of the materials under tension as a consequence of structural alterations generated by the oligoester. Finally, preliminary results suggest that these alterations may suppress the hydrolytic degradation of PLA.     

Crystallization of Poly(ε‐caprolactone)/Poly(vinyl chloride) Miscible Blends Under Strain: The Role of Molecular Weight

Summary: The effect of poly(ε‐caprolactone) (PCL) molecular weight on the orientation of crystalline PCL in miscible poly(ε‐caprolactone)/poly(vinyl chloride) (PCL/PVC) blends, melt crystallized under strain, has been studied by a combination of wide angle X‐ray diffraction (WAXD) and small angle X‐ray scattering (SAXS) studies. An unusual crystal orientation with the b‐axis parallel to the stretching direction was observed in miscible PCL/PVC blends with PCL of high molecular weight (>21 000). SAXS showed the presence of nanosize confined PCL in the PCL/PVC blends, which could be preserved at temperatures higher than the T_m of PCL but lower than the T_g of PVC. A mechanism based on the confinement of PCL crystal growth was proposed, which can explain the formation of b‐axis orientation in PCL/PVC blends crystallized under strain.

SAXS pattern of stretched PCL/PVC blend after annealing at 90 °C for 5 min.     

New Poly(4-Chloro)Maleimides. I. Synthesis and Characterization of Poly[Ether-Ester-(4-Chloro)Maleimides]

Abstract

New poly[N-(ester)-3-(ether)-4-(chloro)]maleimides were synthesized by the reaction of N-(4-chlorocarbonylphenyl)-3,4-dichloromaleimide (3) with various bisphenols such as hydroquinone (8a), 2,2-bis-(4-hydroxyphenyl)propane (8b), 4,4′ -(hexafluoroisopropylidene)diphenol (8c), and 2,5-bis(4-hydroxybenzylidene)cyclopentanone (8d). The structures of the resulted polymers were confirmed by IR and elemental analyses. A series of model compounds (4–7) was synthesized to facilitate confirmation of the structure of the polymers. The polymer containing hydroquinone units (9a) exhibited LC behavior in the melt, as observed by PLM measurements.     

Dynamics of Poly(vinylmethyl ether) Blends with a Strongly Interassociating Copolymer

We apply broadband dielectric relaxation spectroscopy to probe the dynamics of hydrogen bonded polymer blends. A copolymer consisting of 2,3-dimethylbutadiene (DMB) [86%] and p-(hexafluoro-2-hydroxyl-2-propyl)styrene (HFS) [14%] was synthesized and blended with poly(vinylmethyl ether) (PVME). The copolymer is capable of forming strong intermolecular hydrogen bonds, while minimizing the degree of intramolecular associations, and its blends with PVME are predicted to be miscible over the entire composition range. Two segmental processes, α and α₁, are present in blends containing 26, 50, and 76 weight percent copolymer. The slower process (α₁) is assigned to the segmental motion of the intermolecularly associated copolymer, and the faster process (α) to segmental motions of PVME modified by the HFS:DMB copolymer. A relaxation associated with residual water is present in the glassy state. A local process due to motions of the PVME ether groups (β) is also present in the glassy state, and does not change with blend composition.     

Oxidation of Poly(2,3-dimethylbutadiene-1,3)

Abstract

Poly(2,3-dimethylbutadiene-1,3) containing cis-1,4, trans-1,4, and 1,2 structural units in various proportions undergoes rapid oxidation even at room temperature. The process of oxidation is accompanied by cyclization. The concentration of peroxides that form at room temperature is relatively very high, reaching the value of one peroxidic group per 16 monomeric units. The formation of six-membered rings involving the peroxidic bonds in poly(2,3-dimethylbutadiene) is accompanied by degradation.     

Poly(thioester)s

Syntheses and properties of aliphatic and aromatic polythioesters (PTEs) were reviewed including polythiocarbonates and polythiourethanes. The content is subdivided into the following sections: PTEs of aliphatic α‐mercapto carboxylic acid, PTEs of ω‐mercapto carboxylic acids, PTEs derived from α,ω‐dimercapto alkanes, aromatic poly(thioester)s, aliphatic poly(thiocarbonate)s, aliphatic poly(thiourethane)s and aromatic polythiocarbonates. The synthetic strategies reviewed in this article include anionic and cationic ring‐opening polymerizations, polycondensations in bulk, polycondensations in solutions, interfacial polycondensations and in vitro enzymatic polycondensations.