Kinetic Determination of GA by the BZ Oscillating Chemical System

A new analytic method for the determination of gibberellic acid (GA) by perturbation causing different amounts of GA on the BZ oscillating chemical system involving the Mn(II)‐catalyzed reaction between L‐alanine, potassium bromate, and malonic acid in the acidic medium is proposed. The method relies on the linear relationship between the change in the oscillating period of the chemical system and the concentration of GA, which is in this work exposed for the first time. The calibration curve is linearly proportional to the concentration of GA over the range 1.0 × 10⁸ ?1.0 × 10^?6M, where the regression coefficient is 0.9998, and the detection limit is 5.0 × 10^?9 M of GA. Some aspects of the potential mechanism of action of GA on the BZ oscillating chemical system are discussed in detail.     

Fast determination of lead in lake sediment samples using electrothermal atomic absorption spectrometry with slurry samples introduction

An analytical method for the determination of glutamic acid by the sequential perturbation caused by different amounts of glutamic acid on the oscillating chemical system involving the Cu(II)-catalyzed oscillating reaction between hydrogen peroxide and sodium thiocyanate in an alkaline medium is proposed. The method relies on the linear relationship between the changes in the oscillation amplitude of the chemical system and the concentration of glutamic acid. The reaction is implemented in a continuous-flow stirred-tank reactor, and changes in the oscillation amplitude on each perturbation are proportional to the glutamic acid concentration. The use of the analyte pulse perturbation (APP) technique permits sequential determinations on the same oscillating system owing to the expeditiousness with which the steady state is regained after each perturbation. The dynamic range lies between 2.5x10(-6) and 3.2x10(-4) M of glutamic acid, with the regression coefficient is 0.9987. The precision is excellent (less than 0.68% as relative standard deviation (R.S.D.)). Some aspects of the potential mechanism of action of glutamic acid on the oscillating system are discussed.     

Trace determination of cobalt ion by using malic acid-malonic acid double substrate oscillating chemical system

A novel kinetic method for determination of trace amounts of cobalt ion was proposed and validated. The method is based on adding malic acid into classical Belousov-Zhabotinskii （B-Z） oscillating chemical system to form a double substrate one. The results showed that when the concentration of cobalt ion was in the range of 5.27× 10^-8 to 5.37 × 10^-12 mol L^-1, the change of the oscillating period was directly proportional to the negative logarithm of cobalt ion concentration. The sensitivity and precision of the developed method were quite satisfactory. The limit of detection was down to 5.20 × 10^-13 mol L^-1 which was a highest sensitivity found for determination of metal ions using oscillating chemical reaction so far. Some factors influencing the determination were also examined. The method has been successfully used to determine cobalt ion in vitamin B12 injection.     

Kinetic-spectrophotometric determination of ascorbic acid by inhibition of the hydrochloric acid-bromate reaction

A new analytical method was developed for the determination of ascorbic acid in fruit juice and pharmaceuticals. The method is based on its inhibition effect on the reaction between hydrochloric acid and bromate. The decolourisation of Methyl Orange by the reaction products was used to monitor the reaction spectrophotometrically at 510 nm. The linearity range of the calibration graph depends on bromate concentration. The variable affecting the rate of the reaction was investigated. The method is simple, rapid, relatively sensitive and precise. The limit of detection is 7.6 x 10(-6) M and calibration rang is 8 x 10(-6)-1.2 x 10(-3) M ascorbic acid. The relative standard deviation of seven replication determinations of 8 x 10(-6) and 2 x 10(-5) M ascorbic acid was 2.8 and 1.7%, respectively. The influence of potential interfering substance was studied. The method was successfully applied for the determination of ascorbic acid in pharmaceuticals.     

流动注射化学发光抑制法测定抗坏血酸

基于抗坏血酸对Ｌｕｍｉｎｏｌ－ＫＩＯ４－Ｈ２Ｏ２体系化学发光反应的抑制作用,建立了化学发光抑制快速测定抗坏血酸的新方法。该方法线性范围为１．０＊１０＾－７－１．０＊１０＾－５ｍｏｌ／Ｌ,检出限为６．０＊１０＾－８ｍｏｌ／Ｌ,对８．０＊１０＾－７ｍｏｌ／Ｌ抗坏血酸１１次平行测定的相对标准偏差为１．０％。用于维生素Ｃ片剂及注射液中抗坏血酸含量的测定,结果令人满意。     

Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

Interaction of some antioxidants with Belousov-Zhabotinsky reaction based on catechol-BrO 3 − -Mn2+-H2SO4 system

Temporal evolution of a new Mn(II) catalyzed Belousov-Zhabotinsky (BZ) chemical oscillator with catechol (1.2-dihydroxybenzene) as organic substrate is reported within narrow range of concentrations of initial reagents at 30°C. After optimizing the oscillation parameters the system was perturbed with the antioxidants like ascorbic acid and inosine. It is found that ascorbic acid acts as co-substrate within certain concentration limit, whereas inosine acts as a quencher of oscillations. Addition of ascorbic acid to the BZ system decreases induction time thus acting synergistically to help the reaction to enter quickly into the oscillatory regime. A good linear dependence of induction time on the concentration of ascorbic acid (R ² = 0.9948) and inosine (R ² = 0.955) is reported. Inosine has been found to increase the induction time and quench the oscillations. It is mentioned that the magnitude of induction time decreases to a greater extent with ascorbic acid as compared to the magnitude of its increase with the same concentration of inosine. This is pointing to the fact that ascorbic acid is stronger antioxidant than inosine as depicted by their interaction with catechol-based BZ chemical oscillator. Temporal evolution of the BZ reaction with the injection of antioxidants at different stages of reaction is also reported.     

Flow-injection determination of ascorbic acid and cysteine simultaneously with spectrofluorometric detection.

A simple and sensitive spectrofluorometric method was developed for the simultaneous determination of ascorbic acid and cysteine by a flow-injection system. This method is based on the reduction of Tl(III) with ascorbic acid or cysteine in acidic media, producing fluorescence reagent, TlCl3(2-) (lambdaex = 227 nm, lambdaem = 419 nm). The injected sample solution was divided into two separate streams. The first stream was treated with Tl(III) at pH 3.0 and then passed through a 270 cm reaction coil to the flow cell of the spectrofluorometer, where the fluorescence intensity was measured. This signal is related to ascorbic acid and cysteine concentration. The second part of the injected sample solution was treated with Tl(III) in HCl solution and then passed through a 50 cm reaction coil to the flow cell and the fluorescence intensity was measured. This signal is related only to cysteine. Thus, the ascorbic acid content was determined directly by the difference according to the calibration curve. Ascorbic acid and cysteine can be determined in the range of 1 x 10(-6) to 5.0 x 10(-5) M, at a rate of 16 samples per hour. The limits of detection (S/N = 3) were 8 x 10(-7) M for ascorbic acid and 7 x 10(-7) M for cysteine. The influence of potential interfering substances was studied. The proposed method was successfully applied to the simultaneous determination of both analytes in real samples.     

Catalytic oxidation of ascorbic acid by some ferrocene derivative mediators at the glassy carbon electrode. Application to the voltammetric resolution of ascorbic acid and dopamine in the same sample

Direct-current cyclic voltammetry is used to investigate the suitability of some ferrocene derivatives such as ferrocenecarboxylic acid, ferroceneacetic acid and ferrocenemethanol as mediators for ascorbic acid oxidation in aqueous solutions with low pH. The ascorbic acid coupled catalytically to three ferrocene derivatives exhibiting homogeneous second-order rate constants k(s), in the range 7.36 x 10(5) - 1.23 x 10(7). The catalytic oxidation peak current was linearly dependent on the ascorbic acid concentration and the linearity range obtained in the presence of ferrocenecarboxilic acid, having the largest second-order rate constant, was 5 x 10(-5) - 1.5 x 10(-3) M. The catalytic effect of the ferrocene derivatives on the electrochemical oxidation of ascorbic acid reduced the oxidation potential of ascorbic acid, resulting in the separation of the overlapping voltammograms of ascorbic acid and dopamine at the glassy carbon electrode in a mixture. This allowed the determination of ascorbic acid in the presence of dopamine. The calibration graph obtained by linear sweep voltammetry for ascorbic acid in the presence of dopamine of fixed concentration is linear in the range 5 x 10(-5) - 1.5 x 10(-3) M. In a similar manner, dopamine is determined in the presence of a high concentration of ascorbic acid, up to 100 times that of dopamine, using ferroceneacetic acid as the most suitable mediator for this purpose.     

Determination of ascorbic acid in pharmaceutical dosage forms and urine by means of an oscillatory reaction system using the pulse perturbation technique

A simple and reliable method for the determination of ascorbic acid (AA) is proposed and validated. It is based on potentiometric monitoring of the concentration perturbations of an oscillatory reaction system in a stable nonequilibrium stationary state close to the bifurcation point. The response of the Bray–Liebhafsky (BL) oscillatory reaction as a matrix, to the perturbation by different concentrations of AA, is followed by a Pt electrode. The linear relationship between maximal potential shift and the logarithm of the amount of AA is obtained between 0.01 and 1.0 μmol. The sensitivity of the proposed method (as the limit of detection) is 0.009 μmol and the method has excellent sample throughput (30 samples per hour). The procedure was used for AA determination in pharmaceutical formulations and urine. The results are in agreement with those obtained using the official method. Some aspects of the possible mechanism of AA action on the BL oscillating chemical system are discussed.     

Determination of some reactive oxygen species scavengers based on the peroxidase-oxidase oscillator

This paper reports a new method for detection of ROS scavengers including superoxide dismutase, ascorbic acid and glutathione based on a 'probe' of peroxidase-oxidase biochemical oscillator. The oscillation period and amplitude change with different concentrations of scavengers. The linear ranges of superoxide dismutase, ascorbic acid and glutathione are respectively 1.56 x 10(-4)-1.56 x 10(-3) mg mL(-1), 1.75 x 10(-7)-1.75 x 10(-5) mol L(-1) and 9.38 x 10(-7)-7.5 x 10(-5) mol L(-1). The selectivity, linearity and precision for superoxide dismutase, ascorbic acid, and glutathione are presented and discussed. The results compared well with other standard methods for determination of superoxide dismutase, ascorbic acid and glutathione. Some possible steps in the overall reaction mechanisms are discussed.     

Determination of ascorbic acid in pharmaceuticals and urine by reverse flow injection.

Two reverse flow injection (FI) methods, using spectrophotometric detection, are proposed for the determination of ascorbic acid. Both methods are based on its reaction with the ethylenediaminetetraacetic acid-CoIII complex in a medium of 5% diethylamine. In the first method, using the peak-height FI technique, ascorbic acid is determined over the range from 2 x 10(-4) to 5 x 10(-3) mol dm-3 and in the second, using the peak-width FI method, the working range is extended (2 x 10(-3)-5 x 10(-2) mol dm-3). Both FI methods were applied to the determination of ascorbic acid in pharmaceuticals while the peak-height FI technique was also used to determine ascorbic acid in urine.     

A poly(3-acetylthiophene) modified glassy carbon electrode for selective voltammetric measurement of uric acid in urine sample

A reliable and reproducible method for the determination of uric acid in urine samples has been developed. The method is based on the modification of a glassy carbon electrode by 3-acetylthiophene using cyclic voltammetry. The poly(3-acetylthiophene) modified glassy carbon electrode showed an excellent electrocatalytic effect towards the oxidation of uric acid in 0.1 m phosphate buffer solution (PBS) at pH 7.2. Compared with a bare glassy carbon electrode (GCE), an obvious shift of the oxidation peak potential in the cathodic direction and a marked enhancement of the anodic current response for uric acid were observed. The poly(3-acetylthiophene)/GCE was used for the determination of uric acid using square wave voltammetry. The peak current increased linearly with the concentration of uric acid in the range of 1.25 x 10(-5)-1.75 x 10(-4) M. The detection limit was 5.27 x 10(-7) M by square wave voltammetry. The poly(3-acetylthiophene)/GCE was also effective to determine uric acid and ascorbic acid in a mixture and resolved the overlapping anodic peaks of these two species into two well-defined voltammetric peaks in cyclic voltammetry at 0.030 V and 0.320 V (vs. Ag/AgCl) for ascorbic acid and uric acid, respectively. The modified electrode exhibited stable and sensitive current responses toward uric acid and ascorbic acid. The method has successfully been applied for determination of uric acid in urine samples.     

Spectrophotometric determination of a nanomolar amount of ascorbic acid using its catalytic effect on copper(II) porphyrin formation

A simple, fast and sensitive flow-injection method is proposed for the determination of nanomolar amounts of ascorbic acid in tea, urine and blood. The procedure is based on the accelerating effect of a nanomolar level of ascorbic acid on the reaction of cooper(II) with 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin, H(2)tmpyp(4+). Ascorbic acid reduces Cu(II) to Cu(I) which catalyzes the incorporation of Cu(II) into H(2)tmpyp(4+) to form Cu(II)(tmpyp)(4+). In this method two solutions, one containing ascorbic acid and H(2)tmpyp(4+) and the other containing copper(II) and acetate buffer (pH 5.0), were injected into two flowing streams of water through two sample injectors of 120 mu1 sample volume. The mixture was allowed to react in a 2 m reaction coil and the colored solution of Cu(II)(tmpyp)(4+) was monitored at 550 nm (epsilon = 2.01 x 10(4)M(-1)cm(-1)). The present method was applied to the determination of ascorbic acid in tea, urea and blood. Reducing agents such as sugars and vitamins B(1), B(2), B(6) and B(12) did not give serious errors at a concentration of 10(-6) M for the determination of 1.0 x 10(-8)M ascrobic acid. The relative standard deviation of the present method was 2.8% for the determination of 1.0 x 10(-8)M ascorbic acid. The reaction mechanism was clarified from the kinetic results of the formation of Cu(II)(tmpyp)(4+) in the presence of various concentrations of ascorbic acid, copper(II) and hydrogen ion.     

Simultaneous determination of ascorbic acid and acetylsalicylic acid in pharmaceutical formulations

A direct, simple, and practical first-derivative spectrophotometric method is described for simultaneous determination of ascorbic acid and acetylsalicylic acid. The effects of the solvent, excipients, and spectral variables on the analytical signal were investigated. The drugs were determined simultaneously with a 0.01 M methanolic hydrochloric acid solution as the solvent, and the signals were evaluated directly by using the zero-crossing method at 245.0 and 256.0 nm for acetylsalicylic acid and ascorbic acid, respectively. The method allows the simultaneous determinations of acetylsalicylic acid and ascorbic acid in the ranges of 6.6 x 10(-6) to 1.5 x 10(-4)M and 3.4 x 10(-6) to 2.0 x 10(-4)M, respectively, with standard deviation of <2.0%. The proposed method was applied to determinations of these drugs in tablets.     

Evaluation of luminol-H(2)O(2)-KIO(4) chemiluminescence system and its application to hydrogen peroxide, glucose and ascorbic acid assays

A novel chemiluminescence (CL) system was evaluated for the determination of hydrogen peroxide, glucose and ascorbic acid based on hydrogen peroxide, which has a catalytic-cooxidative effect on the oxidation of luminol by KIO(4). Hydrogen peroxide can be directly determined by luminol-KIO(4)-H(2)O(2) CL system. The detection limit was 3.0x10(-8) mol l(-1) and the calibration graph was linear over the range of 2.0x10(-7)-6.0x10(-4) mol l(-1). The relative standard deviation of H(2)O(2) was 1.1% for 2.0x10(-6) mol l(-1) (N=11). Glucose was indirectly determined through measuring the H(2)O(2) generated by the oxidation of glucose in the presence of glucose oxidase at pH 7.6. The present method provides a source for H(2)O(2), which, in turn, coupled with the luminol-KIO(4)-H(2)O(2) CL reaction system. The CL was linearly correlated with glucose concentration of 0.6-110 mug ml(-1). The relative standard deviation was 2.1% for 10 mug ml(-1) (N=11). Detection limit of glucose was 0.08 mug ml(-1). Ascorbic acid was also indirectly determined by the suppression of luminol-KIO(4)-H(2)O(2) CL system. The calibration curve was linear over the range of 1.0x10(-7)-1.0x10(-5) mol l(-1) of ascorbic acid. The relative standard deviation was 1.0% for 8.0x10(-7) mol l(-1) (N=11). Detection limit of ascorbic acid was 6.0x10(-8) mol l(-1). These proposed methods have been applied to determine glucose, ascorbic acid in tablets and injection.     

Electrocatalytic characteristics of a 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone modified carbon-paste electrode in the oxidation of ascorbic acid.

A carbon-paste electrode spiked with 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone was constructed by the incorporation of 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone in a graphite powder silicon oil matrix. It shown by cyclic voltammetry and double potential-step chronoamperometry, which this ferrocene derivative modified a carbon-paste electrode, can catalyze the ascorbic acid oxidation in an aqueous buffered solution. It has been found that under the optimum conditions (pH 7.00), the oxidation of ascorbic acid at the surface of this carbon paste modified electrode occurs at a potential of about 260 mV less positive than that of an unmodified carbon-paste electrode. The catalytic oxidation peak current was linearly dependent on the ascorbic acid concentration, and a linear calibration curve was obtained in the range of 6 x 10(-5) M-7 x 10(-3) M of ascorbic acid with a correlation coefficient of 0.9997. The detection limit (2sigma) was determined to be 6.3 x 10(-5) M. This method was also used for the determination of ascorbic acid in some pharmaceutical samples, such as effervescent tablets, ampoules and multivitamin syrup, by using a standard addition method. The reliability of the method was established by a parallel determination against the official method.     

Indirect determination of thiocyanate with ammonium sulfate and ethanol by extraction-flotation of copper

A new method for the indirect determination of thiocyanate with ammonium sulfate and ethanol by extraction-flotation of copper in the presence of ascorbic acid is described. A small amount of Cu(II) is reduced to Cu(I) by ascorbic acid, then Cu(I) is precipitated with SCN-. In the course of phase separation of ethanol from water, the precipitated CuSCN stays in the interface of ethanol and water. A good linear relationship is observed between the flotation yield of Cu(II) and the amount of SCN-. Using 1.0 ml of 1 x 10(-3) M ascorbic acid solution, 50 micrograms of Cu(II), 3.5 g of (NH4)2SO4 and 3.0 ml of ethanol with a total volume of 10 ml, the concentration of thiocyanate could then be determined by determining the flotation yield of Cu(II). The detection limit for thiocyanate is 5 x 10(-5) M. Every parameter was optimized and the reaction mechanism was studied. The method is simple and rapid and it was successfully applied to the determination of thiocyanate in urine and saliva of smokers and non-smokers and in venous blood of patients infused with sodium nitroprusside.     

Studies on the Interaction of Some Biologically Significant Radical Scavengers on Metal‐Ion Catalyzed Phloroglucinol‐Based Chemical Oscillator

The response of the Ce(III)‐catalyzed phloroglucinol (1,3,5‐trihydroxybenzene)‐based Belousov Zhabotinsky system to the addition of various antioxidants (ascorbic acid, glutathione, inosine, N‐acetylcysteine) is monitored at 30°C under stirred batch conditions. This method is convenient and has good sensitivity for the determination of these antioxidants. The addition of these antioxidants to the BZ mixture influences the oscillatory parameter (number of oscillations) to an extent that depends on the concentration of the antioxidant. The experimental results have shown that the number of oscillations decrease on increasing the concentration of antioxidant. The calibration plots show a linear relationship (R² = 0.98 for ascorbic acid and glutathione and R² = 0.99 for inosine and N‐acetylcysteine) between the number of oscillations and the [antioxidant] over the concentration range of 0.0125‐0.5, 0.05‐0.2, 0.025‐0.1, and 0.1‐0.5 mol L^?1 with detection limits 6.9 × 10^?5, 2.762 × 10^?4, 1.381 × 10^?4, and 5.524 × 10^?4 mol L^?1 for ascorbic acid, glutathione, inosine, and N‐acetylcysteine, respectively. Some aspects of the mechanism of these antioxidants on the BZ system have been discussed.     

Determination of gases (NO, CO, Cl(2)) using mixed-mode regimes in the Belousov-Zhabotinskii oscillating chemical reaction

We show a principle possibility of the determination of gases concentrations (NO, CO, Cl(2)) by their affect on mixed-mode oscillations in the Belousov-Zhabotinskii (BZ) oscillating chemical reaction. These oscillations are characterized by single large amplitude oscillation followed by a number of small amplitude oscillations. The method of the determination is based on a construction of a calibration plot given by the dependence of the number of small amplitude oscillations on gas concentration.