Simultaneous determination of trace amounts of zinc, lead and copper in rum by anodic stripping voltammetry

The determination of traces of Zn, Pb and Cu in rum samples by anodic stripping voltammetry without previous treatment or addition of a supporting electrolyte, using a hanging mercury drop electrode, is described. The choice of an appropriate stripping voltammetric method and deposition potential minimizes the influence of the organic content and ensures good reproductibility of the measurements. The reliability of the method was tested by comparing the results with those given by absorption spectrometry, the differences being about 10%. The method allows heavy metal ions to be determined in the mug l(-1) concentration range.     

Reactions of C(6)F(5)Li with tetracyclone and 3-ferrocenyl-2,4, 5-triphenylcyclopentadienone: An (19)F NMR and X-ray crystallographic study of hindered pentafluorophenyl rotations

Tetracyclone, 2a, reacts with C(6)F(5)Li to yield 2-pentafluorophenyl-2,3,4,5-tetraphenylcyclopent-3-en-1-one, 7, and 5-hydroxy-5-pentafluorophenyl-1,2,3,4-tetraphenylcyclopentadiene, 8, as the result of 1,6 and 1,2 additions, respectively. In contrast, treatment of 3-ferrocenyl-2,4,5-triphenylcyclopentadienone, 2b, with lithiopentafluorobenzene leads to 4-ferrocenyl-4-pentafluorophenyl-2, 3,5-triphenylcyclopent-2-en-1-one, 9, and 5-hydroxy-5-pentafluorophenyl-2-ferrocenyl-1,3, 4-triphenylcyclopentadiene, 10, the products of 1,4 and 1,2 addition, respectively. The structures of 7-9 have been established by X-ray crystallography, and the barriers to rotation (19-21 kcal mol(-)(1)) of the pentafluorophenyl groups in 8-10 have been studied by variable-temperature (19)F NMR. Nucleophilic attack at the ferrocenyl-bearing carbon in 2b is rationalized in terms of a zwitterionic structure in which the positive charge of the "cyclopentadienyl cation" is delocalized onto the iron atom in the organometallic substituent.     

Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

Determination of Aldehydes and Ketones in Fuel Ethanol by High-Performance Liquid Chromatography with Electrochemical Detection

A new methodology was developed for analysis of aldehydes and ketones in fuel ethanol by high-performance liquid chromatography (HPLC) coupled to electrochemical detection. The electrochemical oxidation of 5-hydroxymethylfurfural, 2-furfuraldehyde, butyraldehyde, acetone and methyl ethyl ketone derivatized with 2,4-dinitrophenylhydrazine (DNPH) at glassy carbon electrode present a well defined wave at +0.94 V; +0.99 V; +1.29 V; +1.15 V and +1.18 V, respectively which are the basis for its determination on electrochemical detector. The carbonyl compounds derivatized were separated by a reverse-phase column under isocratic conditions with a mobile phase containing a binary mixture of methanol / LiClO_4(aq) at a concentration of 1.0 × 10⁻³ mol L⁻¹ (80:20 v/v) and a flow-rate of 1.1mL min⁻¹ . The optimum potential for the electrochemical detection of aldehydes-DNPH and ketones-DNPH was +1.0 V vs. Ag/AgCl. The analytical curve of aldehydes-DNPH and ketones-DNPH presented linearity over the range 5.0 to 400.0 ng mL⁻¹, with detection limits of 1.7 to 2.0 ng mL⁻¹ and quantification limits from 5.0 to 6.2 ng mL⁻¹, using injection volume of 20 μL. The proposed methodology was simple, low time-consuming (15 min/analysis) and presented analytical recovery higher than 95%.     

Electrochemical Determination of Organic Compounds in Automotive Fuels

This article critically reviews the electroanalytical methods devoted for the determination of organic compounds in automotive fuels that can range from contaminants to additives typically introduced into liquid biofuels and liquid fossil fuels. Contaminants such as aldehydes and ketones in bioethanol, free fatty acids and glycerol in biodiesel, and sulfur and nitrogen organic compounds in gasoline and diesel fuel, and additives such as colour markers and antioxidants added to fuels were determined by electroanalytical methods. Special focus is given to electrodes, electrochemical techniques, and sample preparation strategies. Future directions of research on electroanalysis of liquid fuels are presented.     

A Highly Versatile Catalyst System for the Cross‐Coupling of Aryl Chlorides and Amines

The syntheses of 2‐(di‐tert‐butylphosphino)‐N,N‐dimethylaniline ( L1 , 71 %) and 2‐(di‐1‐adamantylphosphino)‐N,N‐dimethylaniline ( L2 , 74 %), and their application in Buchwald–Hartwig amination, are reported. In combination with [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂, these structurally simple and air‐stable P,N ligands enable the cross‐coupling of aryl and heteroaryl chlorides, including those bearing as substituents enolizable ketones, ethers, esters, carboxylic acids, phenols, alcohols, olefins, amides, and halogens, to a diverse range of amine and related substrates that includes primary alkyl‐ and arylamines, cyclic and acyclic secondary amines, N? H imines, hydrazones, lithium amide, and ammonia. In many cases, the reactions can be performed at low catalyst loadings (0.5–0.02 mol % Pd) with excellent functional group tolerance and chemoselectivity. Examples of cross‐coupling reactions involving 1,4‐bromochlorobenzene and iodobenzene are also reported. Under similar conditions, inferior catalytic performance was achieved when using Pd(OAc)₂, PdCl₂, [PdCl₂(cod)] (cod=1,5‐cyclooctadiene), [PdCl₂(MeCN)₂], or [Pd₂(dba)₃] (dba=dibenzylideneacetone) in combination with L1 or L2 , or by use of [Pd(allyl)Cl]₂ or [Pd(cinnamyl)Cl]₂ with variants of L1 and L2 bearing less basic or less sterically demanding substituents on phosphorus or lacking an ortho‐dimethylamino fragment. Given current limitations associated with established ligand classes with regard to maintaining high activity across the diverse possible range of C? N coupling applications, L1 and L2 represent unusually versatile ligand systems for the cross‐coupling of aryl chlorides and amines.     

Preparation and Characterization of Graphite‐Epoxy Composite Modified with Zinc Hexacyanoferrate and Their Electrochemical Behaviour in Presence of Substituted Anilines

The growth of zinc hexacyanoferrate (ZnHCF) hybrid film on the surface of graphite‐epoxy composite (GEC) electrodes was demonstrated by cyclic voltammetry. Surface morphology of the hybrid film was investigated by using scanning electron microscopy. The effect of the type of monovalent cations on the redox behaviour of hybrid film was also studied. This effect indicated that the radius of the hydrated cation mainly determines the ion permeability of the film.