Density and Speed of Sound for Binary Mixtures of a Cyclic Ether with a Butanol Isomer

Densities and speeds of sound of the binary mixtures 1,3-dioxolane + 1-butanol, 1,3-dioxolane + 2-butanol, 1,4-dioxane + 1-butanol, and 1,4-dioxane + 2-butanol have been measured at 25 and 40°C. The excess molar volumes and excess isentropic compressibility coefficients were calculated from experimental data and fitted to a Redlich–Kister polynomial function. Results were analyzed in terms of molecular interactions and compared with literature data.     

Densities and speeds of sound for binary mixtures of (1,3-dioxolane or 1,4-dioxane) with (2-methyl-1-propanol or 2-methyl-2-propanol) at the temperatures (298.15 and 313.15) K

This paper reports densities and speeds of sound for the binary mixtures of (1,3-dioxolane or 1,4-dioxane) with (2-methyl-1-propanol or 2-methyl-2-propanol) at the temperatures (298.15 and 313.15) K. Excess volumes and excess isentropic compressibility coefficients have been calculated from experimental data and fitted by means of a Redlich-Kister type equation. The ERAS model has been used to calculate the excess volumes of the four systems at both temperatures.     

Thermodynamic analysis of surface formation of {1,4-dioxane + 1-alkanol} mixtures

Surface tensions (sigma) for {1,4-dioxane + methanol, ethanol, or 1-propanol} at the temperature 298.15 K and normal atmospheric pressure have been determined as a function of mole fractions. The experimental results have been analyzed using the ideal and Langmuir models and in the light of the well-documented bulk properties of these systems, which reflect hydrogen bonding between the alcohol and 1,4-dioxane molecules. For {1,4-dioxane + ethanol} surface tensions were also measured at other temperatures between 288.15 and 308.15 K, and these data were used to calculate the surface entropy and enthalpy per unit area.     

Kinetics of oxidation of organic compounds by silver(II) in aqueous perchloric acid solution. IV. Aliphatic alcohols

The kinetics and mechanism of the silver(II) oxidation of methanol, ethanol, 1-propanol, 1-methyl- ethanol, 1-butanol, 2-methyl-1-propanol, 2-butanol, 2-methyl-2-propanol, D₄-methanol, and D₆-methanol have been investigated at 8.0 and 20.0°C in aqueous perchloric acid media (1.00 ≤ [HClO₄] ≤ 4.00M; μ = 4.0M). The kinetics were monitored by following the disappearance of Ag(II) with a spectrophotometric stopped-flow technique. The reactions are first order in each reactant and involve both Ag²⁺ and AgOH⁺ species. No kinetic or spectroscopic evidence for complex formation between reactants was obtained. The results are discussed with reference to electron density on the ? OH or αC-H substrate sites and to the isotopic hydrogen/deuterium rate quotients found for methanol and ethanol.     

Enthalpies of transfer of 2-methyl-2-propanol from water to mixtures of water with methanol,ethanol and 1,4-dioxane

The enthalpies of transfer of 2-methyl-2-propanol (TBA) from water to mixtures of water with methanol, ethanol and 1,4-dioxane have been measured. The data are considered in terms of recently developed theory, and it is found that the enthalpies of transfer can be reproduced quantitatively over most of the composition range in each solvent system. The parameters recovered from the analyses indicate that the net effect of TBA on the solvent structure is a breaking of solvent-solvent bonds and that TBA is preferentially hydrated in the aqueous alcohol systems, but randomly solvated in the water+1,4-dioxane system. It is also found that the model parameters for TBA solvation in the alcohol systems are independent of the alcohol.     

Vinyl Ethers Containing an Epoxy Group: XXII. Synthesis and Base-Catalyzed Transformations of 1-(Allyloxy)- and 1-[2-(Vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols

Reactions of 2-(allyloxymethyl)- and 2-[2-(vinyloxy)ethoxy]methyloxiranes with 2-propynol (～3 wt % of t-BuOK, 75–85°C, 5–10 h) lead to formation of new 1-organyloxy-3-(2-propynyloxy)propan-2-ols (yield 65–95%). On heating to 45–100°C in the presence of bases (KOH, t-BuOK), 1-allyloxy- and 1-[2-(vinyloxy)ethoxy]-3-(2-propynyloxy)propan-2-ols are transformed into the corresponding 2-vinyl-1,3-dioxolane, 6-methyl-2,3-dihydro-1,4-dioxine, 6-methylene-1,4-dioxane, and 2,3-dihydro-5H-1,4-dioxepine derivatives, whose yield and ratio strongly depend on the solvent nature, catalyst, and substituent at the hydroxy group. 2-Vinyl-1,3-dioxolane and 6-methyl-2,3-dihydro-1,4-dioxine derivatives are formed as the major products (yield 70–99%) in the presence of t-BuOK in aprotic media (toluene, THF, DMSO) or in the absence of a solvent as a result of prototropic isomerization followed by intramolecular heterocyclization. Intramolecular nucleophilic cyclization of 3-(2-propynyloxy)propan-2-ols to 6-methylene-1,4-dioxane is the predominant process in water in the presence of KOH. In all cases, the fraction of 2,3-dihydro-5H-1,4-dioxepine derivatives among the cyclization products ranges from 0 to 5% (KOH) or to 14% (t-BuOK).     

Short-range interactions within molecular complexes formed in supersonic beams: structural effects and chiral discrimination

One- and two-color, mass-selected R2PI spectra of the S1<--S0 transitions in the bare chiral chromophore R-(+)-1-phenyl-1-propanol (R) and its complexes with a variety of alcoholic solvent molecules (solv), namely methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, S-(+)-2-butanol, R-(-)-2-butanol, 1-pentanol, S-(+)-2-pentanol, R-(-)-2-pentanol, and 3-pentanol, were recorded after a supersonic molecular beam expansion. Spectral analysis, coupled with theoretical calculations, indicate that several hydrogen-bonded [R.solv] conformers are present in the beam. The R2PI excitation spectra of [R.solv] are characterized by significant shifts of their band origin relative to that of bare R. The extent and direction of these spectral shifts depend on the structure and configuration of solv and are attributed to different short-range interactions in the ground and excited [R.solv] complexes. Measurement of the binding energies of [R.solv] in their neutral and ionic states points to a subtle balance between attractive (electrostatic and dispersive) and repulsive (steric) forces, which control the spectral features of the complexes and allow enantiomeric discrimination of chiral solv molecules.     

Isothermal vapour–liquid equilibrium for cyclic ethers with 1-chloropentane

Isothermal vapour–liquid equilibrium measurements for mixtures containing cyclic ethers: tetrahydrofuran, tetrahydropyran, 1,3-dioxolane or 1,4-dioxane and 1-chloropentane at the temperatures of 298.15, 313.15 and 328.15 K are reported. The thermodynamic consistency of the VLE measurements was satisfactorily checked with the van Ness method. Activity coefficients were correlated with Wilson, NRTL, and UNIQUAC equations. The calculated excess Gibbs functions for tetrahydrofuran and tetrahydropyran are negative over the whole composition range while for 1,3-dioxolane and 1,4-dioxane the excess Gibbs functions are positive.     

Solubility of phenobarbital in aqueous cosolvent mixtures revisited: IKBI preferential solvation analysis

The preferential solvation parameters of phenobarbital in aqueous binary mixtures of 1,4-dioxane, t-butanol, n-propanol, ethanol, propylene glycol and glycerol were derived from solution thermodynamic properties by using the IKBI method. This drug is sensitive to preferential solvation effects in all these mixtures. The preferential solvation parameter by the cosolvent (δx_1,3) is negative in almost all the water-rich mixtures but positive in mixtures with similar proportions of solvents and cosolvent-rich mixtures, except in 1-propanol + water mixtures, where negative values are also found in mixtures with x₁ ≥ 0.70. Hydrophobic hydration around the non-polar ethyl and phenyl groups of this drug in water-rich mixtures could play a relevant role in drug solvation. Otherwise, in mixtures of similar solvent compositions and in cosolvent-rich mixtures the preferential solvation by cosolvent could be due to the acidic behaviour of the drug.     

Excess Molar Volumes,Viscosity Deviations and Isentropic Compressibility of Binary Mixtures Containing 1,3-Dioxolane and Monoalcohols at 303.15 K

The excess molar volume (V ^E), viscosity deviations (Δη) and Gibbs excess energy of activation for viscous flow (G^∗E) have been investigated from density (ρ) and viscosity (η) measurements of eight binary mixtures of 1,3-dioxolane with methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, 2-butanol, t-butanol, and i-amyl alcohol over the entire range of mole fractions at 303.15 K. The viscosity data have been correlated with the Grunberg and Nissan equation. Furthermore, excess isentropic compressibilities (K_S^E) have been calculated from ultrasonic speed measurements of these binary mixtures at 303.15 K. The deviations have been fitted by a Redlich–Kister equation and the results are discussed in terms of molecular interactions and structural effects. The excess properties are found to be either negative or positive depending on the molecular interactions and the nature of the liquid mixtures. The systems studied exhibit very strong cross association through hydrogen bonding.     

Isobaric (vapour + liquid) equilibrium of (1,3-dioxolane,or 1,4-dioxane + 1-butanol,or 2-butanol) at 40.0 kPa and 101.3 kPa

Isobaric (vapour  +  liquid) equilibrium (v.l.e.) of (1,3-dioxolane, or 1,4-dioxane  +  1-butanol, or 2-butanol) at 40.0 kPa and 101.3 kPa have been studied with a dynamic recirculating still. The experimental data for all mixtures were checked for thermodynamic consistency using the method of Van Ness. Activity coefficients calculated from (v.l.e.) data have been correlated with different equations (Wilson, Van Laar, Margulles, NRTL, and UNIQUAC), giving satisfactory results. Predictions with the group contribution methods ASOG and UNIFAC were also obtained.     

Effect of intramolecular cyclization on the enthalpies of solvation of tetramethylurea in water and alkanols at 298.15 K

The enthalpies of solution of N,N′-dimethylethyleneurea (1,3-dimethyl-2-imidazolidinone) in water, methanol, ethanol, 1-propanol, 2-propanol, 1-butanol, and t-butanol (2-methyl-2-propanol) were measured calorimetrically at 298.15 K. For comparison purposes, the previous data on enthalpic effects of 1,1,3,3-tetramethylurea dissolution (solvation) in the same solvents were analyzed. It has been concluded that the intramolecular cyclization of tetramethylurea, to form dimethylethyleneurea, results in strengthening of the solute solvation and this tendency is more pronounced in a non-aqueous (alcoholic) medium.     

Relative reactivities of cyclic ketene acetals via cationic 1,2-vinyl addition copolymerization1

The relationship between the relative reactivities of ten cyclic ketene acetals and their structures was determined via cationic copolymerizations of eight different monomer pairs. Thus, 2-methylene-1,3-dioxolane (1) was copolymerized with 2-methylene-4-methyl-1,3-dioxolane (2), 2-methylene-4,5-dimethyl-1,3-dioxolane (3), 2-methylene-4,4,5,5-tetramethyl-1,3-dioxolane (4), 2-methylene-4-phenyl-1,3-dioxolane (5), and 2-methylene-4-(t-butyl)-1,3-dioxolane (6). Also 2-methylene-1,3-dioxane (7) was copolymerized with 2-methylene-4-methyl-1,3-dioxane (8), 2-methylene-4,4,6-trimethyl-1,3-dioxane (9), and 2-methylene-4-isopropyl-5,5-dimethyl-1,3-dioxane (10). The relative reactivities of these monomers are: 3 > 5 > 4 > 2 > 1 > 6; and 10 > 9 > 8 > 7. In spite of steric demands, substituents at the 4- or 5-positions in 2-methylene-1,3-dioxolane and substituents at the 4- or 6-positions in 2-methylene-1,3-dioxane serve to increase the copolymerization reactivity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2841–2852, 1999     

Oxidation of 1,3-Dioxacyclanes with Oxone and Potassium Persulfate Catalyzed by 2,2,5,5-Tetramethyl-4-Phenyl-3-Imidazoline-3-Oxide-1-Oxyl

The catalytic effect of 2,2,5,5-tetramethyl-4-phenyl-3-imidazoline-3-oxide-1-oxyl on the oxidation of 2-isopropyl-1,3-dioxolane, 2-phenyl-1,3-dioxolane, 2-phenyl-4-chlormethyl-1,3-dioxolane, 2-isopropyl-1,3-dioxane, 2-isopropyl-4-methyl-1,3-dioxane, 2-phenyl-1,3-dioxane, 2-phenyl-4-methyl-1,3-dioxane with oxone and potassium persulfate is reported. The corresponding glycol monoesters were obtained with yields of 90-100%.     

Surface tension of binary mixtures of imidazolium and ammonium based ionic liquids with alcohols, or water: cation, anion effect

The surface tensions were measured at atmospheric pressure, with use of a ring tensiometer, of a series of alcoholic solutions of closely related ionic liquids: 1-methyl-3-methylimidazolium methylsulfate, [MMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium methylsulfate, [BMIM][CH3SO4] in alcohol (methanol, or ethanol, or 1-butanol at 298.15 K), 1-butyl-3-methylimidazolium octylsulfate, [BMIM][OcSO4] in alcohol (methanol, or 1-butanol at 298.15 K) and of 1-hexyloxymethyl-3-methylimidazolium tetrafluoroborate, [C6H(13)OCH2MIM][BF4], 1,3-dihexyloxymethylimidazolium tetrafluoroborate, [(C6H13OCH2)2IM][BF4] in alcohol (methanol, or 1-butanol, or 1-hexanol at 308.15 and 318.5 K) and hexyl(2-hydroxyethyl)dimethylammonium bromide, C6Br in 1-octanol at 298.15 K. The set of ammonium ionic liquids of different cations and anions (C2Br, C2BF4, C2PF6, C2N(CN)2, C3Br, C4Br and C6Br) was chosen to show the influence of small amount of the ammonium ionic liquid on the surface tension of water at 298.15 K. The influence of the cation, or anion alkyl chain length on the properties under study (densities and surface tension) was tested.     

Catalyst activity comparison of alcohols over zeolites

Alcohol transformation to transportation fuel-range hydrocarbon over HZSM-5 (SiO₂/Al₂O₃ = 30) catalyst was studied at 360 °C and 300 psig. Product distributions and catalyst life were compared between methanol, ethanol, 1-propanol and 1-butanol as a feed. The catalyst life for 1-propanol and 1-butanol was more than double compared with that for methanol and ethanol. For all the alcohols studied, the product distributions (classified to paraffin, olefin, naphthene, aromatic and naphthalene compounds) varied with time on stream (TOS). At 24 h TOS, liquid product from 1-propanol and 1-butanol transformation primarily contains higher olefin compounds. The alcohol transformation process to higher hydrocarbon involves a complex set of reaction pathways such as dehydration, oligomerization, dehydrocyclization and hydrogenation. Compared with ethylene generated from methanol and ethanol, oligomerization of propylene and butylene has a lower activation energy and can readily take place on weaker acidic sites. On the other hand, dehydrocyclization of the oligomerized products of propylene and butylene to form the cyclic compounds requires the sites with stronger acid strength. Combination of the above mentioned reasons are the primary reasons for olefin rich product generated in the later stage of the time on stream and for the extended catalyst life time for 1-propanol and 1-butanol compared with methanol and ethanol conversion over HZSM-5.     

Synthesis of alkyl glycosides from cyclodextrin using cyclodextrin glycosyltransferase from Paenibacillus sp. RB01

Alkyl glycosides have potential use as biodegradable detergents due to their high surface activity with low toxicity. Recent progress in the application of enzymes to the preparation of these surface-active compounds demonstrates the advantages to the chemical synthesis. In this work, alkyl glycosides were, for the first time, synthesized from cyclodextrin (CD) and various soluble alcohols by transglycosylation reaction using cyclodextrin glycosyltransferase (CGTase) from Paenibacillus sp. RB01. Several alcohols (methanol, ethanol, 1-propanol, 2-propanol, 1-butanol and 2-butanol) as glycosyl-acceptor substrates were evaluated. It was found that the reaction products which were analyzed by TLC were maximum for 30% methanol, 20?C30% ethanol, 10?C20% 1-propanol, 10% 2-propanol, 8% 1-butanol and 5?C10% 2-butanol. In addition, the increase in the yield of alkyl glycoside formation was achieved by using methanol as an acceptor. Optimal reaction conditions for methyl glycoside synthesis from CD were to incubate 1.2% (w/v) ??-CD and 240 U/mL of CGTase in a water/methanol system containing 30% (v/v) methanol, pH 6.0 and a temperature of 40???C. At least three main methyl glycoside products were formed having 1?C3 monosaccharide units attached to methanol which were in accordance with the results of MS analysis.     

Reactions of [CH3]+ and [CD3]+ with alcohols

The reactions of [CH₃]⁺ and [CD₃]⁺ with a number of C₁ to C₅ alcohols were studied at approximately thermal energies (0.1 eV) using a tandem Dempster ion cyclotron resonance mass spectrometer. Branching ratios obtained under single collision conditions are reported for [CH₃]⁺ and [CD₃]⁺ with methanol, perdeutero methanol, ethanol, allyl alcohol, 1-propanol, 2-propanol, perdeutero-2-propanol, 1-butanol, 2-butanol, t-butanol, cyclopentanol and 1-pentanol. The results are examined in terms of the mechanism of reactions and indicate that upon progression to larger alcohols, the formation of a long-lived adduct becomes less important in determining the reaction products.