Theoretical investigations on KClxBr1−x, KClxI1−x and KBrxI1−x: A first-principles study

Using first-principles total energy calculations within the full-potential linearized augmented plane wave (FP-LAPW) method, we have investigated the structural, electronic and thermodynamic properties of potassium halides (KCl_xBr_1−x, KCl_xI_1−x and KBr_xI_1−x), with x concentrations varying from 0% up to 100%. The effect of composition on lattice constants, bulk modulus, band gap and dielectric function was investigated. Deviations of the lattice constants from Vegard's law and the bulk modulus from linear concentration dependence (LCD) were observed for the three alloys. The microscopic origins of the gap bowing were explained by using the approach of Zunger and coworkers. On the other hand, the thermodynamic stability of these alloys was investigated by calculating the excess enthalpy of mixing ΔH_m as well as the phase diagram.     

First-principles calculations on the origins of the gap bowing in InAs1-xPx alloys

We perform self-consistent ab-initio calculations to study the structural, electronic and thermodynamic properties of InAs_1-xP_x alloy. The full potential-linearized augmented plane wave (FP-LAPW) method was employed within density functional theory (DFT). The ground-state properties are determined for the bulk materials (InAs and InP) as well as for the different concentration of their alloys. Deviations of the lattice constants from Vegard's law and the bulk modulus from linear concentration dependence (LCD) were observed. The microscopic origins of the gap bowing were explained by using the approach of Zunger and co-workers. The gap bowing for the alloy of interest was found to be mainly caused by the charge-exchange contributions. In addition, the thermodynamic stability of InAs_1-xP_x alloy was investigated by calculating the excess enthalpy of mixing ΔH_m and the calculated phase diagram showed a broad miscibility gap with a high critical temperature.     

Superconductivity in the hole-doped oxy-arsenide RE1−xSrxFeAsO (RE = La, Pr)

Bulk superconductivity was observed in the FeAs-based RE_1−xSr_xFeAsO (RE = La, Pr) when the di-valence element Sr was substituted to the site of the tri-valence element La and Pr. The maximum superconducting transition temperatures T_c for the two systems are 26 K and 16.3 K, respectively. The doping dependence of the electrical properties and structure of these two systems were investigated systematically. A roughly monotonic increase of T_c and the lattice constants (a-axis and c-axis) with Sr concentration and a saturation behavior in the high doping levels were found. We confirmed that conduction in this type of materials is dominated by hole-like charge carriers by the Hall effect measurements. Also the resistive measurements revealed possible higher upper critical field in these systems comparing with the electron-doped ones.     

Temperature dependence of the indirect band gap, steepness parameter and related optical constants of [Kx(NH4)1−x]2ZnCl4 mixed crystals

Optical transmittance measurements near the absorption edge of [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals, where x=0.00, 0.232, 0.522, 0.644, 0.859 and 1.00, are reported over 276–350 K range. Analysis reveals that the type of transition is the indirect allowed one. The absorption edge shifted towards lower energy with increasing temperature. It is shown that [K_x(NH₄)_1−x]₂ZnCl₄ mixed crystals with x0.644 reveal a phase transition at 319 K, this phase disappeared at high concentrations of K⁺ ions. The steepness parameter is given, its value is used to estimate the temperature dependence of the indirect energy gap. In the region of the absorption edge, the absorption coefficient obeys Urbach's rule. Urbach parameters are investigated as a function of temperature.     

Be-composition effect on structure, electronic and optical properties of BexZn1-xO alloys

This paper carries out first principles calculation of the structure,electronic and optical properties of Be x Zn 1 x O alloys based on the density-functional theory for the compositions x = 0.0,0.25,0.5,0.75,1.0.The lattice constants deviations of alloys obey Vegard’s law well.The Be x Zn 1 x O alloys have the direct band gap(Γ-Γ) character,and the bowing coefficients are less than the available theoretical values.Moreover,it investigates in detail the optical properties(dielectric functions,absorption spectrum and refractive index) of these ternary mixed crystals.The obtained results agree well with the available theoretical and experimental values.     

First-principles calculations of the optical band-gaps of ZnxCd1−xO alloys

Using first-principles calculations, we investigated the structural and electronic properties of two binaries: ZnO in wurtzite structure and CdO in wurtzite and rock-salt structures. In addition several compositions with various ordered structures of Zn_xCd_1−xO alloys were studied within the theory of order–disorder transformation. The full potential linearized augmented plane wave method was used and the d orbitals of Zn and Cd were included in the valence bands. In this investigation of alloying ZnO with CdO, the fundamental band-gap of the alloys is shown to be direct and to decrease versus the Cd composition.     

First-principles study of fundamental properties and electronic structure of alloys

We have performed first-principles calculations using full-potential augmented-plane-wave method to investigate the fundamental properties of the Cd_1–xZn_xTe alloys. The composition dependence of the lattice constant and the bulk modulus have been estimated from total energy calculations. By means of the analytical fitting the band structures in the vicinity of the Brillouin center a complete set of effective electron- and hole-masses have also been derived. In order to further understand the effects of the chemical bonding on the above macroscopic properties we then studied the relaxation behaviors and the changes of the electronic states upon alloying for x=0.25 system. The results presented here yield a general understanding of the fundamental properties for the Cd_1–xZn_xTe crystals studies.     

Theoretical study of CuxAg1−xI alloys

We have performed first-principles calculations using full potential linearized augmented plane wave (FP-LAPW) method within density functional theory (DFT) to investigate the fundamental properties of Cu_xAg_1−xI alloys. We used both GGA96 [J.P. Perdew, K. Burke, M. Ernzerhof, Phys. Rev. Lett. 77 (1996) 3865.] and EVGGA [E. Engel, S.H. Vosko, Phys. Rev. B. 47 (1993) 13164.] generalized gradient approximations of the exchange-correlation energy that are based on the optimization of total energy and corresponding potential. Quantities such as lattice constants, bulk modulus, band gap, density of occupied states and effective mass were calculated as a function of copper molar fraction x. These parameters were found to depend non-linearly on alloy composition x, except the lattice parameter, which follows Vegard's law. The microscopic origins of the gap bowing were explained using the approach of Zunger and co-workers; we have concluded that the band-gap energy bowing was mainly caused by the chemical charge-transfer effect and the volume deformation , while the structural relaxation contribute to the gap bowing parameter at smaller magnitude. The calculated phase diagram shows a broad miscibility gap for this alloy with a high critical temperature.     

Synthesis, characterization and melt processing of Y1−x(Yb0.9Nd0.1)xBa2Cu3Oz superconductors

Effects of a combined substitute of Yb and Nd on Y site on the superconducting properties of YBa₂Cu₃O_y have been studied. We synthesized Y_1−x(Yb_0.9Nd_0.1)_xBa₂Cu₃O_z compound with x = 0.2, 0.4, 0.6, 0.8 and 1.0. Here, the ratio of Yb–Nd was fixed to be 9:1 for obtaining 123 phase without secondary phases. The melt processing thermal profiles for Y_1−x(Yb_0.9Nd_0.1)_xBa₂Cu₃O_z with x = 0.2 and 0.4 and the addition of 40 mol% {Y_1−x(Yb_0.9Nd_0.1)_x}₂BaCuO₅ and 0.5 wt% Pt in air were determined on the basis of the thermal analysis results. All samples showed a low grain growth rate, particularly for high x values, which may be partially ascribed to un-optimized thermal schedules. Although almost all the samples exhibited low J_c values, the sample with x = 0.2 exhibited T_c of 88.8 K and a relatively high J_c value of 16,000 A/cm² at 77 K for H//c-axis.     

Structural and optical properties of Ba(Ti1−x,Nix)O3 thin films prepared by sol–gel process

Ba(Ti_1−x,Ni_x)O₃ thin films were prepared on fused quartz substrates by a sol–gel process. X-ray diffraction and Raman scattering measurements showed that the films are of pseudo-cubic perovskite structure with random orientation and the change of lattice constant caused by Ni-doping with different concentrations is very small. Optical transmittance spectra indicated that Ni-doping has an obvious effect on the energy band structure. The energy gap of Ba(Ti_1−x,Ni_x)O₃ decreased linearly with the increase of Ni concentration. It indicates that the adjusting of band gap can be achieved by controlling the Ni-doping content accurately in Ba(Ti_1−x,Ni_x)O₃ thin films. This has potential application in devices based on ferroelectric thin films.     

Scanning tunneling microscopy/spectroscopy on multi-layered cuprate superconductor Ba2Ca5Cu6O12 (O1−x Fx)2

Scanning tunneling microscopy/spectroscopy (STM/STS) measurements on multi-layered cuprate superconductor Ba₂Ca₅Cu₆O₁₂ (O_1−x F_x)₂ are carried out. STM topographies show randomly distributed bright spot structures with a typical spot size of 0.8 nm. These bright spots are occupied about 28% per one unit cell of c-plane, which is comparable to the regular amount of apical oxygen of 20% obtained from element analysis. Tunneling spectra simultaneously show both the small and the large gap structures. These gap sizes at 4.9 K are about Δ 15 meV and 90 meV, respectively. The small gap structure disappears at the temperature close to T_C, while the large gap persists up to 200 K. Therefore, these features correspond to the superconducting gap and pseudogap, respectively. These facts give evidence for some ordered state with large energy scale even in the superconducting state. For the superconducting gap, the ratio of 2Δ/K_BT_C = 4.9 is obtained with T_C = 70 K, which is determined from temperature dependence of the tunneling spectra.     

The experimental and theoretical investigation of vibration spectra in ferroelectric semiconductor SbSBrxI1−x crystals

The vapor grown SbSBr_xI_1−x (x=0.1; 0.5; 0.9) crystals with clear mirror surfaces have been used for infrared reflection measurements with Fourier spectrometer. The vibration frequencies along c(z)-axis have been derived from Kramers–Kroning and optical parameters fitting analysis of the experimental reflectivity spectra at T=300 K. The theoretical vibration spectra of SbSBr_xS_1−x (x=0.1; 0.5; 0.9) crystals in paraelectric phase (T=300 K) along c(z)-axis have been determined in quasiharmonic approximation by diagonalization of dynamical matrix. The theoretical vibration spectra of these crystals in a–b(x−y) plane have been determined in harmonic approximation. In this work we discuss the nature of anharmonism in SbSBr_xI_1−x crystals along the c(z)-axis.     

Ab initio investigation of phase separation in Ca1−xZnxO alloys

First-principles study of the ground-state properties and the stability of Ca_1−xZn_xO solid solutions is presented using the full-potential linearized augmented plane wave (FP-LAPW) method. We employed the local density approximation (LDA) to the exchange-correlation potential. It is found that the structural parameters, i.e., lattice constants and bulk moduli deviate from the linear function of the composition x. We determined the equation of state of the alloys and showed an increasing compressibility function of composition. The formation energy is viewed as an energetic balance between pure structural constraints and quantum chemical effects. Thus, a phase separation over the whole range of concentration is expected. The origin of the miscibility gap has a chemical nature. Also, the thermodynamic stability of the alloys was investigated.     

Si-nanostructures formation in amorphous silicon nitride SiNx:H deposited by remote PECVD

The formation of silicon nanoclusters embedded in amorphous silicon nitride (SiN_x:H) can be of great interest for optoelectronic devices such as solar cells. Here amorphous SiN_x:H layers have been deposited by remote microwave-assisted chemical vapor deposition at 300 °C substrate temperature and with different ammonia [NH₃]/silane [SiH₄] gas flow ratios (R=0.5−5). Post-thermal annealing was carried out at 700 °C during 30 min to form the silicon nanoclusters. The composition of the layers was determined by Rutherford back scattering (RBS) and elastic recoil detection analysis (ERDA). Fourier transform infrared spectroscopy (FTIR) showed that the densities of SiH (2160 cm⁻¹) and NH (3330 cm⁻¹) molecules are reduced after thermal annealing for SiN:H films deposited at flow gas ratio R>1.5. Breaking the SiH bonding provide Si atoms in excess in the bulk of the layer, which can nucleate and form Si nanostructures. The analysis of the photoluminescence (PL) spectra for different stoichiometric layers showed a strong dependence of the peak characteristics (position, intensity, etc.) on the gas flow ratio. On the other hand, transmission electron microscopy (TEM) analysis proves the presence of silicon nanoclusters embedded in the films deposited at a gas flow ratio of R=2 and annealed at 700 °C (30 min).     

Conversion of egg shell membrane to inorganic porous CexZr1−xO2 fibrous network

The binary system CeO₂–ZrO₂ is thermally stable and has superior reduction–oxidation properties. It has been commonly used in the three-way catalytic converters for automobiles. In this work, an inorganic biomorphic porous Ce_xZr_1−xO₂ fibrous network was successfully synthesized by using the egg shell membrane (ESM) as templates, and its morphology was a perfect replica of the original ESM. The synthesis involved a simple infiltration and calcination process. A fresh ESM was peeled from a chicken egg shell. It was soaked in a Ce(NO₃)₃ and Zr(NO₃)₄ mixture before it was calcined at 700 °C in ambient environment. The fibers in the biomorphic network had diameter ranged from 1 to 4 μm, and they were composed of Ce_xZr_1−xO₂ nanocrystallites having an average grain size of 10 nm.     

Optical and physical properties of different composition of InxSe1−x thin films

Thin film binary alloys of In_xSe_1−x (0.05?x?0.30) have been prepared by the thermal evaporation technique. The optical transmission and reflection spectrum of these films were measured in the range 300-1100 nm. Both refractive index, n and extinction coefficient k have been determined from transmission and reflection measurements in terms of Murmann's equations. The dispersion of the refractive index is discussed in terms of the single-oscillator Wemple-DiDomenico model. The width of band tail is determined and the optical absorption edge is described using the ‘non-direct transition’ model proposed by Tauc. Finally, the relationship between the optical gap and chemical composition in In_xSe_1−x amorphous system is discussed in terms of the average heat of atomization H_s and average coordination number N_c. The results of these calculations can be used rationalize the observed optical properties of these materials. Finally, the chemical bond approach has been also applied to interpret the decrease of the glass optical gap with increasing In content.     

纤锌矿BexZn1-xO合金能隙弯曲系数的第一原理研究

采用密度泛函理论框架下的第一性原理平面波超软赝势方法, 对纤锌矿Be_xZn_1-xO合金进行能隙特性、弯曲系数和结构参数的计算. 结果表明: Be_xZn_1-xO合金的能隙和弯曲系数都随Be掺杂组分的增大而增大. 通过修正Be_xZn_1-xO合金的能隙值得知其合金弯曲系数b为6.02 eV, 这与实验值接近. 纤锌矿Be_xZn_1-xO合金的能隙弯曲系数过大主要来源于体积形变和电荷转移的贡献. 文中还分析了Be_xZn_1-xO合金的晶格常数、 平均键长和平均次近邻原子距离与Be组分的关系.     

The structural and magnetic properties of Ni2Mn1−xBxGa Heusler alloys

The influence of the substitution of manganese by boron on the crystal structure and magnetic properties of Ni₂Mn_1−xB_xGa Heusler alloys with 0?x?0.5 has been investigated using X-ray diffraction, thermal expansion, resistivity, and magnetization measurements. The samples with concentrations x<0.25 were found to be of single phase and belonged to the cubic L2₁ crystal structure at room temperature. Crystal cell parameters of the alloys decreased from 5.830 to 5.825 Å with increasing boron concentration (x) from 0 to 0.25. The alloys were ferromagnetically ordered at 5 K and the saturation magnetization decreased with increasing boron concentration. The ferromagnetic ordering and structural transition temperatures for 0?x?0.3 have been observed and the phase (x−T) diagram of the Ni₂Mn_1−xB_xGa system was constructed. The phase (x−T) diagram indicates that the ground state of Ni₂Mn_1−xB_xGa alloys belongs to ferromagnetic martensitic, premartensitic, and austenitic phases in x?0.12, 0.12<x?0.18, and 0.18<x?0.3, respectively. The relative influence of cell parameters and electron concentrations on the phase diagram is discussed.     

Structure and magnetostriction of Tb0.2Pr0.8(Fe0.4Co0.6)1.93−xCx intermetallic compounds

The structure and magnetostriction of Tb_0.2Pr_0.8(Fe_0.4Co_0.6)_1.93−xC_x intermetallic compounds were studied by X-ray diffraction and magnetic measurements. Almost a single cubic Laves phase forms in the alloys for x ≤0.20, and a small amount of C can inhibit the formation of the 1:3 phase. The lattice parameter increases when 0≤x≤0.15, while the T_c and the spontaneous magnetization decreases with increasing x. The lattice parameter decreases slowly when 0.15≤x≤0.30, while the T_c decreases evidently with increasing x. The magnetostriction λ_a (=λ_∥-λ_⊥) is improved at low magnetic fields at room temperature for the compounds with 0.05≤x≤0.10, indicating that these C-containing compounds are promising magnetostrictive materials.     

First-principles calculations of structural,electronic and thermal properties of Zn1−x Mg x S ternary alloys

Structural, electronic and thermal properties of Zn_1?x Mg _x S ternary alloys are studied by using the full potential-linearized augmented plane wave method (FP-LAPW) within the density functional theory (DFT). The Wu-Cohen generalized gradient approximation (WC-GGA) is used in this approach for the exchangecorrelation potential. Moreover, the modified Becke-Johnson approximation (mBJ) is adopted for band structure calculations. The dependence of the lattice constant, bulk modulus and band gap on the composition x showed that the first exhibits a small deviation from the Vegard’s law, whereas, a marginal deviation of the second from linear concentration dependence (LCD). The bowing of the fundamental gap versus composition predicted by our calculations agrees well with the available theoretical data. The microscopic origins of the gap bowing are explained by using the approach of Zunger and co-workers. Thermal effects on some macroscopic properties of Zn_1?x Mg _x S alloys are also investigated using the quasi-harmonic Debye model, in which the phononic effects are considered. As, this is the first quantitative theoretical prediction of the thermal properties of Zn_1?x Mg _x S alloys, no other calculated results and furthermore no experimental studies are available for comparison.