Topotactic insertion of lithium in the layered structure Li4VO(PO4)2: The tunnel structure Li5VO(PO4)2

A new V(III) lithium phosphate Li₅VO(PO₄)₂ has been synthesized by electrochemical insertion of lithium into Li₄VO(PO₄)₂. This phase, which crystallizes in the space group I4/mcm, exhibits a tunnel structure closely related to the layered structure of Li₄VO(PO₄)₂ and to the tunnel structure of VO(H₂PO₄)₂. The topotactic reactions that take place during lithium exchange and intercalation, starting from VO(H₂PO₄)₂ and going to the final phase Li₅VO(PO₄)₂ are explained on the basis of the flexible coordinations of V⁴⁺ and V³⁺ species. The electrochemical and magnetic properties of this new phase are also presented and explained on the basis of the structure dimensionality.     

Influence of several factors on potential-modulated DNA cleavage by the Cu(en)2 and Cu(EDTA) complexes

Potential-modulated DNA cleavage in the presence of copper–ethylenediamine (en) and –ethylenediamine tetraacetic acid (EDTA) complexes was investigated at a gold electrode in a thin layer cell. DNA can be efficiently cleaved through production of active oxygen species at −0.50 V (vs. Ag/AgCl/KCl(sat)) by reducing Cu(en)₂²⁺ to Cu(en)₂⁺ or Cu(EDTA)²⁻ to Cu(EDTA)³⁻. The extent of DNA cleavage increased as the working potential was shifted more negative and the electrolysis time was increased in air-saturated solution. When a small flow of O₂ was passed through the solution during electrolysis, the extent of DNA cleavage was dramatically enhanced. In the absence of Cu(en)₂²⁺ or Cu(EDTA)²⁻ complex, slight DNA cleavage was observed at a more negative working potential due to the reduction of oxygen at the electrode. This observation suggests that potential-modulated DNA cleavage was caused mainly by electrochemical reduction of the Cu(en)₂²⁺ or Cu(EDTA)²⁻ complex in the presence of oxygen. The cleaved DNA fragments were separated by high performance liquid chromatography (HPLC). The experimental results proved that this method of potential-modulated DNA cleavage by Cu(en)₂²⁺ and Cu(EDTA)²⁻ complexes is simple, mild and highly efficient.     

Conductance Studies on Complex Formation Between Aza-18-Crown-6 with Ag+, Hg2+ and Pb2+ Cations in DMSO–H2O Binary Solutions

The complexation reactions between Ag⁺, Hg²⁺ and Pb²⁺ metal cations with aza-18-crown-6 (A18C6) were studied in dimethylsulfoxide (DMSO)–water (H₂O) binary mixtures at different temperatures using the conductometric method. The conductance data show that the stoichiometry of the complexes in most cases is 1:1(ML), but in some cases 1:2 (ML₂) complexes are formed in solutions. A non-linear behaviour was observed for the variation of log K _f of the complexes vs. the composition of the binary mixed solvents. Selectivity of A18C6 for Ag⁺, Hg²⁺ and Pb²⁺ cations is sensitive to the solvent composition and in some cases and in certain compositions of the mixed solvent systems, the selectivity order is changed. The values of thermodynamic parameters (ΔH _c^o, ΔS _c^o) for formation of A18C6–Ag⁺, A18C6–Hg²⁺ and A18C6–Pb²⁺ complexes in DMSO–H₂O binary systems were obtained from temperature dependence of stability constants and the results show that the thermodynamics of complexation reactions is affected by the nature and composition of the mixed solvents.     

Studies on the effects of coated Li2CO3 on lithium electrode

Although a lithium metal anode has a high energy density compared with a carbon insertion anode, the poor rechargeability prevents the practical use of anode materials. A lithium electrode coated with Li₂CO₃ was prepared as a negative electrode to enhance cycleability through the control of the solid electrolyte interface (SEI) layer formation in Li secondary batteries. The electrochemical characteristics of the SEI layer were examined using chronopotentiometry (CP) and impedance spectroscopy. The Li₂CO₃-SEI layer prevents electrolyte decomposition reaction and has low interface resistance. In addition, the lithium ion diffusion in the SEI layer of the uncoated and the Li₂CO₃-coated electrode was evaluated using chronoamperometry (CA).     

层状Li(Ni1-xCox)O2结构研究

0引言层状钴酸锂是目前锂离子电池主要正极材料,但是,随着锂离子电池的广泛使用,急需比钴酸锂价格低和来源广泛的正极材料,层状锰酸锂和层状镍酸锂受到重视。由于锰氧化物存在有J-T效应,因此,严格意义上的层状锰酸锂的制备极其困难。制备层状镍酸锂也非常困难,高温反应极易生成Li1-xNi1 xO2,具有此种结构的镍酸锂存在严重首次能量衰减和循环性能下降的缺点。采用其他元素掺杂镍酸锂克服其缺点的研究已经很多,其中钴掺杂镍酸锂由于显示了良好的效果而被认为是最有希望替代钴酸锂的锂离子电池正极材料。有关层状镍钴酸锂的研究很多,但不少的…     

New 1,2-dithioether based 2D copper(I) coordination polymer: from synthesis to catalytic application in A3-coupling reaction

Abstract

A new 2D copper(I) coordination polymeric complex has been synthesized from CuI and 1-(1-{4-chlorophenylthio}propan-2-ylthio)-4-chlorobenzene ([(CuI)₂{ArSCH₂CH(CH₃)SAr}₂]_n, Ar = 4-ClC₆H₄) and characterized by high resolution mass spectrometry (HRMS) and single crystal X-ray diffraction techniques. The complex has been employed as a suitable catalyst for a solvent-free, one-pot, three-component A³-coupling reaction. A variety of aromatic and aliphatic aldehydes, terminal alkynes and aliphatic cyclic secondary amines have been used to prepare a library of propargylamines using the 2D-Cu complex at significantly low concentration (0.2?mol%).     

5-Methyl-2-furylglyoxal, 5-Methyl-4-nitro-2-furylglyoxal, and Their Derivatives. Nitration of 2-(5-Methyl-2-furyl)quinoxaline

The oxidation of 2-acetyl-5-methyl-4-R-furans (R = H, NO₂) by selenious acid was studied. Derivatives substituted at the C=O groups of the corresponding glyoxals were obtained. The nitration of 2-(5-methyl-2-furyl)quinoxaline was carried out at C_(4'). Oxidative splitting of the -nitrofuryl group occurs at the C₍₄₎-C₍₅₎ and C₍₅₎-O bonds.     

New organogermanium cations [RGe(OCH2CH2NME2)2]+ with intramolecular N→Ge coordination bonds

New organohalogermanes RGe(OCH₂CH₂NMe₂)₂X (R = Ph, X = I (5); R = Me, X = Cl (6) or I (7)) with an intramolecular N→Ge coordination bond were synthesized. According to the ¹H and ¹³C NMR spectroscopic data, iodides 5 and 7 exist in solution as ionic compounds with the pentacoordinated germanium atom. In solution of compound 4 (R = Ph, X = Cl), there is an equilibrium between the ionic and covalent forms. The equilibrium shifts toward the ionic form with increasing solvent polarity or temperature. In solution, chloride 6 is a covalent compound. The structures and relative stabilities of different isomers of compounds 4–7 were studied by quantum chemical calculations at the density functional level of theory. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 892–900, May, 2007.     

Reaction of CpCo(PPh3)2 with diphenylphosphinoalkynes: Syntheses and X-ray structures of 1,3-cyclobutadiene-substituted CpCoCb diphosphine and 2,5-cobaltacyclopentadiene diphosphine dioxide

A potentially bidentate cobalt-containing phosphine ligand, [(η⁵-C₅H₅)Co(η⁴-1,3-(PPh₂)₂C₄Ph₂)] (trans-1), was prepared from the reaction between PhCCPPh₂ and CpCo(PPh₃)₂ obtained in situ from CoCl(PPh₃)₃ and NaCp. The cobaltacycle [(η⁵-C₅H₅)(PPh₃)Co(2,5-(PPh₂)₂C₄H₂)] (2) was prepared from the reaction of CpCo(PPh₃)₂ with HCCPPh₂. An oxidized product [(η⁵-C₅H₅)(PPh₃)Co(2,5-(P(O)Ph₂)₂C₄H₂)] (4), was obtained upon the attempted isolation of 2 using CTLC. Both 2 and 4 failed to produce [(η⁵-C₅H₅)Co(η⁴-1,2-(PPh₂)₂C₄H₂)] or its oxidized analog, respectively, upon thermal activation. The performance of phosphine 1 in the Suzuki coupling of several aryl chlorides with phenylboronic acid in the presence of Pd(OAc)₂ was evaluated.     

Cobalt(II), nickel(II) and zinc(II) coordination compounds derived from aromatic amines

The structural and spectroscopic characterization of coordination compounds of four aromatic amines derived from benzimidazole, 2-aminobenzimidazole (L1), 1-(S-methylcarbodithioate)-2-aminobenzimidazole (L2), 2-(2-aminophenyl)-1H-benzimidazole (L3) and 6,6-dimethyl-5H-benzimidazolyl[1,2-c]quinazoline (L4) are reported. Cobalt(II) [Co(L1)₂(CH₃COO)₂] (1) and nickel(II) [Ni(L1)₂(CH₃COO)₂] (2) acetate coordination compounds of L1 are discussed. The synthesis and the X-ray crystal structure of the new 1-(S-methylcarbodithioate)-2-aminobenzimidazole (L2) is informed, together with its cobalt(II) [Co(L2)₂Cl₂] (3), [Co(L2)₂Br₂] (4) and zinc(II) [Co(L2)₂Cl₂] (5), [Zn(L2)₂Br₂] (6) coordination compounds. In these compounds the imidazolic nitrogen is coordinated to the metal center, while the ArNH₂ and the S-methylcarbodithioate groups do not participate as coordination sites. A co-crystal of L1 and L2 is analyzed. Structural analyses of the coordination compounds of L3 showed that this ligand behaves as a bidentate ligand through the aniline and the imidazole groups forming six membered rings in the cobalt(II) [Co(L3)Cl₂] (7) and zinc(II) [Zn(L3)Cl₂] (8) compounds, as well as the nickel(II) nitrate [Ni(L3)₂(H₂O)₂](NO₃)₂ (9). The quinazoline L4 was produced by insertion of one acetone molecule and water elimination in L3, its X-ray crystal diffraction analysis, as well as that of its zinc(II) coordination compound [Zn(L4)₂Cl₂] (10), are discussed.     

121,123Sb NQR investigation of chlorofluoroantimonates(III) M2SbCl3F2 (M = Rb. Cs,and NH4)

Antimony(m) chlorofluoride complexes M₂SbCl₃F₂ (M = Rb, Cs, or NH₄) were studied by the^121,123Sb NQR method. A temperature range (77–285 K) with anomalous change in the NQR parameters and a second-order phase transition at 250–280 K for (NH₄)₂SbCl₃F₂ were found.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 382–385, February, 1996     

Reactions of the metallocene dichlorides [M(Cp)2Cl2] (M = Zr, Hf) and [Ti(MeCp)2Cl2] with the pyridine-2,6-dicarboxylate(−2) ligand: Synthesis, spectroscopic characterization and X-ray structures of the products

The reactivity pattern of the 16-electron species [M(Cp)₂Cl₂] (M = Zr, Hf; Cp⁻ = η⁵-C₅H₅⁻) and [Ti(MeCp)₂Cl₂] (MeCp⁻ = η⁵-C₅H₄CH₃⁻) towards the dipicolinate(−2) (dipic²⁻) ligand under mild (ambient temperature) and convenient (aerobic reactions, aqueous media) conditions have been investigated. The syntheses, molecular structures and spectroscopic (IR, ¹H NMR) characterization are reported for the 18-electron products [Zr(Cp)₂(dipic)] (1), [Hf(Cp)₂(dipic)] (2) and [Ti(MeCp)₂(dipic)] (3). The dipic²⁻ ion behaves as N,O,O′-chelating ligand in the three complexes, while the centroids of the Cp⁻ (1, 2) and MeCp⁻ (3) rings formally occupy the fourth and fifth coordination sites about the central metal. The two identical/very similar bite angles of only ∼70° make the dipic²⁻ ligand particularly suited to form stable metallocene derivatives with 5-coordinate geometry. IR and ¹H NMR data are discussed in terms of the known structures and the tridentate chelating mode of the dipic²⁻ ligand.     

Radius-dependent assembly of complexes with the rigid unsymmetric ligand 5-(2-pyridyl)-1,3,4-oxadiazole-2-thione: Syntheses,structures and luminescence properties

The free ligand, 5-(2-pyridyl)-1,3,4-oxadiazole-2-thione (1, HL5), has been synthesized and characterized; its three new functional d¹⁰ transition-metal complexes, [Zn(L5)₂(H₂O)₂] (2), [Cd(L5)₂]_n (3) and [Hg₂(L5)₄] (4), have been successfully obtained by a diffusion synthetic method and characterized by single-crystal X-ray diffraction, infrared spectroscopy, elemental analysis, thermogravimetric analysis, and photoluminescence. On the basis of the X-ray analyses, the radii of the metal ions are found to play an important role in determining the structures. The radii and nature of the metal ions can impart their influence on the coordination geometry of the d¹⁰ transition-metal atoms, which seems to be the main factor controlling the structures and luminescent properties of the reaction products in this system.     

新手性配体(QN)2AQN的合成及其催化肉桂酸甲酯的不对称氨羟化反应研究

在AlCl₃和多聚磷酸的存在下, 以邻苯二甲酸酐和对二氟苯为原料, 通过Friedel-Crafts和环化反应, 用改进的方法以60%的产率生成1,4-二氟蒽醌. 然后通过奎宁锂与1,4-二氟蒽醌的亲核取代反应得到新型手性配体(QN)₂AQN, 产率85%. 在氧化-供氮试剂N-氯代氨基甲酸苄酯存在下, (QN)₂AQN与OsO₄原位生成的催化剂在五种肉桂酸甲酯的不对称氨羟化反应中表现出优异的对映选择性(90%～96% ee)和一般至优秀的区域选择性(75∶25～98∶2), 产率50%～70%, 高于文献报道的结果. 该手性配体易于合成, 成本低廉, 用于催化不对称氨羟化反应, 可以制备光学活性的α-氨基酸酯类化合物.     

High electrochemiluminescence intensity of the Ru(bpy)3 2+/oxalate system on a platinum net electrode

A new method for enhancing the electrochemiluminescence (ECL) intensity of the Ru(bpy)₃ ²⁺/ oxalate system is presented. When a platinum net was used as a working electrode and a platinum foil as an auxiliary electrode, the ECL intensity of the system was enhanced greatly. In addition, a cathodic peak appeared at 0.18 V (vs. SCE) on a platinum net electrode, and ECL of the system was observed at 0.18 V.     

SnO2 negative electrode for lithium ion cell: in situ Mössbauer investigation of chemical changes upon discharge

In situ ¹¹⁹Sn Mössbauer study of an SnO₂ electrode was performed during discharge of a lithium ion cell. The first step is lithium intercalation into the SnO₂ host structure. This lithium intercalation results in reinforcement of the SnO₂ lattice instead of direct decomposition of the oxide upon reduction. This first step is followed by the reduction of tin dioxide into unusual tin species (possibly “exotic” forms of Sn(II) or Sn(0)). The last step of the discharge consists in Li-Sn alloy formation. However, non-reduced SnO₂ is present nearly up to the end of the discharge despite a very low discharge regime. It seems highly probable that this fact is related both to slow Li diffusion and disconnection of SnO₂ particles due to Li₂O formation. The working electrode appears to be rather far from equilibrium during continuous discharge, which means that ideal succession of well-defined stages cannot describe the real phenomena involved in the operating battery.     

Solid substrate-room temperature phosphorimetry for the determination of trace protein using ion association complex [Cu(BPY)2]·[(Fin)2] as a phosphorescent probe

Fluorescein (HFin) emitted strong and stable room temperature phosphorescence (RTP) on filter paper after set at 50 °C for 10 min using Li⁺ as the ion perturber. HFin existed as Fin⁻ when the pH value was in the range of 5.45–7.36. Fin⁻ could react with [Cu(BPY)₂]²⁺ (BPY: α,α-bipyridyl) to produce ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻, which could enhance the RTP signal of Hfin. In the presence of bovine serum albumin (BSA), the –COOH group of Fin⁻ in the [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ could react with the –NH₂ group of BSA to form the ion association complex [Cu(BPY)₂]²⁺·[(Fin-BSA)₂]²⁻, which contained –CO–NH– bond. This complex could sharply enhance the RTP signal of Hfin and the ΔI_p was directly proportional to the content of BSA. According to the facts above, a new solid substrate-room temperature phosphorimetry (SS-RTP) for the determination of trace protein had been established using the ion association complex [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻as a phosphorescent probe. This method had wide linear range (0.40 × 10⁻⁹–280 × 10⁻⁹ mg l⁻¹), high sensitivity (the detection limit (LD) was 1.4 × 10⁻¹⁰ mg l⁻¹), good precision (RSD: 3.4–4.9%) and high selectivity (the allowed concentration of coexistent ions or coexistent materials was high). It had been applied to the determination of the content of protein in 10 kinds of real samples, and the result agreed well with pyrocatechol violet-Mo (VI) method (P.V.M.M.), which indicated it had high accuracy. Meanwhile, reaction mechanism for the determination of trace protein with [Cu(BPY)₂]²⁺·[(Fin)₂]²⁻ phosphorescent probe was also discussed. The academic thought of this research could not only be used to develop many kinds of ion association complex phosphorescent probes, but also provided a new way to promote the sensitivity of SS-RTP.     

From Small {Mo2O4}2+ Aggregates to Infinite Solids

Mononuclear oxohalomolybdates(V) readily generate in the mixtures of alcohols and pyridines through a series of substitution and dimerization reactions, still reactive dinuclear {Mo₂O₄}²⁺ fragments which assemble together into larger cluster species. In all, the {Mo₂O₄}²⁺ unit with the two molybdenum atoms connected by a single metal-metal bond, appears as a recurrent structural motif, either as a single {Mo₂O₄}²⁺ unit in dinuclear compounds or as assemblies of two, three, four or six units through bridging oxygen donor ligands in tetranuclear, hexanuclear, octanuclear and dodecanuclear compounds, respectively. Pyridine, halide, alkoxide and alcohol ligands occupy the peripheral positions of the molybdenum oxide cores. Their structures will be presented in terms of different arrangements and connectivities among the basic dinuclear building blocks. By using a suitable linker, an oxalate adopting a bisbidentate binding mode was shown to serve the purpose, the {Mo₂O₄}²⁺ units were connected into infinite chains.     

Solvent Extraction of Heavy Metals with a 23-Membered Macrocyclic Ionophore Attached with BF 2 + -Capped Cobalt(III) Complex

A new (E, E)-dioxime cobalt(III) complex [Co(HL)₂pyCl]containing four 23-membered macrocyclic ionophores has beenprepared. The cobalt(III) complex [Co(LBF₂)₂pyCl]bridged with BF₂ ⁺ was prepared using the precursorcobalt(III) complex and boron trifluoride ethyl ethercomplex. The solvent extraction of heavy metal cationssuch as Ni²⁺, Cu²⁺, Zn²⁺, Hg²⁺ and Pb²⁺ by the BF₂ ⁺-capped cobalt(III) complex has been investigated. The structure of the complexes is proposedaccording to elemental analyses, ¹H and ¹³C-NMR, IRand mass spectral data.     

Determination of sulfur contents of SO3, S2O3 and S based on the electrocatalytic interaction with homogeneous mediator tris(2,2'-bipyridyl)Ru(II)

A sensitive voltammetric method has been developed for the determination of total or single species of sulfur anions containing sulfide, sulfite and thiosulfate. The method is based on the catalytic effect of tris(2,2'-bipyridyl)Ruthenium(II) (Ru(bpy)₂^+ 2) as a homogeneous mediator on the oxidation of those anions at the surface of a glassy carbon electrode. A reversible redox couple of Ru(II)/Ru(III) were observed as a solute in aqueous solution. Cyclic voltammetry study showed that the catalytic current of the system depends on the concentration of the anions. Optimum pH values for voltammetric determination of sulfite, thiosulfate and sulfide has been found to be 5.6, 10.0 and 10.0, respectively. Under the optimized conditions the calibration curves have been obtained linear in the concentration ranges of 0.8–500.0, 0.4–1000.0 and 0.5–5000.0 µmol L^− 1 of SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The detection limits have been calculated to be 0.40, 0.17 and 0.33 µmol L^− 1 for SO₃²⁻, S₂O₃²⁻ and S²⁻, respectively. The diffusion coefficients of sulfite and thiosulfate have been estimated using chronoamperometry. The chronoamperometric method also has been used to determine the catalytic rate constant for catalytic reaction of the Ru(bpy)₂^+ 2 with sulfite and thiosulfate. Finally the proposed method has been used for the determination of total sulfur contents in real samples of water and wastewater. Moreover the sulfite content in sugar and sulfur dioxide in air has been determined with satisfactory results.