Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Donor–acceptor (D–A) conjugated copolymers are one of known classes of organic optoelectronic materials and have been well developed. However, less attention has been paid on acceptor–acceptor (A–A) conjugated analogs. In this work, two types of A–A conjugated copolymers, namely P1‐Cn and P2‐Cn (n is the carbon number of their alkyl side chains), were designed and synthesized based on perylenediimide ( PDI ) and 2,1,3‐benzothiadiazole ( BT ). Different from P1‐Cn , P2‐Cn polymers have additional acetylene π‐spacers between PDI and BT and thus hold a more planar backbone configuration. Property studies revealed that P2‐Cn polymers possess a much red‐extended UV–vis absorption spectrum, stronger π–π interchain interactions, and one‐order larger electron mobility in their neat film state than P1‐Cn . However, all‐polymer solar cells using P1‐Cn as acceptor component and poly(3‐hexyl thiophene) or poly(2,7‐(9,9‐didodecyl‐fluoene)‐alt?5,5′‐(4,7‐dithienyl‐2‐yl‐2,1,3‐benzothiadiazole) as donor component exhibited much better performance than those based on P2‐Cn . Apart from their backbone chemical structure, the side chains were found to have little influence on the photophysical, electrochemical, and photovoltaic properties for both P1‐Cn and P2‐Cn polymers. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1200–1215     

Isomeric N‐Annulated Perylene Diimide Dimers for Organic Solar Cells

Two isomeric N‐annulated perylene diimide dimers, namely, p‐BDNP and m‐BDNP were designed and synthesized via geometric tuning. The distinct molecular geometry and packing arrangements of isomers with almost identical optical and electrochemical properties rendered us an in‐depth understanding of the molecular structure–aggregation state–photovoltaic performance relationship. Blended with the commercially available donor PCE‐10, p‐BDNP and m‐BDNP showed distinct differences in photovoltaic performance with power conversion efficiencies (PCEs) of 5.01 % and 4.15 %, respectively.     

Tuning the optoelectronic properties of vinylene linked perylenediimide dimer by ring annulation at the inside or outside bay positions for fullerene-free organic solar cells

Among various perylenediimide(PDI)-based small molecular non-fullerene acceptors(NFAs), PDI dimer can effectively avoid the excessive aggregation of single PDI and improve the photovoltaic performance.However, the twist of perylene core in PDI dimer will destroy the effective conjugation. Thus, ring annulation of PDI dimer is a feasible method to balance the film quality and electron transport, but the systematic study has attracted few attentions. Herein, we choose a simple vinylene linked PDI dimer,V-PDI_2, and then conduct further studies on the structure-property-performance relationship of four kinds of derived fused-PDI dimers, namely V-TDI_2, V-FDI_2, V-PDIS_2 and V-PDISe2 respectively. The former two are incorporated thianaphthene and benzofuran at the inside bay positions, and the latter two are fused thiophene and selenophene at the outside bay positions, respectively. Theoretical calculations reveal the inside-and outside-fused structures largely affect the skeleton configuration, the former two tend to be planar structure and the latter two maintain the distorted backbone. The photovoltaic characterizations show that the inside-fused PDI dimers offer high open circuit voltage(V_(OC)), while the outside-fused PDI dimers afford large short-circuit current density(J_(SC)). This variation tendency results from the reasonably tunable energy levels, light absorption, molecular crystallinity and film morphology. As a result,PBDB-T:V-PDISe2 device exhibits the highest power conversion efficiency(PCE) of 6.51%, and PBDB-T:VFDI_2 device realizes the highest V_(OC) of 1.00 V. This contribution indicates that annulation of PDI dimers in outside or inside bay regions is a feasible method to modulate the properties of PDI-based non-fullerene acceptors.     

苝二酰亚胺/聚噻吩复合膜的光电性能研究

在有机光电材料领域,光稳定性好、光谱吸收范围宽、光电转换效率高的材料是研究工作者不断追求的目标．近年来,导电聚合物研究的不断进展使得开发低成本太阳电池成为可能．共轭导电高分子材料由于在一定程度上同时具有聚合物的柔韧性和可加工性、以及无机半导体特性或金属导电性,因而具有巨大的潜在商业应用价值．     

Structural Fusion Yields Guest Acceptors that Enable Ternary Organic Solar Cells with 18.77 % Efficiency

The design and selection of a suitable guest acceptor are particularly important for improving the photovoltaic performance of ternary organic solar cells (OSCs). Herein, we designed and successfully synthesized two asymmetric silicon–oxygen bridged guest acceptors, which featured distinct blue-shifted absorption, upshifted lowest unoccupied molecular orbital energy levels, and larger dipole moments than symmetric silicon–oxygen-bridged acceptor. Ternary devices with the incorporation of 14.2 wt % these two asymmetric guest acceptors exhibited excellent performance with power conversion efficiencies (PCEs) of 18.22 % and 18.77 %, respectively. Our success in precise control of material properties via structural fusion of five-membered carbon linkages and six-membered silicon–oxygen connection at the central electron-donating core unit of fused-ring electron acceptors can attract considerable attention and bring new vigor and vitality for developing new materials toward more efficient OSCs.     

One donor–two acceptor (D–A1)‐(D–A2) random terpolymers containing perylene diimide,naphthalene diimide,and carbazole units

A series of one donor–two acceptor (D–A₁)‐(D–A₂) random terpolymers containing a 2,7‐carbazole donor and varying compositions of perylene diimide (PDI) and naphthalene diimide (NDI) acceptors was synthesized via Suzuki coupling polymerization. The optical properties of the terpolymers are weighted sums of the constituent parent copolymers and all show strong absorption over the 400 to 700 nm range with optical bandgaps ranging from 1.77 to 1.87 eV, depending on acceptor composition. The copolymers were tested as acceptor materials in bulk heterojunction all‐polymer solar cells using poly[(4,8‐bis‐(2‐ethylhexyloxy)‐benzo[1,2‐b;4,5‐b′]dithiophene)‐2,6‐diyl‐alt‐(4‐(2‐ethylhexanoyl)‐thieno[3,4‐b]thiophene)‐2,6‐diyl] (PBDTTT‐C) as the donor material. In contrast to the optoelectronic properties, the measured device parameters are not composition dependent, and rather depend solely on the presence of the NDI unit, where the devices containing any amount of NDI perform half as well as those using the parent polymer containing only carbazole and PDI. Overall this is the first example of a one donor–two acceptor random terpolymer system containing perylene diimide (PDI) and naphthalene diimide (NDI) acceptor units, and demonstrates a facile method of tuning polymer optoelectronic properties while minimizing the need for complicated synthetic and purification steps. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3337–3345     

Effect of Different π-Conjugated Dyes Containing 4,5-Diazafluorenone-9- Hydrazone on The Performance of Dye-Sensitized Solar Cells

In this study, two ligands and their ruthenium complexes are synthesized and their photovoltaic properties for dye-sensitized solar cells (DSSCs) of new substances substituted by 4,5-diazafluorenone-9-hydrazone groups is investigated. The structures of the compounds are determined by FTIR, UV-Vis, HNMR, CNMR, and MS spectroscopic techniques. The photovoltaic and electrochemical properties of these compounds are investigated and the applicability in DSSCs as photo sensitizers is studied. Photovoltaic cell efficiencies (PCEs) of the devices are in the range 0.08-1.54% under simulated AM 1.5 solar irradiation of 100 mW/cm², and the highest open-circuit voltage (V_oc) reaches 0.43 V. When the photovoltaic performance of the DSSC devices is compared, it indicates that PCEs assume the following: P1–Ru > > P2–Ru > P1 > P2. The PCE value of 1.54% is obtained with DSSC based on P1–Ru under AM irradiation (100 mW/cm²). DSSC based on the P1–Ru produced efficiency of 1.54% whereas DSSC-based P1 exhibits the device performance with an efficiency of 0.08% under illumination. These results suggest that a larger π-conjugated bridge and a richer electron donor of P1–Ru are beneficial for the photovoltaic performance of DSSC.     

Design of Furan-Based Acceptors for Organic Photovoltaics

We explore a series of furan-based non-fullerene acceptors and report their optoelectronic properties, solid-state packing, photodegradation mechanism and application in photovoltaic devices. Incorporating furan building blocks leads to the expected enhanced backbone planarity, reduced band gap and red-shifted absorption of these acceptors. Still, their position in the molecule is critical for stability and device performance. We found that the photodegradation of these acceptors originates from two distinct pathways: electrocyclic photoisomerization and Diels–Alder cycloaddition of singlet oxygen. These mechanisms are of general significance to most non-fullerene acceptors, and the photostability depends strongly on the molecular structure. Placement of furans next to the acceptor termini leads to better photostability, well-balanced hole/electron transport, and significantly improved device performance. Methylfuran as the linker offers the best photostability and power conversion efficiency (>14 %), outperforming all furan-based acceptors reported to date and all indacenodithiophene-based acceptors. Our findings show the possibility of photostable furan-based alternatives to the currently omnipresent thiophene-based photovoltaic materials.     

Desymmetrization of Perylenediimide Bay Regions Using Selective Suzuki–Miyaura Reactions from Dinitro Substituted Derivatives

Bay decoration of perylenediimide (PDI) is an attractive approach for tuning the optoelectronic properties of the dye as well as breaking backbone planarity, which provides the possibility of preventing the undesired formation of aggregates. This is usually performed through successive bis-bromination of PDI and pallado-catalyzed cross-coupling, which leads to symmetric triads. We now describe an efficient synthetic strategy for desymmetrization of the accepting PDI core by starting from its bis-nitration. To this end, Suzuki–Miyaura Couplings (SMC) were carried out on a mixture of 1,6- and 1,7-dinitroPDI regioisomers to add triphenylamine donating moieties and obtain donor–acceptor–donor triads. Investigation of the reactivity of dinitro PDI derivatives toward SMC has allowed us to access unprecedented asymmetric π-conjugated PDI-centered triads. These 1,6- and 1,7-PDI based triads, prepared as regioisomeric mixtures, were successfully separated and their spectroscopic, crystallographic and optoelectronic differences are reported.     

Synthesis and photovoltaic properties of low bandgap dimeric perylene diimide based non-fullerene acceptors

Non-fullerene organic acceptors have attracted increasing attention in recent years. One of the challenges in the synthesis of non-fullerene organic acceptors is to tune the absorption spectrum and molecular frontier orbitals, affording low bandgap molecules with improved absorption of the near-infrared solar photons. In this paper, we present the synthesis, optoelectronic and photovoltaic properties of a series of dimeric perylene diimide(PDI) based non-fullerene acceptors. These PDI dimers are bridged by oligothiophene(T) from 1T to 6T. With the increase of the oligothienyl size, the highest occupied molecular orbital(HOMO) energy is raised from ?5.65 to ?5.10 e V, while that of the lowest unoccupied molecular orbit(LUMO) is kept constant at ?3.84 e V, affording narrow bandgap from 1.81 to 1.26 e V. The absorption from the oligothiophene occurs between 350 and 500 nm, which is complementary to that from its bridged PDI units, leading to a wide spectral coverage from 350 to 850 nm. The optimal dihedral angle between the bridged two perylene planes is dependent on the oligothienyl size, varying from 5° to 30°. The solubility of the dimers depends on the oligothienyl size and can be tuned by the alkyl chains on the bridged thienyl units. The possible applications as the solution-processable non-fullerene organic acceptor is primarily studied using commercial P3 HT as the blend donor. The photovoltaic results indicate that 1T, 4T and 6T all yield a higher efficiency of ?1.2%, whereas 2T, 3T and 5T all give a lower efficiency of 0.5%. The difference in the cell performance is related with the tradeoff between the differences of absorption, HOMO level and film-morphology between these dimers.     

Effect of Arylmethylene Substitutions on Molecular Structure,Optoelectronic Properties and Photovoltaic Performance of Dithienocyclopentafluorene-Based Small-Molecule Acceptors

Two dithienocyclopentafluorene-based small-molecule acceptors (SMAs) were developed that feature methylene-functionalized conjugated side chains, to study the effect of arylmethylene substitution and its number on structure, optoelectronic properties and device performance. Results showed that two SMAs have better absorption properties and planarity, lower bandgaps and higher LUMOs compared with the control SMA without conjugated side chains. The synthesized SMAs were tested in polymer solar cells for examples of their applicability. This work argues that the introduction of methylene-functionalized conjugated side chains has great potential in tuning molecular structure, optoelectronic properties, device physics and photovoltaic performance of SMAs.     

Phthalimide and Naphthalimide end‐Capped Diketopyrrolopyrrole for Organic Photovoltaic Applications

Two small molecules named PI‐DPP and NI‐DPP with a DPP core as the central strong acceptor unit and phthalimide/naphthalimide as the terminal weak acceptor were designed and synthesized. The effects of terminal phthalimide/naphthalimide units on the thermal behavior, optical and electrochemical properties, as well as the photovoltaic performance of these two materials were systematically studied. Cyclic voltammetry revealed that the lowest unoccupied molecular orbitals (LUMO) (~ ‐3.6 eV) of both molecules were intermediate to common electron donor (P3HT) and acceptor (PCBM). This indicated that PI‐DPP and NI‐DPP may uniquely serve as electron donor when blended with PCBM, and as electron acceptor when blended with P3HT, where sufficient driving forces between DPPs and PCBM, as well as between P3HT and DPPs should be created for exciton dissociation. Using as electron donor materials, PI‐DPP and NI‐DPP devices exhibited low power conversion efficiencies (PCEs) of 0.90% and 0.76% by blending with PCBM, respectively. And a preliminary evaluation of the potential of the NI‐DPP as electron acceptor material was carried out using P3HT as a donor material, and P3HT: NI‐DPP device showed a PCE of 0.6%, with an open circuit voltage (V _OC) of 0.7 V, a short circuit current density (J _SC) of 1.91 mA•cm^‐2, and a fill factor (FF) of 45%.     

Bulk heterojunction polymer solar cells based on binary and ternary blend systems

Polymer solar cells (PSCs) were fabricated using a ternary blend film consisting two conjugated polymers and a soluble fullerene derivative as the donor and acceptor materials, respectively. And, to compare ternary blend system, the single‐component copolymers consisting of the repeating units of each of the copolymers, used in ternary blend solar cells, were designed and synthesized for use as the electron donor materials in binary blend solar cells. We systematically investigated the field‐effect carrier mobilities and the optical, electrochemical, and photovoltaic properties of the copolymers. Under optimized conditions, the binary blend polymer systems showed power conversion efficiencies (PCEs) for the PSCs in the range 3.87–4.16% under AM 1.5 illumination (100 mW cm^?2). All polymers exhibited similar PCEs that did not depend on the ratio of repeating units. The binary blend solar cell containing a single‐component copolymer as the electron donor material performed better than the ternary blend solar cell in this work. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Small compounds based on 2,7-silafluorene and 4,7-di (2′-thienyl) for heterojunction organic solar cells: DFT study

To understand the effect of the substitution by several strong electron-withdrawing groups ([1,2,5]thiadiazolo[3,4-g]quinoxaline; benzo[c][1,2,5]thiadiazole and quinoxaline) and end-capped donor groups (thiophene and phenyl) on the structural and optoelectronic properties of six conjugated compounds C1–C6 based on 2,7-silafluorene and 4,7-di (2′-thienyl) used for organic solar cells application such as bulk heterojunction (BHJ) solar cell. We have done a theoretical study to calculate and predict these properties. The electronic structures and optical absorption spectra of donors were calculated using density functional theory, and the Zerner’s intermediate neglect of differential overlap functional theory level is employed to investigate the excited singlet states, respectively, and to shed light on how the substitution and the pi-conjugation order influence the performance of these compounds in the BHJ cell. Moreover, the theoretical results including optoelectronic and photovoltaic properties of the compound C1 are in good agreement with the available experimental data extracted from bibliography. The calculated results of these molecules reveal that the compounds C3 and C6, with the [1,2,5]thiadiazolo[3,4-g]quinoxaline as electron acceptor seem to be good candidates materials for photovoltaic applications due to their best optoelectronic and photovoltaic properties.     

Conjugated polymers with broad absorption: Synthesis and application in polymer solar cells

A series of main chain donor‐acceptor low‐bandgap conjugated polymers were designed, synthesized, and used for the fabrication of polymer solar cells. The absorption spectra of low‐bandgap conjugated polymers were tuned by the ratio of three copolymerization monomers. The polymers in films exhibited broad absorption ranging from 300 to 1000 nm with optical bandgaps of around 1.40 eV. All of the polymers have been investigated as an electron donor in photovoltaic cells blending with PCBM ([6, 6]‐phenyl C61‐butyric acid methyl ester) as an electron acceptor and power conversion efficiencies (PCEs) of 1.32–1.8% have been obtained. As for P1 , PCE increases from 1.67 to 2.44% after adding 1,8‐diiodooctance as an additive. The higher PCEs are probably because of better phase separation of blend films. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2571–2578, 2010     

Crystalline Cooperativity of Donor and Acceptor Segments in Double‐Cable Conjugated Polymers toward Efficient Single‐Component Organic Solar Cells

The crystalline cooperativity of the donor and acceptor segment in double‐cable conjugated polymers plays an important role in the nanophase separation and photovoltaic performance in single‐component organic solar cells (SCOSCs). Two double‐cable conjugated polymers with the same conjugated backbone and perylene bisimide (PBI) side units were designed in which PBIs were positioned symmetrically and perpendicularly ( P1 ) and asymmetrically and slantingly ( P2 ) along the conjugated backbones. After thermal annealing, both conjugated backbones and PBI side units in P1 tend to form ordered nanostructures, while PBI side units in P2 dominated the crystallization and hamper the crystallization of conjugated backbones. P1 showed good crystalline cooperativity between conjugated backbones and PBI side units, resulting in improved power conversion efficiencies (PCEs) up to 3.43 % in SCOSCs, while P2 with poor crystalline cooperativity exhibited PCEs below 2.42 %.     

Synthesis and investigation of photovoltaic properties for polymer semiconductors based on porphyrin compounds as light-harvesting units

We reported on two polymer semiconducting copolymers based on porphyrin compounds, poly[9,9-dioctylfluorene-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PFPor) and poly[9-(heptadecan-9-yl)carbazole-co-5,15-bis(hexoxybenzyl)-10,20-bis(benzo-4-yl)porphyrin] (PCPor), for use as organic photovoltaic materials. The thermal, optical, electrochemical, and photovoltaic properties of the two polymers were investigated. In addition, PC₆₁BM and PC₇₁BM were introduced as acceptor materials to confirm the acceptor effect in bulk heterojunction photovoltaic devices. Moreover, in order to establish acceptor effects, morphologies of polymer/PCBM blend films were analyzed through atomic force microscopy (AFM). PFPor and PCPor exhibited the best device performance with power conversion efficiencies (PCE) of 0.62% and 0.76%, respectively, upon the introduction of PC₇₁BM as the acceptor in the device where 86 wt.% of the PC₇₁BM was contained in the active layer (pol:PC₇₁BM = 1:6, w/w).     

Effect of branched alkyl side chains on the performance of thin‐film transistors and photovoltaic cells fabricated with isoindigo‐based conjugated polymers

New isoindigo and di(thienyl)ethylene‐containing π‐extended conjugated polymers with different branched side chains were synthesized to investigate their physical properties and device performance in thin‐film transistors and photovoltaic cells. 11‐Butyltricosane (S3) and 11‐heptyltricosane (S6) groups were used as side‐chain moieties tethered to isoindigo units. The linking groups between the polymer backbone and bifurcation point in the branched side chain differ in the two polymers (i.e., PIDTE‐S3 and PIDTE‐S6 ). The polymers bearing S6 side chains showed much better charge transport behavior than those with S3 side chains. Thermally annealed PIDTE‐S6 film exhibited an outstanding hole mobility of 4.07 cm² V^?1 s^?1 under ambient conditions. Furthermore, bulk heterojunction organic photovoltaic cells made from a blend film of PIDTE‐S3 and (6,6)‐phenyl C61‐butyric acid methyl ester demonstrated promising device performance with a power conversion efficiency in the range of 4.9–5.0%. © 2015 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 2015 , 53, 1226–1234     

Fluorination vs. chlorination: a case study on high performance organic photovoltaic materials

Halogenation is a very efficient chemical modification method to tune the molecular energy levels, absorption spectra and molecular packing of organic semiconductors. Recently, in the field of organic solar cells(OSCs), both fluorine-and chlorinesubstituted photovoltaic materials, including donors and acceptors, demonstrated their great potentials in achieving high power conversion efficiencies(PCEs), raising a question that how to make a decision between fluorination and chlorination when designing materials. Herein, we systemically studied the impact of fluorination and chlorination on the properties of resulting donors(PBDB-T-2 F and PBDB-T-2 Cl) and acceptors(IT-4 F and IT-4 Cl). The results suggest that all the OSCs based on different donor and acceptor combinations can deliver good PCEs around 13%–14%. Chlorination is more effective than fluorination in downshifting the molecular energy levels and broadening the absorption spectra. The influence of chlorination and fluorination on the crystallinity of the resulting materials is dependent on their introduction positions. As chlorination has the advantage of easy synthesis, it is more attractive in designing low-cost photovoltaic materials and therefore may have more potential in largescale applications.     

Dialkoxymethano[60]fullerenes as electron acceptors in thin-film organic solar cells

This study presents the synthesis, characterization, and electrochemical properties of four new dialkoxymethanofullerenes, as well as their performance in organic solar cells (OSCs) devices. Dialkoxymethanofullerenes were synthesized in 27%–32% yield by thermolysis of dialkoxyoxadiazolines and reaction with C₆₀ under reflux in toluene. The prepared compounds were then characterized and used for the first time as electron-acceptor materials in thin-film bulk heterojunction OSCs with PBTZT-stat-BDTT-8 as the electron donor material. The devices made with ethoxy-hexyloxymethanofullerene and methoxy-hexyloxymethanofullerene exhibited optimal power conversion efficiencies (PCEs) of 3.79% and 4.65%, with open-circuit voltage of 0.832 and 0.831 V, respectively. In contrast, the devices made with ethoxy-ethoxymethanofullerene and methoxy-ethoxymethanofullerene exhibited very low PCEs of <0.01% for both, indicating a large impact of the substituents on device performance.