Realization of an efficient coherent combination via Michelson cavity

An intracavity coherent coupling Michelson erbium-doped fibre (EDF) laser (MCEDFL) is proposed and demonstrated. By using this laser system, we find a means to obtain a maximum power output at the same pumping power level. From the experiment based on fibre Bragg gratings (FBGs) with different reflectivities from 6{\%} to 100{\%}, we find that the reflectivity of the FBG plays a vital role in improving the performance of the MCEDFL. At the same time, the MCEDFL with a polarizer can be coherently combined effectively. This type of system, in principle, is compatible with other more powerful pumping methods, such as cladding pumping, and brings some novel perspectives to the realization of high power lasers.     

Enhancing Coherent Combining Efficiency via Choosing Appropriate Lasing Wavelength in a Michelson Compound Cavity Based on Two 3 dB Fibre Loop Mirrors and One Fibre Bragg Grating

Enhancing coherent combining efficiency via choosing appropriate lasing wavelength in a Michelson compound cavity based on two 3 dB fibre loop mirrors and one fibre Bragg grating （FBG） has been experimentally demonstrated. The FBG with 4.5% reflectivity is replaced at the cleaved facet with 4% Fresnel reflection. A high coherent combining efficiency of 93.5% is obtained when the FBG with central wavelength at 1559.845nm is introduced into the cavity, while it is only 90.1% combining efficiency with the FBG at central wavelength 1557.830 nm. In comparison with other reports, the proposed compound-cavity laser has the advantage of needless tuning FBG to obtain the coherent condition, and it is facile to ascertain the seemly wavelength lasing for a Michelson compound cavity.     

Coherent phonon excitation in bismuth

Ultrafast time-resolved reflectivity of a bismuth thin film evaporated on a silicon substrate is measured to investigate coherent phonons in bismuth. The reflectivity result is analyzed by a linear chirp approximation to obtain the time dependent frequencies of coherent phonons. Not only the optical modes are detected, which are generated by a combination of impulsive stimulated Raman scattering and displacive excitation of coherent phonon, acoustic phonon modes are also observed, which are emitted by the A_1g optical phonon.     

Phase-Locked Fibre Array for Coherent Combination and Atmosphere Aberration Compensation

We report a fibre amplifier array that not only achieves coherent beam combination by compensation of phase noises of fibre amplifier, but also accomplishes correction of atmosphere aberration. It is of master-oscillatormultiple-amplifier （MOPA） configuration, which can be phase-locked by the multidither principle or heterodyne detection principle. First laboratory experiments of atmosphere aberration compensation of a three-element fibre amplifier array are reported. The atmosphere aberration is created by a phase screen in the experiment. The phase changes of the beam, which are introduced by the fibre amplifier and the phase screen, are both detected by the heterodyne detection method. Phase modulators are controlled to compensate for the phase in the three paths. No matter whether there is a phase screen producing atmosphere aberration or not, the dim dynamic interference fringes in the far field turn to a clear and stable pattern, and the peak intensity is maximized. It is indicated that the fibre amplifier array is phase-locked, and coherent combination of the three beams is achieved. It can be used not only to obtain high power fibre laser array but also in laser space communication.     

通过外加应变于高双折射环镜实现掺铒光纤激光器的输出功率控制

本文提出一种基于外加应力于高双折射环镜的输出功率可调控的掺铒光纤激光器新颖结构。通过将高双折射光纤环镜中的部分双折射光纤粘贴于一个等强度梁的中性面上，在梁尾端作用不同的应力，由于双折射光纤的长度和双折射的改变可使环镜的反射率从0.8%变化到100%。以该环镜作为线形腔光纤激光器的输出腔镜，实现了动态范围达33dB的输出功率可调控的掺铒光纤激光器。该激光器不仅具有结构简单、成本低廉的优点，而且利用该机理可以很容易的找出最优腔镜反射率，从而使线形腔光纤激光器的输出性能实现最优化。     

CO2相干激光轮廓成像研究

本文以自制CO_2相干激光成像的实验系统,成功地实现了相干激光的彩色轮廓成像。     

Stable Dual-Wavelength Fibre Laser with Bragg Gratings Fabricated in a Polarization-Maintaining Erbium-Doped Fibre

A new polarization-independent duai-wavelength fibre laser by fabricating a uniform FBG and a chirped FBG in a polarization-maintaining erbium-doped fibre （PM-EDF） is proposed and demonstrated. The wavelength spacing is 0.18nm and the optical signal-to-noise ratio is greater than 50dB with pump power of 246mW. Chirped FBG is used to make the reflectivity wavelengths of two PM-FBGs match easier. Since both EDF and FBGs are polarization-maintaining without splices and the two wavelengths are polarization-independent, the maximum amplitude variation and wavelength shifts for both lasing wavelength with 3-min intervals over a period of six hours are less than 0.2 dB and 0.005 nm, respectively, which shows stable dual-wavelength output.     

Experimental Investigation of High Power Erbium-Ytterbium Co-doped Double Clad Fibre Laser

All-fibre high power erbium-ytterbium co-doped double clad fibre lasers are proposed and demonstrated. By using different back-cavity mirrors, the different double clad fibre lasers are constructed. It is experimentally found that the output behaviour of laser can be controlled by a back-cavity mirror. The lower the reflectivity of the back-cavity mirror, the higher the output power and the high the slop efficiency. The maximum output power is about 1.6 W and the slop efficiency is 27.6%.     

Details of coherent phonon motion in tellurium

We study impulsively excited coherent phonons in tellurium at various lattice temperatures and excitation densities. From a comparison with temperature-dependent reflectivity and X-ray scattering data, we infer the direction and estimate the amplitude of the coherent ionic motion. In addition, we show quantitatively that electronic weakening of the crystal forms the dominant contribution to a density-dependent red-shift of the phonon frequency.     

两光子晶体光纤激光器相干锁定的实验研究

利用自成像腔技术进行光子晶体光纤(PCF)激光器光束相干合成的实验研究,实现了两光子晶体光纤激光器的相位锁定.在不使用滤波器的情况下,实验仍能观测到清晰的下涉图样,且在高功率输出状态以及环境噪声情况下干涉图样仍可保持稳定,表明具有单模大模场特性的光子晶体光纤在实现光束相干合成方面比传统的双包层光纤(DCF)有明显的优越性.实验还表明耦合输出镜的反射率对相干输出功率有一定影响,当反射镜的反射率分别为5%,10%和15%时,两台激光器相干输出斜率效率分别为63.8%,61.6%和60.2%.在抽运功率为150 W和耦合输出镜的反射率为5%时,获得95.8 W的最大相干功率输出,相干功率合成效率为90.2%.实验中无任何热光效应产生,有望利用该方法获得更高的相干输出功率.     

Lifetime of optical phonons in fs-laser excited bismuth

This paper presents experimental and theoretical results on the temperature-dependent optical response of a single crystal of bismuth to excitation by femtosecond laser pulses. We demonstrate that the measured damping rate of the transient reflectivity oscillations relates to the lifetime of optical phonons. The lifetime is the inverse rate of the decay of optical phonons into two acoustic phonons. This lifetime also indicates the approach to the vibration instability (catastrophe) threshold that manifests the beginning of the disordering of a solid crystal and transition to a liquid state. We observe the red shift of phonon frequency, which increases with the rise of the initial lattice temperature. The red shift is different from the previously observed red shift proportional to the electron temperature, and thus to the excitation laser fluence. The coherent phonon excitation process imprinted into the initial change in the reflectivity and the following reflectivity oscillations allowed us to uncover the temporal phonon history preceding the structural transformation of solid Bi.     

Fibre optic target reflectivity sensor

This paper reports the principle of operation, the design aspects, experimentation and performance of a fibre optic target reflectivity sensor to examine the correlation between the detector output, variation in material type and the reflectivity properties of the materials tested. The device consists of a fibre optic transmitter, a fibre optic probe, target and a photodiode detector. The fibre optic probe consists of two well-polished PMMA (polymethyl methacrylate) fibres cemented together along some distance over the length. The principle of fibre optic lever displacement sensors is applied. Material effects are examined by preparing a variety of samples namely gold coated mirror, copper, brass, aluminium, steel and galvanized iron using the same polishing techniques. It is found that the response of the sensor changes with change of target surface. The results show that the fibre optic probe is capable of discriminating between materials. With the use of commercially available fibre, source and detector, the set-up proves to be simple, highly sensitive, low cost and versatile one, which can be adopted for on-line measurement or inspection of test components.     

一种基于超材料的吸波材料的设计与制备

设计了一种基于超材料的吸波材料,吸波材料由周期性排列的电阻片,基体以及金属背底构成. 采用时域有限差分法(FDTD)计算了吸波材料的反射率,并用遗传算法优化了吸波材料的吸波带宽,得到一种反射率在8-18 GHz小于-10 dB的吸波材料,材料厚度仅为3 mm. 采用手糊工艺制备了空心石英纤维增强环氧树脂基体,丝网印刷制备了电阻片,实现了所设计的吸波材料,测试表明,实验结果和设计结果一致. 关键词： 雷达吸波材料 超材料 频率选择表面 遗传算法     

相干场成像原理局限性分析

研究了相干场成像技术(又称傅里叶望远术)的基本原理,从理论上分析其局限性,明确定义测量对象并通过曲面积分推导成像过程中的数学关系.结果表明,该技术的重建图像中含测量对象表面的梯度信息,其对物体表面反射率分布的测量是不准确的,并进行了计算机仿真验证.这为评估该技术成像结果和进一步发展相干场三维成像提供借鉴.     

Coherent, polarization and temporal properties of self-frequency shifted solitons generated in polarization-maintaining microstructured fibre

Coherence of both self-frequency shifted solitons and short-wavelength non-soliton radiation generated in a micro-structure fibre was investigated experimentally for the first time. Their spectral, temporal and polarization characteristics were studied as well. We found the solitons generated in 30-cm-long fibre pumped with 50-fs pulses at 795 nm and 835 nm from Ti:Sapphire oscillator to be coherent, whereas degree of coherence of blue-shifted radiation was amounted to 0.25–0.57 depending on wavelength.     

弱相干光源测量设备无关量子密钥分发系统的性能优化分析

测量设备无关量子密钥分发系统能够抵御任何针对单光子探测器边信道的攻击, 进一步结合诱惑态的方案, 可以同时规避准单光子源引起的实际安全漏洞. 测量设备无关量子密钥分发系统中, 非对称传输、分束器的不对称以及各个单光子探测器存在实际参数差异等光学系统的具体实现特征会对系统误码率和成码率等性能产生一定的影响. 本文针对采用弱相干光源的测量设备无关量子密钥分发系统, 引入单光子探测器品质因子的实验参数(暗计数与探测效率的比值), 通过量子化描述, 理论推导并模拟了误码率与单光子探测器品质因子、分束器反射率以及通信双方弱相干光源平均光子数之间的关系. 结果表明: 在X基偏振编码 和相位编码系统中, 当分束器的反射率趋近于0.5时, 误码率取最小值; 在偏振编码和相位编码系统中, 误码率随着单光子探测器品质因子的增大而增大; 在Z基偏振编码系统中, 误码率随分束器的反射率的变化会呈现较小的波动, 当分束器的反射率为0.5时, 若通信双方采用的平均光子数相差较大, 则误码率取最大值; 分束器的反射率和平均光子数对误码率的影响在Z基情况下不能等同, 但是对于X基编码和相位编码却能等同.     

Coherent Beam Combination of Two Polarization Maintaining Ytterbium Fibre Amplifiers

We investigate coherent beam combination of fibre laser beams by phase locking. Phase noise of a polarization maintaining ytterbium fibre amplifier is inspected with a fibre interferometer. In a feed back control loop, two fibre polarization maintaining ytterbium amplifiers are phase locked and coherent combined when the phase noise is properly controlled by a LiNO3 phase modulator.     

Propagation of high-power partially coherent fibre laser beams in a real environment

The propagation performance of high-power partially coherent fibre laser beams in a real environment is investigated and the theoretical model of a high-power fibre laser propagating in a real environment is established. The influence of a collimating system and thermal blooming is considered together with atmospheric turbulence and mechanical jitter. The laser energy concentration of partially coherent beams in the far field is calculated and analysed based on the theoretical model. It is shown that the propagation performance of partially coherent beams depends on the collimating system, atmospheric turbulence, mechanical jitter and thermal blooming. The propagation performance of partially coherent beams and fully coherent beams is studied and the results show that partially coherent beams are less sensitive to the influence of thermal blooming, which results in that the energy degeneration for partially coherent beams is only 50% of that for fully coherent beams. Both partially coherent beams and fully coherent beams become less sensitive to thermal blooming when the average structural constant of the refraction index fluctuations increases to 1.7 × 10^-14 m^-2/3. The investigation presents a reference for applications of a high-power fibre laser system.     

Detection of elements with coherent reflectivity inside a multiscatterers incoherent media

In this paper we use the Spatial Compound method to detect a long element with coherent reflectivity within a vast incoherent media. We consider the case in which the echographics temporal signals of the coherent element, and of the scatterers of the media in which it is hidden are of the same order of amplitude. We calculate analytically the spatial coherent function of the acoustic pressure signals considering space-temporal averages. We find experimentally that when there is a coherent long scatter this function is broader (in the spatial direction along the scatter) than when there is only incoherent media. By selecting short temporal windows of analysis we show the possibility of detecting the depth where the coherent element is located.     

14-fs high temporal quality injector for ultra-high intensity laser

We present a chirped pulse amplification (CPA) Ti:Sa laser generating sub-15 fs pulses with expected high temporal quality. Gain-narrowing in the pre-amplifier is balanced by a variable spectral reflectivity mirror and by a fine adaptation of the saturation conditions. A crossed polarized wave generation (XPW) filter is introduced to enhance the contrast, reduce the pulse duration and improve the spectral quality. The pulses are generated at 10 Hz repetition rate, with pulse energy of 110 μJ and very clean Gaussian spectrum. The temporal contrast is evaluated by a measurement before the XPW filter and calculations of the enhancement by the filter. The potential temporal incoherent contrast is 10¹² and the coherent contrast 10¹⁰. The performance of the system makes it suitable as an injector for petawatt lasers operating in the double-CPA scheme.