高效毛细管区带电泳法分离人血清蛋白质的研究

 研究了高效毛细管区带电泳分离人血清蛋白质的电泳行为及实验条件 ,建立了分离血清蛋白质的高效毛细管区带电泳法。血清样品经硼酸缓冲液 (5 0 mmol/L,p H8.80 )稀释后 ,以 0 .1 mol/L硼酸缓冲液 (p H9.3 5 ,含4g/L PEG80 0 0 )为电泳介质 ,在 5 0 μm i.d.× 3 7cm弹性石英毛细管柱 (有效柱长为 3 2 cm)中进行电泳分离 ,以2 0 0 nm紫外波长检测。方法简便、快速、重复性好 ,1 2 min内便可完成对血清中蛋白质的电泳分离。     

应用毛细管区带电泳测定人血清蛋白

摘要：研究了一种用于临床检测血清蛋白的毛细管区带电泳方法。弹性石英毛细管50μmi.d.×47cm（40cm有效长度）,检测波长200nm,血清用运行缓冲液（含12.5mmol/L四硼酸钠、1mmol/L乳酸钙、0.7mmol/L硫酸镁,pH9.70）稀释40倍,气压进样17.23kPa·s,分析电压23kV。正常血清蛋白分为6种,孕妇的分7种（多一个未知的α0峰）。将正常人、孕妇、多发性骨髓瘤和强直性脊柱炎患者的血清蛋白的毛细管电泳与传统的醋酸纤维膜电泳相比较,前者具有高分辨率、在线数据处理和自动化的特     

聚丙烯酰胺凝胶电泳直接化学发光成像法分离和检测血液红细胞中的HbA0,HbA1,HbA2和HbF

建立了聚丙烯酰胺凝胶电泳直接化学发光成像分离和检测蛋白质的新方法．应用本方法分离和检测了新生儿脐带血和正常成年人血液红细胞中的不同血红蛋白HbA0,HbA1,HbA2和HbF,并与传统的考马斯亮兰染色法进行了比较,结果表明,本方法灵敏度高、背景低,步骤简单、快速,可以在10min内得到检测结果．此外,我们还以血红蛋白作为探针,检测了人血清蛋白,研究了人血清白蛋白对血红蛋白电泳结果的影响,并优化了发光成像的各种条件．     

中药多糖及人血清中糖蛋白N-糖链的毛细管电泳指纹图谱研究

该文建立了激光诱导荧光毛细管电泳(CE-LIF)检测中药多糖和人血清糖蛋白中N-糖链的分析方法。利用8-氨基芘-1,3,6-三磺酸钠(APTS)为柱前荧光衍生试剂,结合CE分析,可在15 min内同时测定7种中性单糖。该方法应用于中药制剂和药物植物中单糖组成和含量的测定,加标回收率为88.0%~102%,相对标准偏差(RSD)小于3.0%。该方法灵敏度高、准确性好、实用可靠,适合于监控中药制剂中糖类物质的种类和含量。同时,基于毛细管凝胶电泳方法(CGE)建立了人血清中糖蛋白的N-糖链指纹图谱。利用中性涂层聚乙烯醇(PVA)有效地抑制电渗流,增加分离时间,实现了糖链异构体的有效分离。对5μL人血清进行毛细管电泳分析,共分离得到17个组分。这为进一步研究复杂生物体系血清蛋白的糖基化变化提供了可能性。     

毛细管区带电泳法快速测定人血血清蛋白

人血血清蛋白电泳分析是临床上诊断多种疾病的常用生化指标 ,也是临床实验室检查的常规项目。目前采用的方法有醋酸纤维薄膜电泳和琼脂糖电泳 ,尤以前者为主。由于醋酸纤维薄膜电泳法操作繁琐 ,每一步骤均需手工完成 ,影响因素较多 ,初学者往往不易掌握 ,且测定的重复性较差。高效毛细管电泳是近几年来迅速发展起来的分离分析技术 [1,2 ]。用该技术分析人血清蛋白国内外虽有报道 ,但由于人血清中蛋白质组分甚为复杂 ,采用不同的分离方法和条件可出现不同数量的组分峰 ( 6、7个甚至 1 0个以上组分 ) ,与目前临床上常用的醋酸纤维薄膜电泳图谱…     

微流控芯片毛细管电泳在蛋白质分离分析中的应用研究进展

重点介绍了近年来国内外在微流控芯片毛细管电泳法用于蛋白质分离分析方面的研究进展。按照分离模式的不同,综述了各种应用于蛋白质分离的微流控芯片毛细管电泳系统,讨论了抑制芯片中的蛋白吸附的各种方法,并展望了芯片毛细管电泳系统在蛋白质分离领域的发展前景。引用文献47篇。     

毛细管电泳-激光诱导荧光检测法分析胃癌组织及癌旁正常组织蛋白质的差异性

胃癌是临床常见的恶性肿瘤之一。近年来寻找肿瘤相关特异蛋白质是蛋白质组学研究的热点。本文通过考察毛细管动态涂层方法、筛分介质聚环氧乙烷(PEO)的浓度、缓冲液的pH值、分离电压、温度及荧光染料对分离效果的影响,建立了毛细管电泳-激光诱导荧光法分离胃癌组织及癌旁正常组织蛋白质的方法;通过分离检测,获得两者的蛋白质指纹图谱。经分析,两者的指纹图谱相似度达到0.8以上,差异蛋白质分子质量集中在50000~100000 Da之间,提示某些小分子蛋白质可能是和肿瘤发生相关的特异蛋白质,从而缩小了特异性分子标记物的筛选范围。病理组织学分型及蛋白质电泳峰数目的统计结果验证了该方法的可靠性。该方法具有临床应用的潜力。     

聚(2-甲基-2-噁唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚（2-甲基-2-噁唑啉）（PMOXA）作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚（2-甲基-2-噁唑啉）在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物（如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A）,而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物（如聚丙烯酸）构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质（如牛血清白蛋白、溶菌酶）,在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚（2-甲基-2-噁唑啉）会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚（2-甲基-2-噁唑啉）在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

聚(2-甲基-2-■唑啉)在毛细管电泳分离蛋白质中的应用

毛细管电泳作为一种常见的液相分离技术,因其分析速度快、分离效率高、样品消耗量少等特点,在蛋白质分离分析领域有广泛应用。然而,常用的熔融硅毛细管容易吸附蛋白质,导致电渗流不稳定,分离结果重现性变差;此外,商用毛细管电泳中常用的紫外检测器由于光程短,使得毛细管电泳的检测灵敏度往往不能达到低丰度蛋白质的直接分析要求。因此寻找能够阻止蛋白质吸附、同时能够提高检测灵敏度的涂层是毛细管电泳分离分析蛋白质的重要课题之一。聚(2-甲基-2-■唑啉)(PMOXA)作为一种类肽类亲水性聚合物,具有与抗蛋白质吸附聚合物聚乙二醇类似的亲水性、抗蛋白质吸附性和生物相容性,而且其类肽结构使之具有较聚乙二醇更好的稳定性,因此近年来在生物质传递、药物载体和阻抗蛋白质吸附等领域得到越来越多的应用。该文主要从两个方面对聚(2-甲基-2-■唑啉)在毛细管电泳中的应用进行了阐述。一是利用多巴胺作为黏合层将其涂覆在毛细管内壁作为抗蛋白质吸附涂层,这种涂层不仅能成功分离多种蛋白质的混合物(如溶菌酶、细胞色素C、核糖核酸酶A和α-胰凝乳蛋白酶原A),而且在定量检测奶粉中三聚氰胺、乳铁蛋白的过程中,能阻抗其他蛋白质的非特异性吸附,提高了毛细管电泳对奶粉中三聚氰胺、乳铁蛋白的检测效率。二是将其与具有刺激响应性的聚合物(如聚丙烯酸)构成二元混合刷涂层,在一定的pH和离子强度条件下,涂层可吸附目标蛋白质(如牛血清白蛋白、溶菌酶),在另一pH和离子强度条件下可将吸附的目标蛋白质全部释放,同时在释放过程中,处于涂层表面的聚(2-甲基-2-■唑啉)会进一步阻止蛋白质的吸附,释放的蛋白质在电渗流和电泳的双重作用下快速迁移,到达检测器的蛋白质瞬时浓度大大增加,使目标蛋白质得到富集,目标蛋白质的检测信号得到放大,从而达到了提高低丰度蛋白质检测灵敏度的目的。此外,该文还对聚(2-甲基-2-■唑啉)在毛细管电泳分离蛋白质中的未来发展趋势进行了展望。     

无胶筛分毛细管电泳法检测微量蛋白质骨桥蛋白

采用非涂层毛细管,以150 mmol/L硼酸盐缓冲液为电泳缓冲液,30 g/L聚乙二醇(PEG)20000为筛分介质,经对分离条件进行优化,成功地建立了用无胶筛分毛细管电泳检测微量蛋白质的方法。用所建立的方法测定骨桥蛋白,其批内、批间迁移时间的相对标准偏差均小于5%,回收率大于95%,被检测样品中骨桥蛋白的含量与其峰面积呈良好的线性关系（相关系数为0.996）,最低检测限为0.079 g/L。考察了无血清饥饿培养对血管平滑肌细胞分泌骨桥蛋白的影响,结果表明无血清饥饿培养24 h骨桥蛋白的合成与分泌达到高峰,此后随时间延长含量随之降低,此结果与采用Western blot方法检测的结果一致。该方法具有进样量小（nL级)、检测速度快、可自动化等优点,是一种简便、快捷的检测微量蛋白质的好方法。     

毛细管电泳发光二极管诱导荧光对免疫球蛋白G的检测

采用自行设计、组装的毛细管电泳光导纤维发光二极管诱导荧光检测装置,建立了一种直接测定免疫球蛋白G(IgG)的方法。以蓝色发光二极管(LED)为荧光检测器的激发光源,荧光素异硫氰酸酯(FITC)为柱前衍生试剂,采用毛细管区带电泳,以20 mmol/L硼砂缓冲溶液(pH9.2)为背景电解液进行分离检测。通过对衍生反应条件和电泳分离条件进行优化,确定了最佳实验条件,在该条件下,IgG的线性范围为4.5×10-8~1.2×10-6g/L,检出限为2.0×10-8g/L。该方法简单、高效、选择性好,无需前处理,可用于人血清中IgG含量的测定。     

Design and evaluation of capillary coupled with optical fiber light‐emitting diode induced fluorescence detection for capillary electrophoresis

A new detector, capillary coupled with optical fiber LED‐induced fluorescence detector (CCOF‐LED‐IFD, using CCOF for short), is introduced for CE. The strategy of the present work was that the optical fiber and separation capillary were, in the parallel direction, fastened in a fixation capillary with larger inner diameter. By employing larger inner diameter, the fixation capillary allowed the large diameter of the optical fiber to be inserted into it. By transmitting an enhanced excitation light through the optical fiber, the detection sensitivity was improved. The advantages of the CCOF‐CE system were validated by the detection of riboflavin, and the results were compared to those obtained by the in‐capillary common optical fiber LED‐induced fluorescence detector (IC‐COF‐LED‐IFD, using COF for short). The LODs of CCOF‐CE and COF‐CE were 0.29 nM and 11.0 nM (S/N = 3), respectively. The intraday (n = 6) repeatability and interday (n = 6) reproducibility of migration time and corresponding peak area for both types of CE were all less than 1.10 and 3.30%, respectively. The accuracy of the proposed method was judged by employing standard addition method, and recoveries obtained were in the range of 98.0–102.4%. The results indicated that the sensitivity of the proposed system was largely improved, and that its reproducibility and accuracy were satisfactory. The proposed system was successfully applied to separate and determine riboflavin in real sample.     

Determination of agmatine in biological samples by capillary electrophoresis with optical fiber light-emitting-diode-induced fluorescence detection

A capillary electrophoresis (CE)/optical fiber light-emitting diode (LED)-induced fluorescence detection method is developed for the determination of agmatine in biological samples. The agmatine was precolumn-derivatized with fluorescence tagging reagent, fluorescein isothiocyanate (FITC). Optimal separation and determination for agmatine were obtained with an electrophoretic buffer of 20 mM sodium borate (pH 9.2). Under the optimal conditions, the determination of agmatine was achieved in less than 4 min, and the detection limit was 4.1x10(-9) M (S/N = 3). The relative standard deviation (RSD) for 11 parallel determination of agmatine was less than 3.0%. The present CE-LED induced fluorescence detection method has been applied to detect agmatine in rat brain tissue, rat stomach tissue, human serum, and human urine. The level of agmatine in human urine was quantified by CE for the first time and found to be in the range 2.5-4.1x10(-7) M.     

Optical fiber light-emitting diode-induced fluorescence detection for capillary electrophoresis

A highly sensitive optical fiber light-emitting diode (LED)-induced fluorescence detector for CE has been constructed and evaluated. In this detector, a violet or blue LED was used as the excitation source and an optical fiber with 40 microm OD was used to transmit the excitation light. The upper end of the fiber was inserted into the separation capillary and was situated right at the detection window. Fluorescence emission was collected by a 40 x microscope objective, focused on a spatial filter, and passed through a cutoff filter before reaching the photomultiplier tube. Output signals were recorded and processed with a computer using in-house written software. The present CE/fluorescence detector deploys a simple and inexpensive optical system that requires only an LED as the light source. Its utility was successfully demonstrated by the separation and determination of amino acids (AAs) labeled with naphthalene-2,3-dicarboxaldehyde (NDA) and FITC. Low detection limits were obtained ranging from 17 to 23 nM for NDA-tagged AAs and 8 to 12 nM for FITC-labeled AAs (S/N=3). By virtue of such valuable features as low cost, convenience, and miniaturization, the presented detection scheme was proven to be attractive for sensitive fluorescence detection in CE.     

Dual wavelength excitation fluorescence detector for capillary electrophoresis using a pulsed bi-colour light emitting diode

A simple and novel two-colour fluorescence detector for capillary electrophoresis was created using a single bi-colour light emitting diode (LED), multi-band pass excitation and emission filters and a single detector. Excitation light from a blue/red (470/635 nm) bi-colour LED was filtered through a 390/482/563/640 nm multi-band bandpass filter, with emitted light filtered through a 446/523/600/677 nm multi-band bandpass filter before being detected using a photon counting detector. Sequential pulsing of the blue/red LED and deconvolution of the collected fluorescence data allowed extracted electropherograms to be obtained corresponding to excitation with the blue and red LEDs. Optimisation of the pulsed LED conditions revealed an optimum LED on-time of 50 ms, off-time of 30 ms with a pulsed current of 40 mA, giving an effective data acquisition rate of 6.25 Hz. The characteristics of this system were validated by the simultaneous separation and determination of six fluorescent dyes: fluorescein, FITC, coumarin 334, dibromo(R)fluorescein (Ex/Em 470/525 nm), and Cy 5 and the Agilent Bioanalyser DNA dye (Ex/Em 635/670 nm). Under optimum conditions, the detection limits for FITC, fluorescein and Cy 5 were 69 nM, 42 nM and 289 nM (S/N = 3), respectively. These were lower than those obtained with continuous operation of the individual wavelengths at a constant current of 20 mA, but were slightly higher than those obtained using dedicated single wavelength filter combinations designed specifically for use with these fluorophores. The intraday repeatability (n = 6) of migration times was less than 1.0% and less than 3.4% for peak areas, while interday (n = 3) migration time and peak area reproducibility were less than 0.9% and 3.6%, respectively. This simple detector is capable of performing quantitative two-wavelength excitation without the need for complex optics and light source configurations.     

HPLC with In-Capillary Optical Fiber Laser-Induced Fluorescence Detection of Picomolar Amounts of Amino Acids by Precolumn Fluorescence Derivatization with Fluorescein Isothiocyanate

In this paper, a fluorescein isothiocyanate (FITC) precolumn derivatization technique in conjunction with an HPLC-in-capillary optical fiber laser-induced fluorescence (HPLC-ICOF-LIF) detection method has been developed for determination of amino acids. The HPLC separation of FITC-labeled amino acids and the ICOF-LIF detection system are studied and optimized. Optimum separation conditions were obtained with a gradient elution program of acetonitrile and phosphate buffer (10 mM, pH 6.8). The ICOF-LIF detection system comprises a 530-??m capillary and a 380-??m optical fiber. The analyses of amino acids display excellent linear relationship between peak area and concentration with correlation coefficients greater than 0.999 and the method also provides good repeatability with RSD < 3%. The detection limits for FITC-tagged amino acids are very low and the lowest LOD for tyrosine is 51 pM. The proposed method has been successfully applied to determination of amino acids in human serum. Our developed HPLC-ICOF-LIF system is cheap, simple, stable, and sensitive which is potentially useful for the formulation analysis and bioanalysis.     

Enhancement of signal-to-noise level by synchronized dual wavelength modulation for light emitting diode fluorimetry in a liquid-core-waveguide microfluidic capillary electrophoresis system

The signal-to-noise level of light emitting diode (LED) fluorimetry using a liquid-core-waveguide (LCW)-based microfluidic capillary electrophoresis system was significantly enhanced using a synchronized dual wavelength modulation (SDWM) approach. A blue LED was used as excitation source and a red LED as reference source for background-noise compensation in a microfluidic capillary electrophoresis (CE) system. A Teflon AF-coated silica capillary served as both the separation channel and LCW for light transfer, and blue and red LEDs were used as excitation and reference sources, respectively, both radially illuminating the detection point of the separation channel. The two LEDs were synchronously modulated at the same frequency, but with 180°-phase shift, alternatingly driven by a same constant current source. The LCW transferred the fluorescence emission, as well as the excitation and reference lights that strayed through the optical system to a photomultiplier tube; a lock-in amplifier demodulated the combined signal, significantly reducing its noise level. To test the system, fluorescein isothiocyanate (FITC)-labeled amino acids were separated by capillary electrophoresis and detected by SDWM and single wavelength modulation, respectively. Five-fold improvement in S/N ratio was achieved by dual wavelength modulation, compared with single wavelength modulation; and over 100-fold improvement in S/N ratio was achieved compared with a similar LCW-CE system reported previously using non-modulated LED excitation. A detection limit (S/N = 3) of 10 nM FITC-labeled arginine was obtained in this work. The effects of modulation frequency on S/N level and on the rejection of noise caused by LED-driver current and detector were also studied.     

毛细管电泳/发光二极管诱导荧光法测定麻黄中麻黄碱与伪麻黄碱含量

基于麻黄碱及伪麻黄碱衍生物的光谱及化学性质,设计并构建了毛细管电泳/发光二极管诱导荧光检测系统.对关键光学元件进行组合选择,以蓝光发光二极管为光源,BP 470和BP 530分别为光源滤光片和荧光滤光片,光电倍增管检测信号,并对电泳分离系统的缓冲溶液、分离电压等参数进行优化;以FITC为衍生试剂,10 mmol/L Na2B4O7+ 16 mmol/L SDS为缓冲溶液,12 kV电压下可实现麻黄中麻黄碱和伪麻黄碱的基线分离.在0.25～10 mg/L范围内,麻黄碱和伪麻黄碱标准溶液的质量浓度与荧光响应的峰高之间呈较好的线性关系,相关系数(r)均大于0.99,其检出限分别为0.38 μg/L和0.29 μg/L,峰高的日内重复性(RSD)分别为2.0％和2.2％,日间重复性(RSD)分别为5.4％和5.1％.将该方法用于中药麻黄中麻黄碱和伪麻黄碱的测定,加标回收率分别为94％和107％.