基于自组装L-半胱氨酸与纳米金的H2O2生物传感器

通过在金电极表面自组装L-半胱氨酸,再分别吸附纳米金与辣根过氧化物酶(HRP)的方法,成功的制备了H2O2生物传感器.采用循环伏安法考察了传感器的电化学特性,电极对H2O2在浓度为2.1×10-6～3.6×10-3 mol/L的范围内呈线性,检出限为8.9×10-7 mol/L (S/N＝3).该传感器具有稳定性好,线性范围宽,检出限低等优点,同时具有一定的抗干扰能力.     

普鲁士蓝和苝四甲酸二酐衍生物膜修饰的过氧化氢生物传感器

以玻碳电极(GCE)为基底,采用恒电位法沉积一层普鲁士蓝(PB),然后将苝四甲酸二酐衍生物(PTC-NH2)自组装到其表面,形成既带氨基功能团,又可有效防止PB渗漏的导电膜.通过静电吸附和共价键合作用固定纳米金和辣根过氧化物酶(HRP)的复合物,从而制得性能优良的过氧化氢(H2O2)生物传感器.采用循环伏安法(CV)和计时电流法,考察了传感器的电化学性能.实验表明,本传感器具有灵敏度高、线性范围宽、检出限低、稳定性好、抗干扰能力强等特点.其线性范围为2.0×10-6～1.4×10-3mol/L;检出限为8.3×10-7mol/L(S/N=3).     

DNA-HRP/聚L-酪氨酸共修饰电极的制备及其电化学性能的研究

以聚L-酪氨酸膜为载体,固载DNA和辣根过氧化物酶(HRP)制备过氧化氢生物传感器.该传感器对H2O2表现出良好的催化还原特性,具有灵敏度高,稳定性好且易于制作等特点.其线性响应范围为: 2.0×10-6～1.1×10-2 mol/L,检出限为8.0×10-7 mol/L (S/N=3).     

DNA-HRP/聚M-酪氨酸共修饰电极的制备及其电化学性能的研究

以聚L-酪氨酸膜为载体,固载DNA和辣根过氧化物酶(HRP)制备过氧化氢生物传感器.该传感器对H2O2表现出良好的催化还原特性,具有灵敏度高,稳定性好且易于制作等特点.其线性响应范围为:2.0×10-6～1.1×10-2 mol/L,检出限为8.0×10-7 mol/L (S/N=3).     

镀铂金电极上电沉积碳纳米管-葡萄糖氧化酶-壳聚糖的新型生物传感器

通过电化学沉积将壳聚糖、葡萄糖氧化酶和碳纳米管固定到镀铂金电极上,制备了一种新型葡萄糖生物传感器.探讨了铂的电沉积时间、壳聚糖化学沉积时间、缓冲溶液pH和工作电位等对该牛物传感器的影响.实验结果表明,该生物传感器线性范围为1×10~(-6)1.2×10~(-2)mol/L,相关系数为0.9974,检测限为5.0×10~(-7)mol/L,响应时间≤8 s;血清中的尿酸、抗坏血酸等对葡萄糖的测定无干扰.利用该生物传感器测定了人血清中的葡萄糖,回收率在97%～105%之间.该生物传感器线性范围较宽,灵敏度高,响应迅速,抗干扰能力强,有望成为一种可推广的新型葡萄糖检测器.     

石墨烯-聚多巴胺纳米复合材料制备过氧化氢生物传感器

通过合成具有仿生功能的石墨烯-聚多巴胺纳米材料,将其与辣根过氧化酶组装到电极表面,以对苯二酚为电子媒介体制备H2O2传感器.此修饰电极对H2O2具有良好的电催化活性,检测的线性范围为5.0×10-7～3.3×10-4 mol/L;线性回归方程为Y=29.69x+ 0.04577,相关系数为R=0.9995;检出限为3.7×10-7 mol/L(S/N=3).     

层层自组装制备基于多壁碳纳米管的胆碱生物传感器

以经混酸处理的多壁碳纳米管(MWCNTs)修饰铂(Pt)电极,在此基础上固定(PAA/PVS)3复合膜,采用层层自组装技术将高分子聚电解质PDDA与胆碱氧化酶交替组装在已修饰的电极上,构建了电流型胆碱生物传感器。实验结果表明,MWCNTs的引入使电极对H2O2的催化电流明显增大,制成的酶电极可以有效控制酶量的使用,酶膜组装层数为8时最优,对胆碱的线性响应范围为5×10-7～1×10-4mol/L;灵敏度为12.53μA/mmol;响应时间为7.60s;检出限为2×10-7mol/L(S/N=3)。传感器的抗干扰能力强,稳定性好,30d时的响应电流值仍保持最初的89.5%。3次平行实验的RSD为3.64%。     

明胶固定辣根过氧化物酶制备H_2O_2传感器

用明胶将辣根过氧化物酶(HRP)固定于多壁碳纳米管(MWNT)和茜素红(AR)修饰的玻碳(GC)电极上,制成HRP生物传感器(HRP/AR/MWNT/GC),然后在3%戊二醛(GA)中进行交联改性,以克服明胶膜易溶胀的缺点,并提高膜的稳定性.同时详细探讨了该传感器对H2O2的响应性能,并优化了实验条件.结果表明,该传感器对H2O2的线性响应范围为5.0×10-6～1.0×10-3mol/L,线性相关系数为0.9932,检出限为1.0×10-7mol/L,且放于4℃环境30d后,峰电流值约为原来的72.1%.该传感器响应快速,灵敏度高,且具有良好的重现性、稳定性及较长的使用寿命,具有潜在的应用价值.     

一种用于测定尼古丁的新型压电石英晶体传感器的研制

本文将含有四苯硼钠的聚氯乙烯(PVC)敏感膜涂渍在压电石英晶体(PQC)表面,制成尼古丁传感器,该传感器在pH 5.0~7.5的范围内,对1.0×10-6~1.0×10-2mol/L的尼古丁水溶液有很好的线性响应,检出限为8.0×10-7mol/L。本法较紫外分光光度法有更宽的线性范围和更低的检出限。     

基于Nafion-聚苋菜红-石墨烯纳米复合膜修饰玻碳电极的一氧化氮生物医学传感

通过简单可控的滴涂成膜法和电聚合法,将Nafion-聚苋菜红-石墨烯纳米复合膜固定于玻碳电极表面,构建了一种新型NO生物医学传感界面。电化学表征表明,纳米复合膜对于NO的电化学氧化具有良好的催化效应。借助于电子扫描显微镜技术和电化学交流阻抗技术对纳米复合膜的电催化机理进行了探讨,并对传感器的性能进行了考察。结果表明,该传感器具有较宽的线性范围(1.0×10~(-7)～5.1×10~(-4) mol/L),检出限低至1.8×10~(-8) mol/L。方法具有重现性好、稳定性好、灵敏度高以及抗干扰能力强等优点。将该传感器应用于小鼠母瘤神经细胞释放NO的监测,取得了令人满意的结果。     

Solvent extraction separation of In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/ with sulphoxides

Solvent extraction studies have been made on some metals: In/III/-Tl/III/ and Hg/II/-Cd/II/-Co/II/, from ammonium thiocyanate solutions by dialkyl sulphoxides. Separation of these metals from one another can be achieved by suitable choice of the extracted conditions. The nature of the extractable metal species has been elucidated.     

Synthesis of chlorobis/β-diketonato/oxotechnetium/V/ and tris/β-diketonato/technetium/III/ complexes

Chlorobis/-diketonato/ oxotechnetium/V/ complexes [TcOCl/-dik/₂, -diketone=acetylacetone, benzoylacetone and dibenzoylmethane] were newly synthesized using macroamount of⁹⁹Tc. These complexes were further separated into geometrical isomers. Furthermore, an improvement of the yields for the syntheses of tris/-dike-tonato/technetium/III/ complexes [Tc/-dik/₃, -diketone=acetylacetone, benzoylacetone and 2-thenoyltrifluoroacetone] was examined using Tc/III/-thiourea complexes as a starting material.     

Simultaneous propane dehydrogenation andco2hydrogenation overCrOx/SiO2catalyst

Summary Single reverse water-gas shift (RWGS) and dehydrogenation of propane with CO₂(DH-CO₂) reactions in the presence and absence of the CrO_x/SiO₂ catalyst have been studied between 673 and 873 K. It was found that the CrO_x/SiO₂ catalyst is active both in the dehydrogenation of propane and in the RWGS reactions. The obtained results suggest that the dehydrogenation of propane to propene in the presence of CO₂on CrO_x/SiO₂can be facilitated by the RWGS reaction.</o:p>     

Direct synthesis of dimethyl carbonate ?from CH3OH AND CO2 by H3PW12O40/CexTi1-xO2 catalyst

Summary Ce_xTi_1-xO₂ and H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts were prepared using a sol-gel method, and applied to the direct synthesis of dimethyl carbonate from methanol and carbon dioxide. H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ showed a better catalytic performance than the corresponding Ce_xTi_1-xO₂, due to the bifunctional catalysis of Br?nsted acid sites (provided by H₃PW₁₂O₄₀) and base sites (provided by Ce_xTi_1-xO₂). H₃PW₁₂O₄₀/Ce_0.1Ti_0.9O₂ showed the highest catalytic performance among the H₃PW₁₂O₄₀/Ce_xTi_1-xO₂ catalysts.     

Crystal structure of Na3PO4 · 12H2O

The crystal structure of trisodium monophosphate hemihydrate was determined. The space group is $\text{C2}\text{c}$ and a unit cell contains eight formula units. The unit cell dimensions of $\text{Na}{}_3\text{PO}{}_4\text{·}\text{1}\text{2}\text{H}{}_2\text{O}$ are a = 9.631(3), b = 5.416(2), c = 16.938(8) Å, β = 102.60(5)°. The final R value is 0.027 for a set of 1430 independent reflections. This atomic arrangement is mainly a three-dimensional network of distorted NaO₆ octahedra. The hydrogen bonding scheme is given.     

LixNi0.8-yCo0.2ZnyOp的合成及电化学性能研究

A series of single-phase Li_xNi_0.8-yCo_0.2Zn_yO_p(0.96 ≤x≤ 1.10， 0 ≤y≤ 0.05， 2 ≤p≤ 2(1+y) ) (different in the y values) were synthesized by a two-step solid state reaction method， in which LiOH·H₂O， Zn-doped spherical Ni(OH)₂ and Co₂O₃ were used as the precursors. The ICP-AES analyses proved that the Zn-doped compounds synthesized had the nonstoichiometric form. The results of the XRD， SEM identified that the uniform particles of the as-prepared materials having a good layered structure were fine， narrowly distributed and well crystallized. The electrochemical performance test was carried out and the results showed that the as-prepared Zn-doped materials had not only a high capacity， but also a better cycling stability characterization than the un-doped one. The Li_1.06Ni_0.75Co_0.22Zn_0.03O_2.03 material has an initial reversible capacity as high as 160.5mAh·g^-1; and a first discharge efficiency 89.2%， and exhibits satisfactory cyclic stability with 90% retainable capacity after 50 cycles.     

An investigation of the promotional effect of propylene or propane traces on the activity of sulfatedPt/g-Al2O3andPt-Sn/g-Al2O3inCH4combustion

Summary A strong promoting effect of the presence of C₃H₈or C₃H₆was determined for the combustion of CH₄in excess oxygen, over pre-sulfated 1%Pt/g-Al₂O₃and pre-sulfated 1%Pt-2%Sn/g-Al₂O₃catalysts.</o:p>     

Synthesis and characterization of Ti1−2xNbxNixO2−x/2 solid solutions

Doped-rutile has been traditionally used in ceramic pigments for its intense optical properties. In this paper, we compare the classical ceramic synthesis of Ti_1−2xNb_xNi_xO_2−x/2 system with the sol-gel methodology, which allows a reduction of the anatase-rutile transformation temperature. The composition was optimised in order to obtain a unique rutile phase with the minimum amount of pollutant Ni(II) and enhanced chromatic coordinates. Incorporation of the doping ions in the rutile structure was corroborated by XRD and Rietveld refinements. The species responsible for the colour mechanism were studied by different techniques. UV-VIS spectroscopy showed the characteristic features of Ni²⁺ ions, whose existence was corroborated by EPR and magnetic measurements. From these results, (Ni,Nb)doped-TiO₂ powder samples can be now shaped as thin films, monoliths, etc. by using sol-gel methodology without modifying their properties. This study introduces new possibilities of coloured TiO₂-based solid solutions in new combined advanced applications (colouring agent and photocatalyst, etc.).     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

LixZryOz三元化合物的制备及表征

采用高温固相法制备了4种高纯度晶相组成的LixZryOz三元化合物,研究了焙烧温度、时间、反应物的种类和初始反应物物质的量比对产物组成的影响,进一步用XRD、SEM及BET分析方法对产物的晶相结构、表面形貌及比表面积进行了表征.实验结果表明,Li2CO3与ZrO2在适当条件下可以合成得到单斜相Li3ZrO3;以LiOH替代Li2CO3,在适当条件下可以分别合成得到四方相Li2ZrO3和三斜/单斜相Li6Zr2O7;进一步以Zr(NO3)4·5H2O代替Zr02,可将单斜相Li6Zr2O7的制备时间由96 h缩短至24 h.SEM照片显示产物硬团聚明显,粒径分布在1～10μm间,BET分析表明样品比表面积处于1.0～9.0 m2·g-1间分布,反应过程中锂的过量以及长时间高温焙烧是引起产物粒径长大和产生硬团聚的主要原因.