Modified thermal evaporation process using GeO2 for growing ZnO structures

In the current work, zinc oxide (ZnO) nano/microstructures are synthesized using a modified thermal-evaporation process by introducing germanium oxide (GeO₂) powder mixed with metallic Zn powder as the raw material. Without the use of any catalyst and oxygen flow in the furnace system, GeO₂ is utilized to provide an oxygen source for the growth of ZnO structure. The samples are treated by different temperatures ranging from 500 to 900 °C. Morphology, phase structure, and photoluminescence properties are investigated by scanning electron microscopy (SEM), X-ray diffractometer (XRD) and photoluminescence (PL) spectrometer. The structures and morphologies of the samples were found to vary with growth temperature. The XRD diffraction peaks show that the films grown at temperature from 600 to 800 °C consist of hexagonal wurtzite ZnO structures. Room-temperature PL measurement revealed ZnO spectra representing two bands: near-band-edge emission in the ultraviolet (UV) region and broad deep-level emission centered at about 500 nm. The strong UV emission in the PL spectra indicates that the GeO₂ supplies sufficient oxygen for formation of ZnO structures with few oxygen vacancies. The growth mechanism and the roles of GeO₂ for formation of ZnO structures are discussed in detail.     

溅射制备纳米晶GaN∶Er薄膜的室温发光特性

利用直流磁控共溅射方法制备了GaN:Er薄膜.X射线衍射结果显示薄膜为纳米多晶结构,根据谢乐公式,计算得到了GaN薄膜晶粒的平均大小为58nm;透射电子显微镜结果显示为非晶基质中镶嵌了GaN纳米颗粒,尺寸在6—8nm之间;紫外可见谱结果表明在500—700nm的可见光范围内,薄膜的平均透过率大于80%,在紫外可见谱基础上,利用Tauc公式计算得到了纳米晶GaN薄膜的光学带隙为322eV;最后,测量了GaN:Er薄膜的室温光致发光谱,获得了Er³⁺离子在554nm处的强烈绿光发射. 关键词： 纳米晶GaN薄膜 3+掺杂')" href="#">Er³⁺掺杂 光学带隙 光致发光     

制备一维可控形貌的ZnO微米棒

用化学溶液法以醋酸锌和六亚甲基四胺为原料在玻璃衬底上生长出不同形貌的亚微米和微米ZnO棒。探讨了反应液的酸碱度和反应液浓度对生成的ZnO棒形貌的影响，并分析了其生长机制。通过控制一定的酸碱度和溶液浓度，可以得到规则的六角ZnO棒状阵列。这种规则的六角棒沿着[002]方向生长。测量了样品的XRD，扫描电镜像(SEM)，并对其发光性能进行了测量分析。其中规则六角ZnO棒的光致发光光谱中有一很强的峰值650nm红色宽谱带和一峰值约387nm的激子发光峰。激子发光峰加宽，实际上是自由激子的发光峰(380nm)和Zni的发光峰(430nm)的叠加。而红色发光峰可能是Vo2+中的电子和价带中的空穴辐射复合所致。     

Influence of annealing temperature on structural, optical and magnetic properties of Zn0.95Cu0.02Cr0.03O powders

Zn_0.95Cu_0.02Cr_0.03O powders have been synthesized by the sol-gel method and sintered in argon atmosphere under different temperatures. The structural, optical and magnetic properties of the powders were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), photoluminescence (PL) and vibrating sample magnetometer (VSM). The XRD results demonstrated that Cr and Cu ions are incorporated into ZnO successfully when annealing temperatures were 600 and 700 °C. But when the samples were annealed at 500 °C, the crystallinity of the samples was not very good. However, when the annealing temperature was increased to 800 °C, the secondary phase of Cu and ZnCr₂O₄ appeared in the samples. The PL spectra revealed that the position of the ultraviolet (UV) emission peak of the samples showed a blue shift and the green emission peak enhanced significantly with the annealing temperature increasing from 600 to 700 °C. Magnetic measurements indicated that the room temperature ferromagnetism of Zn_0.95Cu_0.02Cr_0.03O was intrinsic in nature. In addition, the saturation magnetization (Ms) increased from 0.0078 to 0.0088 emu/g with the annealing temperature increased from 600 to 700 °C.     

Modifications induced by gamma irradiation upon structural,optical and chemical properties of polyamide nylon-6,6 polymer

The effects of gamma rays were studied on the optical, structural and chemical properties of the PA-66 polymer samples. The polymer samples obtained from Goodfellow (Cambridge, UK) were irradiated with gamma rays at various doses ranging from 100 to 1250 kGy. The pristine and gamma rays irradiated samples were characterized by UV–visible (UV–VIS) spectroscopy, X-ray diffraction (XRD) and Fourier transform infrared (FTIR) spectroscopy. UV–VIS shows a shift in absorption toward the visible region for irradiated samples and a decrease in band gap energy (E_g). The XRD analyses show an increase in the crystalline nature of the polymer at higher doses as a result of significant decrease in the peak width of XRD patterns. The FTIR spectra show decrease in intensity and shift of various bands with increase in gamma dose.     

Crystalline and photoluminescence characteristics of YVO4:Sm thin films grown by pulsed laser deposition under oxygen pressure

YVO₄:Sm³⁺ films were deposited on Al₂O₃ (0 0 0 1) substrates at various oxygen pressures changing from 13.3 to 46.6 Pa by using the pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by means of X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. The XRD pattern confirmed that YVO₄:Sm³⁺ film has zircon structure and the AFM study revealed that the films consist of homogeneous grains ranging from 100 to 400 nm. The room temperature photoluminescence (PL) spectra showed that the emitted radiation was dominated by a reddish-orange emission peak at 602 nm radiating from the transition of (⁴G_5/2→⁶H_7/2). The crystallinity, surface morphology, and photoluminescence spectra of thin-film phosphors were highly dependent on the deposition conditions, in particular, the substrate temperature. The surface roughness and photoluminescence intensity of these films showed similar behavior as a function of oxygen pressure.     

PHOTO- AND ELECTRO-LUMINESCENCE FROM HYDROGENATED AMORPHOUS SILICON CARBIDE FILMS PREPARED BY USING ORGANIC CARBON SOURCE

Hydrogenated amorphous silicon carbide (a-SiC:H) films were grown by using an organic source, xylene (C₈H₁₀), instead of methane (CH₄) in a conventional plasma enhanced chemical vapor deposition system. The optical band gap of these samples was increased gradually by changing the gas ratio of C₈H₁₀ to SiH₄. The film with high optical band gap was soft and polymer-like and intense photoluminescence were obtained. Room temperature electro-luminescence was also achieved with peak energy at 2.05 eV (600 nm) for the a-SiC:H film with optical band gap of 3.2 eV.     

Preparation and luminescent characteristic of Li3NbO4 nanophosphor

Synthesis and luminescence properties of Li₃NbO₄ oxides by the sol-gel process were investigated. The products were characterized by the X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy and absorption spectra. The PL spectra excited at 247 nm have a broad and strong blue emission band maximum at 376 nm, corresponding to the self-activated luminescence of the niobate octahedra group [NbO₆]⁷⁻. The optical absorption spectra of the samples sintered at temperatures of 600 and 700 °C exhibited the band-gap energies of 4.0 and 4.08 eV.     

Luminescent properties of Dy doped SrMoO4 phosphor

Trivalent dysprosium ions (Dy³⁺) doped strontium molybdate (SrMoO₄) phosphors were synthesized by solid-state reaction and their photoluminescence (PL) properties were investigated. X-ray powder diffraction (XRD) analysis confirmed the formation of SrMoO₄:Dy³⁺. PL measurements indicated that the phosphor exhibited intense emission at 482, 490 (⁴F_9/2→⁶H_15/2) and 575 nm (⁴F_9/2→⁶H_13/2) under UV excitation. The effect of the doping concentration of Dy³⁺in SrMoO₄:Dy³⁺ on the PL was investigated in detail. Na⁺ ion was a good charge compensator for SrMoO₄:Dy³⁺.     

Synthesis and characterization of tin oxide (SnO2) nanocrystalline powders by a simple modified sol–gel route

This paper reports the synthesis and characterization of nanocrystalline tin oxide (SnO₂) powders by a simple method using a chitosan–polymer complex solution. To obtain SnO₂ nanocrystalline powders, the precursor was calcined at 500–600 °C in air for 2 h. The phase composition of calcined samples was studied by X-ray diffraction (XRD). The XRD results confirmed the formation of a SnO₂ phase with tetragonal structure. The particle sizes of the powder were found to be 22–23 nm as evaluated by the XRD line broadening method. TEM investigation revealed that the SnO₂ samples consist of crystalline particles of 19–21 nm. The corresponding selected area electron diffraction analysis further confirmed the formation of the tetragonal structure of SnO₂ without any impurity phases. The optical properties of the samples were explored by Fourier transform infrared spectroscopy, optical absorption and Raman studies. The estimated band gaps of the samples were in the range of 3.44–3.73 eV.     

Photoluminescence studies of NaCaPO4:RE (RE=Dy, Mn or Gd)

The purpose of the present study is to develop an understanding of photoluminescence properties of Dy³⁺, Mn²⁺ or Gd³⁺doped NaCaPO₄ phosphors, which have served as efficient phosphors in many industrial applications. The phase formation was confirmed by the X-ray powder diffraction (XRD) measurement. Photoluminescence (PL) excitation spectrum measurement of NaCaPO₄:Dy³⁺ shows this phosphor can be efficiently excited by near-ultraviolet (UV) light from 300 to 400 nm and presents dominant luminescence band centered at 480 nm (blue) and 573 nm (yellow). The PL excitation of NaCaPO₄:Mn²⁺ and Gd³⁺ under UV wavelength shows the emissions at 520 and 313 nm, respectively. A scanning electron microscope (SEM) shows an average crystallite size in sub-micrometer range. The obtained results show that the phosphors have the potential for application in the lamp industry and medical applications.     

Modification of the structural and optical properties of tin oxide nanoparticles by Co doping and thermal annealing

Enhancement of the UV photoluminescence emission of sol–gel synthesized tin oxide nanoparticles is achieved by a combination of thermal annealing and Co doping. The UV as well as the defect-related visible photoluminescence are correlated to the structural characteristics and surface Sn(OH)₂ content. The nanoparticle structure, size, crystallinity, and Sn(OH)₂ content are monitored by a combination of X-ray diffraction, transmission electron microscopy, and Raman spectroscopy. In the undoped powders, a suitable annealing leads to a significant UV luminescence at around 365 nm. After doping with Co and annealing, the UV emission is further enhanced. The improvement in the UV emission intensity following annealing and Co doping of SnO₂ is demonstrated to be due to a reduction in the hydroxyl content. The defect-related broad visible photoluminescence (～400–650 nm) can be deconvoluted into three bands at around 440 nm (blue), 510 nm (green), and 600 nm (orange). The green emission is related to Sn(OH)₂ determined by Raman spectroscopy. The blue and orange emissions are attributed to oxygen vacancies.     

Synthesis and luminescent properties of nanoparticles GdCaAl3O7:RE (RE=Eu, Tb) via the sol-gel method

By using metal nitrates as starting materials and citric acid as complexing agent, GdCaAl₃O₇:Eu³⁺ and GdCaAl₃O₇:Tb³⁺ powder phosphors were prepared by a citrate-gel method. Thermal analysis (TG-DTG), X-ray diffraction (XRD), transmission electron microscope (TEM) and scanning electron microscope (SEM), photoluminescence excitation and emission, as well as kinetic decays were employed to characterize the resulting samples. The results of the XRD indicated the precursor samples began to crystallize at 800 °C and the crystallinity increased with elevation the annealing temperature. TEM images showed that the phosphor particles were basically of spherical shape, with good dispersion about a particle size of around 40-70 nm. Upon excitation with UV irradiation, it is shown that there is a strong emission at around 617 nm corresponding to the forced electric dipole ⁵D₀-⁷F₂ transition of Eu³⁺, and at around 543 nm corresponding to the ⁵D₄-⁷F₅ transition of Tb³⁺. The dependence of photoluminescence intensity on Eu³⁺ (or Tb³⁺) concentration and annealing temperature were also studied in detail.     

Preparation and Photoluminescence of Sm <Superscript>3+</Superscript> Doped YAlO <Subscript>3</Subscript> Phosphor

YAlO₃: Sm³⁺ phosphor has been synthesized by the solid state reaction method with calcium flouride used as a flux. The resulting YAlO₃: Sm³⁺ phosphor was characterized by X-ray diffraction (XRD) technique, Fourier transmission infrared spectroscopy (FTIR), photoluminescence . . PL excitation spectrum was found at 254,332,380,400,407, 603 and 713 nm. Under excitation of UV(713 nm) YAlO₃: Sm³⁺ (0–3 %) broad band emission were observed from 400 to 790 nm with a maximum around 713 nm of YAlO₃ host lattice accompanied by weak emission of Sm³⁺ (⁴G_5/2 – ⁶H_5/2, ⁶H_7/2,⁶H_9/2) transitions. The results of the XRD show that obtained YAlO₃: Sm³⁺ phosphor has a orthorhombic structure. The study suggested that Sm³⁺ doped phosphors are potential luminescence material for laser diode pumping and inorganic scintillators.     

White-light emission from Li<Subscript>2</Subscript>Sr<Subscript>1−3<Emphasis Type="Italic">x</Emphasis>/2</Subscript>Dy<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>SiO<Subscript>4</Subscript> phosphors

Li₂Sr_1−3x/2Dy _x SiO₄ phosphors were synthesized at 900°C in the normal atmosphere by a solid-state method. The synthesized phosphors were characterized by X-ray powder diffraction (XRD) and photoluminescence (PL) spectra. The photoluminescence excitation (PLE) spectra show excitation peaks ranging from 300 to 400 nm due to the 4f-4f transitions of Dy³⁺. This mercury-free excitation is useful for solid-state lighting and light-emitting diodes (LEDs). The predominant emission of Dy³⁺ ions under 349 nm excitation is observed at 479 nm (blue) due to the ⁴F_9/2→⁶H_15/2 transitions and 572 nm (yellow) due to ⁴F_9/2→⁶H_13/2 transitions, respectively. The PL results reveal that the optimal concentration of the Dy³⁺ ions in Li₂Sr_1−3x/2Dy _x SiO₄ phosphors is x=0.03 mol. The nature of the resonance energy transfer for the Dy³⁺ ions is confirmed by Huang’s rule. Simulation of the white light excited by 349 nm near-ultraviolet (n-UV) light is also performed for its potential for white LEDs.     

Photoluminescence and optical characterization of CdS nanoparticles prepared by solid-state method at low temperature

The photoluminescence (PL) and optical properties of CdS nanoparticles prepared by the solid-state method at low temperature have been discussed. The effects of NaCl and anionic surfactant SDBS (sodium dodecylbenzene sulfonate) on the luminescent properties of CdS nanophosphors prepared using this method, without the inert gas or the H₂S environment, were studied separately. The synthesized products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscope (FESEM), and energy dispersive X-ray spectroscopy (EDAX). UV–VIS absorption and PL spectra were also studied. XRD studies confirmed the single-phase formation of CdS nanoparticles. TEM micrograph revealed the formation of nearly spherical nanoparticles with a diameter of 2.5 nm. The PL emission for the CdS shows the main peak at 560 nm with a shoulder at 624 nm, with an increase in the PL intensity after the addition of SDBS. The effect of Mn doping on PL intensity has also been investigated. The PL spectra show that the emission intensity decreases as the dopant concentration increases.     

掺纳米锗氧化硅的发光性能研究

由溶胶/凝胶法制备得到的GeO₂/SiO₂玻璃在700 ℃的条件下经H₂还原,得到具有奇特光致发光性质的Ge/SiO₂玻璃,该玻璃在室温条件下用246 nm（5.01 eV）的光激发时,能发射出很强的 392 nm（3.12 eV）、较强的 600 nm（2.05 eV）和次强的770 nm（1.60 eV） 的荧光.利用X射线衍射（XRD）、X射线光电子能谱（XPS）及透射电镜（TEM）实验证明,该玻璃能够发射3种不 关键词： 2')" href="#">Ge/SiO₂ Ge纳米晶粒 溶胶/凝胶法 光致发光     

Effect of the reaction conditions on the formation of the ZnO nanostructures

ZnO nanorods were synthesized through a simple chemical method by reacting Zn(C₂H₃O₂)₂·2H₂O and NaOH at low temperature and the effects of changing the order of addition of reactants on the morphological evolution of ZnO nanorods were investigated. The samples were characterized by using XRD, SEM, EDX, TEM, BET and Raman techniques. Optical properties of the ZnO nanostructures were too investigated by UV–Vis spectroscopy at room temperature.The hexagonal wurtzite phase of ZnO was confirmed by X-ray diffraction (XRD) for all the samples. SEM and TEM analysis indicated that different morphologies were obtained by changing the order of addition of reactants.     

A promising red-emitting phosphor for white-light-emitting diodes prepared by a modified solid-state reaction

Using urea, boric acid and polyethylene glycol (PEG) as auxiliary reagents, the novel red-emitting phosphors Ca₁₉Zn₂ (PO₄)₁₄:Eu³⁺ have been successfully synthesized by a modified solid-state reaction. Thermogravimetric (TG) analysis, X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) spectra were used to characterize the resulting phosphors. The dependence of the photoluminescence properties of Ca₁₉Zn₂ (PO₄)₁₄:Eu³⁺ phosphors upon urea, boric acid and PEG concentration and the quadric-sintered temperature were investigated. Luminescent measurements showed that the phosphors can be efficiently excited by ultraviolet (UV) to visible region, emitting a red light with a peak wavelength of 616 nm. The material has potential application as a fluorescent material for ultraviolet light-emitting diodes (UV-LEDs).     

Synthesis and luminescence properties of Tb:NaGd(WO4)2 novel green phosphors

Tb³⁺:NaGd(WO₄)₂ (Tb:NGW) phosphors with different Tb³⁺ concentrations have been synthesized by a mild hydrothermal process directly without further sintering treatment. X-ray diffraction (XRD), scanning electron microscope (SEM), photoluminescence excitation and emission spectra and decay curve were used to characterize the Tb:NGW phosphors. XRD analysis confirmed the formation of NGW with scheelite structure. SEM study showed that the obtained Tb:NGW phosphors appeared to be nearly spherical and their sizes ranged from 1 to 1.5 μm. The excitation spectra of these systems showed an intense broad band with maximum at 270 nm related to the O→W ligand-to-metal charge-transfer state. Photoluminescence spectra indicated the phosphors emitted strong green light centered at 545 nm under UV light excitation. Analysis of the photoluminescence spectra with different Tb³⁺ concentrations revealed that the optimum dopant concentration for Tb³⁺ is about 15 at% of Tb³⁺ ions in Tb:NGW phosphors.