A Trigger of Coupled Singularities

By using example of nonlinear dynamics of a pair of coupled gears, the phenomenon of appearance and disappearance of a trigger of coupled singularities and homoclinic orbits in the form of number eight in the phase portrait in the phase plane is investigated. That phenomenon is an accompanying phenomenon of loss of stability of the local unique equilibrium position. For a generalized case under certain conditions, a theorem of the appearance of a trigger of coupled singularities in a nonlinear dynamical conservative system, the first derivative of the system potential energy which is a product of two periodic functions with different periods, and one bifurcation parameter, which is the cause for the appearance of new roots of these two functions, is defined.     

On the localness of the spectral energy transfer in turbulence

By utilizing available experimental data for net energy transfer spectra for homogeneous turbulence, contributions P(, ) to the energy transfer at a wavenumber from various other wavenumbers are calculated. This is done by fitting a truncated power-exponential series in and to the experimental data for the net energy transfer T(), and using known properties of P(, ). Although the contributions P(, ) obtained by using this procedure are not unique, the results obtained by using various assumptions do not differ significantly. It seems clear from the results that for a region where the energy entering a wavenumber band dominates that leaving, much of the energy entering the band comes from wavenumbers which are about an order of magnitude smaller. That is, the energy transfer is rather nonlocal. This result is not significantly dependent on Reynolds number (for turbulence Reynolds numbers based on microscale from 3 to 800). For lower wavenumbers, where more energy leaves than enters a wavenumber band, the energy transfer into the band is more local, but much of the energy then leaves at distant wavenumbers.     

Impacts of local dispersion and first-order decay on solute transport in randomly heterogeneous porous media

Stochastic subsurface transport theories either disregard local dispersion or take it to be constant. We offer an alternative Eulerian-Lagrangian formalism to account for both local dispersion and first-order mass removal (due to radioactive decay or biodegradation). It rests on a decomposition of the velocityv into a field-scale componentv , which is defined on the scale of measurement support, and a zero mean sub-field-scale componentv _s , which fluctuates randomly on scales smaller than. Without loss of generality, we work formally with unconditional statistics ofv _s and conditional statistics ofv . We then require that, within this (or other selected) working framework,v _s andv be mutually uncorrelated. This holds whenever the correlation scale ofv is large in comparison to that ofv _s . The formalism leads to an integro-differential equation for the conditional mean total concentration c which includes two dispersion terms, one field-scale and one sub-field-scale. It also leads to explicit expressions for conditional second moments of concentration cc. We solve the former, and evaluate the latter, for mildly fluctuatingv by means of an analytical-numerical method developed earlier by Zhang and Neuman. We present results in two-dimensional flow fields of unconditional (prior) mean uniformv . These show that the relative effect of local dispersion on first and second moments of concentration dies out locally as the corresponding dispersion tensor tends to zero. The effect also diminishes with time and source size. Our results thus do not support claims in the literature that local dispersion must always be accounted for, no matter how small it is. First-order decay reduces dispersion. This effect increases with time. However, these concentration moments c and cc of total concentrationc, which are associated with the scale below, cannot be used to estimate the field-scale concentrationc directly. To do so, a spatial average over the field measurement scale is needed. Nevertheless, our numerical results show that differences between the ensemble moments ofc and those ofc are negligible, especially for nonpoint sources, because the ensemble moments ofc are already smooth enough.     

The problems of nonlinear bending for orthotropic rectangular plate with four clamped edges

（黄家寅）（秦圣立）ＴＨＥＰＲＯＢＬＥＭＳＯＦＮＯＮＬＩＮＥＡＲＢＥＮＤＩＮＧＦＯＲＯＲＴＨＯＴＲＯＰＩＣＲＥＣＴＡＮＧＵＬＡＲＰＬＡＴＥＷＩＴＨＦＯＵＲＣＬＡＭＰＥＤＥＤＧＥＳ￥ＨｕａｎｇＪｉａｙｉｎ;ＱｉｎＳｈｅｎｇｌｉ（ＱｕｆｕＮｏｒｍａｌＵｎ...     

Viscoelastic swirling flow with free surface in cylindrical chambers

The flow of a viscoelastic liquid driven by the steadily rotating bottom cover of a cylindrical cup is investigated. The flow field and the shape of the free surface are determined at the lowest significant orders of the regular domain perturbation in terms of the angular velocity of the bottom cap. The meridional field superposed on a primary azimuthal field shows a structure of multiple cells. The velocity field and the shape of the free surface are strongly effected by the cylinder aspect ratio and the elasticity of the liquid. The use of this flow configuration as a free surface rheometer to determine the first two Rivlin-Ericksen constants is shown to be promising.Nomenclature R, ,Z Coordinates in the physical domain D - , , Coordinates in the rest stateD ₀ - r, ,z Dimensionless coordinates in the rest stateD ₀ - Angular velocity - Zero shear viscosity - Surface tension coefficient - Density - Dimensionless surface tension parameter - ₁, ₂ The first two Rivlin-Ericksen constants - Stream function - Dimensionless second order meridional stream function - ^* Dimensionless second normal stress function - 2 Dimensionless sum of the first and second normal stress functions - N ₁,N ₂ The first and second normal stress functions - n Unit normal vector - D Stretching tensor - A _n nth order Rivlin-Ericksen tensor - S Extra-stress - u Velocity field - U Dimensionless second order meridional velocity field - V Dimensionless first order azimuthal velocity field - p Pressure - Modified pressure field - P Dimensionless second order pressure field - J Mean curvature - a Cylinder radius - d Liquid depth at rest - D Dimensionless liquid depth at rest - h Free surface height - H Dimensionless free surface height at the second order     

Asymptotic Nusselt numbers for Newtonian flow through a parallel-plate channel with recycle

General expressions for evaluating the asymptotic Nusselt number for a Newtonian flow through a parallel-plate channel with recycle at the ends have been derived. Numerical results with the ratio of thicknesses as a parameter for various recycle ratios are obtained. A regression analysis shows that the results can be expressed by log Nur^0.83=0.3589 (log)² -0.2925 (log) + 0.3348 forR 3, 0.1 0.9; logNu=0.5982(log)² +0.3755 × 10^–2 (log) +0.8342 forR 10^–2, 0.1 0.9.

---

Asymptotische Nusselt-Zahlen für die Newtonsche Strömung durch einen Kanal aus parallelen Platten mit Rückführung

Zusammenfassung In dieser Untersuchung wurden allgemeine Ausdrücke hergeleitet um die asymptotische Nusselt-Zahl für eine Newtonsche Strömung durch einen Kanal aus parallelen Platten mit Rückführung an den Enden berechnen zu können. Es wurden numerische Ergebnisse mit den Dicken-Verhältnissen, als Parameter für verschiedene Rückführungs-verhältnisse, erhalten. Eine Regressionsanalyse zeigt, daß die Ergebnisse wie folgt ausgedrückt werden können: log Nur^0,83=0,3589 (log)² -0,2925 (log) + 0,3348 fürR 3, 0,1 0,9; logNu=0,5982(log)² +0,3755 × 10^–2 (log) + 0,8342 fürR 10^–2, 0,1 0,9.

---

Nomenclature A₁ shooting value,d(0)/d - A₂ shooting value,d(1)/d - B channel width - Gz Graetz number, U_bW²/L - h _m logarithmic average convective heat transfer coefficient - h _x average local convective heat transfer coefficient - k thermal conductivity - L channel length - Nu average local Nusselt number, 2 h_xW/k - Nu _m logarithmic average Nusselt number, 2h_mW/k - R recycle ratio, reverse volume flow rate divided by input volume flow rate - T temperature of fluid - T _m bulk temperature, Eq. (8) - T ₀ temperature of feed stream - T _s wall temperature - U velocity distribution - U _b reference velocity,V/BW - V input volume flow rate - v dimensionless velocity distribution, U/U_b - W channel thickness - x longitudinal coordinate - y transversal coordinate - Z₁-z₆ functions defined in Eq. (A1) - thermal diffusivity - least squares error, Eq. (A7) - weight, Eqs. (A8), (A9) - dimensionless coordinate,y/W - dimensionless coordinate,x/GzL - function, Eq. (7)     

Dielectric properties of the composite system polyurethane — sodium chloride

Summary The dielectric properties of the composite system polyurethane-sodium chloride have been measured at frequencies between 10^–4 Hz and 3 · 10⁵ Hz in the temperature range from –150 °C up to +90 dgC. Three dielectric loss mechanisms have been found; they are indicated by ₁, ₂ and. The activation energy of the ₁-transition is 35 kcal/mole, that of the-transition 6.7 kcal/mole. The ₂-loss peak was only observed at frequencies of 10³ Hz and higher, forming one broad peak with the ₁-loss peak at lower frequencies. In the composite materials, the- and ₂-loss peaks measured at fixed frequencies were found at the same temperature. The ₂-loss peak, however, was shifted to a lower temperature, due to the sodium chloride filler. Comparison of experimental data of and tan with theoretical predictions concerning the dielectric properties of composite systems showed only partial agreement. The difference mainly consisted in. the temperature shift in the tan-peak of the ₁-transition.

---

Zusammenfassung Die dielektrischen Eigenschaften des Verbundssystems Kochsalz-Polyurethankautschuk wurden im Frequenzgebiet zwischen 10^–4 Hz und 3.10⁵ Hz und im Temperaturbereich von –150 °C bis +90 °C gemessen. Es wurden drei dielektrische Verlustmaxima gefunden, die mit ₁, ₂ und angedeutet werden. Die Aktivierungsenergie des ₁-Überganges beträgt 35 kcal/Mol, die des-Überganges 6.7 kcal/Mol. Das ₂-Maximum konnte nur bei Frequenzen höher als 10³Hz vom ₁-Maximum gesondert erfaßt werden. Die Lage der ₂- und-Maxima war vom Füllgrad unabhängig. Das ₁-Maximum verschiebt sich mit steigendem Füllgrad zu niedrigeren Temperaturen. Die gemessenen Werte von und tan stimmen nur teilweise mit den Aussagen einer Theorie der dielektrischen Eigenschaften von Mischkörpern überein.

     

Visco-elastic flow due to a plate which starts oscillating in the presence of a parallel stationary plate

In this paper, the flow of a visco-elastic liquid between two parallel plates has been studied when one plate is stationary and the other plate suddenly starts oscillating. Both finite Fourier sine transform and Laplace transform technique have been employed to solve the basic differential equations. The flow phenomenon has been characterized by the parameters, and and the effects of these on the flow characteristics have been studied through several graphs.Late professor of the department, who died in an accident on 7th July 1978.     

Low-Reynolds-number effects in a turbulent boundary layer

Low-Reynolds-number effects in a zero pressure gradient turbulent boundary layer have been investigated using a two-component LDV system. The momentum thickness Reynolds number R is in the range 400 to 1320. The wall shear stress is determined from the mean velocity gradient close to the wall, allowing scaling on wall variables of the inner region of the layer to be examined unambiguously. The results indicate that, for the present R range, this scaling is not appropriate. The effect of R on the Reynolds normal and shear stresses is felt within the sublayer. Outside the buffer layer, the mean velocity is more satisfactorily described by a power-law than by a logarithmic distribution.The support of the Australian Research Council is gratefully acknowledged     

An experimental study on vortex breakdown in a differentially-rotating cylindrical container

The vortex breakdown phenomenon in a closed cylindrical container with a rotating endwall disk was reproduced. Visualizations were performed to capture the prominent flow characteristics. The locations of the stagnation points of breakdown bubbles and the attendant global flow features were in excellent agreement with the preceding observations. Experiments were also carried out in a differentially-rotating cylindrical container in which the top endwall rotates at a relatively high angular velocity _t, and the bottom endwall and the sidewall rotate at a low angular velocity _sb. For a fixed cylinder aspect ratio, and for a given relative rotational Reynolds number based on the angular velocity difference _t–_sb, the flow behavior is examined as |_sb/_t| increases. For a co-rotation (_sb/_t>0), the breakdown bubble is located closer to the bottom endwall disk. However, for a counter-rotation (_sb/_t<0), the bubble is seen closer to the top endwall disk. For sufficiently large values of _sb, the bubble ceases to exist for both cases.     

LDA measurements in low Reynolds number turbulent boundary layer

LDA measurements of the mean velocity in a low Reynolds number turbulent boundary layer allow a direct estimate of the friction velocity U from the value of /y at the wall. The trend of the Reynolds number dependence of / is similar to the direct numerical simulations of Spalart (1988).     

Nonlinear shear-layer instability waves

The effects of critical-layer nonlinearity on spatially growing instability waves on shear layers between parallel streams are discussed. In the two-dimensional incompressible case, the flow in the critical layer is governed by a nonequilibrium (unsteady) nonlinear vorticity equation. The initial exponential growth of the instability wave is converted into algebraic growth during the streamwise aging of the critical layer into a quasi-equilibrium state. A uniformly valid composite formula for the instability wave amplitude, accounting for both nonparallel and nonlinear effects, is shown to be in good agreement with available experimental results. Nonlinear effects occur at smaller amplitudes for the three-dimensional and supersonic cases than in the two-dimensional incompressible case. The instability-wave amplitude evolution is then described by one integro-differential equation with a cubic-type nonlinearity, whose inviscid solution always end in a singularity at finite downstream distance.The US Government has the right to retain a nonexclusive royalty-free license in and to any copyright covering this paper.     

The effect of surface mass transfer on buoyancy induced flow in a variable porosity medium adjacent to a vertical heated plate

The effect of surface mass transfer on buoyancy induced flow in a variable porosity medium adjacent to a heated vertical plate is studied for high Rayleigh numbers. Similarity solutions are obtained within the frame work of boundary layer theory for a power law variation in surface temperature,T _Wx and surface injectionv _Wx(–1/2). The analysis incorporates the expression connecting porosity and permeability and also the expression connecting porosity and effective thermal diffusivity. The influence of thermal dispersion on the flow and heat transfer characteristics are also analysed in detail. The results of the present analysis document the fact that variable porosity enhances heat transfer rate and the magnitude of velocity near the wall. The governing equations are solved using an implicit finite difference scheme for both the Darcy flow model and Forchheimer flow model, the latter analysis being confined to an isothermal surface and an impermeable vertical plate. The influence of the intertial terms in the Forchheimer model is to decrease the heat transfer and flow rates and the influence of thermal dispersion is to increase the heat transfer rate.

---

Der Effekt des Oberflächenstoffaustausches bei auftriebsinduzierter Strömung in einem variablen porösen Medium, das an eine vertikale, beheizte Platte angrenzt

Zusammenfassung Es wird der Effekt des Oberflächenstoffaustausches in auftriebsinduzierter Strömung in einem variablen porösen Medium, das an eine vertikale, beheizte Platte angrenzt, für große Reynoldszahlen untersucht. Ähnliche Lösungen werden im Rahmen der Grenzschicht-Theorie, durch Variation des Potenzansatzes der Oberflächentemperatur,T _Wx , und der Oberflächengeschwindigkeit,v _Wx(–1/2), erreicht. Die Analyse vereinigt sowohl den Ausdruck, der Porösität und Permeabilität verbindet, als auch den Ausdruck, der Porösität und Wärmeleitfähigkeit miteinander verbindet. Der Einfluß der Temperaturverteilung auf Strömung und Wärmeübergangskennzahlen wird ebenfalls im Detail analysiert. Als Ergebnis der vorliegenden Untersuchung ergibt sich die Tatsache, daß variable Porösität Wärmeübertragungsrate und Betrag der Geschwindigkeit in Wandnähe steigert. Die bestimmenden Gleichungen, sowohl für das Darcysche Strömungsmodell als auch für das Forchheimersche Strömungsmodell, werden mit Hilfe eines implizierten Differenzenschemas gelöst. Die Berechnung wird für die beiden Fälle, isotherme Oberfläche und undurchlässige vertikale Platte, angewandt. Der Einfluß der Terme für die Trägheitskräfte im Forchheimerschen Modell senkt Wärmeübergangs- und Durchgangsrate, wogegen die Wärmeübergangsrate durch den Einfluß der Temperaturverteilung erhöht wird.

---

Nomenclature a constant defined by Eq. (12) - A constant defined by Eq. (12) - B constant defined by Eq. (3) - b _s/_f ratio of thermal conductivities - C constant defined by Eq. (1) - C _P specific heat of the convective fluid - d particle diameter - f dimensionless function defined by Eq. (14) - f _w lateral mass flux parameter - g acceleration due to gravity - k ₀ mean permeability of the mediumk ₀= ₀ ³ d ²/150 (1– ₀)² k ₀=1.75d/(1– ₀) 150 (Inertia parameter) - L length of the source or sink - m mass transfer - n constant defined in Eq. (12) - k (y) permeability of the porous medium - k (y) interial coefficient in the Ergun expression - Gr modified Grashof numberGr=(g k ₀ k ₀ (T _w–))/ ² - R _a Rayleigh number (g k ₀ x T _w–)/ - R _ad modified Rayleigh number (g k ₀ d|T _w–|)/ - N _u Nusselt number - s x/d - Q overall heat transfer rate - T temperature - T _w surface temperature - T ambient fluid temperature - u velocity in vertical direction - v velocity in horizontal direction - x vertical coordinate - y horizontal coordinate Greek symbols ₀ mean thermal diffusivity _f/ C_p - coefficient of thermal expansion - constant defined in Eq. (4) - ratio of particle to bed diameter - _e effective thermal conductivity - f thermal conductivity of fluid - _s thermal conductivity of solid - dimensionless similarity variable in Eq. (13) - value of at the edge of the boundary layer - constant defined in Eq. (1) - _e effective molecular thermal diffusivity - (y) porosity of the medium - ₀ mean porosity of the medium - viscosity of the fluid - ₀ density of the convective fluid - stream function - w condition at the wall - condition at infinity     

On the indentation of an inhomogeneous plastic solid

Summary The problem considered here is that of the indentation of a semi infinite, inhomogeneous rigid-plastic solid by a smooth, flat ended punch under conditions of plane strain. It is assumed that the yield stress of the solid k(x, y) has the form k ⁰+k(x, y) where k ⁰ is a constant and is small. A perturbation method of solution developed by Spencer [1] is used, and general results are obtained for arbitrary values of k(x, y). Some particular cases are then considered.     

Die Temperaturabhängigkeit der Oberflächenspannung von reinen Kältemitteln vom Tripelpunkt bis zum kritischen Punkt

Zusammenfassung Die Oberflächenspannung von sechs reinen Substanzen — SF₆, CCl₃F, CCl₂F₂, CClF₃, CBrF₃ und CHClF₂ — wurde mit Hilfe einer modifizierten Kapillarmethode gemessen. Die zur Berechnung der Oberflächenspannung erforderlichen Sättigungsdichten und wurden teils aus vorhandenen Zustandsgleichungen, teils aus ebenfalls gemessenen Brechungsindizes bestimmt. Die Temperaturabhängigkeit der Oberflächenspannung läßt sich durch einen erweiterten Ansatz nach van der Waals =_O (T_c-T)(1+...) darstellen, wobei bei einfachen Stoffen ein eingliedriger, bei polaren und assoziierenden Stoffen ein zweigliedriger Ansatz notwendig und ausreichend ist. Für den kritischen Exponenten der Oberflächenspannung wurde ein von der molekularen Substanz weitgehend unabhängiger Wert von =1.284±0.005 gefunden.

---

Temperature dependence of surface tension of pure refrigerants from triple point up to the critical point

The surface tension of six fluids (SF₆, CCl₃F, CCl₂F₂, CClF₃, CBrF₃, CHClF₂) have been measured by means of a modified capillary rise method. The liquid vapor densities, which are needed to calculate the surface tension, have partly been determined by means of refractive indices simultaneously measured in the same apparatus. The temperature dependence of the surface tension is described by an extended van der Waals power law =_O(T_c-T)(1+...). For simple fluids one term and for polar and associating fluids two terms are necessary and sufficient. The critical exponent is found to be 1.284 ± 0.005 and nearly independent of the molecular structure.

---

Formelzeichen a² Laplace-Koeffizient - a Parameter - B_O, B_on Koeffizient der Koexistenzkurve - g Erdbeschleunigung - H Höhe, kapillare Steighöhe - LL Lorentz-Lorenz-Funktion oder Refraktionskonstante - M molare Masse - M Zahl der Meßwerte - N Zahl der unbekannten Parameter - n Brechungsindex - p Druck - R,r Radius - s Entropie - SD Standardabweichung - T, t Temperatur - u innere Energie Griechische Formelzeichen Exponent des Laplace-Koeffizienten - Exponent der Koexistenzkurve - 2. Exponent der Oberflächenspannung - Wellenlänge des Lichts - Exponent der Oberflächenspannung - _D Dipolmoment - , Dichte der Flüssigkeit bzw. des Dampfes - Oberflächenspannung - reduzierte Temperatur (1-T/T_c) - ² gewichtete Varianz Indizes c kritischer Zustand - D Differenz - m Mittelwert - T Isotherme - t Zustand am Tripelpunkt - S Zustand am Schmelzpunkt - bezogen auf Oberfläche     

Correlations between porous medium flow data and turbulent tube flow results for aqueous hydroxypropylguar solutions (Part 2)

Turbulent tube flow and the flow through a porous medium of aqueous hydroxypropylguar (HPG) solutions in concentrations from 100 wppm to 5000 wppm is investigated. Taking the rheological flow curves into account reveals that the effectiveness in turbulent tube flow and the efficiency for the flow through a porous medium both start at the same onset wall shear stress of 1.3 Pa. The similarity of the curves = ( _w ) and = ( _w ), respectively, leads to a simple linear relation / =k, where the constantk or proportionality depends uponc. This offers the possibility to deduce (for turbulent tube flow) from (for flow through a porous medium). In conjunction with rheological data, will reveal whether, and if yes to what extent, drag reduction will take place (even at high concentrations).The relation of our treatment to the model-based Deborah number concept is shown and a scale-up formula for the onset in turbulent tube flow is deduced as well.     

Optical co-ordinates in general relativity 2 — the problem of distance

Summary Let denote the congruence of null geodesics associated with a given optical observer inV ₄. We prove that determines a unique collection of vector fieldsM₍₎ ( =1, 2, 3) and ₍₀₎ overV ₄, satisfying a weak version of Killing's conditions.This allows a natural interpretation of these fields as the infinitesimal generators of spatial rotations and temporal translation relative to the given observer. We prove also that the definition of the fieldsM₍₎ and ₍₀₎ is mathematically equivalent to the choice of a distinguished affine parameter f along the curves of, playing the role of a retarded distance from the observer.The relation between f and other possible definitions of distance is discussed.

---

Sommario Sia la congruenza di geodetiche nulle associata ad un osservatore ottico assegnato nello spazio-tempoV ₄. Dimostriamo che determina un'unica collezione di campi vettorialiM₍₎ ( =1, 2, 3) e ₍₀₎ inV ₄ che soddisfano una versione in forma debole delle equazioni di Killing. Ciò suggerisce una naturale interpretazione di questi campi come generatori infinitesimi di rotazioni spaziali e traslazioni temporali relative all'osservatore assegnato. Dimostriamo anche che la definizione dei campiM₍₎, ₍₀₎ è matematicamente equivalente alla scelta di un parametro affine privilegiato f lungo le curve di, che gioca il ruolo di distanza ritardata dall'osservatore. Successivamente si esaminano i legami tra f ed altre possibili definizioni di distanza in grande.

---

---

Work performed in the sphere of activity of: Gruppo Nazionale per la Fisica Matematica del CNR.     

Second order gravitational field theories with hilbert gauge

Summary We consider, in the field-theoretical approach, a class of gravitational theories deducible by a variational principle in the unrenormalized pseudo-Euclidean space-time. At first order in the coupling constant f we require the theories to coincide with the Einstein one. Moreover we assume the Hilbert gauge which assure the exclusion of the vector component of the gravitational potential . To get the higher order consistency we substitute the most general energy-momentum tensor for the particle tensorT ^(p) in the field equations. Requiring the latter to be deducible by a variational principle varying the potentials , we get a Lagrangian which, varying the particle coordinates, gives the equations of motion. So we get a class of theories depending on 5 arbitrary parameters. To have observable quantities we have to renormalize. So we realize that, to satisfy the equivalence principle, we have to put one of the arbitrary parameters equal to zero. With this choice the class of theories coincides at second order with general relativity.

---

Sommario Si vuole ottenere una classe di teorie gravitazionali deducibili da un principio variazionale, nell'ambito della teoria dei campi e nello spazio-tempo pseudoeuclideo non-rinormalizzato. Si richiede che tali teorie coincidano, al primo ordine nella costante di accoppiamento f, con la teoria di Einstein. Si assume inoltre la gauge di Hilbert al fine di escludere la presenza della componente vettoriale del potenziale . Per ottenere la consistenza al secondo ordine delle equazioni di campo, si sostituisce, in queste ultime, al tensore della particellaT ^(p) il più generale tensore energia-quantità-di-moto . Imponendo alle equazioni di campo di essere deducibili mediante un principio variazionale ove si varino i potenziali , si ottiene una lagrangiana che, ove si varino le coordinate della particella di prova, dà le equazioni di moto. In tal modo si ottiene una classe di teorie dipendenti da 5 parametri arbitrari. Per un confronto con i dati sperimentali è necessario rinormalizzare, onde esprimere quantità osservabili. Si dimostra così che per soddisfare il principio di equivalenza al secondo ordine è necessario porre uno dei 5 parametri uguale a zero e che, con tale scelta, l'intera classe di teorie coincide, al secondo ordine, con la relatività generale.

---

---

Research sponsored by the CNR, Gruppi di ricerca Matematica     

The chaotic response of a fluttering panel: The influence of maneuvering

The influence of maneuvering on the chaotic response of a fluttering buckled plate on an aircraft has been studied. The governing equations, derived using Lagrangian mechanics, include geometric non-linearities associated with the occurrence of tensile stresses, as well as coupling between the angular velocity of the maneuver and the elastic degrees of freedom. Numerical simulation for periodic and chaotic responses are conducted in order to analyze the influence of the pull-up maneuver on the dynamic behavior of the panel. Long-time histories phase-plane plots, and power spectra of the responses are presented. As the maneuver (load factor) increases, the system exhibits complicated dynamic behavior including a direct and inverse cascade of subharmonic bifurcations, intermittency, and chaos. Beside these classical routes of transition from a periodic state to chaos, our calculations suggest amplitude modulation as a possible new mode of transition to chaos. Consequently this research contributes to the understanding of the mechanisms through which the transition between periodic and strange attractors occurs in, dissipative mechanical systems. In the case of a prescribed time dependent maneuver, a remarkable transition between the different types of limit cycles is presented.Nomenclature a plate length - a _r u _r /h - D plate bending stiffness - E modulus of elasticity - g acceleration due to gravity - h plate thickness - j₁,j₂,j₃ base vectors of the body frame of reference - K spring constant - M Mach number - n 1 + ₀/g - N ₁ applied in-plane force - p–p aerodynamic pressure - P pa ⁴/Dh - q ₀/2 - Q _r generalized Lagrangian forces - R rotation matrix - R ₄ N, a ²/D - t time - kinetic energy - u plate deflection - u displacement of the structure - u _r modal amplitude - v₀ velocity - x coordinates in the inertial frame of reference - z coordinates in the body frame of reference - Ka/(Ka+Eh) - - elastic energy - 2qa ³/D - a/_mh - Poisson's ratio - material coordinates - air density - _m plate density - - _r prescribed functions - _r sin(r z/a) - angular velocity - a/v₀ - skew-symmetric matrix form of the angular velocity     

Flow through a helically coiled annulus

In this paper the flow is studied of an incompressible viscous fluid through a helically coiled annulus, the torsion of its centre line taken into account. It has been shown that the torsion affects the secondary flow and contributes to the azimuthal component of velocity around the centre line. The symmetry of the secondary flow streamlines in the absence of torsion, is destroyed in its presence. Some stream lines penetrate from the upper half to the lower half, and if is further increased, a complete circulation around the centre line is obtained at low values of for all Reynolds numbers for which the analysis of this paper is valid, being the ratio of the torsion of the centre line to its curvature.Nomenclature A =constant - a outer radius of the annulus - b unit binormal vector to C - C helical centre line of the pipe - D rL - g 1000 - K Dean number=Re² - L 1+r sin - M (L ²+ ² r ²)^1/2 - n unit normal vector to C - P, P pressure and nondimensional pressure - p ₀, p pressures of O(1) and O() - Re Reynolds number=aW ₀/ - (r, , s), (r, , s) coordinates and nondimensional coordinates - nonorthogonal unit vectors along the coordinate directions - r ₀ radius of the projection of C - t unit tangent vector to C - V _r, V , V _s velocity components along the nonorthogonal directions - V_r, V, V _s nondimensional velocity components along - W ₀ average velocity in a straight annulus Greek symbols , curvature and nondimensional curvature of C - U, V, W lowest order terms for small in the velocity components along the orthogonal directions t - _r, , _s first approximations to V _r , V, V _s for small - =/=/ - kinematic viscosity - density of the fluid - , torsion and nondimensional torsion of C - , stream function and nondimensional stream function - nondimensional streamfunction for U, V - a inner radius of the annulus After this paper was accepted for publication, a paper entitled On the low-Reynolds number flow in a helical pipe, by C.Y. Wang, has appeared in J. Fluid. Mech., Vol 108, 1981, pp. 185–194. The results in Wangs paper are particular cases of this paper for =0, and are also contained in [9].