手性离子液体配体交换色谱拆分扁桃酸对映体的研究

本文基于配体交换的机理,研究了以脯氨酸手性离子液体作为手性配体拆分扁桃酸(MA)对映体的方法及热力学过程。详细考察了手性离子液体的烷基链长、铜离子的浓度、离子液体的浓度和pH等因素对MA对映体分离的影响。研究发现,不同烷基链长的手性离子液体中,以1-丁基-3-甲基咪唑L-脯氨酸为配体时,MA对映体的拆分效果最好;随着铜离子浓度的增加,MA对映体的保留时间和分离度先增大再减小;而随着1-丁基-3-甲基咪唑L-脯氨酸离子液体的浓度和流动相pH的增大,保留时间和分离度均增大。本文还测定了拆分过程中的一些热力学参数,结果表明,MA对映体的拆分过程是一个焓控的过程,L-MA较D-MA与固定相有更强的相互作用,保留时间更长。     

手性配体交换毛细管电泳分离并拆分α-羟基酸对映体的研究

利用手性配体交换毛细管电泳模式，以铜(Ⅱ)为中心离子，L-脯氨酸为手性配体的配合物作手性选择子分离并拆分了3种α-羟基酸；分离条件为10mmol／L磷酸盐缓冲溶液(pH4．5)，50mmol／L Cu(AC)2和100mmol／L L-脯氨酸，分离电压20kV，温度为25℃。并考察了缓冲液pH值、选择子浓度以及温度等影响分离效果的因素，进一步优化了分离条件，取得了满意的分离结果。     

配体交换毛细管区带电泳拆分未衍生化氨基酸

以铜(Ⅱ)-L-谷氨酸络合物为手性分离选择剂,对苯丙氨酸、酪氨酸和色氨酸3种非衍生芳香族氨基酸的手性对映体拆分进行了研究,建立了一种快速、简便拆分未衍生化的氨基酸对映体的配体交换毛细管电泳方法.在使用10 mmol/L NH4AC(pH 5.0),5 mmol/L CuSO4和10 mmol/L L-谷氨酸的条件下,成功地拆分了苯丙氨酸、酪氨酸手性对映体;色氨酸手性对映体也得到部分分离;考察了电泳缓冲液组成、pH值等影响分离效果的因素.     

配体交换毛细管区带电泳拆分未衍生化氨基酸

以铜（Ⅱ）-L-谷氨酸络合物为手性分离选择剂，对苯丙氨酸、酪氨酸和色氨酸3种非衍生芳香族氨基酸的手性对映体拆分进行了研究，建立了一种快速、简便拆分未衍生化的氨基酸对映体的配体交换毛细管电泳方法。在使用10mmol／L NH4AC（pH5．0），5mmol／L CuSO4和10mmol／L L-谷氨酸的条件下，成功地拆分了苯丙氨酸、酪氨酸手性对映体；色氨酸手性对映体也得到部分分离；考察了电泳缓冲液组成、pH值等影响分离效果的因素。     

基于非手性离子液体的毛细管电泳法拆分3种手性药物

建立了以非手性离子液体1-正丁基-3-甲基咪唑氯(［BMIM］Cl)为手性分离的添加剂、β-环糊精作为手性选择剂的毛细管区带电泳(CZE)分离扑尔敏、氯霉素前体和氧氟沙星3种对映体的方法,并与未添加［BMIM］Cl的CZE分离情况进行了对比研究。发现［BMIM］Cl对手性药物的拆分有协同作用,不仅能够增加对映体的分离度,还能有效地抑制毛细管内壁对样品分子的吸附作用,改善峰形。采用离子液体辅助手性选择剂(尤其是环糊精)的CZE改进方法,为其他毛细管电泳难以分离的手性药物的分离分析提供了新的方法。     

离子液体作为添加剂的毛细管电泳法拆分盐酸金刚乙胺

将新离子液体[EIMCH2CONHBu]BF4用于毛细管电泳法拆分手性药物,建立了以β-环糊精为手性选择剂拆分盐酸金刚乙胺对映体的毛细管电泳方法。分别考察了离子液体浓度,手性选择剂浓度,缓冲溶液种类、浓度及pH值,分离电压等参数对分离度的影响,从而确定了盐酸金刚乙胺对映体的最佳拆分条件:[EIMCH2CONHBu]BF4溶液体积分数3.2%,β-环糊精18 mmol/L,NaH2PO4 15 mmol/L,缓冲液pH 3.03,分离电压15 kV。在优化的实验条件下,盐酸金刚乙胺对映体得到基线分离,分离度可达1.51。实验结果表明[EIMCH2CONHBu]BF4能够增强β-环糊精的手性拆分能力,对手性拆分有协同作用。     

三元非对映异构体复合物的直接实验证据及其在对映体手性分离中的作用

以含L-苯丙氨酸铜配位络合物的溶液作为手性流动相, 采用反相高效液相色谱法拆分了非衍生苯甘氨酸对映体, 使用质谱对拆分组分进行了结构鉴定, 得到了拆分组分的化学结构, 用量子化学计算预测了该结构的最稳定构象. 质谱实验结果表明, 拆分组分是一对铜混合配体复合物离子, 其中的一个配体是提供手性环境的流动相添加物(L-苯丙氨酸), 另一配体是待拆分物质的某一构型对映体, 这对铜混合配体复合物离子本质上属于非对映异构体. 在色谱分离实验中还考察了手性流动相pH值、甲醇含量以及L-苯丙氨酸与Cu²⁺ 的摩尔比等因素对分离效果的影响.     

头孢曲松钠对映体的β-环糊精手性添加剂毛细管电泳拆分

运用 β_环糊精(β_CD)手性添加剂毛细管电泳方法对头孢曲松钠对映体进行了拆分 ;在不同电极性和一定 β_环糊精浓度的条件下 ,考察了背景电解质pH值对手性拆分的影响,建立了毛细管电泳拆分头孢曲松钠对映体的方法 ;拆分头孢曲松钠对映体的最佳条件为缓冲液50mmol·L-1 NaH2PO4-0.04mmol·L-1 β_CD -3.0mmol·L-1 三羟甲基氨基甲烷,分离电压28kV,pH7.15;在优化实验条件下 ,头孢曲松钠对映体得到了基线分离 ;并用该法测定了不同厂家的头孢曲松钠中两种对映体的含量 ;所建立的方法可为药品质量控制及临床有效的选择抗菌药物提供理论依据     

手性配位交换色谱法拆分普卢利沙星对映体

以L-异亮氨酸和CuSO4作为手性流动相添加剂,采用手性配位交换色谱法拆分普卢利沙星对映体.考察了添加剂的种类、浓度、比例以及流动相pH等因素对拆分的影响.优化的色谱条件为:C18色谱柱,流动相为8 mmol/L L-异亮氨酸和4 mmol/L CuSO4溶液(pH=3.5)-甲醇(68∶32,V/V),流速为1.0 ...     

α-萘基缩水甘油醚对映体的毛细管区带电泳手性拆分

建立了毛细管区带电泳手性拆分α-萘基缩水甘油醚对映体的方法.考察了不同手性拆分试剂对手性选择性的影响,实验结果表明,20 mmol/L H3PO4-三乙醇胺(pH 2.5)、2%(w/V)HS-β-CD、毛细管温度20 ℃、运行电压-18 kV为最佳分离条件,在该分离条件下α-萘基缩水甘油醚对映体实现基线分离.方法简便、准确,可用于α-萘基缩水甘油醚的手性拆分和对映体过量值(ee,%)测定.     

离子液体[EMIM][PF6]负载纳米SiOx表面的熔点及结构

制备了离子液体(1-乙基-3-甲基咪唑六氟磷酸 [EMIM][PF₆])负载量不同的多孔纳米氧化硅(SiO_x), 并采用差式扫描量热分析(DSC)、X射线衍射(XRD)、激光Raman光谱、傅里叶变换红外(FTIR)光谱分析等手段研究离子液体负载纳米氧化硅后的熔点变化及相行为. 研究表明负载于纳米氧化硅表面的离子液体熔点明显下降, 且负载于不同表面羟基含量的氧化硅表面熔点下降幅度不同. 纯离子液体[EMIM][PF₆]熔点为62 ℃, 在纳米氧化硅表面负载量为35%时熔点为52 ℃, 比负载前下降10 ℃; 负载于另两种不同羟基含量的纳米氧化硅表面后熔点分别下降20和17 ℃. 而同一种纳米氧化硅(比表面积为640 m²·g^-1)在负载量小于50%时, 熔点下降明显; 进一步增大负载量, 熔点逐渐趋于本体. XRD和Raman光谱分析显示, 离子液体负载于氧化硅表面后其衍射峰或吸收峰相对强度发生明显改变. 分析负载前后纳米氧化硅的结构变化, 推断离子液体熔点下降的主要原因是离子液体分子与纳米氧化硅表面之间存在强烈的界面相互作用, 而表面羟基的密度及比表面积是影响负载后[EMIM][PF₆]离子液体相行为的主要因素.     

Effect of water on the interfacial structures of room-temperature ionic liquids

The interfacial structures of cyano-based room-temperature ionic liquids play a very important role in reducing friction. However, the presence of water impairs their tribological performance. The interfacial structures and friction forces of 1-ethyl-3-methylimidazolium dicyanamide, [EMIM][DCN], and the effect of water on these structures and forces were investigated using atomic force microscopy. In addition, the interaction of water and [EMIM][DCN] was evaluated using Fourier-transform infrared (FT-IR) spectroscopy. Multiple repulsive layers were observed in the [EMIM][DCN] solution. This solution showed low friction force because these repulsive layers worked as protective layers against friction. On the other hand, the specific repulsive layer characteristics of [EMIM][DCN] could not be observed in a [EMIM][DCN] + 2 wt% H₂O solution. FT-IR results indicated that the layer structure of [EMIM][DCN] was disturbed by the addition of H₂O. Therefore, the solution containing water exhibited a high friction force.     

Intramolecular electron transfer within a covalent, fixed-distance donor-acceptor molecule in an ionic liquid

Intramolecular photoinduced charge separation and recombination within the donor-acceptor molecule 4-(N-pyrrolidino)naphthalene-1,8-imide-pyromellitimide, 5ANI-PI, are studied using ultrafast transient absorption spectroscopy in the room-temperature ionic liquid, 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide [EMIM][Tf2N]. The rate constants of both photoinduced charge separation and charge recombination for 5ANI-PI in [EMIM][Tf2N] are comparable to those observed in pyridine, which has a static dielectric constant similar to that of [EMIM][Tf2N] but a viscosity that is nearly 2 orders of magnitude lower than that of [EMIM][Tf2N]. The electron-transfer dynamics of 5ANI-PI in [EMIM][Tf2N] are compared to those in pyridine as a function of temperature and are discussed in the context of recently reported ionic liquid solvation studies.     

l‐Lysine‐derived ionic liquids as chiral ligands of Zn(II) complexes used in ligand‐exchange CE

Amino acid ionic liquids (AAILs) with l ‐lysine (l ‐Lys) as anion were synthesized and applied as new chiral ligands in Zn(II) complexes for chiral ligand‐exchange CE. After effective optimization, baseline enantioseparation of seven pairs of dansylated amino acids was achieved with a buffer of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM ZnSO₄, and 6.0 mM [C₆mim][l ‐Lys] at pH 8.2. To validate the unique behavior of AAILs, a comparative study between the performance of Zn(II)‐l ‐Lys and Zn(II)‐[C₆mim][l ‐Lys] systems was conducted. In Zn(II)‐[C₆mim][l ‐Lys] system, it has been found that the improved chiral resolution could be obtained and the migration times of the three test samples were markedly prolonged. Then the separation mechanism was further discussed. The role of [C₆mim][l ‐Lys] indicated clearly that the synthesized AAILs could be used as chiral ligands and would have potential utilization in separation science in future.     

Direct electrochemistry and electrocatalysis of myoglobin immobilized in hyaluronic acid and room temperature ionic liquids composite film

A novel biocomposite film based on hyaluronic acid (HA) and hydrophilic room temperature ionic liquid 1-ethyl-3-methyl-imidazolium tetrafluoroborate ([EMIM][BF₄]) was explored. Here, HA was used as a binder to form [EMIM][BF₄]-HA composite film and help [EMIM][BF₄] to attaching on glass carbon electrode (GCE) surface, while doping [EMIM][BF₄] in HA can effectively reduce the electron transfer resistance of HA. The composite film can be readily used as an immobilization matrix to entrap myoglobin (Mb). A pair of well-defined and quasi-reversible redox peaks of Mb was obtained at the Mb-[EMIM][BF₄]-HA composite film modified GCE (Mb-[EMIM][BF₄]-HA/GCE) through direct electron transfer between Mb and the underlying electrode. The Mb-[EMIM][BF₄]-HA/GCE showed an excellent electrocatalytic activity toward the reduction of H₂O₂. Based on the [EMIM][BF₄]-HA biocomposite film, a third-generation reagentless biosensor could be constructed for the determination of H₂O₂.     

Effect of anions on static orientational correlations, hydrogen bonds, and dynamics in ionic liquids: a simulational study

Three different ionic liquids are investigated via atomistic molecular dynamics simulations using the force field of Lopes and PAdua (J. Phys. Chem. B 2006, 110, 19586). In particular, the 1-ethyl-3-methylimidazolium cation EMIM+ is studied in the presence of three different anions, namely, chloride Cl-, tetrafluoroborate BF(4)(-), and bis((trifluoromethyl)sulfonyly)imide TF2N-. In the focus of the present study are the static distributions of anions and cations around a cation as a function of anion size. It is found that the preferred positions of the anions change from being close to the imidazolium hydrogens to being above and below the imidazolium rings. Lifetimes of hydrogen bonds are calculated and found to be of the same order of magnitude as those of pure liquid water and of some small primary alcohols. Three kinds of short-range cation-cation orderings are studied, among which the offset stacking dominates in all of the investigated ionic liquids. The offset stacking becomes weaker from [EMIM][Cl] to [EMIM][BF4] to [EMIM][TF2N]. Further investigation of the dynamical behavior reveals that cations in [EMIM][TF2N] have a slower tumbling motion compared with those in [EMIM][Cl] and [EMIM][BF4] and that pure diffusive behavior can be observed after 1.5 ns for all three systems at temperatures 90 K above the corresponding melting temperatures.     

16种手性化合物在不同自制手性固定相上的拆分比较

采用高效液相色谱法,在自制的纤维素-三(3,5-二甲基苯基氨基甲酸酯)(ATEO-OD)、纤维素-三(4-甲基苯基氨基甲酸酯)(ATEO-OG)和纤维素-三(4-甲基苯基甲酸酯)(ATEO-OJ)3种手性柱上对16种不同结构的手性化合物进行了拆分和比较.试验结果表明:16个手性样品在这3种手性固定相上分别获得了不同程度的拆分,A TEO-OD对所分析样品具有更好的手性识别能力,ATEO-OG和ATEO-OJ的手性识别能力相当.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Liquid–Liquid Equilibrium Data for 1-Ethyl-3-methylimidazolium Acetate–Thiophene–Diesel Compound: Experiments and Correlations

Extraction of thiophene from cyclohexane, isooctane and toluene were performed using the ionic liquid 1-ethyl-3-methylimidazolium acetate ([EMIM][OAc]) at T=298.15 K. The liquid?Cliquid equilibrium (LLE) experiments were performed on three systems, namely: [EMIM][OAc]?Cthiophene?Ccyclohexane, [EMIM][OAc]?Cthiophene?Cisooctane and [EMIM][OAc]?Cthiophene?Ctoluene. The LLE data showed that [EMIM][OAc] has a higher selectivity at low concentration of thiophene and also showed that the hydrocarbon-rich phase is free of ionic liquid. This implies that there will be no cross contamination and the ionic liquid will be a non-pollutant in fuel after extraction. Further, the amount of hydrocarbon in the ionic-liquid-rich phase is very small. This implies that ionic liquid can be regenerated with negligible loss of fuel. LLE data was then correlated using the NRTL and UNIQUAC models. These showed root mean square deviation (RMSD) values of 0.82?% and 1.46?% for the isooctane system, 1.37?% and 1.57?% for the cyclohexane system and 1.39?% and 1.53?% for the toluene system.     

Development of new chiral ligand exchange capillary electrophoresis system with amino acid ionic liquids ligands and its application in studying the kinetics of l-amino acid oxidase

New kinds of amino acid ionic liquids (AAILs) with pyridinium as cations and l-lysine (l-Lys) as anion have been developed as the available chiral ligands coordinated with Zn(II) in chiral ligand-exchange capillary electrophoresis (CLE-CE). Four kinds of AAILs, including [1-ethylpyridinium][l-lysine], 1-butylpyridinium][l-lysine], [1-hexylpyridinium][l-lysine] and 1-[octylpyridinium][l-lysine], were successfully synthesized and characterized by nuclear magnetic resonance and mass spectrometry. Compared with other AAILs, the best chiral separation of Dns-d, l-amino acids could be achieved when [1-ethylpyridinium][l-lysine] was chosen as the chiral ligand. It has been found that after investigating the influence of key factors on the separation efficiency, such as pH of buffer solution, the ratio of Zn(II) to ligand and complex concentration, eight pairs of Dns-d, l-AAs enantiomers could be baseline separated and three pairs were partly separated under the optimum conditions. The proposed CLE-CE method also exhibited favorable quantitative analysis property of Dns-d, l-Met with good linearity (r² = 0.998) and favorable repeatability (RSD ≤ 1.5%). Furthermore, the CLE-CE system was applied in investigating the kinetic contents of l-amino acid oxidase, which implied that the proposed system has the potential in studying the enzymatic reaction mechanism.