Determination of arsenic species in solid matrices utilizing supercritical fluid extraction coupled with gas chromatography after derivatization with thioglycolic acid n‐butyl ester

A method using derivatization and supercritical fluid extraction coupled with gas chromatography was developed for the analysis of dimethylarsinate, monomethylarsonate and inorganic arsenic simultaneously in solid matrices. Thioglycolic acid n‐butyl ester was used as a novel derivatizing reagent. A systematic discussion was made to investigate the effects of pressure, temperature, flow rate of the supercritical CO₂, extraction time, concentration of the modifier, and microemulsion on extraction efficiency. The application for real environmental samples was also studied. Results showed that thioglycolic acid n‐butyl ester was an effective derivatizing reagent that could be applied for arsenic speciation. Using methanol as modifier of the supercritical CO₂ can raise the extraction efficiency, which can be further enhanced by adding a microemulsion that contains Triton X‐405. The optimum extraction conditions were: 25 MPa, 90°C, static extraction for 10 min, dynamic extraction for 25 min with a flow rate of 2.0 mL/min of supercritical CO₂ modified by 5% v/v methanol and microemulsion. The detection limits of dimethylarsinate, monomethylarsonate, and inorganic arsenic in solid matrices were 0.12, 0.26, and 1.1 mg/kg, respectively. The optimized method was sensitive, convenient, and reliable for the extraction and analysis of different arsenic species in solid samples.     

A new strategy for supercritical fluid extraction of copper ions

Complexation combined with supercritical fluid extraction was used to extract Cu²⁺. The effects of pressure, temperature, and total volume of CO₂ on the efficiency of extraction were systematically investigated. The extraction recovery was low (57.32%) only by pure supercritical CO₂. Addition of a suitable amount of methanol (v/v=5%) to supercritical CO₂ could enhance the extraction of Cu²⁺ (72.69%, relative standard deviation (R.S.D.)=2.12%, n=3), and the recovery increased largely (90.52%, R.S.D.=2.20%, n=3) in the presence of nonionic surfactant Triton X-100. Reverse micelle formation is presented as a new strategy of improving the extraction of metal ions with supercritical CO₂ in this paper.     

丙烯酰胺多面体低聚倍半硅氧烷在超临界CO2中的RAFT聚合

以超临界CO₂为聚合介质, 硫代苯甲酰基特丁基硫酯(TTBT)为链转移剂, 通过可逆加成-断裂链转移(RAFT)聚合制备了聚丙烯酰胺多面体低聚倍半硅氧烷(PAMPOSS)均聚物及其与甲基丙烯酸甲酯(PMMA)的嵌段共聚物(PAMPOSS-b-PMMA). 对产物结构组成和分子量及其分布进行表征. 结果表明, 在TTBT的控制下, POSS的均聚物和嵌段共聚物具有高分子量及窄分子量分布. 含POSS单体在超临界CO₂中为均相聚合, POSS聚合物的结晶性在一定程度上影响其在超临界CO₂中溶解性.     

Reactive supercritical fluid extraction and chromatography of arsenic species

Reactive supercritical fluid extraction has been used for the speciation of organic (DMA and MMA) and inorganic (As(III) and As(V)) arsenic compounds in solid samples. Derivatization with thioglycolic acid methylester (TGM) was performed in supercritical carbon dioxide. Different extraction conditions have been tested. The arsenic derivatives have been analyzed by GC. A capillary-SFC method was evaluated for the analysis of the TGM derivatives and compared with GC.Dedicated to Professor Dr. Dieter Klockow on the occasion of his 60th birthday     

一种新型CO2/原油助混剂CAA8-X的应用与助混机理

CO₂驱是一种具有广阔前景的提高油藏采收率的方法。其中,降低CO₂与原油的最低混相压力以实现混相驱是增强CO₂驱效果的重要手段。由此我们设计了由亲油基团十六烷基和亲CO₂基团全乙酰蔗糖酯基结合的新型“亲油-亲CO₂助混分子”十六酸全乙酰基蔗糖酯CAA8-X,研究发现,CAA8-X对超临界CO₂流体和不同油相的煤油、白油以及长庆原油有优异的助混效果,界面张力消失法和细管实验法测定结果表明,CAA8-X可以将超临界CO₂/长庆原油的最低混相压力降低20.5%。用分子动力学模拟计算了CO₂分子与全乙酰蔗糖酯基的亲和能力,研究了这类新型“亲油-亲CO₂助混分子”通过多酯头基降低与CO₂亲和势能而降低油/CO₂界面能的助混机理。     

Extraction of Microcystins From Cyanobacteria Using Aqueous Methanol Modified Supercritical Carbon Dioxide

A new method for the fast extraction of microcystins RR and LR in cyanobacterium was developed using carbon dioxide supercritical fluid. The microcystins were successfully extracted with 90% aqueous methanol modified CO₂. The method developed here has several advantages over solid phase extraction sample preparation technique for the analysis of microcysins.     

Alkylation of anions on solid inorganic supports : an interpretation of the function of the supports

In the anionic alkylation (CH₃ CO₂K + n C₈ H₁₇ Br) on solid inorganic supports, silica impregnated with cationic surfactant appears to be as effective as alumina, while silica bearing ammonium groups covalently bonded to the support (SPHEROSIL QMA) exhibits increased effectiveness. An interpretation based upon the superficial charge of the solid surfaces is proposed.     

Determination of sunscreen agents in cosmetic products by supercritical fluid extraction and high-performance liquid chromatography

A rapid supercritical fluid extraction (SFE) procedure for the isolation of five of the most common sunscreen agents (2-ethylhexyl-p-dimethylaminobenzoate, 2-hydroxy-4-methoxybenzophenone, 2-ethylhexyl-p-methoxycinnamate, 4-methylbenzylidene camphor and 4-tert.-butyl-4′-methoxydibenzoylmethane) from cosmetic products is described. Investigation of the factors affecting the extraction efficiency in SFE indicated that sunscreen recoveries were affected mainly by the supercritical CO₂ pressure and by the trapping method. The sunscreens were analyzed by reversed-phase high-performance liquid chromatography after a 10-min extraction of the cosmetic product with CO₂ at 250 bar and 40°C, using sequential glass surface and C₁₈ sorbent as collection system. A quantitative comparison of SFE with a liquid extraction procedure was performed on commercial cosmetics. The SFE method yielded recoveries higher than 94.8% compared with conventional liquid extraction and exhibited a precision better than 5.3% relative standard deviation. Moreover, SFE minimized sample handling, reduced the consumption of harmful solvents and afforded a more effective purification of the cosmetic matrices.     

Automated system for on-line determination of dimethylarsinic and inorganic arsenic by hydride generation–atomic fluorescence spectrometry

A multisyringe flow-injection approach has been coupled to hydride generation-atomic fluorescence spectrometry (HG-AFS) with UV photo-oxidation for dimethylarsinic (DMA), inorganic As and total As determination, depending on the pre-treatment given to the sample (extraction or digestion). The implementation of a UV lamp allows on-line photo-oxidation of DMA and the following arsenic detection, whereas a bypass leads the flow directly to the HG-AFS system, performing inorganic arsenic determination. DMA concentration is calculated by the difference of total inorganic arsenic and measurement of the photo-oxidation step. The detection limits for DMA and inorganic arsenic were 0.09 and 0.47 μg L(-1), respectively. The repeatability values accomplished were of 2.4 and 1.8%, whereas the injection frequencies were 24 and 28 injections per hour for DMA and inorganic arsenic, respectively. This method was validated by means of a solid reference material BCR-627 (muscle of tuna) with good agreement with the certified values. Satisfactory results for DMA and inorganic arsenic determination were obtained in several water matrices. The proposed method offers several advantages, such as increasing the sampling frequency, low detection limits and decreasing reagents and sample consumption, which leads to lower waste generation.     

Speciation analysis of arsenic and selenium compounds in environmental and biological samples by ion chromatography-inductively coupled plasma dynamic reaction cell mass spectrometer

An inductively coupled plasma mass spectrometer (ICP-MS) was used as an ion chromatographic (IC) detector for the speciation analysis of arsenic and selenium. The arsenic and selenium species studied included arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), arsenobetaine (AsB), selenite [Se(IV)] and selenate [Se(VI)]. Gradient elution using (NH₄)₂CO₃ and methanol at pH 9 allowed the chromatographic separation of all species in less than 12 min. Effluents from the IC column were delivered to the nebulization system of ICP-DRC-MS for the determination of arsenic and selenium. The potentially interfering ³⁸Ar⁴⁰Ar⁺ and ⁴⁰Ar⁴⁰Ar⁺ at the selenium masses m/z 78 and 80 were reduced in intensity by approximately 3 orders of magnitude by using 0.6 mL min⁻¹ CH₄ as reactive cell gas in the DRC while an Rpq value of 0.3 was used. Meanwhile, arsenic was determined as the adduct ion ⁷⁵As¹²CHH⁺ at m/z 89, which is more sensitive than ⁷⁵As. The limits of detection for arsenic and selenium were in the range of 0.002–0.01 ng mL⁻¹ and 0.01–0.02 ng mL⁻¹, respectively, based on peak height. The relative standard deviation of the peak areas for five injections of 5 ng mL⁻¹ As and Se mixture was in the range of 2–4%. The concentrations of arsenic and selenium species have been determined in urine samples collected locally. The major As and Se species in urines were AsB, DMA and probably selenosugar at concentration of 20–40, 15–19 and 17–31 ng mL⁻¹, respectively. The recoveries were in the range of 94–105% for all the determinations. This method has also been applied to determine various arsenic compounds in two fish samples. In this study, a simple and rapid microwave-assisted extraction method was used for the extraction of arsenic compounds from fish. The arsenic species were quantitatively leached with an 80% v/v methanol solution in a focused microwave field during a period of 5 min.     

Speciation of arsenic using capillary gas chromatography with atomic emission detection

A gas chromatography method with atomic emission detection (GC-AED) for the determination of dimethylarsinic acid (DMA), monomethylarsonic acid (MMA) and inorganic arsenic was optimized. The analytes were derivatized in the sample solutions with methyl thioglycolate (TGM) and the products were extracted into cyclohexane before an aliquot of this organic phase was directly injected into the chromatograph. The procedure was applied to the analysis of seawaters, wines, beers and infant foods, the last requiring an additional enzymatic reaction prior to analyte derivatization. Detection limits in seawaters and beverages were 0.05, 0.15 and 0.8 ng mL⁻¹ for DMA, MMA and inorganic arsenic, respectively. In infant foods the detection limits were 1, 10 and 25 ng g⁻¹ for DMA, MMA and inorganic arsenic, respectively. Inorganic arsenic was detected in some of the seawater samples and three of the wines analyzed at concentration levels in the range 1-40 ng mL⁻¹, and DMA in several of the infant foods in the range 20-80 ng g⁻¹. The method was validated by analyzing a certified reference material and by recovery studies. All the samples were also analyzed by hydride generation and atomic fluorescence spectrometry (HG-AFS), which provided data for the total arsenic content.     

Studies on the uptake of different arsenic forms and the influence of sample pretreatment on arsenic speciation in White mustard (Sinapis alba)

The concentration and speciation of arsenic incorporated by plants grown in the presence of different arsenic compounds was compared, and the influence of plant sample pretreatment and extraction procedures on the recovery and reliability of speciation analyses was studied. It was concluded that sample pretreatment greatly affected the extraction efficiency, but did not change arsenic speciation. The most suitable extraction procedure involved dried plant material without the use of liquid nitrogen. To assess the ability of White mustard to uptake arsenic in different forms, samples were cultivated in nutrient solutions containing either As(III), As(V), monomethylarsonic acid (MMA) or dimethylarsinic acid (DMA). The translocation factor was the highest (0.70) when DMA was added to the nutrient solution, however the overall As concentration in plant tissues was the lowest in this case. Only inorganic As was found in plant tissues when either As(III) or As(V) was added to the nutrient solution. When organic arsenic was present in the nutrient medium, however, it was partially transformed by the plants into inorganic forms.     

高效液相色谱-等离子质谱联用分析食品中的主要有机砷和无机砷

应用液相色谱-等离子质谱联用的方法分析食品样品中的主要有机砷(一甲基砷和二甲基砷)和无机砷(三价砷和五价砷)。 采用50%(体积分数)甲醇水溶液作为萃取剂,将食品样品进行预处理,再以5 mmol/L四丁氢铵,2 mmol/L丙二酸和5%(体积分数)甲醇水溶液作为流动相(pH 5.9),C18色谱柱(150 mm×4 mm i.d., 5 μm)将样品萃取液进行液相色谱分离,最后进入等离子质谱仪定性分析。 经测定发现,新鲜蔬菜和水果样品中主要含有的无机砷为三价砷和五价砷,有机砷为二甲基砷。一甲基砷在个别样品     

8-Phenyl-(4-oxy-acetic acid N-hydroxysuccinimidyl ester)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene as a new highly fluorescent-derivatizing reagent for aliphatic amines in disease-related samples with high-performance liquid chromatography

A novel fluorescent-activated ester, 8-phenyl-(4-oxy-acetic acid N-hydroxysuccinimidyl ester)-4,4-difluoro-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene (TMPAB-OSu) has been designed and synthesized for amine labeling in HPLC. Being used 11 aliphatic amines as the models, the derivatization conditions were optimized. In 0.2 mol/l borate buffer (pH 8.8), amines reacted with TMPAB-OSu at 30 °C to form the derivatives in 10 min. The fluorescent quantum yield of TMPAB-OSu and its amine derivatives are high even compared with fluorescein. The separation of these amine derivatives was achieved with a C₈ column and gradient elution by using 0.1 mol/l sodium acetate buffer (pH 5.0) and methanol. With fluorescence detection at an emission wavelength of 509 nm and an excitation wavelength of 497 nm, the detection limits of aliphatic amines were 2–18 fmol, at a signal-to-noise ratio of 3:1. The proposed TMPAB-OSu-based HPLC method has been applied to the analysis of urine samples of health, hepatic and renal patients and lake water. Recoveries from different matrices are from 96 to 104%, depending on the sample investigated.     

亚临界和超临界二氧化碳-甲醇混合气相及液相区中甲醇核磁弛豫速率比较研究

用核磁共振氢谱测量了不同温度（293.15和308.15 K）及压力高达25 MPa下二氧化碳-甲醇混合气相（超临界）及液相区（亚临界）中甲醇（羟基及甲基）的纵向弛豫时间T_1,exp。本工作的目的是考察近临界区二氧化碳-甲醇混合物的压力、温度及组成对甲醇弛豫速率的影响,揭示混合物不同相区（气相及液相区）中自旋-晶格弛豫（SLR）过程的机理。此外,还对比研究了等温条件下超临界和亚临界混合气相及液相区中甲醇的SLR速率1/T_1,exp随混合物密度的变化规律。研究发现,在本工作所涉及的温度及压力区间,对于纯甲醇或液相区其SLR过程是以偶极-偶极（DD）作用机理为主导,而在气相区SLR过程则是以自旋-转动（SR）作用机理占优势,也即,超临界和亚临界二氧化碳-甲醇混合物的SLR过程在不同相区有不同的作用机理控制。由于甲醇的SLR弛豫速率1/T_1,exp是由甲醇分子间及分子内的DD作用和SR作用三部分共同决定的,所以研究超临界和亚临界二氧化碳-甲醇混合物的SLR弛豫速率随压力、浓度及温度的变化规律有助于提供更多该混合物不同相态区分子间相互作用的动态学信息。     

微波辅助提取-液相色谱-氢化物发生-原子荧光光谱法分析沉积物中砷的形态

采用微波辅助提取-液相色谱-氢化物发生-原子荧光光谱法(LC-HG-AFS)联用技术分析了太湖沉积物中砷的形态[亚砷酸(As(III))、二甲基砷酸钠(DMA)、一甲基砷酸二钠(MMA)和砷酸As(V)]。测得沉积物中以无机砷为主,且以As(V)居多。选定以1mol/L的磷酸和0.1mol/L抗坏血酸为提取液,在微波辅助萃取(功率为60W,时间12min)下,萃取率达79.84%～91.57%,回收率在94.78%～107.6%之间。4种砷的形态在0～160μg/L之间时线性良好,检测限为0.6～2.3μg/L,相对标准偏差RSD为1.62%～2.20%。方法具有简便、快速、灵敏的特点。     

紫草油有效成分的高效液相色谱测定法及其在超临界流体萃取制备紫草油中的应用

紫草提取制备成的紫草油能够预防及治疗婴儿尿布疹、皮肤溃烂、湿疹等多种皮肤疾患,临床应用非常广泛,超临界流体萃取是紫草有效成分提取的优选方法.该文建立了紫草油有效成分的高效液相色谱(HPLC)测定方法,并以紫草油所含的有效成分含量为评价指标,采用三因素三水平正交试验法对紫草超临界流体萃取制备过程中的几个重要因素(萃取压力...     

Stable Isotope Dilution Analysis of Gibberellin Residues in Tomato Paste by Liquid Chromatography-Tandem Mass Spectrometry

An accurate and sensitive method for the simultaneous determination of gibberellic acid(GA₃), gibberellin A₄(GA₄) and gibberellin A₇(GA₇) residues in tomato paste was developed by coupling solid phase extraction to high performance liquid chromatography-tandem mass spectrometry(LC-MS/MS) with electrospray ionization based stable isotope dilution analysis(SIDA). The isotope labeled internal standard can compensate for the losses during the extraction and cleanup steps and for discrimination due to ion suppression. After extraction from methanol, hydrophile lipophilic balance(HLB) solid phase extraction(SPE) column was tested for the capacity of the cleanup of the tomato paste in compared with C₁₈ SPE column which is the common way to the detection of GAs, and the former gained better result. Spiked experiments were performed in the non-contaminated tomato pastes and the recoveries of GA₃, GA₄ and GA₇ were 42.6%―75.0% in external standard method(ESM) and 91.1%―103.8% in internal standard method(ISM) respectively. The validities of this method were investigated and good analytical performance for the three GAs was obtained, including low limits of method detection(2 ng/g for GA₃ and GA₄, 0.3 ng/g for GA₇), excellent linear dynamic ranges(5―500 ng/g for GA₃ and GA₄, 1―100 ng/g for GA₇) and good relative standard deviation ranges(4.8%―9.4% for the intra-day test and 3.5%―11.9% for the inter-day test).     

Comparison of extraction procedures for arsenic speciation in environmental solid reference materials by high‐performance liquid chromatography–hydride generation‐atomic fluorescence spectroscopy

Water and ‘soft’ extractions (hydroxylammonium hydrochloride, ammonium oxalate and orthophosphoric acid) have been studied and applied to the determination of arsenic species (arsenite, arsenate, monomethylarsonic acid (MMA) and dimethylarsinic acid (DMA)) in three environmental solid reference materials (river sediment, agricultural soil, sewage sludge) certified for their total arsenic content. The analytical method used was ion exchange liquid chromatography coupled on‐line to atomic fluorescence spectroscopy through hydride generation. Very low detection limits for arsenic were obtained, ranging from 0.02 to 0.04 mg kg^?1 for all species in all matrices studied. Orthophosphoric acid is the best extractant for sediment (mixed origin) and sludge samples (recent origin) but not for the old formation soil sample, from which arsenic is extracted well only by oxalate. Both inorganic forms (As(III) and As(V)) are significant in all samples, As(V) species being predominant. Moreover, organic forms are found in water extracts of all samples and are more important in the sludge sample. These organic forms are also present in the ‘soft’ extracts of sludge. Microwave‐assisted extraction appears to minimize the risk of a redox interconversion of inorganic arsenic forms. This study points out the necessity of combining direct and sequential extraction procedures to allow for initial arsenic speciation and to elucidate the different mineralogical phases–species associations. Copyright © 2002 John Wiley & Sons, Ltd.     

Extraction and speciation of arsenic in plants grown on arsenic contaminated soils

A sequential arsenic extraction method was developed that yielded extraction efficiencies (EE) that were approximately double those using current methods for terrestrial plants. The method was applied to plants from two arsenic contaminated sites and showed potential for risk assessment studies. In the method, plants were extracted first by 1:1 water-methanol followed by 0.1 M hydrochloric (HCl) acid. Total arsenic in plant and soil samples collected from contaminated sites was mineralized by acid digestion and detected by inductively coupled plasma-atomic emission spectrometry (ICP-AES) and hydride generation-atomic absorption spectrometry (HG-AAS). Arsenic speciation was done by high performance liquid chromatography coupled with HG-AAS (HPLC-HGAAS) and by HPLC coupled with ICP-mass spectrometry (HPLC-ICP-MS). Spike recovery experiments with arsenite (As(III)), arsenate (As(V)), methylarsonic acid (MA) and dimethylarsinic acid (DMA) showed stability of the species in the extraction processes. Speciation analysis by X-ray absorption near edge spectroscopy (XANES) demonstrated that no transformation of As(III) and As(V) occurred due to sample handling. Dilute HCl was efficient in extracting arsenic from plants; however, extraction and determination of organic species were difficult in this medium. Sequential extraction with 1:1 water-methanol followed by 0.1 M-HCl was most useful in extracting and speciating both organic and inorganic arsenic from plants. Trace amounts of MA and DMA in plants could be detected by HPLC-HGAAS aided by the process of separation and preconcentration of the sequential extraction method. Both organic and inorganic arsenic compounds could be detected simultaneously in synthetic gastric fluid extracts (GFE) but EEs by this method were lower than those of the sequential method. The developed sequential method was shown to be reliable and applicable to various terrestrial plants for arsenic extraction and speciation.