The hydrogel containing a novel vesicle‐like soft crosslinker,a “trilayered” polymeric micelle,shows characteristic rheological properties

We have developed a novel hydrogel that is formed from a crosslinkable trilayered polymeric micelle and a polyamine for the sustained release of hydrophilic compounds. This hydrogel is quite unique because the vesicle‐like structure of the trilayered polymeric micelle acts as not only a crosslinker of the hydrogel but also a container of hydrophilic compounds. The hydrogel is rapidly formed by mixing both the trilayered polymeric micelle solution and the polyamine solution. The gelation property of the hydrogel, such as the storage modulus, can be changed by tuning the molecular weights, concentrations, and pH of the dissolving solvent of the hydrogel's constituent components. Furthermore, it is clarified that the structural difference among the micelles acting as crosslinkers affects the gelation property of the hydrogel. Amazingly, the hydrogel that is formed from the trilayered polymeric micelles possessing a vesicle‐like flexible structure exhibits a higher storage modulus than the hydrogel that is formed from the bilayered polymeric micelles possessing a highly packed, hard structure. Our results demonstrates that a microscopic structural difference of crosslinkers can induce a macroscopic (and, in some cases, an interesting and unexpected) change in the properties of the resulting hydrogels. For medical applications, the hydrogel proposed in the present article can encapsulate the hydrophilic compounds so that the hydrogel can be available as the material for their sustained release. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

pH-induced micelle formation of poly(histidine-co-phenylalanine)-block-poly(ethylene glycol) in aqueous media

Poly[(L-histidine)-co-(L-phenylalanine)]-block-poly(ethylene glycol) (HF-b-PEG) diblock copolymers were synthesized to be used for preparation of pH-sensitive polymeric micelles. First, HF block was synthesized by ring opening copolymerization of L-histidine and L-phenylalanine N-carboxyanhydride, and then the resulting copolymer was coupled with PEG. The pKa value of diblock copolymer can be controlled by adjusting the histidine/phenylalanine ratio in HF block. It is observed that the block copolymers form micelles in aqueous media and that the micelles are spherical in shape with a unimodal distribution. The micelle is formed at pH higher than pKa of block copolymer while it is not formed at lower pH. This is because the protonation of histidine residue in the HF block converts the hydrophobic core into hydrophilic one at lower pH. Acid-Base titration profile of HF41(5600)-b-PEG, HF56(5500)-b-PEG, H(5100)-b-PEG and 0.1 N NaCl.     

Effect of structure of PEO-PPO-PEO copolymers on reverse micelle formation induced by compressed CO2

The micellization of PEO-PPO-PEO block copolymers in p-xylene has been studied in the presence of CO2. With the application of CO2, some copolymers with suitable molecular weights and EO ratios can form reverse micelles with critical micellization pressure up to 5.8 MPa. For the copolymers with the same length of PO block, higher EO ratios facilitate reverse micelle formation. For the copolymers with the same composition, higher molecular weight is favorable to form reverse micelles. With the suitable composition and molecular weight, the critical micelle pressure (CMP) of copolymers decreases with the increase in the lengths of PEO and PPO blocks due to the hydrophilic and folding effects, respectively. Both the EO ratios and the molecular weights are important for the formation of reverse micelle. The reverse micelle solution can solubilize water with W0 (molar ratio of water to EO segment) up to 3.3.     

Effects of block architecture and composition on the association properties of poly(oxyalkylene) copolymers in aqueous solution

A block copolymer of hydrophilic poly(ethylene oxide) and a hydrophobic poly(alkylene oxide) can associate in dilute aqueous solution to form micelles. The results of recent investigations of the micellisation behaviour and micelle properties of such copolymers are described. Copolymers of ethylene oxide with propylene oxide, 1,2‐butylene oxide or styrene oxide are considered, including aspects of their preparation. Experimental methods for determination of critical conditions for micellisation, micelle association number and spherical‐micelle radius are summarised. Effects of temperature, composition, block length and block architecture (diblock, triblock and cyclic‐diblock) are described and, where possible, related to the predictions of theory. Brief consideration is given to the dynamics of micelle formation/dissociation, to cylindrical micelles, and to effects of added salts.     

Conventional synthesis of amphiphilic block copolymer utilized for polymeric micelle by mechanochemical solid-state polymerization

The first example is presented here of an amiphiphilic block copolymer synthesized by mechanochemical solid-state polymerization and used to form polymeric micelles. A model amphiphilic block copolymer was synthesized first, possessing galactose as a hydrophilic side chain and theophylline as a hydrophobic side chain, by mechanochemical solid-state polymerization. The resulting copolymer had a narrow molecular weight distribution. Polymeric micelle formation was subsequently carried out with the copolymer by a dialysis method. To gain insight into the physicochemical properties of the polymeric micelle, dynamic light scattering (DLS) measurements were performed. A narrow distribution of diameters was observed in the polymeric micelle solution, and these micelles were disrupted by the addition of sodium dodecyl sulfate (SDS). It was also confirmed by DLS measurements that the polymeric micelles were spherical. These results suggested that the block copolymer synthesized by mechanochemical solid-state polymerization was as suitable for the preparation of polymeric micelles as materials obtained by living polymerization.     

Study of hierarchical microstructures self-assembled by π-shaped ABC block copolymers in dilute solution using self-consistent field theory

Microstructures self-assembled by amphiphilic ABC π-shaped block copolymers in dilute solution have been investigated by self-consistent field theory. The effects of architectural parameters and the interaction strength among the three blocks have been studied systematically. Our calculation results show that the distance of the two graft blocks has stronger effect than the length of graft blocks and the position of the first graft point on the phase behavior. The interaction strength among the three blocks is another important factor in controlling the resulting microstructures. Compound-core, multicompartment, and multicore micelles are observed in the case of π-shaped ABC block copolymers with hydrophilic backbone block A and hydrophobic graft blocks B and C. Core-shell-corona, incomplete skin-layered and hamburger micelles are formed when graft block C is hydrophilic and blocks A and B are hydrophobic. The wormlike multicore micelles have drawn our attention. We find that the morphology of wormlike multicore micelle can be controlled by changing the distance of the two graft blocks of the π-shaped block copolymers. In all of the wormlike multicore micelles, the streamline wormlike micelle is more stable than other wormlike micelles from the free energy analysis.     

Synthesis and Self-Assembly Behaviors of Four-Arm Star Block Copolymers Poly(ϵ-caprolactone)-b-poly(2- (diethylamino) ethyl methacrylate)) in Aqueous Solution

Four-arm star block polymers consisting of hydrophobic poly(?-caprolactone) (PCL) block and hydrophilic poly(2-(diethylamino) ethyl methacrylate)) (PDEAEMA) block were successfully synthesized by ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Chain lengths of PDEAEMA segments were varied to obtain a series of star copolymers with different hydrophilic/hydrophobic ratio, which were desired for self-assembly study. Dynamic light scattering (DLS) and transmission electron microscopic (TEM) were used to study their self-assembly behavior. In the PBS solution with different pH value, the star polymers formed micelles or nanoparticles. Furthermore, the morphologies of the micelles were also pH-dependent. Critical micelle concentrations of star copolymers changed from 5.0 to 17.5 mg/L with the increase of hydrophilic block length or the pH decrease. Moreover, a steady increase was found on the micelles diameters when the pH decreased from 7.0 to 3.0. The low CMC value and slight changes on micelle diameter indicated that the micelle remained stable under the changing external stimulus.     

Water-dispersible, uniform nanospheres by heating-enabled micellization of amphiphilic block copolymers in polar solvents

Uniform nanospheres with tunable size down to 30 nm were prepared simply by heating amphiphilic block copolymers in polar solvents. Unlike reverse micelles prepared in nonpolar, oily solvents, these nanospheres have a hydrophilic surface, giving them good dispersibility in water. Furthermore, they are present as individual, separated, rigid particles upon casting from the solution other than continuous thin films of merged micelles cast from micellar solution in nonpolar solvents. These nanospheres were generated by a heating-enabled micellization process in which the affinity between the solvent and the polymer chains as well as the segmental mobility of both hydrophilic and hydrophobic blocks was enhanced, triggering the micellization of the glassy copolymers in polar solvents. This heating-enabled micellization produces purely well-defined nanospheres without interference of other morphologies. The micelle sizes and corona thickness are tunable mainly by changing the lengths of the hydrophobic and hydrophilic blocks, respectively. The heating-enabled micellization route for the preparation of polymeric nanospheres is extremely simple, and is particularly advantageous in producing rigid, micellar nanospheres from block copolymers with long glassy, hydrophobic blocks which are otherwise difficult to prepare with high efficiency and purity. Furthermore, encapsulation of hydrophobic molecules (e.g., dyes) into micelle cores could be integrated into the heating-enabled micellization, leading to a simple and effective process for dye-labeled nanoparticles and drug carriers.     

Non-ionic amphiphilic block copolymers by RAFT-polymerization and their self-organization

Water-soluble, amphiphilic diblock copolymers were synthesized by reversible addition fragmentation chain transfer polymerization. They consist of poly(butyl acrylate) as hydrophobic block with a low glass transition temperature and three different nonionic water-soluble blocks, namely, the classical hydrophilic block poly(dimethylacrylamide), the strongly hydrophilic poly(acryloyloxyethyl methylsulfoxide), and the thermally sensitive poly(N-acryloylpyrrolidine). Aqueous micellar solutions of the block copolymers were prepared and characterized by static and dynamic light scattering analysis (DLS and SLS). No critical micelle concentration could be detected. The micellization was thermodynamically favored, although kinetically slow, exhibiting a marked dependence on the preparation conditions. The polymers formed micelles with a hydrodynamic diameter from 20 to 100 nm, which were stable upon dilution. The micellar size was correlated with the composition of the block copolymers and their overall molar mass. The micelles formed with the two most hydrophilic blocks were particularly stable upon temperature cycles, whereas the thermally sensitive poly(N-acryloylpyrrolidine) block showed a temperature-induced precipitation. According to combined SLS and DLS analysis, the micelles exhibited an elongated shape such as rods or worms. It should be noted that the block copolymers with the most hydrophilic poly(sulfoxide) block formed inverse micelles in certain organic solvents.     

Looped structure of flowerlike micelles revealed by 1H NMR relaxometry and light scattering

We present experimental proof that so-called "flowerlike micelles" exist and that they have some distinctly different properties compared to their "starlike" counterparts. Amphiphilic AB diblock and BAB triblock copolymers consisting of poly(ethylene glycol) (PEG) as hydrophilic A block and thermosensitive poly(N-isopropylacrylamide) (pNIPAm) B block(s) were synthesized via atom transfer radical polymerization (ATRP). In aqueous solutions, both block copolymer types form micelles above the cloud point of pNIPAm. Static and dynamic light scattering measurements in combination with NMR relaxation experiments proved the existence of flowerlike micelles based on pNIPAm(16kDa)-PEG(4kDa)-pNIPAm(16kDa) which had a smaller radius and lower mass and aggregation number than starlike micelles based on mPEG(2kDa)-pNIPAm(16kDa). Furthermore, the PEG surface density was much lower for the flowerlike micelles, which we attribute to the looped configuration of the hydrophilic PEG block. (1)H NMR relaxation measurements showed biphasic T(2) relaxation for PEG, indicating rigid PEG segments close to the micelle core and more flexible distal segments. Even the flexible distal segments were shown to have a lower mobility in the flowerlike micelles compared to the starlike micelles, indicating strain due to loop formation. Taken together, it is demonstrated that self-assemblies of BAB triblock copolymers have their hydrophilic block in a looped conformation and thus indeed adopt a flowerlike conformation.     

Cylindrical micelles of alpha-fluorocarbon-omega-hydrocarbon end-capped poly(N-acylethylene imine)s

Micelles of ABC block copolymers with varying degrees of polymerization of the B block (n) and constant lengths of the A and C blocks were investigated by small-angle X-ray scattering (SAXS), analytical ultracentrifugation (AUC), surface tension measurements, and isothermal titration calorimetry. The copolymers consisting of hydrophilic poly(N-acylethylene imine)s, end-capped with a hydrophobic fluorocarbon and a hydrocarbon block, are polymeric surfactants (gamma = 35 mN/m). They form cylindrical micelles with radii of 3.0 nm (n = 35), 3.8 nm (n = 57), and 4.0 nm (n = 72). Their lengths are about 20 nm. The micelles can be doped with 1,4-diiodoperfluorobutane for the polymers with n = 57 and 72 but not for n = 35. We assume that the doped micelles form distinct fluorocarbon domains, which are able to incorporate selectively the fluorocarbon dopant. The work presented here is a contribution to the development of multicompartment micelles.     

New amphiphilic diblock copolymers: surfactant properties and solubilization in their micelles

Several series of amphiphilic diblock copolymers are investigated as macrosurfactants in comparison to reference low-molar-mass and polymeric surfactants. The various copolymers share poly(butyl acrylate) as a common hydrophobic block but are distinguished by six different hydrophilic blocks (one anionic, one cationic, and four nonionic hydrophilic blocks) with various compositions. Dynamic light scattering experiments indicate the presence of micelles over the whole concentration range from 10(-4) to 10 g x L(-1). Accordingly, the critical micellization concentrations are very low. Still, the surface tension of aqueous solutions of block copolymers decreases slowly but continuously with increasing concentration, without exhibiting a plateau. The longer the hydrophobic block, the shorter the hydrophilic block, and the less hydrophilic the monomer of the hydrophilic block is, the lower the surface tension is. However, the effects are small, and the copolymers reduce the surface tension much less than standard low-molar-mass surfactants. Also, the copolymers foam much less and even act as anti-foaming agents in classical foaming systems composed of standard surfactants. The copolymers stabilize O/W emulsions made of methyl palmitate as equally well as standard surfactants but are less efficient for O/W emulsions made of tributyrine. However, the copolymer micelles exhibit a high solubilization power for hydrophobic dyes, probably at their core-corona interface, in dependence on the initial geometry of the micelles and the composition of the block copolymers. Whereas micelles of copolymers with strongly hydrophilic blocks are stable upon solubilization, solubilization-induced micellar growth is observed for copolymers with moderately hydrophilic blocks.     

Micelles of imidazolium-functionalized polystyrene diblock copolymers investigated with neutron and light scattering

We synthesize a series of block copolymers comprising a polystyrene (PS) block and an imidazolium-functionalized PS (IL) block and characterize their assembly properties. We use small-angle neutron scattering and dynamic light scattering to determine the micelle size and shape in dilute solutions and to assess the micelle interactions in concentrated solutions. By studying a series of copolymers with fixed PS block length, we find that the length of the IL block governs the micelle dimensions. Our data suggest that these copolymers form elongated micelle structures where the IL block is extended in the micelle core. We find that these micelles can sequester water and that interactions between the micelles lead to structure factor peaks at elevated concentrations.     

A neutron scattering study of the structure and water partitioning of selectively deuterated copolymer micelles

We present a scattering study of a selectively deuterated micelle-forming diblock copolymer. The copolymer comprises a partially deuterated polystyrene (d,h-PS) block and an imidazolium-functionalized PS (IL) block. In toluene solutions, the copolymers assemble into elongated micelles where the IL block forms the micelle core. Through dynamic light scattering (DLS) measurements, we obtain the overall size of the micelles. In our small-angle neutron scattering (SANS) studies, we use contrast matching to characterize the IL core and the PS shell of the micelles independently. The PS block forming the micelle shell exhibits either a starlike or brushlike conformation depending upon the size of the core to which it is tethered. We find the IL block to be in an extended conformation, driving the formation of slightly elongated and relatively stiff micelle cores. The elongated micelle core cross-sectional radius and length depend linearly on the length of the IL block. We find that the micelles can sequester a few water molecules for each IL repeat unit; the addition of water slightly increases the cross section of the elongated micelles.     

Self-assembled nanocages for hydrophilic guest molecules

Reverse polymeric micelles are obtained following the association of polymeric amphiphiles in apolar media. To this date, reports of pharmaceutical applications for such micelles have been scarce, mainly because these systems have been studied in solvents that are not suitable for medical use. Here, alkylated star-shaped poly(glycerol methacrylate) polymers have been proposed in the design of oil-soluble reverse polymeric micelles. Micellar behavior was studied in various apolar solvents, including ethyl oleate, a pharmaceutically acceptable vehicle. The polymers were shown to assemble into spherical nanostructures (<40 nm) as determined by cryogenic transmission electron microscopy and atomic force microscopy studies. Interestingly, the reverse micelles were able to encapsulate various peptides/proteins (vasopressin, myoglobin, and albumin) in substantial amounts and facilitate their solubilization in oil. The nature of both the polymer used in micelle formation and the guest molecules was found to influence the ability of the micelle to interact with hydrophilic compounds.     

Carbon monoxide-releasing micelles for immunotherapy

With the discovery of important biological roles of carbon monoxide (CO), the use of this gas as a therapeutic agent has attracted attention. However, the medical application of this gas has been hampered by the complexity of the administration method. To overcome this problem, several transition-metal carbonyl complexes, such as Ru(CO)(3)Cl(glycinate), [Ru(CO)(3)Cl(2)](2), and Fe(η(4)-2-pyrone)(CO)(3), have been used as CO-releasing molecules both in vitro and in vivo. We sought to develop micellar forms of metal carbonyl complexes that would display slowed diffusion in tissues and thus better ability to target distal tissue drainage sites. Specifically, we aimed to develop a new CO-delivery system using a polymeric micelle having a Ru(CO)(3)Cl(amino acidate) structure as a CO-releasing segment. The CO-releasing micelles were prepared from triblock copolymers composed of a hydrophilic poly(ethylene glycol) block, a poly(ornithine acrylamide) block bearing Ru(CO)(3)Cl(ornithinate) moieties, and a hydrophobic poly(n-butylacrylamide) block. The polymers formed spherical micelles in the range of 30-40 nm in hydrodynamic diameter. Further characterization revealed the high CO-loading capacity of the micelles. CO-release studies showed that the micelles were stable in physiological buffer and serum and released CO in response to thiol-containing compounds such as cysteine. The CO release of the micelles was slower than that of Ru(CO)(3)Cl(glycinate). In addition, the CO-releasing micelles efficiently attenuated the lipopolysaccharide-induced NF-κB activation of human monocytes, while Ru(CO)(3)Cl(glycinate) did not show any beneficial effects. Moreover, cell viability assays revealed that the micelles significantly reduced the cytotoxicity of the Ru(CO)(3)Cl(amino acidate) moiety. This novel CO-delivery system based on CO-releasing micelles may be useful for therapeutic applications of CO.     

Self-assembled polypeptide-block-poly(vinylpyrrolidone) as prospective drug-delivery systems

Poly(β-benzyl-l-aspartate)-block-poly(vinylpyrrolidone) diblock copolymers (PAsp(OBzl)-b-PVP) having both hydrophobic and hydrophilic segments of various lengths were synthesized by a combination of ATRP and ROP. These amphiphilic diblock copolymers formed polymeric micelles consisting of a hydrophobic PAsp(OBzl) core and a hydrophilic PVP shell in aqueous solution. The block copolymer was characterized using ¹H NMR and gel permeation chromatography (GPC) analysis. Due to its core–shell structure, this block polymer forms unimolecular micelles in aqueous solutions. The micelle properties of PAsp(OBzl)-b-PVP diblock copolymer were extensively studied by dynamic light scattering (DLS), fluorescence spectroscopy, and transmission electron microscopy (TEM). PAsp(OBzl)-b-PVP copolymers displayed the lowest CMC and demonstrated little cytotoxicity when exposed to SW-1990 pancreatic cancer cells. In order to assess its application in biomedical area, the anti-inflammation drug prednisone acetate was loaded as the model drug in the polymeric nanoparticles. In vitro release behavior of prednisone acetate was investigated, which showed a dramatic responsive fast/slow switching behavior according to the pH-responsive structural changes of a micelle core structure. All of theses features are quite feasible for utilizing it as a novel intelligent drug-delivery system.     

Interaction between block copolymer micelles and azobenzene-containing surfactants: from coassembly in water to layer-by-layer assembly at the interface

In this paper, we describe the use of block copolymer micelles to incorporate Azo-AOT, an azobenzene-containing amphiphile having a structure suitable for reverse micelle formation and the fabrication of polyelectrolyte/micelle multilayer films. Interestingly, it is found that the PS21-PAA157 micelles can incorporate more Azo-AOT molecules than the PS115-PAA15 micelles, which is different from the case of incorporation of noncharged hydrophobic molecules. Moreover, Azo-AOT incorporated into the PS21-PAA157 micelles undergoes a faster photoisomerization than in the PS115-PAA15 micelles, which seems to be related to different aggregation states of Azo-AOT in the two micelles. From the data of UV-vis spectra, we can infer that Azo-AOT adopts a reverse micelle-like aggregation state in the PS115-PAA15 micelles and disperses in the interface between the core and corona of PS21-PAA157 micelles. These polyelectrolyte/micelle films incorporating functional amphiphiles have great potential in the field of functional thin films.     

Dissipative particle dynamics simulations of toroidal structure formations of amphiphilic triblock copolymers

In this paper, the dynamic assembly of toroidal micelle structures of amphiphilic triblock copolymers in dilute solution has been investigated using dissipative particle dynamics simulations. The amphiphilic molecule is represented by a coarse-grained model, which contains hydrophilic and hydrophobic particles. Some microstructures of complex morphology having toroidal micelles have been observed in the simulations; the toroidal micelle formation is in accordance with the theoretical prediction of the toroidal structure in cylindrical micelle suspensions by Pochan et al. (Science 2004, 306, 94). These findings are very interesting, and these complex morphologies enrich our knowledge of the potential products obtained from the self-assembly of block copolymers.     

A microfluidic platform for integrated synthesis and dynamic light scattering measurement of block copolymer micelles

Microfluidic devices were developed that integrate the synthesis of well defined block copolymers and dynamic light scattering (DLS) measurement of their micelle formation. These metal devices were designed to operate in contact with organic solvents and elevated temperatures for long periods, and thus were capable of continuous in-channel atom transfer radical polymerization (ATRP) of styrene and (meth)acrylate homopolymers and block copolymers. These devices were equipped with a miniaturized fiber optic DLS probe that included several technology improvements, including a measurement volume of only 4 microlitres, simple alignment, and reduced multiple scattering. To demonstrate the integrated measurement, poly(methyl methacrylate-b-lauryl methacrylate) and poly(methyl methacrylate-b-octadecyl methacrylate) block copolymers were processed on the device with a selective solvent, dodecane, to induce micelle formation. The in situ DLS measurements yielded the size and aggregation behavior of the micelles. For example, the block copolymer solutions formed discrete micelles (D(H) approximately = 25 nm) when the corona block was sufficiently long (f(MMA) < 0.51), but the micelles aggregated when this block was short. This study demonstrates the utility of these new devices for screening the solution behavior of custom synthesized polymeric surfactants and additives.