X-射线荧光光谱背景和基体效应综合校正公式

本文根据散射内标和公共背景法的有关理论,导出了两个X-射线荧光光谱分析校正方程,将背景、基体吸收和重叠干扰校正,以及校正曲线定量分析等多种运算合并进行,因而应用起来十分简便,两个方程在数学形式上与目前使用的X-射线光谱仪计算机程序中通用的数学模型相似,便于推广应用。     

The use of internal standards in ICP-MS

Careful study of the matrix effect in ICP-MS showed that, in all cases studied, the magnitude of the signal suppression or enhancement depends in a regular way on the mass number. Hence, accurate correction for non-spectral interferences is only possible using an internal standard with mass number close to that of the analyte element(s). It is also shown that using an internal standard with mass number close to that of the analyte improves the precision. For both cases, the ionization energy of the internal standard seems to be of no or only secondary importance. To obtain optimal precision and accuracy, the internal standard should be selected as close in mass number as possible to that of the analyte element(s). When a number of elements over a considerable mass range are to be determined, several internal standards have to be used.     

Accurate and precise spectrochemical analysis of Bi-Pb-Sr-Ca-Cu-O high-temperature superconductor materials

For quality tests of ceramic Bi-Pb-Sr-Ca-Cu-O superconductor materials (precursors and final products) accurate stoichiometric determinations of the metallic major components are necessary. Three methods were developed during the last decade in our group. Their properties and the results obtained are compared. The first classical analytical procedure requires to much manpower. The second combined chemical-spectrometric procedure is a routine method today, but also unsuitable for rapid tests. A new fully spectrometric procedure was recently developed using a simultaneously working Echelle spectrometer with CID detector, autosampler and a special self-made data evaluation software. The basis of this method are multi-line measurements of each analyte element, a new method of spectral line selection for main component precision determinations, multi-component calibrations, and frequent external standardizations. For this method the sum of the confidence intervals of all element determinations was less than 1%, and no systematic error was detected.     

Matrix effects in the analysis of biological matrices by axial view inductively coupled plasma optical emission spectrometry

We are reporting observations of positive and negative variations of emission line intensities during the determination of boron and titanium in biological matrices by axial view inductively coupled plasma optical emission spectrometry with segmented charge-coupled device detection. The study included the testing of several elements (yttrium, palladium and platinum) and analytical wavelengths for internal standardization, aiming to compensate for variations in signal recovery due to matrix interferences. Human albumin was chosen as principal matrix component to assess the effect of variable chemical and instrumental operating conditions on boron response. A parametric study was performed by considering the application of two different nebulizer–aerosol chamber systems, the effect of plasma operating conditions on analyte and internal standard signals and the influence of common blood plasma electrolytes, added as salts of alkaline or alkaline earth elements. The pneumatic injection systems tested were a standard cross-flow nebulizer with a Scott type spray chamber and a concentric Meinhard type device coupled to a glass cyclonic spray chamber. The change from standard (i.e. medium RF power and relatively high aerosol carrier gas flow rate) to robust (i.e. higher RF power and lower carrier gas flow rate) conditions contributed to large, non-correlated variations in boron intensities and in some of the analyte/internal standard ratios. Significant memory effects were observed for injection of boron solutions prepared with boric acid and containing small amounts of acid, but those effects were negligible when the boron carrier compound was boronophenylalanyne. The injection of titanium solutions did not produce analyte carry-over effects. When internal standards were employed, a less effective signal compensation was consistently observed for boron at higher albumin concentrations when the difference in energies of the lines was between 4.5 and 6 eV. This effect was enhanced for some line pairs when robust conditions are employed. Differences in the response between nebulizers were minor, with a slight advantage in sensitivity for the cross-flow/Scott system. Yttrium was found to be useful for signal compensation in the determination of boron and titanium in blood and human plasma provided that the equivalent concentration of albumin in the nebulized sample dilutions was kept below 0.2% w/v. Simultaneous measurement of a reference strontium line was found to be useful as an additional verification of the response of yttrium as internal standard.     

Simultaneous correction for drift and non-spectroscopic matrix effect in the measurement of geological samples by inductively coupled plasma-mass spectrometry using common analyte internal standardization chemometric technique

The common analyte internal standardization (CAIS) chemometric technique is extended to correct for drift in signal intensity in inductively coupled plasma-mass spectrometry. The CAIS technique is used because, unlike the conventional internal reference method, it allows for the analyte to behave differently from the internal reference under the influence of drift. Thus, only one internal reference element is sufficient to correct for drift effect for all the analytes irrespective of the difference of their mass and ionization potential from that of the internal reference element. Experimental test with 15 analytes, as a representative of the whole mass range, in different geological matrices, using only indium as internal reference element, demonstrates that the developed drift correction method is efficient in correcting up to 25% drift error and is easy to use. Further, a CAIS scheme was developed to correct for both drift and non-spectroscopic matrix effects simultaneously in a single run, using standard containing no matrix. This scheme is based on the use of two internal reference elements for simultaneous monitoring and correction of drift and matrix effects for all the analytes irrespective of their difference in mass and ionization potential from the two internal reference elements. The developed scheme was validated using river water samples containing appreciable matrix concentration and was measured under the influence of drift. The results of the experimental validation indicate that the proposed scheme is capable of removing error as large as 43% that arises from drift and non-spectroscopic matrix effects.     

Improved accuracy for the analysis of soft magnetic alloys by inductively-coupled plasma atomic emission spectrometry by using advanced standardization procedures

The applicability of simultaneous ICP-OES for the accurate analysis of soft magnetic alloys has been investigated. Long-time signal variations of up to 40% can be observed under normal operating conditions. The scattering of the values can largely be compensated by a correction procedure with internal and external standardization where the intensity value of the analytical signal is first rationed to the simultaneously measured intensity of an internal standard line and after that recalibrated with an external standard. Not only the trueness but also the precision could be improved by using Cd as a real-time internal standard. This is attributed to a compensation for instrumental fluctuations as a result of the simultaneous measurement of both emission signals.     

Improved accuracy for the analysis of soft magnetic alloys by inductively-coupled plasma atomic emission spectrometry by using advanced standardization procedures

The applicability of simultaneous ICP-OES for the accurate analysis of soft magnetic alloys has been investigated. Long-time signal variations of up to 40% can be observed under normal operating conditions. The scattering of the values can largely be compensated by a correction procedure with internal and external standardization where the intensity value of the analytical signal is first rationed to the simultaneously measured intensity of an internal standard line and after that recalibrated with an external standard. Not only the trueness but also the precision could be improved by using Cd as a real-time internal standard. This is attributed to a compensation for instrumental fluctuations as a result of the simultaneous measurement of both emission signals.     

Extending the dynamic range of proton transfer reaction time-of-flight mass spectrometers by a novel dead time correction

Proton transfer reaction time-of-flight mass spectrometry (PTR-TOF-MS) allows for very fast simultaneous monitoring of volatile organic compounds (VOCs) in complex environments. In several applications, food science and food technology in particular, peaks with very different intensities are present in a single spectrum. For VOCs, the concentrations range from the sub-ppt all the way up to the ppm level. Thus, a large dynamic range is necessary. In particular, high intensity peaks are a problem because for them the linear dependency of the detector signal on VOC concentration is distorted. In this paper we present, test with real data, and discuss a novel method which extends the linearity of PTR-TOF-MS for high intensity peaks far beyond the limit allowed by the usual analytical correction methods such as the so-called Poisson correction. Usually, raw data can be used directly without corrections with an intensity of up to about 0.1 ions/pulse, and the Poisson correction allows the use of peaks with intensities of a few ions/pulse. Our method further extends the linear range by at least one order of magnitude. Although this work originated from the necessity to extend the dynamic range of PTR-TOF-MS instruments in agro-industrial applications, it is by no means limited to this area, and can be implemented wherever dead time corrections are an issue.     

Evaluation and application of bismuth as an internal standard for the determination of lead in wines by simultaneous electrothermal atomic absorption spectrometry

A method for the direct determination of Pb in wines by simultaneous multi-element atomic absorption spectrometry (SIMAAS) using a transversely heated graphite atomizer, Zeeman-effect background corrector and internal standardization is proposed. Bismuth was used as an internal standard and Pd(NO3)2 plus Mg(NO3)2 as chemical modifier to stabilize both the analyte and the internal standard. The implementation of two pyrolysis steps avoided any build-up of carbonaceous residues on the graphite platform. All diluted samples (1 + 1 v/v) in 0.2% v/v HNO3 and reference solutions (5.0-50 microg l(-1) Pb in 0.2% v/v HNO3) were spiked with 25 microg l(-1) Bi. For a 20 microl aliquot dispensed into the graphite tube, a good correlation (r = 0.9997) was obtained between the ratio of the analyte signal to the internal standard signal and the analyte concentration of the reference solutions. The electrothermal behaviour of Pb and Bi in red, white and rosé wines were compared. In addition, absorbance variations due to changes in experimental conditions, such as atomizer temperature, integration time, injected sample volume, radiation beam intensity, graphite tube surface, dilution and sample composition, were minimized by using Bi as internal standard. Relative standard deviations of measurements based on integrated absorbance varied from 0.1 to 3.4% and from 0.5 to 7.3% (n = 12) with and without internal standard correction, respectively. Good recoveries (91-104%) for Pb spikes were obtained. The characteristic mass was 45 pg Pb and the limit of detection based on integrated absorbance was 0.9 microg l(-1) Pb. Internal standardization increased the lifetime of the tube by 25%. Direct determinations of Pb in wines with and without internal standardization approaches were in agreement at the 95% confidence level. The repeatability and the tube lifetime were improved when using Bi as internal standard. The improvement in accuracy using an internal standard was only observed when the analytical results were affected by errors.     

Study to reduce laser-induced breakdown spectroscopy measurement uncertainty using plasma characteristic parameters

Using standard brass alloy samples, an approach to reduce the laser-induced breakdown spectroscopy measurement uncertainty was tested and proved. Two important parameters for plasma characterization, the plasma temperature and the electron density, were applied to minimize the signal uncertainties due to uncontrollable experimental parameter variations. Results show that for the pulse-to-pulse analysis, the signal fluctuations can be significantly reduced by utilizing the plasma characteristic information. The major source for the single pulse fluctuations is the redistribution of the characteristic line at different temperatures according to the Boltzmann distribution under LTE. The change of the degree of ionization also contributes to the signal fluctuations. For the multi-pulse analysis, due to the nonlinear relationship between the plasma temperature and the line intensity, it is not applicable to utilize the Boltzmann distribution to reduce the influences of the plasma properties. However, normalization with the combination of the whole spectrum area and the ratio between the ion and atom number density of the same element can further increase the measurement accuracy.     

The determination of chromium, copper and nickel in groundwater using axial plasma inductively coupled plasma atomic emission spectrometry and proportional correction matrix effect reduction

The performance of a proportional correction matrix effect reduction procedure was investigated for an axially viewed inductively coupled plasma. It was shown that the proportional correction factor (ratio of analyte matrix effect and internal standard matrix effect) was sufficiently stable over the investigated matrix element concentration ranges (0–2000 mg/L of Na and 0–400 mg/L of Ca) for the procedure to be successful. Proportional correction results in the best correction for matrix effects compared to the classical 1?:?1 intensity ratio correction procedure or the approach without any correction, as was shown in recovery experiments using analyte spiked groundwater samples. Matrix effects as high as 18% without correction were reduced to less than 4% applying proportional correction.     

Comparison between vacuum sublimed matrices and conventional dried droplet preparation in MALDI-TOF mass spectrometry

The properties of several cinnamic acid compounds used as matrices for matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) were investigated as standard dried droplet (DD) and vacuum sublimed preparations. The differences between both preparation methods were analyzed with regard to matrix grain size, internal ion energy, initial velocity, analyte intensity, and analyte incorporation depth. Some of the used cinnamic acid derivatives exhibit clearly reduced grain sizes as sublimed preparations compared with standard DD approaches. In these cases higher effective temperatures could be measured accompanied by increased analyte intensities, which can be explained by stronger volatilization processes caused by a hindered heat dissipation resulting in a raised analyte transfer into the gas phase. For all sublimed compounds, a strong increase of the initial ion velocity compared with DD preparations could be measured. Higher initial ion velocities correlate with a decrease in internal ion energy which might be attributed to the very uniform crystal morphology exhibited by sublimed compounds. For sublimed matrices without reduced grain size, at least slightly higher analyte intensities could be detected at raised laser fluences. Analyte accumulation in the uppermost matrix layers or the detected higher ion stability can be explanations for these results.     

Correlation study of internal standardization in inductively coupled plasma atomic emission spectrometry

Correlation studies (calculation of the cross-correlation function and correlation coefficients) were carried out between fluctuations in the emission signals from various analyte and internal standard elements. Some statistics are presented which may help give a clearer picture of the utility of the internal standard principle. Improvements in precision brought about by the use of suitable standards are in the region of a factor of two. The use of argon emission lines as internal standards does not prove effective as an inverse correlation is observed between the emission of these lines and analyte lines.     

Net analyte signal standard addition method (NASSAM) as a novel spectrofluorimetric and spectrophotometric technique for simultaneous determination,application to assay of melatonin and pyridoxine

In this work a new modification of the standard addition method called “net analyte signal standard addition method (NASSAM)” is presented for the simultaneous spectrofluorimetric and spectrophotometric analysis. The proposed method combines the advantages of standard addition method with those of net analyte signal concept. The method can be applied for the determination of analyte in the presence of known interferents. The accuracy of the predictions against H-point standard addition method is not dependent on the shape of the analyte and interferent spectra. The method was successfully applied to simultaneous spectrofluorimetric and spectrophotometric determination of pyridoxine (PY) and melatonin (MT) in synthetic mixtures and in a pharmaceutical formulation.     

ICP－AES中内标法的应用研究 Ⅲ．用内标法校正基体干扰

通过观测基体对分析元素发射强度的干扰情况，分析干扰机制，从而确定用来校正基体干扰的内标元素与分析元素的匹配条件。实验结果表明，只要选择合适的内标元素，可以校正基体干扰。     

新型“内标”式双重荧光自组装膜的制备和DNA的界面传感

为了有效降低依据单一荧光强度定量分析的误差, 充分发挥自组装膜设计灵活、制备简单且分析灵敏度高的优点, 提高荧光定量分析的准确度和灵敏度, 本文提出构建“内标”式自组装膜, 即于硅烷化石英表面分别组装吖啶橙(AO)和量子点CdTe. 以AO为内标, CdTe为荧光探针, 通过静电吸引作用于AO和CdTe之间, 依次组装聚苯乙烯磺酸钠(PSS)和壳聚糖(CS). PSS和CS的组装有效地“屏蔽”了AO, 使其荧光强度I1不随分析物种浓度的引入而变化, 这样既可发挥荧光内标作用, 又使膜外层量子点CdTe的荧光强度I2随分析物种浓度的改变而改变. 所构建的自组装膜双重荧光强度比I2/I1不随激发光强度的波动和传感器位置的移动等微环境变化而变化, 但与被分析物种的浓度呈良好的线性关系, 从而实现了直接利用I2/I1准确定量的“内标”式荧光分析, 显著提高了荧光分析的准确度.     

Determination of some rare-earth elements by plasma-jet emission spectrometry

The effects of a magnetic field on spectral intensities in plasma-jet spectrometry were examined, and detection limits for rare-earth elements were calculated. Plasma-jet emission spectrometry was applied to the determination of lanthanum, yttrium and gadolinium in a monazite sample from which thorium had been separated. A standard addition method was used in order to improve accuracy, and the internal standard and background compensation method was applied to measurements of spectral line intensities to achieve good precision. The coefficient of variation was 1.51% for 50 μg La ml^?1.     

The determination of chromium, copper and nickel in groundwater using axial plasma inductively coupled plasma atomic emission spectrometry and proportional correction matrix effect reduction

The performance of a proportional correction matrix effect reduction procedure was investigated for an axially viewed inductively coupled plasma. It was shown that the proportional correction factor (ratio of analyte matrix effect and internal standard matrix effect) was sufficiently stable over the investigated matrix element concentration ranges (0–2000 mg/L of Na and 0–400 mg/L of Ca) for the procedure to be successful. Proportional correction results in the best correction for matrix effects compared to the classical 1 : 1 intensity ratio correction procedure or the approach without any correction, as was shown in recovery experiments using analyte spiked groundwater samples. Matrix effects as high as 18% without correction were reduced to less than 4% applying proportional correction. Received: 22 February 1997 / Revised: 28 May 1997 / Accepted: 7 June 1997     

Determination of lithium in biological samples by inductively coupled plasma mass spectrometry

Lithium was determined in human serum by inductively coupled plasma mass spectrometry. Sample preparation was kept to the minimum: serum samples were diluted and beryllium was added as internal standard. Special attention was given to the choice of the internal standard and to the occurrence of memory effects. To test the accuracy of the method several biological reference materials were analysed, namely a “Second-Generation” Biological Reference Material (Freeze-Dried Human Serum) (University of Ghent), Human Serum SRM 909, Whole Egg Powder SRM 1845 and Mixed Human Diet SRM 1548 (National Institute of Standards and Technology). The results were compared with those obtained by other techniques. For the “second-generation” reference freeze-dried human serum a mean lithium concentration of 15.10 ng g^?1 with a standard deviation of 0.54 ng g^?1 dry weight was found. Analyses on serum samples from healthy individuals yielded lithium concentrations ranging from 0.22 to 0.97 μg l^?1.     

Accurate and precise spectrochemical analysis of Bi-Pb-Sr-Ca-Cu-O high-temperature superconductor materials

For quality tests of ceramic Bi-Pb-Sr-Ca-Cu-O superconductor materials (precursors and final products) accurate stoichiometric determinations of the metallic major components are necessary. Three methods were developed during the last decade in our group. Their properties and the results obtained are compared. The first classical analytical procedure requires to much manpower. The second combined chemical-spectrometric procedure is a routine method today, but also unsuitable for rapid tests. A new fully spectrometric procedure was recently developed using a simultaneously working Echelle spectrometer with CID detector, autosampler and a special self-made data evaluation software. The basis of this method are multiline measurements of each analyte element, a new method of spectral line selection for main component precision determinations, multi-component calibrations, and frequent external standardizations. For this method the sum of the confidence intervals of all element determinations was less than 1%, and no systematic error was detected.