One‐step synthesis of polymer micro‐tubes tethered by polymer nanowire networks via RAFT polymerization of N,N′‐methylene bisacrylamide xerogel fibers in toluene and ethanol mixed solution

In the mixed solution of toluene and ethanol, polymer micro‐tubes (PMTs) tethered by polymer nanowire networks (PTPWNs) were fabricated facilely via one‐step reversible addition fragmentation chain transfer (RAFT) polymerization by taking N,N′‐methylene bisacrylamide (MBA) xerogel fibers as both template and monomer source. The products were analyzed by FTIR, SEM, TEM, surface area and porosity analyzer, and contact angle tester. The results indicated that PTPWNs were obtained as the sole product at ethanol content of 1.0 wt %. As the content of ethanol increases from 0 to 1.0 wt %, the specific surface area of the products became higher, indicating more polymer nanowire networks (PWNs) on the tubes. At ethanol contents of 1.5 wt % and 2.0 wt %, some particles were also obtained besides PTPWNs. The formation process of PTPWNs was studied by analyzing the products obtained at different reaction time. The results revealed that PTPWNs were formed by two steps, PMTs were formed quickly and then PWNs formed in the solution tethered to the tubes. Moreover, the effect of RAFT agent on the morphologies of the products revealed that PTPWNs could be obtained via RAFT polymerization at suitable dosage of RAFT agent, while polymer particles were generated via conventional free radical polymerization. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1862–1868