N掺杂可见光化催化剂的研究

The N-doped, yellow colored titanium oxide photocatalysts were prepared with Ti(SO4)2 and NH4HCO3 as precursors by precipitation method. The photocatalytic ability under the irradiation of UV or visible light for the catalysts prepared was studied by degradation of styphnic acid. The materials were characterized by EDS, XRD, FTIR, UV-Vis DRS, and XPS. The results indicate that the photocatalytic ability of catalysts is improved, especially the ability of visible light response. The results of UV-Vis DRS show that the response wavelength range of N-dopped nitrogen is red shifted, the absorption region is expanded to 476 nm.     

PHOTOCATALYTIC HYDROGEN EVOLUTION FROM WATER SPLITTING UNDER VISIBLE LIGHT IRRADIATION ON NOVEL PHOTOCATALYST FULLENES-PVP-ZN0.999NI0.001S

Fullerenes (C60/C70) linked up to Ni-doped ZnS through the medium of an amphalic polymer polyvinyl pyrrolidone (PVP) to form a new kind of photocatalyst for hydrogen evolution from aqueous Na2S/Na2SO3 solution under visible light irradiation, the photocatalytic activities of this novel photocatalyst C60/C70-PVP-Zn0.999Ni0.001S are 3-5 fold higher compared with that of precurse catalyst Zn0.999Ni0.001S. This result could be attributed to Schottky barrier layer built between C60/C70 and Zn0.999Ni0.001S due to the electro-negativity of C60 and characteristic of being used as a multiple electron acceptor. C60 or C60/C70, its moiety, with its low energy first excited singlet state, is a good energy acceptor and in addition readily accepts multiple electrons, making it a potential electron accumulate as we know, which could protect the separation between electrons and holes against combination. This is an important reason for the marked increase of amount of H2 evolution during the photocatalytic process for the composite system C60/C70-PVP-Zn0.999Ni0.001S.     

可见光化的半导体光催化剂

光解水制氢能否实用化取决于太阳光的有效利用率, 研究开发可见光化的光催化剂成为当前光催化剂研究中的重要课题.本文介绍了利用 光解水制氢的反应机理,综述了近年来半导体光催化剂在利用可见光方面的研究进展,重点描述了这些光催化剂的结构,并对该领域今后的研究方向进行了展望.     

乙烯在纳米催化剂InVO4-TiO2上的可见光降解

The InVO₄-TiO₂ nano-crystalline photocatalyst was prepared by sol-gel method and characterized by DRS, FTIR, Raman and XRD. The photocatalytic activities of the prepared sample were investigated by photocatalytic degradation of ethylene in the gaseous phase under visible light irradiation (λ>450 nm). The results indicate that both of pure TiO₂ and InVO₄ or their simple mixture show no photocatalytic activities for degradation of ethylene under visible light irradiation. However, as-synthesized InVO₄-TiO₂ catalyzes the degradation of ethylene into CO₂ under visible light irradiation. In addition, the interaction between InVO₄ and TiO₂ results in some structural distortion to all the crystal forms of TiO₂ in as-synthesized catalyst InVO₄-TiO₂.     

可见光响应纳米TiO2光催化薄膜的研究进展

综述了近几年国内外可见光响应纳米TiO₂薄膜制备的研究现状,阐述了TiO₂薄膜光催化降解有机物的催化机理,系统地介绍了提高纳米TiO₂吸收波长的方法、常用载体、可见光响应纳米TiO₂薄膜制备方法和在降解有机物方面的应用,并概述了其以后的发展趋势.     

g-C3N4催化石墨化碳质材料的制备及光催化性能研究

通常采用以氢氧化物作为造孔剂,过渡金属硝酸盐或氯化物作为石墨化催化剂的传统两步法策略制备多孔石墨化碳材料。然而制备过程中多涉及有毒和腐蚀性试剂,且多步骤的过程耗时较长。本文以双氰胺为原料通过热缩聚反应得到g-C₃N₄,采用高铁酸钾为催化剂一步法实现g-C₃N₄的同步碳化-石墨化,并研究其光催化性能。与传统的两步法相比,该方法耗时少、效率高、无污染。与初始的g-C₃N₄材料相比,石墨化g-C₃N₄衍生碳质材料不仅显著改善了可见光的吸收,而且大大增强了光催化活性。研究了不同石墨化温度对g-C₃N₄衍生碳质材料在可见光下降解甲基橙溶液的影响。700 ℃下制备的衍生碳质材料的降解率为12.4 mg/g。光电化学测试结果表明,多孔g-C₃N₄衍生碳质材料的光生载流子密度、电荷分离和光电流(提高了5.4倍)均得到显著提高。因此,该简便、灵活方法为提高g-C₃N₄衍生碳质材料的吸附和光催化性能提供了一种有前景的、高效的途径。     

MIL-125(Ti)衍生介孔圆盘状N-TiO2高效光催化降解气态苯(英文)

挥发性有机污染物(VOCs)对人或动物的危害较大,具有致癌、致畸和致突变性.气固相光催化法已经成为一种具有广阔应用前景的VOCs治理技术.传统半导体光催化剂TiO₂带隙较宽(E_g=3.2 eV),太阳光利用效率低.特别是对光催化降解VOCs而言,反应过程中产生的含碳类中间产物易在TiO₂表面积累,致使其失活.因此,如何拓宽TiO₂的光谱响应范围,提高光量子效率及其在VOCs氧化过程中的循环利用性一直是研究重点.由于O和N具有类似的化学结构和电子特征,对TiO₂进行N掺杂(N-TiO₂)是实现TiO₂可见光催化的有效途径.TiO₂前驱体和氮源的种类对N-TiO₂的带隙、N掺杂位点、N掺杂量、形貌和孔径影响较大.金属-有机骨架(MOFs)具有结构多样且可调、多孔性、比表面积大等优点,是制备特定形貌和结构的光催化材料的理想自牺牲模板.同时,有机配体易于在高温煅烧过程中从MOFs骨架中释放,其衍生物...     

基于高次余弦散射分布的空间卫星可见光特性

基于几何光学和辐射理论,研究了空间卫星的可见光散射特性.空间卫星的背景辐射主要包括太阳的直接辐射和地球及大气的散射辐射,根据目标的结构特性与背景特性建立了空间卫星的几何模型和光照模型.分析目标表面状况,入射到目标表面的光线近似服从高次余弦散射分布,根据能量守恒定理及表面材料的高次余弦散射分布特性建立了目标散射特性的数学模型.通过矢量坐标变换确定太阳、地球、观测卫星在目标本体坐标系下的相对位置关系.根据给定的几何尺寸和表面物性参量仿真获得了目标在探测器入瞳处的能量分布及星等特征,目标本体与太阳帆板在探测器入瞳处的辐照度最大量级均为10-12 W/m2.仿真结果表明太阳帆板在目标特性分析时不可忽略,为空间目标的可见光探测提供参考数据.     

白术煎剂表面增强拉曼光谱分析

测试分析了白术煎剂及其在银胶中的拉曼光谱,并对其进行初步谱峰归属。白术煎剂表面增强拉曼光谱在396,548,617,730,955和1 327 cm-1处,出现6个明显的拉曼信号。测试了白术煎剂和白术煎剂-银胶混合体系的紫外-可见吸收光谱,该吸收光谱在长波区出现新共振吸收峰(999 nm处),进而研究了白术煎剂在银溶胶上的吸附特性及其表面增强机理。结果表明,表面增强拉曼光谱可能为白术煎剂或其他中药煎剂提供一种准确、直接、快速的检测方法。     

ZnFe2O4/Ag/TiO2复合材料的制备及其光催化性能

以硝酸银、钛酸四丁酯、无水氯化锌、六水氯化铁为原料,采用溶胶-凝胶法与溶剂热相结合的方法制备了ZnFe₂O₄/Ag/TiO₂复合材料,通过扫描电子显微镜、能谱分析仪、X射线粉末衍射仪、X射线光电子能谱仪、振动样品磁强计、紫外可见分光光度计对样品进行表征及测试。结果表明： ZnFe₂O₄/Ag/TiO₂-10具有最佳的光催化效果,在紫外和可见光下对染料的降解率都能达到90%以上,具有优异的紫外可见光光催化活性。ZnFe₂O₄/Ag/TiO₂具有独特的磁性,能在外部磁场作用下进行回收利用,这使其在实际应用中成为可能。通过磁分离技术重复回收利用5次后仍然保持优良的光催化性能,说明ZnFe₂O₄/Ag/TiO₂-10具有优异的磁性及较高的光催化循环稳定性。