Geometrically nonlinear dynamic analysis of the stiffened perovskite solar cell subjected to biaxial velocity impacts

Nonlinear Dynamics - The perovskite solar cell (PSC) is one of the most promising photovoltaic candidates along with the highly increasing demand for green electricity. One of the main concerns...     

Flower-like titanium dioxide as novel co-reaction accelerator for ultrasensitive “off–on” electrochemiluminescence aptasensor construction based on 2D g-C3N4 layer for thrombin detection

Journal of Solid State Electrochemistry - An ultrasensitive “signal-off–on” electrochemiluminescence (ECL) biosensor is constructed based on f1-TiO2/g-C3N4/PDA for thrombin...     

Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

血管内皮生长因子结合可降解壳聚糖治疗大鼠心肌梗塞的研究

摘要:目的 研 究 血 管 内 皮 生 长 因 子 ( vascular endothelial growth factor, VEGF ) 结 合 可 降 解 壳 聚 糖 ( degradablechitosan,DC)对心肌梗塞大鼠的治疗作用。 方法 将 32 只 SD 大鼠随机分为假手术组、模型组、VEGF 组和 VEGF+ DC 组,每组 8 只。 4 组大鼠均采用结扎冠状动脉左前降支的方法进行造模,其中假手术组只穿线不结扎。 造模后, 向模型组大鼠心肌注射 100 μL 生理盐水,VEGF 组大鼠于同一位置注射同体积 VEGF 溶液,VEGF+DC 组大鼠注射 VEGF+DC 溶液。 造模 4 周 后,对 所 有 实 验 大 鼠 进 行 超 声 心 功 能 检 测,考 察 左 心 室 收 缩 期 及 舒 张 期 前 壁 厚 度( LVAW;s 和 LVAW;d) 、左心室收缩期及舒张期内径( LVID;s 和 LVID;d) 、左心室收缩期及舒张期容积( LV Vol;s 和 LV Vol;d) 、左室射血分数( EF% )及短轴缩短率( FS% ) ,血流动力学考察左室舒张末压( EDP ) 和等容收缩期及 舒张期左心室内压力上升最大速率( + dp / dt 和 - dp / dt) ,计算左心室指数( LVM / BW) 并对心肌进行苏木素-伊红 ( HE)染色观察各组实验大鼠心肌病理变化。 结果 VEGF 组和 VEGF+DC 组大鼠的心肌梗塞均得到有效改善,其 中 VEGF+DC 组的改善作用更加显著。 结论 VEGF 结合 DC 对心肌梗塞大鼠的心功能具有改善作用,具有一定的治疗作用。     

基于不确定控制理论的最优策略研究

本文在不确定理论的框架下,研究一类带背景状态变量的最优控制模型.在乐观值准则下,利用不确定动态规划的方法,证明了不确定最优性原则,得到最优性方程.作为应用,求解一个固定缴费(DC)型养老金的最优投资策略问题,在乐观值准则下,以工资变量为背景状态变量,建立养老金模型.通过求解不确定最优性方程得到最优投资策略和最优支付率.     

A New Quassinoid from Brucea javanica

Chemistry of Natural Compounds - A new quassinoid, dehydrobruceantinol B (1), was isolated from the seeds of Brucea javanica, together with two known compounds, bruceantinol (2) and bruceine A (3)....     

Model averaging for linear models with responses missing at random

Annals of the Institute of Statistical Mathematics - In this paper, a model averaging approach is developed for the linear regression models with response missing at random. It is shown that the...     

位移放大型扭转阻尼器性能分析

为了加固梁柱节点、避免框架结构出现"弱节点"的破坏模式、提高框架结构整体的抗震和耗能能力,研制出一种具有自主知识产权的位移放大型扭转阻尼器(DATD),并对其进行数值分析和试验研究.首先,设计了18个具有不同参数的DATD,建立其有限元模型进行数值分析;随后,设计并制作了一个DATD,进行性能试验并与有限元分析结果对比.结果表明:DATD滞回曲线饱满,耗能能力强;有限元分析与性能试验的滞回曲线吻合较好,且随着加载位移的增加,两者间误差变小,因此可以采用建立的有限元模型来研究DATD的力学性能.最后,对DATD进行参数影响分析,研究了铅芯直径、铅芯距中轴距离、橡胶层直径、橡胶层厚度及橡胶剪切模量对其特征参数的影响,结果表明:DATD的屈服剪力、等效刚度、等效阻尼比及耗能系数随着铅芯直径增大而明显增大,随着铅芯距中轴距离的增大略有增大;随着橡胶层直径、橡胶剪切模量的增大,屈服剪力及等效刚度逐渐增大而耗能系数及等效阻尼比逐渐减小;4个特征参数均随着橡胶层厚度的增大而略微减小.     

Visible light-driven acridone catalysis for atom transfer radical polymerization

Acridone as a new kind of visible light photocatalyst has been developed to catalyze metal free atom transfer radical polymerization (ATRP). The photocatalyst possess low excited state potential as can undergo an oxidative quenching pathway to initiate ATRP of vinyl monomers. Kinetic study and light on/off reaction demonstrate the “living”/controlled nature of the polymerization by light. Block copolymers can be achieved by using PMMA as macroinitiator to reinitiate polymerization of other vinyl monomers, which shows highly preserved Br chain-end functionality in the synthesized polymers. Moreover, the polymerization can be conducted under air atmosphere as most photocatalysts need anaerobic condition, which may give inspiration of further application of this kind of photocatalyst.