排序方式: 共有20条查询结果,搜索用时 15 毫秒
1.
2.
Effects of the strain relaxation of an AlGaN barrier layer induced by various cap layers on the transport properties in AlGaN/GaN heterostructures 总被引:1,自引:0,他引:1 下载免费PDF全文
The strain relaxation of an AlGaN barrier layer may be influenced by a thin cap layer above, and affects the transport properties of AlGaN/GaN heterostructures. Compared with the slight strain relaxation found in AlGaN barrier layer without cap layer, it is found that a thin cap layer can induce considerable changes of strain state in the AlGaN barrier layer. The degree of relaxation of the AlGaN layer significantly influences the transport properties of the two-dimensional electron gas (2DEG) in AlGaN/GaN heterostructures. It is observed that electron mobility decreases with the increasing degree of relaxation of the AlGaN barrier, which is believed to be the main cause of the deterioration of crystalline quality and morphology on the AlGaN/GaN interface. On the other hand, both GaN and AlN cap layers lead to a decrease in 2DEG density. The reduction of 2DEG caused by the GaN cap layer may be attributed to the additional negative polarization charges formed at the interface between GaN and AlGaN, while the reduction of the piezoelectric effect in the AlGaN layer results in the decrease of 2DEG density in the case of AlN cap layer. 相似文献
3.
Nonpolar (1120) GaN films are grown on the etched a-plane GaN substrates via metalorganic vapor phase epitaxy. High-resolution X-ray diffraction analysis shows great decreases in the full width at half maximum of the samples grown on etched substrates compared with those of the sample without etching, both on-axis and off-axis, indicating the reduced dislocation densities and improved crystalline quality of these samples. The spatial mapping of the E2 (high) phonon mode demonstrates the smaller line width with a black background in the wing region, which testifies the reduced dislocation densities and enhanced crystalline quality of the epitaxial lateral overgrowth areas. Raman scattering spectra of the E2 (high) peaks exhibit in-plane compressive stress for all the overgrowth samples, and the E2 (high) peaks of samples grown on etched substrates shift toward the lower frequency range, indicating the relaxations of in-plane stress in these GaN films. Furthermore, room temperature photoluminescence measurement demonstrates a significant decrease in the yellow-band emission intensity of a-plane GaN grown on etched templates, which also illustrates the better optical properties of these samples. 相似文献
4.
5.
Comparative study of different properties of GaN films grown on(0001) sapphire using high and low temperature AlN interlayers 下载免费PDF全文
Comparative study of high and low temperature AlN
interlayers and their roles in the properties of GaN epilayers
prepared by means of metal organic chemical vapour deposition on
(0001) plane sapphire substrates is carried out by high resolution
x-ray diffraction, photoluminescence and Raman spectroscopy. It is
found that the crystalline quality of GaN epilayers is improved
significantly by using the high temperature AlN interlayers, which
prevent the threading dislocations from extending, especially for
the edge type dislocation. The analysis results based on
photoluminescence and Raman measurements demonstrate that there
exist more compressive stress in GaN epilayers with high temperature
AlN interlayers. The band edge emission energy increases from
3.423~eV to 3.438~eV and the frequency of Raman shift of $E_{2
}$(TO) moves from 571.3~cm$^{ - 1}$ to 572.9~cm$^{ - 1}$ when the
temperature of AlN interlayers increases from 700~$^{\circ}$C to
1050~$^{\circ}$C. It is believed that the temperature of AlN
interlayers effectively determines the size, the density and the
coalescence rate of the islands, and the high temperature AlN
interlayers provide large size and low density islands for GaN
epilayer growth and the threading dislocations are bent and
interactive easily. Due to the threading dislocation reduction in
GaN epilayers with high temperature AlN interlayers, the approaches
of strain relaxation reduce drastically, and thus the compressive
stress in GaN epilayers with high temperature AlN interlayers is
high compared with that in GaN epilayers with low temperature AlN
interlayers. 相似文献
6.
Improved crystal quality of GaN film with the in-plane lattice-matched Ino.17Alo.s3N interlayer grown on sapphire substrate using pulsed metal-organic chemical vapor deposition 下载免费PDF全文
We report on an improvement in the crystal quality of GaN film with an Ino.17Alo.83N interlayer grown by pulsed metal-organic chemical vapor deposition, which is in-plane lattice-matched to GaN films. The indium composition of about 17% and the reductions of both screw and edge threading dislocations (TDs) in GaN film with the InA1N interlayer are estimated by high resolution X-ray diffraction. Transmission electron microscopy (TEM) measurements are employed to understand the mechanism of reduction in TD density. Raman and photoluminescence measurements indicate that the InA1N interlayer can improve the crystal quality of GaN film, and verify that there is no additional residual stress induced into the GaN film with InA1N interlayer. Atomic force microscopy measurement shows that the InA1N interlayer brings in a smooth surface morphology of GaN film. All the results show that the insertion of the InA1N interlayer is a convenient method to achieve excellent crystal quality in GaN epitaxy. 相似文献
7.
Effect of Si doping in wells of A1GaN/GaN superlattice on the characteristics of epitaxial layer 下载免费PDF全文
An A1GaN/GaN superlattice grown on the top of a GaN buffer induces the broadening of the full width at half maximum of (102) and (002) X-ray diffraction rocking curves. With an increase in the Si-doped concentration in the GaN wells, the full width at half maximum of the (102) rocking curves decreases, while that of the (002) rocking curves increases. A significant increase of the full width at the half maximum of the (002) rocking curves when the doping concentration reaches 2.5 × 10^19 cm-3 indicates the substantial increase of the inclined threading dislocation. High level doping in the A1GaN/GaN superlattice can greatly reduce the biaxial stress and optimize the surface roughness of the structures grown on the top of it. 相似文献
8.
Improved crystal quality of GaN film with the in-plane lattice-matched In_(0.17)Al_(0.83)N interlayer grown on sapphire substrate using pulsed metal organic chemical vapor deposition 下载免费PDF全文
We report on an improvement in the crystal quality of GaN film with an In0.17Al0.83N interlayer grown by pulsed metal–organic chemical vapor deposition, which is in-plane lattice-matched to GaN films. The indium composition of about 17% and the reductions of both screw and edge threading dislocations(TDs) in GaN film with the InAlN interlayer are estimated by high resolution X-ray diffraction. Transmission electron microscopy(TEM) measurements are employed to understand the mechanism of reduction in TD density. Raman and photoluminescence measurements indicate that the InAlN interlayer can improve the crystal quality of GaN film, and verify that there is no additional residual stress induced into the GaN film with InAlN interlayer. Atomic force microscopy measurement shows that the InAlN interlayer brings in a smooth surface morphology of GaN film. All the results show that the insertion of the InAlN interlayer is a convenient method to achieve excellent crystal quality in GaN epitaxy. 相似文献
9.
文章研究了InAlN/GaN和引入AlN界面插入层形成的InAlN/AlN/GaN材料的输运性质. 样品均在蓝宝石上以脉冲金属有机物化学气相淀积法生长,霍尔迁移率变温特性具有典型的二维电子气(2DEG)特征. 综合各种散射机理包括声学形变势散射、压电散射、极性光学声子散射、位错散射、合金无序散射和界面粗糙度散射,理论分析了温度对迁移率的影响,发现室温下两种材料中2DEG支配性的散射机理都是极性光学波散射和界面粗糙度散射;AlN插入层对InAlN/GaN材料迁移率的改善作用一方面是免除2DEG的合金无序散射,另外还显著改善异质界面,抑制了界面粗糙度散射. 考虑到2DEG密度也是影响其迁移率的重要因素,结合实验数据给出了晶格匹配InAlN/GaN和InAlN/AlN/GaN材料的2DEG迁移率随电子密度变化的理论上限.
关键词:
InAlN/GaN
二维电子气
迁移率 相似文献
10.