Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

High-precision sub-pixel interpolation in particle image velocimetry image processing

The task of image interpolation and re-sampling for particle image velocimetry (PIV) is investigated, which is used for window shifting with sub-pixel accuracy and image or window deformation. A new interpolation scheme based on a Gaussian filter is introduced and compared with commonly used and widely accepted interpolation techniques in terms of the achievable root mean square deviation of the displacement estimates.     

Der Einfluß von Grenzflächenerscheinungen auf den Stoffübergang und die Prozeßführung in Gegenstromkolonnen mit überkritischem CO2

Zusammenfassung Mittels des Einsatzes einer Hochdrucksichtzelle wurden Eigenschaften der Kontaktbereiche in Trennverfahren mit unterschiedlichen wäßrigen Lösungen und CO₂ unter hohen Drücken untersucht. Die Methode des hängenden Tropfens wurde zur Messung der Grenzflächenspannung bis zu Drücken von 280 bar angewandt. Der mit dem Druck abnehmende Verlauf weist nach der Gibbs'schen Theorie auf die Anreicherung von CO₂ in der Phasengrenze. Weiterhin wurde die für Packungskolonnen bedeutsame Feststoffbenetzung in Abhängigkeit von Druck und Oberflächenbeschaffenheit des Feststoffes untersucht. Der die Feststoffbenetzung charakterisierende Kontaktwinkel wurde mittels der Methode der gekippten Platte vermessen und ergab eine schlechtere Benetzung bei höheren Drücken und glatten Stahloberflächen.

---

The effect of interfacial phenomena on mass transport and performance of separations in countercurrent columns with supercritical CO₂

Interfacial phenomena affecting countercurrent separation processes have been studied in systems containing aqueous solutions and CO₂ at elevated pressures by means of a high pressure optical cell. The pendant drop method was applied in order to measure the interfacial tension up to 280 bar. The decreasing course as a function of the pressure is due to the adsorption of CO₂ at the interface according to Gibbs' law. Further, wetting characteristics have been investigated as they are of considerable importance to packed columns. Therefore, the contact angle was determined by the method of the tilting plate and came out to increase with pressure and smoothness of the solid surface, indicating the loss of wettability.

---

     

CHROMOPHORE ROTATION IN 124-kD ALTON A vena sativa PHYTOCHROME AS MEASURED BY LIGHT-INDUCED CHANGES IN LINEAR DICHROISM

Abstract— From light-induced changes in linear dichroism, we have calculated the rotation of the long-wavelength-absorbing transition moment that occurs during phototransformation of 124-kilodalton Avena sativa phytochrome. Phytochrome was purified to homogeneity and immobilized onto Sepharose beads covalently coated with antibodies against A. sativa phytochrome. Changes in linear dichroism were induced by plane-polarized red or far-red light and measured by the absorbance differences at 660 and 730 nm using a dual-wavelength spectrophotometer equipped with polarizing filters in the measuring beams. From such measurements, we calculate a rotation angle of 31^o (or 149^o) during photoconversion of Pr to Pfr and 30^o (or 150^o) during photoconversion of Pfr to Pr. These values are similar to the value of 32^o (or 148^o) reported earlier for the rotation of the transition moment of "large" A. sativa phytochrome (∽ 120 kilodalton) isolated under conditions that did not preclude post homogenization proteolysis of the 124 kilodalton molecule.     

Synthesis of some 4-substituted-2-(o-halogenophenyl)-1,2,3-triazoles

Mesoaldehyde 1,3-dioxime was treated with either 2,4,6-trichlorophenyl- (a), o-fluorophenyl- (b), or o-bromophenyl- (c) hydrazine to give the corresponding mesoaldehyde 1,3-dioxime-2-halogenophenylhydrazones (1a,b,c). The latter were O-acetylated with acetic anhydride, and cyclized to triazole 4-oximes (3b, c) or triazole 4-O-acetyloximes ( 6a,b,c ) with cesium carbonate, then converted to nitriles ( 7a,b,c ) by refluxing with acetic anhydride followed by pyrolysis, or to aldehydes ( 4a,b,c ) by hydrolysis. The nitriles ( 7a,b,c ) were also converted to acids ( 9a,b,c ), esters ( 10a,b,c ), amides ( 8a,c ), an alcohol (11a), and an amine ( 12a ). In addition, tetrazoles of two types were prepared. The first ( 13d,e ) were obtained from the acid chlorides by the action of 5-aminotetrazole, whereas the second ( 14f ) was produced from the respective nitrile by the action of ammonium azide.     

Evidence for N2N3N45 super coster kronig processes in metallic Nb,Mo, Ru and Rh

The 4p photoelectron spectra of metallic Nb, Mo, Ru and Rh have been recorded. By use of a deconvolution procedure it is shown that the 4p_{$\text{1}\text{2}$} spin-orbit component has a linewidth which significantly exceeds that of the 4p_{$\text{3}\text{2}$} component. This suggests that N₂N₃N₄₅ super Coster Kronig processes give a considerable contribution to the decay rata of the 4p_{$\text{1}\text{2}$} hole state.