基于LQG控制的整车8-DOF系统振动分析

建立了整车8-DOF系统动力学模型,考虑了主动悬架控制,并增设了主动座椅控制,设计了车辆主动悬架系统的LQG控制器。基于Matlab仿真平台建立了整车8-DOF系统动力学仿真模型,对所得最优控制策略下的动态响应进行了仿真验证。仿真结果表明:为了改善人椅系统质心及车身质心的跳振性能需要在一定程度上弱化各轮轮胎动位移性能。从控制效能上来看,该最优控制器能够满足各行驶状态下对悬架性能的要求,改善了车辆的行驶平顺性。     

Fluid‐structure coupling of linear elastic model with compressible flow models

Cavitation erosion is caused in solids exposed to strong pressure waves developing in an adjacent fluid field. The knowledge of the transient distribution of stresses in the solid is important to understand the cause of damaging by comparisons with breaking points of the material. The modeling of this problem requires the coupling of the models for the fluid and the solid. For this purpose, we use a strategy based on the solution of coupled Riemann problems that has been originally developed for the coupling of 2 fluids. This concept is exemplified for the coupling of a linear elastic structure with an ideal gas. The coupling procedure relies on the solution of a nonlinear equation. Existence and uniqueness of the solution is proven. The coupling conditions are validated by means of quasi‐1D problems for which an explicit solution can be determined. For a more realistic scenario, a 2D application is considered where in a compressible single fluid, a hot gas bubble at low pressure collapses in a cold gas at high pressure near an adjacent structure.     

An approach of dynamic mesh adaptation for simulating 3‐dimensional unsteady moving‐immersed‐boundary flows

In this paper, we present an approach of dynamic mesh adaptation for simulating complex 3‐dimensional incompressible moving‐boundary flows by immersed boundary methods. Tetrahedral meshes are adapted by a hierarchical refining/coarsening algorithm. Regular refinement is accomplished by dividing 1 tetrahedron into 8 subcells, and irregular refinement is only for eliminating the hanging points. Merging the 8 subcells obtained by regular refinement, the mesh is coarsened. With hierarchical refining/coarsening, mesh adaptivity can be achieved by adjusting the mesh only 1 time for each adaptation period. The level difference between 2 neighboring cells never exceeds 1, and the geometrical quality of mesh does not degrade as the level of adaptive mesh increases. A predictor‐corrector scheme is introduced to eliminate the phase lag between adapted mesh and unsteady solution. The error caused by each solution transferring from the old mesh to the new adapted one is small because most of the nodes on the 2 meshes are coincident. An immersed boundary method named local domain‐free discretization is employed to solve the flow equations. Several numerical experiments have been conducted for 3‐dimensional incompressible moving‐boundary flows. By using the present approach, the number of mesh nodes is reduced greatly while the accuracy of solution can be preserved.     

疏松砂岩油藏大孔道定性识别新方法研究

疏松砂岩油藏在长期注水开发过程中,往往伴随着大孔道的出现,这严重影响了油藏水驱开发效果,制约了采出程度的进一步提高,因此,大孔道识别及有效封堵成为该类油藏急需解决的关键问题.通过研究分析,确定了影响大孔道从形成到发展的7种主要静态因素,以及标志大孔道形成的6种主要动态因素.将层次分析法及灰色关联法相结合,分别计算静态及动态因素的权重,建立了全新的大孔道定性识别模型.示踪剂监测结果验证了该方法的实用性和有效性.     

基于一维数据逐段均匀条件下的参考分布研究

聚类分析中一个重要的问题是估计聚类数,GS方法通过参考分布对聚类数进行合理的估计,解决了其他聚类方法无法对应分为一类的数据进行分类的问题,具有更好的分类效果;目前已通过理论证明得出,在分布为对数凹且一维情况下,GS方法的参考分布为均匀分布,而有关其在其他条件下的参考分布研究较少;针对这一情况,提出解决一维且逐段均匀条件下GS方法的参考分布问题,以类内平方和为评价标准,通过拉格朗日乘数法求解与问题等价的优化问题,理论证出条件下总体均匀分布是类内平方和最大的情况,进而得出对于一维数据,逐段均匀条件下的参考分布仍为均匀分布的结论。     

Theoretical Design of Biodegradable Phthalic Acid Ester Derivatives in Marine and Freshwater Environments

The biodegradability of phtalic acid esters in marine and freshwater environments was characterized by their binding free energy with corresponding degrading enzymes. According to comprehensive biodegradation effects weights, the binding free energy values were converted into dimensionless efficacy coefficient using ratio normalization method. Then, considering comprehensive dual biodegradation effects value and the structural parameters of PAEs in both marine and freshwater environments, a 3D-QSAR pharmacophore model was constructed, five PAE derivatives (DBP−COOH, DBP−CHO, DBP−OH, DINP−NH₂, and DINP−NO₂) were screened out based on their environmental friendliness, functionality and stability. The prediction of biodegradation effects on five PAE derivatives by biodegradation models in marine and freshwater environment increased by 15.90 %, 15.84 %, 27.21 %, 12.33 %, and 8.32 %, and 21.57 %, 15.21 %, 20.99 %, 15.10 %, and 9.74 %, respectively. By simulating the photodegradation path of the PAE derivative molecular, it was found that DBP−OH can generate ^.OH and provides free radicals for the photodegradation of microplastics in the environment.     

基于突变级数法的福州市某区土壤重金属污染综合评价

以福州市某区土壤为研究对象,采用突变级数法对福州市某区土壤重金属污染进行评价,依据主成分分析对评价因子进行选择,整个评价指标体系避免了人为确定权重的主观性.结果表明:福州市某区土壤重金属污染目前整体呈现一个较为良好的态势,但有部分地区处于"病态"状况.距离该区中心较近的西客站、李园天桥、远洋以及于山、东街口到靠近郊区的燎原、三角埕、鼓山等地的污染的综合隶属值呈递增的趋势,表明距离城市中心越近的土壤重金属污染越为严重.     

重卡驱动桥壳疲劳稳健性与轻量化设计

驱动桥壳轻量化设计对于提高承载能力、降低生产成本具有重要的意义.本文在驱动桥壳有限元分析和疲劳分析计算的基础上建立驱动桥壳多目标优化模型，对重型卡车驱动桥壳进行参数化设计，建立正交试验表，利用田口方法和综合评价方法对驱动桥壳的疲劳性能稳健性和质量进行优化设计.优化结果表明，此方法可以应用于驱动桥壳的多目标优化，优化后驱动桥壳的疲劳稳健性能得到提高，减轻了质量，因此节约了桥壳材料，降低了生产和运营成本，提高了设计水平.     

A simple three‐wave approximate Riemann solver for the Saint‐Venant‐Exner equations

Erosion and sediments transport processes have a great impact on industrial structures and on water quality. Despite its limitations, the Saint‐Venant‐Exner system is still (and for sure for some years) widely used in industrial codes to model the bedload sediment transport. In practice, its numerical resolution is mostly handled by a splitting technique that allows a weak coupling between hydraulic and morphodynamic distinct softwares but may suffer from important stability issues. In recent works, many authors proposed alternative methods based on a strong coupling that cure this problem but are not so trivial to implement in an industrial context. In this work, we then pursue 2 objectives. First, we propose a very simple scheme based on an approximate Riemann solver, respecting the strong coupling framework, and we demonstrate its stability and accuracy through a number of numerical test cases. However, second, we reinterpret our scheme as a splitting technique and we extend the purpose to propose what should be the minimal coupling that ensures the stability of the global numerical process in industrial codes, at least, when dealing with collocated finite volume method. The resulting splitting method is, up to our knowledge, the only one for which stability properties are fully demonstrated.