Calculations of two dimensional electron gas distributions in AlGaN/GaN material system

This paper presents calculating results of the two-dimensional electron gas (2DEG) distributions in AlGaN/GaN material system by solving the Schr\"{o}dinger and Poisson equations self-consistently. Due to high 2DEG density in the AlGaN/GaN heterojunction interface, the exchange correlation potential should be considered among the potential energy item of Schr\"{o}dinger equation. Analysis of the exchange correlation potential is given. The dependencies of the conduction band edge, 2DEG density on the Al mole fraction are presented. The polarization fields have strong influence on 2DEG density in the AlGaN/GaN heterojunction, so the dependency of the conduction band edge on the polarization is also given.     

TiAl3 和Ti/TiAl3 非合金化电极n型GaN欧姆接触的实现

在不进行合金化的情况下,首次直接采用TiAl3合金材料作为金属接触电极.在蓝宝石衬底上生长的n型载流子浓度为2×1018 cm-3的GaN上,成功地得到低接触电阻的欧姆接触,并由环形传输线模型方法测得比接触电阻率为3×10-5 Ω*cm2.与通常n型欧姆接触采用的Ti/Al双层结构比较,TiAl3合金结构更容易形成非合金化的n型欧姆接触.在此实验基础上,进一步分析了N空位和界面层处的TiAl3在形成非合金化或低温退火欧姆接触中发挥的作用,由此设计的Ti/TiAl3/Ni/Au接触结构,在TiAl3合金结构基础上明显地降低了接触电阻率.     

Improvement of breakdown characteristics of an A1GaN/GaN HEMT with a U-type gate foot for millimeter-wave power application

<正>In this study,the physics-based device simulation tool Silvaco ATLAS is used to characterize the electrical properties of an AlGaN/GaN high electron mobility transistor(HEMT) with a U-type gate foot.The U-gate AlGaN/GaN HEMT mainly features a gradually changed sidewall angle,which effectively mitigates the electric field in the channel, thus obtaining enhanced off-state breakdown characteristics.At the same time,only a small additional gate capacitance and decreased gate resistance ensure excellent RF characteristics for the U-gate device.U-gate AlGaN/GaN HEMTs are feasible through adjusting the etching conditions of an inductively coupled plasma system,without introducing any extra process steps.The simulation results are confirmed by experimental measurements.These features indicate that U-gate AlGaN/GaN HEMTs might be promising candidates for use in miltimeter-wave power applications.     

First-order Raman scattering in cylindrical wurtzite nanowire

We have presented a theoretical study on electron resonant Raman scattering (ERRS) process associated with the bulk longitudinal optical (LO), surface optical (SO) and quasi-confined (QC) phonon modes in a free-standing wurtzite nanowire (NW). We consider the Fröhlich electron–phonon interaction in the framework of the dielectric continuum model. Numerical calculations on the GaN material reveal that differential cross-section (DCS) is sensitive to the wire size. The bulk LO and high-frequency quasi-confined (QC₊) phonons make main contributions to the DCS and the impact of the SO phonon can be negligible in the ERRS process. Moreover, scattering intensity of the bulk LO phonon is strongly enhanced as the incident photon energy approaches the energy band-gap of the GaN.     

Small-signal modeling of GaN HEMT switch with a new intrinsic elements extraction method

A novel and accurate method is proposed to extract the intrinsic elements of the GaN high-electron-mobility transistor(HEMT) switch.The new extraction method is verified by comparing the simulated S-parameters with the measured data over the 5-40 GHz frequency range.The percentage errors E_(ij) within 3.83% show the great agreement between the simulated S-parameters and the measured data.     

Comparison between blue lasers and light‐emitting diodes for future solid‐state lighting

Solid‐state lighting (SSL) is now the most efficient source of high color quality white light ever created. Nevertheless, the blue InGaN light‐emitting diodes (LEDs) that are the light engine of SSL still have significant performance limitations. Foremost among these is the decrease in efficiency at high input current densities widely known as “efficiency droop.” Efficiency droop limits input power densities, contrary to the desire to produce more photons per unit LED chip area and to make SSL more affordable. Pending a solution to efficiency droop, an alternative device could be a blue laser diode (LD). LDs, operated in stimulated emission, can have high efficiencies at much higher input power densities than LEDs can. In this article, LEDs and LDs for future SSL are explored by comparing: their current state‐of‐the‐art input‐power‐density‐dependent power‐conversion efficiencies; potential improvements both in their peak power‐conversion efficiencies and in the input power densities at which those efficiencies peak; and their economics for practical SSL.     

Effect of the thickness of InGaN interlayer on a-plane GaN epilayer

In this paper,we use the a-plane InGaN interlayer to improve the property of a-plane GaN.Based on the a-InGaN interlayer,a template exhibits that a regular,porous structure,which acts as a compliant effect,can be obtained to release the strain caused by the lattice and thermal mismatch between a-GaN and r-sapphire.We find that the thickness of InGaN has a great influence on the growth of a-GaN.The surface morphology and crystalline quality both are first improved and then deteriorated with increasing the thickness of the InGaN interlayer.When the InGaN thickness exceeds a critical point,the a-GaN epilayer peels off in the process of cooling down to room temperature.This is an attractive way of lifting off a-GaN films from the sapphire substrate.     

High-quality InAlN/GaN heterostructures grown by metal–organic vapor phase epitaxy

We fabricated high-quality InAlN/GaN heterostructures by metal–organic vapor phase epitaxy (MOVPE). X-ray diffraction measurements revealed that InAlN/GaN heterostructures grown under optimal conditions have flat surfaces and abrupt heterointerfaces. Electron mobility from 1200 to 2000 cm²/V s was obtained at room temperature. To our knowledge, this mobility is the highest ever reported for InAlN/GaN heterostructures. We also investigated the relationship between the Al composition and sheet electron density (N_s) for the first time. N_s increased from 1.0×10¹² to 2.7×10¹³ cm⁻² when the Al composition increased from 0.78 to 0.89.     

InGaN/GaN多量子阱蓝色发光二极管的实验与模拟分析

分别采用量子阱模型和量子点模型对蓝色InGaN/GaN多量子阱发光二极管电学和光学特性进行模拟,并和实验测量结果进行了比对,结果发现,量子点模型的引入,很好地解决了I-V和电致发光二方面的实验与理论模型间符合程度不好的问题.同时,在I-V曲线特性模拟中发现,在量子点理论模型的基础上,只有考虑到载流子的非平衡量子传输效应,才能得到和实验相接近的I-V曲线,揭示着在InGaN/GaN 多量子阱发光二极管电输运特性中,载流子的非 关键词： InGaN/GaN 发光二极管 数值模拟 量子点模型