Design of a new compact THz source based on Smith-Purcell radiation

In recent years, people are dedicated to the research work of finding compact THz sources with high emission power. Smith-Purcell radiation is qualified for the possibility of coherent enhancement due to the effect of FEL mechanism. The compact experiment device is expected to produce hundreds mW level THz ray. The electron beam with good quality is provided under the optimized design of the electron gun. Besides, the grating is designed as an oscillator without any external feedbacks. While the beam passes through the grating surface, the beam bunching will be strong and the second harmonics enhancement will be evident, as is seen from the simulation results.     

2维全自动亥姆霍兹线圈磁块测量方法

在波荡器和扭摆器的研制过程中,为提高磁块的测量效率和精度,提出了2维全自动亥姆霍兹线圈磁块测量方法。通过理论推导得到仅采用2维全自动旋转而不需要3维旋转就可以实现磁块的全自动测量,降低了磁块全自动测量的实现难度。根据该方法的理论,已成功研制出一台2维全自动亥姆霍兹线圈测量装备,并在上海光源的磁块测量中使用。系统地给出2维全自动亥姆霍兹线圈磁块的测量理论和方法,并对测量误差进行了分析,该系统实现了磁块剩磁测量的高效率、高精度和高重复性,可以在30 s内完成单磁块的测量,重复性和精度均好于510-4。     

Optimal Halbach permanent magnet designs for maximally pulling and pushing nanoparticles

Optimization methods are presented to design Halbach arrays to maximize the forces applied on magnetic nanoparticles at deep tissue locations. In magnetic drug targeting, where magnets are used to focus therapeutic nanoparticles to disease locations, the sharp fall off of magnetic fields and forces with distances from magnets has limited the depth of targeting. Creating stronger forces at a depth by optimally designed Halbach arrays would allow treatment of a wider class of patients, e.g. patients with deeper tumors. The presented optimization methods are based on semi-definite quadratic programming, yield provably globally optimal Halbach designs in 2 and 3-dimensions, for maximal pull or push magnetic forces (stronger pull forces can collect nanoparticles against blood forces in deeper vessels; push forces can be used to inject particles into precise locations, e.g. into the inner ear). These Halbach designs, here tested in simulations of Maxwell's equations, significantly outperform benchmark magnets of the same size and strength. For example, a 3-dimensional 36 element 2000 cm³ volume optimal Halbach design yields a 5× greater force at a 10 cm depth compared to a uniformly magnetized magnet of the same size and strength. The designed arrays should be feasible to construct, as they have a similar strength (≤1 T), size (≤2000 cm³), and number of elements (≤36) as previously demonstrated arrays, and retain good performance for reasonable manufacturing errors (element magnetization direction errors ≤5°), thus yielding practical designs to improve magnetic drug targeting treatment depths.     

The magnet design for the HLS storage ring upgrade project

In order to improve the performance of the Hefei Light Source (HLS), in particular to get higher brilliance synchrotron radiation and increase the number of straight section insertion devices, an upgrade project called HLSII will be launched soon. The storage ring lattice, which has a double bend achromatic structure with four periods, comprises eight dipoles, 32 quadrupoles and 32 combined function sextupoles. The design and analysis of the magnets are shown in this paper, along with the optimization of the multipurpose combined function magnet, which consists of three magnets: skew quadrupole, horizontal dipole and vertical dipole, with the main sextupole magnet. This type of magnet is the first one that has been designed and used in China. The mechanical design and fabrication procedures for the magnets are also presented.     

低温/高温复合超导磁体的研究进展

低温/高温复合超导体的研究是当前超导领域比较新的一个课题,文章介绍了低温/高温复合超导体的结构以及加工工艺,并结合相关数值模拟和实验结果对复合超导体电流分布、热传导性质、理论机理和稳定性研究等相关问题进行了讨论与探索。     

Adaptive synchronization of chaos in permanent magnet synchronous motors based on passivity theory

An adaptive synchronization control method is proposed for chaotic permanent magnet synchronous motors based on the property of a passive system.We prove that the controller makes the synchronization error system between the driving and the response systems not only passive but also asymptotically stable.The simulation results show that the proposed method is effective and robust against uncertainties in the systemic parameters.     

CFETR CSMC装配误差下的电磁状态研究

中心螺旋管模型线圈是为了积累中心螺线管线圈设计和制造经验而预研的一套混合超导磁体线圈,该线圈由五大模块组成,高场区采用Nb_3Sn线圈,低场区采用NbTi线圈,可以满足紧凑型聚变装置对低纵横比的要求.然而模型线圈各模块结构复杂、尺寸庞大在装配过程中不可避免的存在装配误差,线圈励磁以后产生的非对称磁场和电磁力将分别影响等离子体的旋转和线圈整体的稳定性.为了详细分析装配误差对线圈磁场和电磁力的影响,选取模型线圈在装配过程中可能出现的典型的装配误差,基于电流丝等效模型计算了NbTi线圈偏置以后Nb_3Sn内外线圈上的磁场和电磁力.计算结果表明,由于装配误差,线圈磁场沿环向呈不均匀分布,轴向电磁力合力不为零;轴向和径向装配误差对线圈磁场和电磁力的影响存在明显的差异;电磁力随着装配误差呈线性增长,当线圈装配误差较大时将引发数倍于线圈自重的电磁力;该研究结果可为偏置状态下模型线圈的耦合场分析和线圈模块的装配方案设计优化提供参考.     

A new manganese-based single-molecule magnet with a record-high antiferromagnetic phase transition temperature

We perform both dc and ac magnetic measurements on the single crystal of Mn30（Et-sao）3（C104）（MeOH）3 single- molecule magnet （SMM） when the sample is preserved in air for different durations. We find that, during the oxidation process, the sample develops into another SMM with a smaller anisotropy energy barrier and a stronger antiferromagnetic intermolecular exchange interaction. The antiferromagnetic transition temperature observed at 6.65 K in the new SMM is record-high for the antiferromagnetic phase transition in all the known SMMs. Compared to the original SMM, the only apparent change for the new SMM is that each molecule has lost three methyl groups as revealed by four-circle x-ray diffraction （XRD）, which is thought to be the origin of the stronger antiferromagnetic intermolecular exchange interaction.     

Field measurement for superconducting magnets of ADS injector Ⅰ

A superconducting magnet prototype for Accelerator Driven Sub-critical System Injection-Ⅰ had been designed and fabricated, and tested in a new made vertical Dewar in November 2012. Batch magnet production was processed after some major revision from the magnet prototype, they include: removing off the perm-alloy shield, extending the iron yoke, using thin superconducting wire, etc. The first one of the batch magnets was tested in the vertical Dewar at the Harbin Institute of Technologyin in September 2013. A field measurement was carried out at the same time by the measurement platform that was seated on the top of the vertical Dewar,the measurement results met the design requirements. This paper will present the field measurement system design, measurement results and discussion on the residual field from the persistent current effect.     

Analysis and experimental concepts of the vibrating wire alignment technique

The vibrating wire alignment technique is a method which, by measuring the spatial distribution of a magnetic field, can achieve very high alignment accuracy. The vibrating wire alignment technique can be applied to fiducializing magnets and the alignment of accelerator straight section components, and it is a necessary supplement to conventional alignment methods. This article gives a systematic summary of the vibrating wire alignment technique, including vibrating wire model analysis, system frequency calculation, wire sag calculation, and the relation between wire amplitude and magnetic induction intensity. On the basis of this analysis, this article outlines two existing alignment methods, one based on magnetic field measurement and the other on amplitude and phase measurements. Finally, some basic experimental issues are discussed.