Computer Simulation of a 3-D Sensing System with Structured Illumination

A computer simulation system of three-dimensional sensing with structured illumination is presented. It includes the generation of deformed fringe patterns from 3-D shapes and the reconstruction of 3-D shapes, conversely. Some experimental results of the deformed fringe pattern and the reconstructed object shapes are presented. We have also discussed the effect of some major system parameters on the measurement results and considered how to correct these parameters according to the measurement result of the standard plane. Using this simulation system, the major system parameters: environmental conditions, measurement accuracy and algorithm evaluation of the 3-D shape measurement system based on PMP, FTP, SPM, etc., can be researched. © 1997 Elsevier Science Ltd. All rights reserved.     

利用迈克耳孙干涉仪重建蜡烛火焰温度场

利用教学实验中的迈克耳孙干涉仪,进行蜡烛火焰温度场的测量.对干涉条纹进行了处理和细化,并分别用阿贝尔变换法和环带法对蜡烛火焰的温度场进行了计算,得到蜡烛火焰横截面上温度场的定量结果.     

气溶胶前向散射大气能见度测量系统传递系数的标定及校准方法

分析了气溶胶的前向角散射特性,利用标准的大气透射仪标定前向散射大气能见度测量系统的传递系数。当系统结构发生变化时,传递系数也随之改变,为保证系统测量的准确性和简化系统传递系数的标定过程,提出了一种利用标准漫透射板校准系统传递系数的方法。该方法使用了两块具有相同透射系数的漫透射板,使气溶胶粒子团在前向半球上产生漫散射,此时探测器的测量值即为包含了仪器常数的定值。当系统结构改变时,这个测量值相对于原测量值的变化率作为比例系数代入系统传递系数的计算,实现校准。     

Research on identifying the order of fringe pattern traces using angular scan and zone search method

A method for automatically identifying the order of fringe pattern traces is presented. It uses the simplified Otsu algorithm for obtaining the threshold, the angular scan in the range of 45~ for searching the trace positions, and the zone search technique for identifying different traces. Experimental results show that the proposed method may reliably obtain the order of fringe pattern traces orientating from almost 45° to 90°.     

脉冲压缩光栅光路调节新方法研究

介绍了一种简单而实用的大口径脉冲压缩光栅光路调节方法,有效解决了普通光路调节方法中轴向调节精度不高的问题。首先由全息透镜(光栅)成像公式出发,推导出了该光路调节的基本原理。并从光栅记录系统与光栅衍射波像差的关系,结合初级像差理论推导得出叠栅条纹像差为0.4786λ,大约是光栅衍射波像差(0.25λ)的两倍,利用此关系也可对光栅衍射波像差进行实时监测。从数值模拟结果可知,利用叠栅条纹法调节光路可将光栅波像差减至0.06λ,相应的轴向误差量为0.007 mm,可有效提高了轴向调节精度。     

不同记录光强下辅助紫光对菌紫质薄膜全息衍射效率的影响

具有光致变色效应的菌紫质薄膜可用作可擦重写型全息记录介质. 在全息记录过程中,由于菌紫质薄膜对记录光的散射和反射引起记录光栅对比度下降,当记录光较弱时,这种影响较小,可以忽略;但当记录光较强时,散射和反射光对记录光栅的影响很大,必须考虑它们对光栅对比度的影响才能对实验结果进行合理的解释. 实验发现在不同的记录光强下辅助紫光对衍射效率动力学曲线的影响不同,当记录光强较弱时,加入辅助紫光可以提高衍射效率的稳定值、抑制峰值;而当记录光强较强时,加入辅助紫光除了提高衍射效率的稳定值外,还可以提高衍射效率的峰值. 关键词： 菌紫质 衍射效率 干涉条纹对比度     

A new method of non-contact gauge block calibration using a fringe-counting technique: I. Theoretical basis

A new non-contact interference method for gauge block or length bar calibration is presented. A central interference fringe of polychromatic light is used for the determination of the end surface position of the measured artefact. Distances referring to these positions are measured using a fringe-counting technique, with a wavelength-stabilized laser interferometer. Absolute and comparative measurement methods are proposed. A new technique for central interference fringe detection and identification is discussed.     

Modification to the Fringe Component of Diffraction Coefficient in TD-EEC Method

A modified formulation for fringe component of diffraction coefficient is implemented to TD-EEC method. An example of diffraction by perfectly conducting plate is used to illustrate our scheme. Comparing with the FDTD results we observe that the improved expression for fringe component is more accurate than that of Michaeli's formulation. This high frequency time domain technique is available for treating the bistatic scattering problems for millimeter waves.     

基于交比不变性的投影仪标定

提出了一种新的投影仪标定方法以提高数字光栅投影三维测量中投影仪标定的准确性.该方法结合二次投影技术和交比不变性进行投影仪标定.采用二次投影技术解决投射图案与标定板图案互相干扰的问题;采用交比不变性以避免引入相机的标定误差.接着进行了对比实验,以验证所提方法的有效性.选取需要相机参数的传统投影仪标定方法以及根据全局单应性...     

基于机器视觉的干涉条纹检测

基于机器视觉系统OpenMV,以迈克耳孙干涉仪干涉条纹为研究识别对象,根据光源相干性及干涉条纹动态特性,提出基于灰度采样统计的干涉条纹识别检测算法(干涉条纹同心形态搜索算法),运用MicroPython或Python语言编制实时检测程序,运行结果表明仿真和真实干涉条纹都得到了可靠的检测,精度为0.5个条纹,并且测量不确...