连续调节反衬度观察位相物体的新方法

在4F系统中,利用光栅可以完成位相振幅转换,能够实现连续调节反衬度,因而观察位相物体的各部分就更清楚。一、引言观察透明的位相物体,必需把位相的信息转换     

Seya-Namioka单色仪中全息光栅设计

本文着重讨论如何应用光程函数理论来确定IV型光栅的记录参数和工作参数,并给出设计实例。     

TheB 2Σ-X 2Σ system of the CaF molecule

The spectrum of theB ²Σ-X ²Σ system of the CaF molecule has been photographed in the second order of a 10.6 m concave grating spectrograph with 0.33 Å/mm dispersion. The rotational structure of the (0, 0) and (1, 0) bands has been analysed and the precise molecular constants have been obtained. Using the constants so determined the band origins of a large number of bands with 0 <v′,v″ < 10 have been calculated and used to obtain the accurate vibrational constants forB andX states and these are presented.     

多缝衍射光谱技术

本文从重叠干涉强度分布和重叠光谱强度分布的概念出发,论证和推导了多缝衍射光谱技术中复原光谱的极限理论分辨率的公式。讨论了稳定求解的条件。并对多缝衍射光谱技术和经典的衍射光谱技术两者的光谱分辨本领作了比较,同时给出了几个计算机实验的结果。     

锁模脉冲波长连续可调谐光纤激光器

利用在腔内加入可调谐光纤光栅滤波器使“8”字形腔掺Yb3+光纤激光器在锁模状态下实现波长连续可调谐.实验中,在保证锁模状态稳定的情况下,通过调节可调谐光纤光栅滤波器,使激光器输出锁模脉冲的中心波长在1 047 nm～1 055 nm范围内连续调谐,重复频率稳定维持在4.9 MHz.在中心波长1 053 nm处,测得锁模脉冲输出平均功率为8.02 mW,光谱带宽1 nm,脉冲宽度为259.3 ps.这种“8”字形腔被动锁模光纤激光器在锁模状态下对波长连续可调谐,并可长时间稳定工作.     

Athermal silicon arrayed waveguide grating with polymer-filled slot structure

In this paper, an athermal silicon arrayed waveguide grating (AWG) with the assistance of a polymer-filled slot structure is proposed. Arrayed slot waveguides were used to replace arrayed silicon photonic wires (SPWs). By carefully controlling the temperature dependence of the effective index of the polymer-filled slot waveguides, the athermal silicon AWG is realized. Analysis shows that the center wavelength shift of the AWG can be down to 0.14 pm/°C.     

In-plane ESPI using an achromatic interferometer with low-coherence laser source

The use of an achromatic interferometer is explored as a means of doing in-plane ESPI measurements using a laser diode as the light source. This interferometer type, which uses a diffraction grating in place of the conventional beamsplitter, has two features that make it suitable for making ESPI measurements over extended areas, even when using a low-coherence laser diode source. First, the parallelogram optical geometry of the interferometer causes all rays passing through to have the same optical path lengths. Second, the interferometer is achromatic, whereby the piezo-actuated mirror that steps the illumination light does so by the same phase angle, independent of wavelength. This latter feature accommodates the spectral impurity of a laser diode source. A periodic variation of fringe visibility is observed in experiments, where narrow ranges of high visibility occur at regular spatial intervals. This behavior derives from the clustered discrete spectral character of laser diode light output. A method to “tune” the interferometer by slightly rotating the diffraction grating is described so as to achieve consistent high fringe visibility throughout the measured images.     

光纤激光共孔径光谱合成实现5 kW高效优质输出

采用多层介质膜衍射光栅实现多路高功率光纤激光共孔径光谱合成有望成为光纤激光同时实现高功率、高效率和高光束质量的最具发展潜力的技术途径。搭建了一套基于双光栅色散补偿设计的5 kW共孔径光谱合成系统。采用国产多层介质膜衍射光栅实现了5路kW级窄谱子束激光的高效优质共孔径光谱合成,最大输出功率达5.07 kW,光束质量因子(M2)小于3,合成效率达到91.2%。初步研究表明：多层介质膜衍射光栅在较高功率水平、较宽光谱范围内均能保持较高衍射效率,是实现高功率光纤激光高效率光谱合成的重要器件;参与合成的子束自身的光束质量水平和线宽是影响合成输出光束质量的重要因素,光谱合成系统的输出功率主要受限于窄谱子束的输出功率和合成路数,增加窄谱子束的功率或合成路数均可进一步提升系统的输出功率。     

Ronchi光栅光密度的一种测试方法

本文提出利用衍射光栅的反射特性,在自光图像处理系统中对光栅进行实时无损伤检验.这种方法灵敏度高、简便易行,有较高的实用价值.理论与实验结果一致.     

光束发散度对紫外写入光纤光栅的影响

用傅里叶衍射光学分析了准分子激光束发散度对于光纤光栅制备的影响，发现光束发散角使光纤光栅的布拉格波长发生改变，相位版后干涉场沿光纤轴向和径向不均匀，对制备30dB高反射率光纤光栅造成困难。实验结果与理论分析基本一致，相对于理想平行光束情况，会聚光束使得光纤光栅布拉格波长出现在短波一边，发射光束使得光纤光栅布拉格波长出现在长波一边。