Thermal stability of ZnO thin film prepared by RF-magnetron sputtering evaluated by thermal desorption spectroscopy

Thermal stability of sputter deposited ZnO thin films was evaluated by thermal desorption spectroscopy (TDS). Desorption of Zn was mainly observed from the films deposited at low O₂/Ar gas ratio and low RF power. In contrast, O₂ desorption was mainly observed from the films deposited at high O₂/Ar gas ratio and high RF power. The amount of desorbed O₂ from the film increased with increasing the O₂/Ar gas flow ratio and the RF power. Furthermore, the desorption temperature of O₂ increased with increasing the RF power during the deposition. Thermal stability of the ZnO films was controlled not only by the O₂/Ar gas flow ratio, but also applied RF power to the target.     

Interaction of bathocuproine with metals (Ca, Mg, Al, Ag, and Au) studied by density functional theory

Electronic structure of the interface between a bathocuproine (BCP) molecule and metal surface was studied by density functional theory. The bond energy of BCP with metal surface increased with decreasing work function of metals, that is, Au, Ag, Al, Mg, and Ca in this order. The charge transfer also increased with decreasing metal work function. It was analyzed that the Fermi level and the lowest unoccupied molecular orbital of BCP are composed of both BCP and metal orbital component, and electron transport properties across the BCP and metal is discussed based on these analyses.     

基于垂直结构的有机光发射晶体管制备与性能研究

制备了一种有机垂直光发射晶体管, 兼具有机发光二极管的发光和晶体管的开关调节两个功能.其结构为一个有机发光单元垂直堆叠在一个电容单元上,两单元通过一个共有的源电极连在一起.当电容单元被充电时,积累在源电极的电荷能有效地调节源极与有机层之间的载流子注入势垒,从而达到控制源漏输出电流的大小,最终控制发光单元发光的强度.实验结果表明,器件可提供02 mA的输出电流,其大小可驱动发光单元发光,工作电压（开启电压）为6 V.这种垂直集成方案,实现了器件多功能化,为有机发光二极管有源矩阵驱动的实际应用提供了一种新的解决方法. 关键词： 有机光发射晶体管 垂直 电容     

High temperature characteristics of bilayer epitaxial graphene field-effect transistors on SiC Substrate

In this paper,high temperature direct current(DC) performance of bilayer epitaxial graphene device on SiC substrate is studied in a temperature range from 25℃ to 200℃.At a gate voltage of-8 V(far from Dirac point),the drainsource current decreases obviously with increasing temperature,but it has little change at a gate bias of +8 V(near Dirac point).The competing interactions between scattering and thermal activation are responsible for the different reduction tendencies.Four different kinds of scatterings are taken into account to qualitatively analyze the carrier mobility under different temperatures.The devices exhibit almost unchanged DC performances after high temperature measurements at 200℃ for 5 hours in air ambience,demonstrating the high thermal stabilities of the bilayer epitaxial graphene devices.     

Electronic transport properties of silicon junctionless nanowire transistors fabricated by femtosecond laser direct writing

Silicon junctionless nanowire transistor(JNT) is fabricated by femtosecond laser direct writing on a heavily n-doped SOI substrate.The performances of the transistor,i.e.,current drive,threshold voltage,subthreshold swing(SS),and electron mobility are evaluated.The device shows good gate control ability and low-temperature instability in a temperature range from 10 K to 300 K.The drain currents increasing by steps with the gate voltage are clearly observed from 10 K to50 K,which is attributed to the electron transport through one-dimensional(1D) subbands formed in the nanowire.Besides,the device exhibits a better low-field electron mobility of 290 cm~2·V~(-1)·s~(-1),implying that the silicon nanowires fabricated by femtosecond laser have good electrical properties.This approach provides a potential application for nanoscale device patterning.     

Growth condition optimization and mobility enhancement through inserting AlAs monolayer in the InP-based In_xGa_(1-x)As/In_(0.52)Al_(0.48)As HEMT structures

The structure of In P-based In_xGa_(1-x) As/In0.52Al0.48 As pseudomorphic high electron mobility transistor(PHEMT)was optimized in detail.Effects of growth temperature,growth interruption time,Si δ-doping condition,channel thickness and In content,and inserted Al As monolayer(ML) on the two-dimensional electron gas(2DEG) performance were investigated carefully.It was found that the use of the inserted Al As monolayer has an enhancement effect on the mobility due to the reduction of interface roughness and the suppression of Si movement.With optimization of the growth parameters,the structures composed of a 10 nm thick In0.75Ga0.25 As channel layer and a 3 nm thick Al As/In0.52Al0.48 As superlattices spacer layer exhibited electron mobilities as high as 12500 cm~2·V-1·s~(-1)(300 K) and 53500 cm~2·V~(-1_·s~(-1)(77 K) and the corresponding sheet carrier concentrations(Ns) of 2.8×10~(12)cm~(-2)and 2.9×1012cm~(-2),respectively.To the best of the authors' knowledge,this is the highest reported room temperature mobility for In P-based HEMTs with a spacer of 3 nm to date.     

Technology demonstration of a novel poly-Si nanowire thin film transistor

A simple process flow method for the fabrication of poly-Si nanowire thin film transistors(NW-TFTs) without advanced lithographic tools is introduced in this paper.The cross section of the nanowire channel was manipulated to have a parallelogram shape by combining a two-step etching process and a spacer formation technique.The electrical and temperature characteristics of the developed NW-TFTs are measured in detail and compared with those of conventional planar TFTs(used as a control).The as-demonstrated NW-TFT exhibits a small subthreshold swing(191 mV/dec),a high ON/OFF ratio(8.5 × 10~7),alow threshold voltage(1.12 V),a decreased OFF-state current,and a low drain-induced-barrier lowering value(70.11 mV/V).The effective trap densities both at the interface and grain boundaries are also significantly reduced in the NW-TFT.The results show that all improvements of the NW-TFT originate from the enhanced gate controllability of the multi-gate over the channel.     

有机铁磁界面自旋极化接触构型效应

基于第一性原理,研究了三种不同的接触构型垂直吸附在镍表面的苯双硫分子的界面自旋极化.结果表明界面自旋极化强烈依赖于接触构型,接触构型的变化可使自旋极化由正值变为负值.通过分析投影态密度,发现界面处镍原子的3d轨道与硫原子的sp³杂化轨道发生了轨道杂化.模拟机械可控断裂结实验中的界面吸附构型,根据计算的界面自旋极化,利用Julliere模型得到磁电阻约为27%,与实验测量结果较为符合.     

高电子迁移率晶体管放大器高功率微波损伤机理

在TCAD半导体仿真环境中,建立了0.25 m栅长的AlGaAs/InGaAs高电子迁移率晶体管(HEMT)低噪声放大器与微波脉冲作用的仿真模型,基于器件内部的电场强度、电流密度和温度分布的变化,研究了1 GHz的微波从栅极和漏极注入的损伤机理。研究结果表明,从栅极注入约40.1 dBm的微波时,HEMT内部峰值温度随着时间的变化振荡上升,最终使得器件失效,栅下靠源侧电流通道和强电场的同时存在使得该位置最容易损伤;从漏极注入微波时,注入功率的高低会使器件内部出现不同的响应过程,注入功率存在一个临界值,高于该值,器件有可能在第一个周期内损伤,损伤位置均在漏极附近。在1 GHz的微波作用下,漏极注入比栅极注入更难损伤。     

双极结型晶体管的集电结反向雪崩击穿特性

通过气体放电产生更高浓度的低温等离子体要求具有纳秒上升沿和纳秒脉宽的高重频快脉冲,而目前被广泛使用的MOSFET和IGBT都无法满足这些参数要求,而双极结型晶体管(BJT）的集电极与发射极之间的雪崩击穿过程具有快导通、快恢复、高稳定性等优点,适合作为小型Marx发生器的自击穿开关。文中对用多种型号的BJT进行击穿特性比较测试实验,发现可以通过改变BJT的门极和发射极的并联电阻来调节其雪崩击穿电压,实现一定范围的工作电压。雪崩击穿恢复特性实验表明,当击穿电流衰减到低于维持电流时,BJT就会开始恢复绝缘而关断,通过改变电路中的参数以控制击穿电流的变化就可以控制BJT的雪崩击穿导通时间（即导通脉宽）。将这些结论应用到实际电路中,可获得上升沿5 ns、脉宽为10 ns、幅值2 kV、重复频率高达100 kHz的纳秒快脉冲,可用于激发高浓度低温等离子体。