新型平板热管换热器热回收效率特性实验研究

本文针对普通住宅房间设计了一台新型平板式热管换热器,该换热器结构紧凑、体积小巧。为研究该换热器的使用条件,本文开展了不同工质(R113、R141b以及这两种工质的混合物)对该热管换热器换热效率影响的实验研究。整个实验在夏季工况下进行,热管真空度为1×10~(-3)Pa,充液量(灌入热管换热器内的工质体积与热管换热器体积之比)为1/3。实验结果表明:该热管换热器热回收效率较高。在整个风量范围内,R141b作为工质的热管换热器换热效果最好,最高效率达到了58.2%。     

大视场光学遥感器焦平面板的研制

焦平面板作为承载TDICCD器件的部件,其强度、动静态刚度、热稳定性直接影响到遥感器的成像质量.针对目前光学遥感器大视场、宽覆盖的发展趋势,设计了一种新型的焦平面板.选用性能指标优良的高体份SiC/Al复合材料,既满足了结构设计指标的要求,同时又大大降低了产品重量.通过有限元模拟仿真分析和相关试验,验证了设计方案的可行...     

多层膜劳厄透镜对8keV X射线的聚焦性能模拟研究

基于多层膜技术的劳厄(Laue)透镜能实现硬X射线纳米级聚焦,在X射线微纳分析领域具有重要的应用前景.基于衍射动力学理论,分析了X射线在多层膜劳厄透镜中的传播,计算了不同结构的多层膜劳厄透镜对8 keVX射线的聚焦性能.结果表明,最外层厚度为5 nm的倾斜多层膜劳厄透镜可获得5.7 nm的聚焦光斑和26%的平均衍射效率...     

平面研磨加工中工件转速的理论分析

平面研磨加工中工件转速决定了磨具与工件间的相对运动速度分布,并进而影响磨具和工件的面形精度。在考虑了磨具上金刚石丸片的实际排列以及接触区压强的实际分布的前提下,运用力学和运动学的方法,模拟分析了在固着磨料平面研磨加工中镜盘所受的摩擦力矩。在此基础上,根据稳定加工时力矩平衡原理得出了包含转速的数学公式,并重点探讨了工件半径和偏心矩对工件转速的影响。结果表明,工件转速并不总是等于磨具转速,而是随着偏心矩的增大而逐渐增高,随着工件半径的变化发生起伏波动。     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

光学多普勒层析三维矢量测速方法研究

光学多普勒层析术(ODT)是一种高分辨、非侵入的生物医学成像手段,能同时得到组织的结构信息和组织内血管的流速信息.提出了一种新型的基于相位分辨技术的ODT三维矢量测速方法.在ODT系统样品臂的准直镜和聚焦透镜之间加入窄带相位片,形成三个不同的相位延迟,通过计算多普勒频移和不同相位延迟下的多普勒展宽,可得到毛细管内的三维矢量流场分布.对已知浓度的聚苯乙烯溶液进行了一系列不同角度和不同流速的实验,结果证明这种新型的ODT矢量测速方法可以较精确的实现三维矢量流速的测量.     

Initial-boundary value problems for a class of nonlinear thermoelastic plate equations

This paper studies initial-boundary value problems for a class of nonlinear thermoelastic plate equations. Under some certain initial data and boundary conditions, it obtains an existence and uniqueness theorem of global weak solutions of the nonlinear thermoelstic plate equations, by means of the Galerkin method. Moreover, it also proves the existence of strong and classical solutions.     

Stationary Flow Past a Semi-Infinite Flat Plate: Analytical and Numerical Evidence for a Symmetry-Breaking Solution

We consider the question of the existence of stationary solutions for the Navier Stokes equations describing the flow of a incompressible fluid past a semi-infinite flat plate at zero incidence angle. By using ideas from the theory of dynamical systems we analyze the vorticity equation for this problem and show that a symmetry-breaking term fits naturally into the downstream asymptotic expansion of a solution. Finally, in order to check that our asymptotic expressions can be completed to a symmetry-breaking solution of the Navier–Stokes equations we solve the problem numerically by using our asymptotic results to prescribe artificial boundary conditions for a sequence of truncated domains. The results of these numerical computations a clearly compatible with the existence of such a solution. Mathematics Subject Classification (2000). 76D05, 76D25, 76M10, 41A60, 35Q35 Supported in part by the Fonds National Suisse.     

Sonocatalytic injury of cancer cells attached on the surface of a nickel–titanium dioxide alloy plate

The present study demonstrates ultrasound-induced cell injury using a nickel–titanium dioxide (Ni–TiO₂) alloy plate as a sonocatalyst and a cell culture surface. Ultrasound irradiation of cell-free Ni–TiO₂ alloy plates with 1 MHz ultrasound at 0.5 W/cm² for 30 s led to an increased generation of hydroxyl (OH) radicals compared to nickel–titanium (Ni–Ti) control alloy plates with and without ultrasound irradiation. When human breast cancer cells (MCF-7 cells) cultured on the Ni–TiO₂ alloy plates were irradiated with 1 MHz ultrasound at 0.5 W/cm² for 30 s and then incubated for 48 h, cell density on the alloy plate was reduced to approximately 50% of the controls on the Ni–Ti alloy plates with and without ultrasound irradiation. These results indicate the injury of MCF-7 cells following sonocatalytic OH radical generation by Ni–TiO₂. Further experiments demonstrated cell shrinkage and chromatin condensation after ultrasound irradiation of MCF-7 cells attached on the Ni–TiO₂ alloy plates, indicating induction of apoptosis.     

四区域法消除偏振棱镜缺陷对波片相位延迟测量的影响

在起偏器-待测波片-检偏器系统基础卜提出一种四区域测量波片相位延迟量的方法.调整待测波片和检偏器的方位角,获得相应的四组光强值,通过线性运算得到待测波片的相位延迟量,完全消除了起偏器和检偏器不完全消光带来的误差.由于测量系统中不存在标准波片或其他相位调制元件,允许测量波长仅受偏振棱镜和探测器的限制,因此四区域法可适用于很大波长范围内的波片测量.以λ/4波片为例,理论分析了测量系统利用四区域测量法后的仪器误差为σφ≤士3.49065×10-3rad(约0.2°),精度比原算法提高约1个数量级.实验验证了四区域法能有效提高系统精度.