2-[2-羟基-3-叔丁基-5-(3-甲氧羰乙基)苯基]-5-氯-2H-苯并三唑的合成

以对羟基苯丙酸甲酯和对氯邻硝基苯胺为原料经过烷基化、重氮化、偶合、还原环化和酯化反应合成了2-[2-羟基-3-叔丁基-5-（3-甲氧羰乙基）苯基]-5-氯-2H-苯并三唑紫外线吸收剂,反应总收率为36.83％。用质谱（MS）和核磁共振（1H—NMR）谱图表征了产物的结构,测定了产物的透光率和紫外吸收,表明产物是-类性能优良的新型苯并三唑紫外线吸收剂。     

Dual-band isotropic metamaterial absorber based on near-field interaction in the Ku band

We numerically and experimentally investigate single-band and dual-band isotropic metamaterial absorbers (IMAs) based on metallic disks. By optimizing the diameter of the metallic disks and the thickness of the dielectric substrate, the single-band IMA is observed at 16.2 GHz with absorptivity of 97%. When adding one disk-pair to the structure, the dual-band IMA is obtained at 12.8 and 15.5 GHz due to the symmetry breaking. The physical mechanics is explained by near-field coupling effect and equivalent LC circuit model. The measurement results performed in the range 12–18 GHz show a good agreement with simulation and theoretical analysis. Our findings demonstrate a new approach to achieve dual-band and multi-band IMAs.     

Head-on collision of normal shock waves in dusty gases

The head-on collision of normal shock waves in dusty gases has been investigated numerically, using the modified random-choice method. The results concerning the various flow field properties as well as the waves configuration were compared with those of a pure gas case.     

爆电换能脉冲大电流输出研究

 基于爆电换能原理,使用掺铌的PZT 95/5陶瓷组装换能器件,在垂直工作模式下,对爆电电源LRC电路响应进行了理论分析,并开展了脉冲大电流输出实验研究。实验采用多组PZT 95/5铁电陶瓷并联,利用平面波发生器作为冲击加载手段,获得了峰值5 kA以上的脉冲大电流,初始电流上升速率可达10~20 GA/s。实验结果与理论设计符合较好。     

离心泵在启动阶段的水力特性研究

针对工作的离心泵,分析了其内部流体的流动情况,建立了在非稳定工况下操作的理论扬程公式,非稳态理论扬程包括旋转加速附加扬程和水流加速消耗扬程以及由于流动速度变化引起泵壳中的附加压力而产生的扬程。在离心泵的启动阶段,对其在不同阀门开度下的水力性能进行了试验研究。测量了瞬时转速、流量、扬程随时间的变化关系,并把试验结果进行修正。由于启动时一部分扬程用来提供流体加速,压力传感器测量不到,因此必须把试验扬程加以修正。将理论计算与修正的试验结果进行了比较分析,两者基本吻合。     

1+1/2对转涡轮低压动叶激波结构的研究

本文对1 1／2对转涡轮低压动叶中激波结构等进行了详细的数值模拟．通过对流道中静压和马赫数等参数的分析发现,当高压动叶外伸波扫过低压动叶流道时,低压动叶前缘吸力面处产生了一道脱体弧形激波,流道中吸力面上产生了一道正激波,在脱体激波和正激波之间,存在着较强的膨胀波,这种分布与跨音压气机叶栅中的波系结构相似．当高压动叶尾迹扫过低压动叶时,低压动叶吸力面的压力会产生明显的波动,出现一个随时间变化的低压区．     

轴流式水轮机三维非定常湍流计算及压力脉动预测

水轮机的稳定性研究是目前工程上大型水轮机组流动分析的重要课题,本文以某水电站的大型轴流转桨式水轮机原型为基础建立计算模型,完成了从蜗壳进口到尾水管出口整个流道的非定常湍流计算,预测了固定导叶进口、转轮后、尾水管进口等多个位置的压力脉动,并利用FFT变换进行分析得到了压力脉动的频率和幅值,探讨了水轮机全流道内压力脉动产生和传播的原理．     

Reynolds stress models applied to canonical shock-turbulence interaction

Shock waves in high-speed flows can drastically alter the nature of Reynolds stresses in a turbulent flow. We study the canonical interaction of homogeneous isotropic turbulence passing through a normal shock, where the shock wave generates significant anisotropy of Reynolds stresses. Existing Reynolds stress models are applied to this canonical problem to predict the amplification of the stream-wise and transverse normal Reynolds stresses across the shock wave. In particular, the efficacy of the different models for the rapid pressure–strain correlation is evaluated by comparing the results with available direct numerical simulation (DNS) data. The model predictions are found to be grossly inaccurate, especially at high-Mach numbers. We propose physics-based improvement to the Reynolds stress-transport equation in the form of shock-unsteadiness effect and enstrophy amplification for turbulent dissipation rate . The resulting model is found to capture the essential physics of Reynolds stress amplification, and match DNS data for a range of Mach numbers. Numerical error encountered at shock waves are also analysed and the model equations are cast in conservative form to obtain physically consistent results with successive grid refinement. Finally, the proposed model for canonical shock-turbulence interaction is generalised to multi-dimensional flows with shock of arbitrary orientation.     

Improved sound absorption performance of three-dimensional MPP space sound absorbers by filling with porous materials

Because microperforated panels (MPPs), which can be made from various materials, provide wide-band sound absorption, they are recognized as one of the next-generation absorption materials. Although MPPs are typically placed in front of rigid walls, MPP space sound absorbers without a backing structure, including three-dimensional cylindrical MPP space absorbers (CMSAs) and rectangular MPP space absorbers (RMSAs), are proposed to extend their design flexibility and easy-to-use properties. On the other hand, improving the absorption performance by filling the back cavity of typical MPP absorbers with porous materials has been shown theoretically, and three-dimensional MPP space absorbers should display similar improvements. Herein the effects of porous materials inserted into the cavities of CMSAs and RMSAs are experimentally investigated and a numerical prediction method using the two-dimensional boundary element method is proposed. Consequently, CMSAs and RMSAs with improved absorption performances are illustrated based on the experimental results, and the applicability of the proposed prediction method as a design tool is confirmed by comparing the experimental and numerical results.