锁模脉冲波长连续可调谐光纤激光器

利用在腔内加入可调谐光纤光栅滤波器使“8”字形腔掺Yb3+光纤激光器在锁模状态下实现波长连续可调谐.实验中,在保证锁模状态稳定的情况下,通过调节可调谐光纤光栅滤波器,使激光器输出锁模脉冲的中心波长在1 047 nm～1 055 nm范围内连续调谐,重复频率稳定维持在4.9 MHz.在中心波长1 053 nm处,测得锁模脉冲输出平均功率为8.02 mW,光谱带宽1 nm,脉冲宽度为259.3 ps.这种“8”字形腔被动锁模光纤激光器在锁模状态下对波长连续可调谐,并可长时间稳定工作.     

25倍中红外连续变焦光学系统设计

针对制冷型320pixel×240pixel凝视焦平面阵列探测器,设计了一个25倍中红外连续变焦光学系统。该系统由变焦系统和二次成像系统构成。变焦系统由两个子变焦系统串联而成,可以实现高变焦比;二次成像系统的作用是压缩物镜口径和实现冷光阑效率的要求。该中波红外连续变焦系统光学系统的工作波段位于3.7～4.8μm,可以实现12～300mm连续变焦,F数达到2.5,满足100%冷光阑效率的要求。该系统具有变焦比大、相对孔径大、变焦行程短和变焦轨迹平滑等优点。     

New progress on beam availability and reliability of PKU high intensity CW proton ECR ion source

The stability and reliability of an ion source and its beam availability are extremely significant for any accelerator,especially for those high current long term CW operation ones like ADS. Although the first high quality 306-hours continuous wave(CW) operating curve at 50 m A@35 ke V has been successfully obtained with a standard compact 2.45 GHz ECR ion source at Peking University(PKU), but the uncertainties that caused beam trips before are unacceptable during an accelerator real operation and should be eliminated. Meanwhile, no permission will be given when the beam power is upgraded from 50 m A@35 ke V to 50 m A@50 ke V. To improve the PKU CW proton source quality, several upgrades were done recently. After those improvements, a new long term CW proton beam experiment at 50 m A@50 ke V was carried out in June 2016. The total running time is 300.5 hours, including near 6 hours ion source preparation and 294 hours non-disturb continuous operation. Within the continuous 13 days operation, no beam-off happened, no spark was observed,no beam drop appeared, no interrupting action was needed, and only a few beam fluctuations caused by the air conditional failure occurred. Beam availability and reliability within the 294 hours is 100%. The root-mean-square(RMS) emittance of this 50 m A@50 ke V CW proton beam is about 0.186 π.mm.mrad. A careful inspection of the ion source was done after this long term operation and no obvious damage was found. The restart experimental results obtained after the ion source inspection prove the high repeatability of PKU PMECRIS. In addition, a 130-m A H+beam was obtained at 50 k V with duty factor of 10%(100 Hz/1 ms) with this source. Details will be presented in this paper.     

Elastic,vibrational, and thermodynamic properties of Sr_(10)(PO_4)_6F_2 and Ca_(10)(PO_4)_6F_2 from first principles

The electronic, elastic, vibrational, and thermodynamic properties of Sr_(10)(PO_4)_6F_2(Sr-FAP) and Ca_(10)(PO_4)_6F_2(CaFAP) are systematically investigated by the first-principles calculations. The calculated electronic band structure indicates that the Sr-FAP and Ca-FAP are insulator materials with the indirect band gap of 5.273 eV and 5.592 eV, respectively. The elastic constants are obtained by the "stress–strain" method, and elastic modulus are further evaluated and discussed. The vibrational properties, including the phonon dispersion curves, the phonon density of states, the Born effective charge, and associated longitudinal optical and transverse optical(LO–TO) splitting of optical modes, as well as the phonon frequencies at zone-center are obtained within the linear-response approach. Substitution of Ca by Sr causes phonon frequencies to shift to lower values as expected due to the mass effect. Additionally, some phonon-related thermodynamic properties, such as Helmholtz free energy F, internal energy E, entropy S, and specific heat C_V of Sr-FAP and Ca-FAP are predicted with the harmonic approximation. The present calculated results of two apatites are consistent with the reported experimental and theoretical results.     

Anonymous voting for multi-dimensional CV quantum system

We investigate the design of anonymous voting protocols,CV-based binary-valued ballot and CV-based multi-valued ballot with continuous variables(CV) in a multi-dimensional quantum cryptosystem to ensure the security of voting procedure and data privacy.The quantum entangled states are employed in the continuous variable quantum system to carry the voting information and assist information transmission,which takes the advantage of the GHZ-like states in terms of improving the utilization of quantum states by decreasing the number of required quantum states.It provides a potential approach to achieve the efficient quantum anonymous voting with high transmission security,especially in large-scale votes.     

Application of optical diffraction method in designing phase plates

Continuous phase plate(CPP),which has a function of beam shaping in laser systems,is one kind of important diffractive optics.Based on the Fourier transform of the Gerchberg-Saxton(G-S) algorithm for designing CPP,we proposed an optical diffraction method according to the real system conditions.A thin lens can complete the Fourier transform of the input signal and the inverse propagation of light can be implemented in a program.Using both of the two functions can realize the iteration process to calculate the near-field distribution of light and the far-field repeatedly,which is similar to the G-S algorithm.The results show that using the optical diffraction method can design a CPP for a complicated laser system,and make the CPP have abilities of beam shaping and phase compensation for the phase aberration of the system.The method can improve the adaptation of the phase plate in systems with phase aberrations.     

Unified a Priori Error Estimate and a Posteriori Error Estimate of CIP-FEM for Elliptic Equations

This paper is devoted to a unified a priori and a posteriori error analysis of CIP-FEM (continuous interior penalty finite element method) for second-order elliptic problems. Compared with the classic a priori error analysis in literature, our technique can easily apply for any type regularity assumption on the exact solution, especially for the case of lower $H^{1+s}$ weak regularity under consideration, where 0 ≤$s$≤ 1/2. Because of the penalty term used in the CIP-FEM, Galerkin orthogonality is lost and Céa Lemma for conforming finite element methods can not be applied immediately when 0≤$s$≤1/2. To overcome this difficulty, our main idea is introducing an auxiliary $C^1$ finite element space in the analysis of the penalty term. The same tool is also utilized in the explicit a posteriori error analysis of CIP-FEM.     

Efficient corner-pumped Nd:YAG/YAG composite slab laser

A corner-pumped type is a new pumping type in the diode-pumped all-solid-state lasers, which has the advantages of high pump efficiency and favourable pump uniformity. A highly efficient corner-pumped Nd:YAG/YAG composite slab laser is demonstrated in this paper. The maximal continuous-wave output power of the 1064~nm laser is up to 18.57~W with a slope efficiency and an optical-to-optical conversion efficiency of 44.9{\%} and 39.8{\%}, respectively. Inserting an acousto-optic $Q$-switch in the cavity, the highest average output power of the quasi-continuous wave 1064~nm laser of 6.73~W is obtained at a repetition rate of 9.26~kHz. The experimental results show that a corner-pumped type is a kind of feasible schedules in the design of diode-pumped all-solid-state lasers with low or medium output powers.     

步进电机驱动的直线变倍成像系统研究

为了满足无人机光电载荷的体积和重量要求,并有效解决传统凸轮机构加工精度要求高、系统易产生机械振荡等问题,提高系统的响应速度和变焦精度,对基于步进电机驱动实现连续变焦的直线变倍成像系统进行研究。采用二相混合式步进电机驱动实现机械补偿式变焦系统的变焦聚焦功能。首先,本文研究了基于步进电机的直线变倍成像系统的工作原理与构成,完成硬件平台的搭建,利用单片机控制实现步进电机的加减速过程。然后构造适合本系统的图像清晰度评价函数,并采用扫描反馈搜索算法完成对镜头焦距值的标定,将标定结果载入聚焦算法。最后,完成系统的性能测试。测试结果显示,采用速度控制模型后,步进电机的定位误差显著降低,范围在0.010 mm以下,整个系统的变焦精度远远小于1%,而且光学性能和外场拍摄性能较好。该基于步进电机的直线变倍成像系统满足无人机光电载荷的适用性要求。