Enhancement of sonochemical reaction of terephthalate ion by superposition of ultrasonic fields of various frequencies

The ultrasonic reactor with dual frequency was used and the effect of frequency on the fluorescence intensity of terephthalate ion was experimentally investigated in the frequency range from 176 to 635 kHz. The sonochemical reaction fields were visualized by using sonochemical luminescence of luminol solution. Compared with the fluorescence intensity of terephthalate ion for single frequency, the fluorescence intensity for dual frequency increased. The fluorescence intensity ratio of dual frequency to single frequency had maximum value when the frequency of transducer attached at the bottom wall was comparable in magnitude to that at the side wall. In the case of dual frequency, the sonochemical reaction fields became more extensive in the reactor and more intensive around the center of the reactor.     

电子束泵浦氧化锌基量子阱的斯塔克效应

在不同功率密度的电子束泵浦条件下,对ZnO/Zn0.85Mg0.15O非对称双量子阱的荧光光谱进行了研究,并采用蒙特卡罗仿真模拟对测试结果进行了分析。模拟的结果和实验结果高度吻合。观测到了不随穿透深度变化的阱区发光峰红移,证明表面电荷积累引起了量子限域斯塔克效应。     

Engineering Plasmonic Environments for 2D Materials and 2D-Based Photodetectors

Two-dimensional layered materials are considered ideal platforms to study novel small-scale optoelectronic devices due to their unique electronic structures and fantastic physical properties. However, it is urgent to further improve the light–matter interaction in these materials because their light absorption efficiency is limited by the atomically thin thickness. One of the promising approaches is to engineer the plasmonic environment around 2D materials for modulating light–matter interaction in 2D materials. This method greatly benefits from the advances in the development of nanofabrication and out-plane van der Waals interaction of 2D materials. In this paper, we review a series of recent works on 2D materials integrated with plasmonic environments, including the plasmonic-enhanced photoluminescence quantum yield, strong coupling between plasmons and excitons, nonlinear optics in plasmonic nanocavities, manipulation of chiral optical signals in hybrid nanostructures, and the improvement of the performance of optoelectronic devices based on composite systems.     

基于FDTD的时域混合方法及其在天线前门耦合数值模拟中的应用

强电磁脉冲环境下的平台-机载天线一体化耦合计算属于典型多尺度时域电磁计算问题,采用传统的FDTD方法数值模拟时,由于精细结构的存在导致网格量巨大,计算效率低下。介绍了一种将非均匀FDTD方法与细导线FDTD方法以及多网格集总元件FDTD方法相结合的时域混合方法,能够有效降低计算开销,结合并行计算技术,快速计算得到天线端口上耦合产生的瞬态电压和电流响应,并将该方法成功应用于无人机平台-天线一体化前门耦合数值模拟中。     

单层2H-MoTe2光电效应的理论研究

材料的禁带宽度是影响光电探测器探测范围的重要因素.单层2H-MoTe2因具有合适的禁带宽度引起了科研人员广泛的研究兴趣.本文基于非平衡态格林函数-密度泛函理论,采用第一性原理方法,研究了单层2H-MoTe2的光电效应.结果表明:在线性偏振光照射下,MoTe2产生的光电流函数与唯象理论相吻合;在光子能量范围1.6～1.8...     

Pt/GdFeCo/Pt多层膜的磁性和反常霍尔效应研究

亚铁磁材料因具有反铁磁排列的子晶格磁矩而表现出诸多丰富的物理性质,在磁信息存储和逻辑领域具有广阔的应用前景.本文采用磁控溅射方法在热氧化的硅基片上制备了Pt/GdFeCo(t)/Pt多层膜,系统研究了亚铁磁GdFeCo厚度对多层膜的表面形貌、结构、磁性以及反常霍尔效应(AHE)的影响.结构测试表明薄膜表面粗糙度较小,且GdFeCo层为非晶态;实验中利用GdFeCo层厚度可有效控制Gd元素含量,从而调控GdFeCo趋近反铁磁态特性的磁矩补偿点;通过重金属强自旋轨道耦合效应(SOC)和非晶态亚铁磁薄膜面内压应力,实现了良好垂直各向异性(PMA);进一步阐明了亚铁磁薄膜中磁性和反常霍尔效应的内在产生机制以及磁矩补偿点与温度的内在关系.这些结果为构建新一代低功耗自旋电子器件奠定基础.     

表面传导电子发射显示器件电场分布的理论研究

利用电磁理论对表面传导电子发射显示器件的单个子像素在笛卡尔坐标系内建立合理的电学物理模型，对内部电场强度和电势进行了深入研究，推导出了模型不同部分的面电荷密度、电场强度和电势的表达式.为了形象地表征其电学特性，利用MATLAB 6.5对电场强度和电势的分布情况进行了模拟，从理论上对模拟曲面给出了合理的解释，分析了子像素内部电子的发射机理和电学行为，并与电子多重散射模型和惯性离心模型进行了对比，解释了SED阳极电流形成的重要原因.在误差允许的范围内，本模型有关电场强度分布的结论与惯性离心模型一致. 关键词： 表面传导电子发射显示 遂穿效应 面电荷密度 电场强度     

Screening influence on the Stark effect of impurity states in strained wurtzite GaN/AlxGa1-xN heterojunctions under pressure

The screening effect of the random-phase-approximation on the states of shallow donor impurities in free strained wurtzite GaN/Al x Ga 1 x N heterojunctions under hydrostatic pressure and an external electric field is investigated by using a variational method and a simplified coherent potential approximation.The variations of Stark energy shift with electric field,impurity position,Al component and areal electron density are discussed.Our results show that the screening dramatically reduces both the blue and red shifts as well as the binding energies of impurity states.For a given impurity position,the change in binding energy is more sensitive to the increase in hydrostatic pressure in the presence of the screening effect than that in the absence of the screening effect.The weakening of the blue and red shifts,induced by the screening effect,strengthens gradually with the increase of electric field.Furthermore,the screening effect weakens the mixture crystal effect,thereby influencing the Stark effect.The screening effect strengthens the influence of energy band bending on binding energy due to the areal electron density.     

Hydrophobic effect for anionic dye - cationic surfactant interaction in aqueous and mixed solvent

Abstract

The interaction between anionic dyes [Reactive Orange 122 (R.O 122), Reactive Blue 19 (R.B 19), Reactive Violet 5 (R.V 5) and Acid Green 20 (A.G 20)] with cationic surfactant cetyltrimethylammoniun bromide (CTAB) has been investigated by spectrophotometry and conductance technique. The used dyes are characterized by tautomeric behavior which affects the mechanism of the interaction. Various parameters such as dye structure, surfactant composition, solvent composition, temperature and pH of the medium were studied. The spectral data were applied for calculating the binding constant between dye and surfactant (K_b), fraction of micellization (?_mic), and standard free energy change of binding (ΔG°_b) in 0,10,20 and 30 v/v % acetonitile (AN). Conductance technique was constructed to estimate the ion pairing constant (K_a) at different temperatures and v/v % AN. Thermodynamic parameters (ΔG°, ΔH° and ΔS°) for ion pair formation were evaluated. The role of hydrophobic and electrostatic effect on dye-surfactant interaction was discussed.     

The Determination of Trace Elements by Flame Atomic Absorption Spectrometry: Effect of the Composition of Standard Solution Matrices

Abstract

The effect of using solution matrices in calibration standards different from those employed for the extraction steps in the determination of Cd, Cr, Cu, Ni and Zn were tested. Cu and Zn are little affected by matrix effects but, if the extractant is ammonium acetate, the use of other matrices may result in too high Cd, Cr and Ni values.