Residual stress induced wetting variation on electric brush-plated Cu film

Nanocrystalline Cu film with a mirror surface finishing is prepared by the electric brush-plating technique. The as- prepared Cu film exhibits a superhydrophilic behavior with an apparent water contact angle smaller than 10°. A subsequent increase in the water contact angle and a final wetting transition from inherent hydrophilicity with water contact angle smaller than 90° to apparent hydrophobicity with water contact angle larger than 90° are observed when the Cu film is subjected to natural aging. Analysis based on the measurement of hardness with nanoindentation and the theory of the bond-order-length-strength correlation reveals that this wetting variation on the Cu film is attributed to the relaxation of residual stress generated during brush-plating deposition and a surface hydrophobization role associated with the broken bond polarization induced by surface nanostructure.     

应变对层状锰系锂离子电池正极材料输出电压的影响

利用第一性原理方法系统研究了不同应 变模式对LiMnO₂和Li₂MnO₃输出电压的影响, 建立了输出电压与弹性常数及应变之间的关系. 发现所有应变对输出电压都是降低的, 且应变效应是各向异性的. 大部分的单轴应变5%时对输出电压的降低都小于0.1 V. 由于层状的电极材料层间的键合作用较弱, 且受脱锂后形成的锂空位影响较大, 当从锂层脱出锂时, 垂直于层方向的应变对输出电压影响较大; 而对Li₂MnO₃系统从过渡金属层中脱锂时, 平行于层的应变对输出电压影响更大. Li₂MnO₃骨架支撑的层状固溶体系中, 应变使高电压充电阶段的电压维持在截断电压之下, 并打开过渡金属层中锂的迁移通道, 产生较为持久的充电而可能获得较大的充电容量.     

Fatigue damage behavior of a surface-mount electronic package under different cyclic applied loads

This paper studies and compares the effects of pull-pull and 3-point bending cyclic loadings on the mechanical fa- tigue damage behaviors of a solder joint in a surface-mount electronic package. The comparisons are based on experimental investigations using scanning electron microscopy （SEM） in-situ technology and nonlinear finite element modeling, respec- tively. The compared results indicate that there are different threshold levels of plastic strain for the initial damage of solder joints under two cyclic applied loads; meanwhile, fatigue crack initiation occurs at different locations, and the accumulation of equivalent plastic strain determines the trend and direction of fatigue crack propagation. In addition, simulation results of the fatigue damage process of solder joints considering a constitutive model of damage initiation criteria for ductile materials and damage evolution based on accumulating inelastic hysteresis energy are identical to the experimental results. The actual fatigue life of the solder joint is almost the same and demonstrates that the FE modeling used in this study can provide an accurate prediction of solder joint fatigue failure.     

Temperature-insensitive Mach-Zehnder interferometric strain sensor based on concatenating two waist-enlarged fiber tapers

A novel temperature-insensitive strain sensor,based on an in-line Mach-Zehnder interferometer,is fabricated by concatenating two waist-enlarged fiber tapers separated by a short piece of photonic crystal fiber. The interference spectrum of the proposed sensor is analyzed in detail.Experimental results demonstrate that this sensor has a strain sensitivity of.3.02 pm/μεand maintains the temperature insensitivity feature. The proposed sensor has great potential in diverse sensing applications due to its advantages,such as its compact size,low cost,and simple fabrication process.     

Residual Doppler Effect on Electromagnetically Induced Transparency in a Zeeman Sublevel System

We investigate the residual Doppler effect on the linewidth of electromagnetieally induced transparency （EIT） in a Zeeman sublevel system where a careful experimental design ensures the smallest measurement error. The overall measurement error of the EIT linewidth is estimated to be less than 5%. We present the linear dependence of EIT resonance broadening at small angular deviation in detail. The theoretical analysis exploits the dependence of this feature and shows the qualitative agreement between numerical results and experimental results.     

单轴应变对氮化铟电子结构及光学性质的影响

采用密度泛函理论框架下的第一性原理平面波赝势方法,计算单轴应变下闪锌矿氮化铟的电子结构及光学性质.结果表明：施加应变会使带隙变窄.对于拉应变,随着应变增大带隙减小程度增大;对于压应变,随应变增大带隙减小程度减弱;且拉、压应变对带隙调控都是线性的.在能量区间4 eV~12 eV范围内施加应变时,氮化铟的吸收光谱发生红移,随拉应变程度增加,吸收光谱的红移进一步加大;随压应变增加,吸收光谱红移减弱;在该范围内,氮化铟的折射率、反射率随拉应变的增大而增加,随压应变增加减小;施加拉应变时能量损失函数峰值增大,施加压应变后能量损失函数峰值减小.通过施加单轴应变能有效调节氮化铟材料的电结构及光学性质.     

啁啾相移光纤光栅分布式应变与应变点精确定位传感研究

利用啁啾相移光纤光栅狭缝的中心波长对应变点和应变量的波长敏感性,实现应变与应变点精确定位的传感.当啁啾光纤光栅上的某一位置产生微应变时,该应变点会产生相移,其频谱则会出现一个与之对应的狭缝,且狭缝的深度和中心波长与应变的大小和位置相关.当串接不同中心波长的啁啾光纤光栅后,即可实现一定范围内的分布式应变与应变点精确定位检测.本文通过V-I传输矩阵法建立了狭缝深度和中心波长关于应变量和应变位置的理论模型,分析结果表明理论上可以实现微米量级的精确定位.搭建了级联啁啾相移光纤光栅的分布式应变传感装置,实验获得的最大应变灵敏度为0.19 pm/με.该精确定位传感装置在先进制造、精密加工、航空航天、铁路系统等高新技术领域具有重要的应用前景.     

激光喷丸改善TC6钛合金组织和力学性能

为了使激光冲击强化技术能较好地应用于TC6钛合金的发动机叶片,对TC6钛合金进行试验研究。通过X射线衍射仪、透射电子显微镜等测试技术分析了不同参数下TC6钛合金的微观组织变化,用显微硬度计和残余应力测试仪分别表征表层硬度和残余应力变化,并测试材料冲击后的振动高周疲劳性能。试验结果表明:激光冲击材料后表面组织得到明显细化,随着冲击次数的增加,先后出现了高密度位错、位错胞、亚晶和纳米晶。性能方面,表面硬度在冲击一次即可提高19%,硬度影响深度达到700 m;与此同时表面残余应力最高达到-608.5 MPa,在500 m深度上仍具有-100 MPa左右的应力存在。经三次冲击后,标准疲劳试片的疲劳极限提高近20%。     

Si基双环级联光学谐振腔应变检测研究

绝缘衬底上的硅材料制备的光学微环谐振腔结构具有高灵敏度、结构尺寸小和极低模式体积等特性,被广泛应用到光信息传递、惯性导航领域,但极少被应用到力学信号的测试,为此,研究了一种基于硅基光学微环谐振腔结构的悬臂梁式应力/应变敏感计,利用微环谐振腔环形波导径向形变量作为感应应力的中间物理量,在外界应力作用下,环形波导的半径将发生改变,使结构的光学谐振参数产生变化,从而使光学微环谐振腔谐振谱线发生明显红移,体现出良好的应力/应变敏感特性;通过设计双环级联光学微腔,并采用MEMS光刻、ICP腐蚀工艺制备了嵌入式光学微腔应变计结构,结合理论计算了悬臂梁结构的应力应变敏感特性,经仿真及实验得到,应变计结构的应力/应变灵敏度分别为0.185 pm·kPa-1,18.04 pm·microstrain-1,与单环微腔结构相比,线性量程增加了近50.3%,应力灵敏度提高了近10.6%,初步验证了嵌入式光学微腔结构进行高灵敏度应力/应变检测的可行性,有望实现新型光学力敏传感器件的微型化、集成化。     

光纤法-珀传感器监测混凝土固化期收缩应变的实验研究

本文介绍了光纤法-珀应变传感器的基本原理及优点,并用其进行了混凝土固化过程中的收缩应变监测实验,在混凝土两天的固化过程中监测到了130微应变的收缩应变.本文还对光纤法-珀应变传感器的温度稳定性能进行了理论分析及对比实验,实验结果表明,在一定条件下环境温度对光纤法-珀应变传感器的影响可忽略不计,因此可不用任何温度补偿.