MOLECULAR WEIGHT DISTRIBUTION OF AB, A, TYPE CONDENSATION POLYMERS OBTAINED BY ADDING AB MONOMERS IN BATCHES

The molecular weight distribution (MWD) and arm length distribution of AB, Ar type condensation polymers obtained by adding AB monomers in batches have been derived by statistical and kinetic methods. Calculations show the MWD of condensation polymers obtained by this process is much narrower than that of one batch reaction and agrees with the Monte Carlo results very well.     

白血病骨髓移植病人全血微量元素铜的变化及其意义

为了研究白血病骨髓移植病人全血微量元素铜的变化及其意义 ,用原子吸收光谱法检测了正常对照组与白血病骨髓移植患者预处理前及移植后骨髓空虚期全血微量元素铜的含量。结果表明 ,正常对照组全血铜浓度与白血病骨髓移植患者预处理前全血铜浓度差异无显著性 (P >0 0 5 ) ,而与骨髓空虚期全血铜浓度有显著性差异 (P <0 0 5 ) ,说明白血病缓解后血铜接近正常对照组水平 ,而白血病骨髓移植患者预处理后骨髓空虚期全血铜含量高于正常对照组 ,说明预处理影响微量元素铜的代谢 ,本文就其影响机理进行了研究     

重油催化裂化汽油中含氮化合物的分析

利用酸萃取技术浓缩分离重油催化裂化（RFCC）汽油中的氮化物，比较了两种萃取剂和两种油剂比对分离效果的影响，结果发现选用10％（体积分数）HCl作萃取剂，油剂比为10：1（体积比）时，碱性氮化物的提取率较高；浓缩分离出的氮化物用色谱－质谱联用方法对其进行了检测，结果表明RFCC汽油中的氮化物主要是C0－C2苯胺及少量吡啶类、喹啉类碱性氮化物。     

细支纱摩擦纺初探——尘笼胆结构及其安装角α对纺纱的影响

本文以细支纱摩擦纺为研究对象,利用实验测试手段研究了尘笼胆结构对吸口轴向负压和尘笼胆安装角α对加捻区轴向负压和流速分布的影响。最后,基于类似于控制论中的“黑箱”原理,采用二次正交回归设计在实验室自制单头机上进行了32支纱的纺纱试验,建立了加捻辊加稔效率、纱线品质指标及CV值与尘笼胆几何尺寸、尘笼胆安装角α、摩擦辊转速及纺纱速度间的关系,并作了分析,由此得到选取α=0°、S=6毫米左右较好的结果。     

氨基酚异构体的离子对反相液相色谱分析的研究

本文研究了离子对反相液相色谱分析氨基酚异构体的可能性、影响因素和色谱条件，发现以含４×１０－８ｍｏｌ／Ｌ四丁基碘化铵、０．１８４ｍｏｌ／Ｌ醋酸钠的甲醇水溶液（２３：７７）作为流动相，ＯＤＳ为固定相时可以实现氨基酚异构体的良好分离。     

烯丙基碘和锡与醛的选择加成反应

含活性基团的醛可与烯丙碘和锡粉直接进行亲核加成反应，得到高烯丙基的醇，水的存在不利于此反应的进行，与烯丙基溴相比，烯丙基碘反应活性更强，可在短时间内得较高的产率。     

Binding of wogonin to human serum albumin: a common binding site of wogonin in subdomain IIA

The binding of wogonin to human serum albumin (HSA) has been studied by spectroscopic method including circular dichroism (CD), infrared spectra (IR) and fluorescence spectra. The fluorescence properties of HSA were examined in presence of wogonin and the fluorescence intensity of HSA was significantly decreased in the presence of wogonin. The binding parameters of wogonin were studied from the fluorescence decreasing of HSA by the fluoremetric titrations. The Stern-Volmer plots indicated that the binding of wogonin to HSA at 296, 303, 310 K is characterized by one binding site with the binding constant K(S-V) at 1.872 x 10(5), 1.561 x 10(5), 1.392 x 10(5), respectively, which are good agreement with the results from the Scatchard plots. The binding process was exothermic, enthalpy driven and spontaneous, as indicated by the thermodynamic analyses, and the major part of the binding energy is hydrophobic interaction, which were consistent with the result of molecule modelling study, and there are also a numbers of hydrogen bonds between wogonin and HSA. Furthermore, the displacement experiments indicate that wogonin can bind to the subdomain IIA, that is, the site I of HSA, which is also good agreement with the result of molecule modelling study.     

Highly efficient visible-light photocatalytic ethane oxidation into ethyl hydroperoxide as a radical reservoir

Photocatalytic ethane conversion into value-added chemicals is a great challenge especially under visible light irradiation. The production of ethyl hydroperoxide (CH₃CH₂OOH), which is a promising radical reservoir for regulating the oxidative stress in cells, is even more challenging due to its facile decomposition. Here, we demonstrated a design of a highly efficient visible-light-responsive photocatalyst, Au/WO₃, for ethane oxidation into CH₃CH₂OOH, achieving an impressive yield of 1887 μmol g_cat⁻¹ in two hours under visible light irradiation at room temperature for the first time. Furthermore, thermal energy was introduced into the photocatalytic system to increase the driving force for ethane oxidation, enhancing CH₃CH₂OOH production by six times to 11 233 μmol g_cat⁻¹ at 100 °C and achieving a significant apparent quantum efficiency of 17.9% at 450 nm. In addition, trapping active species and isotope-labeling reactants revealed the reaction pathway. These findings pave the way for scalable ethane conversion into CH₃CH₂OOH as a potential anticancer drug.

Highly efficient visible-light driven photocatalytic oxidation of ethane into ethyl hydroperoxide was realized for the first time over Au/WO₃.     

杯芳烃交联聚硅氧烷热稳定性能研究

聚有机硅氧烷是一类主链由硅-氧键连接而成,侧链为有机基团的聚合物,兼具有机聚合物和无机聚合物的特性,性能优异,尤以卓越的耐高温性能而著称,在大气中于-50~250℃可以长期使用[1].为了进一步提高聚有机硅氧烷的热稳定性,主要有以下几种方法,(1)添加各种耐热性添加剂,或可与聚     

6AZO-CONTAINING SELF-ASSEMBLY ULTRA-THIN FILMS AND THEIR PHOTOVOLTAIC PROPERTIES

A kind of azo-containing resin (Azo-R) was synthesized by a simple way through the coupling reaction of 2-nitro-N-methyldiphenylamine-4-diazoresin (NDR) with phenol, and a new covalentely attached multilayer film from Azo-R as H-donor and photosensitive diazoresin, diphenylamine-4-diazoresin (DR) as H-acceptor via H-bonding attraction by selfassembly technique has been fabricated. Following the decomposition of diazonium group of DR under exposure to UV light, the H-bonds between the layers of the film convert to covalent bonds and the film becomes very stable toward polar solvents or electrolyte aqueous solutions. Thus the UV-irradiated azo-containing films can be used to measure photocurrent in a conventional three-electrode photoelectrochemical cell using KCl as supporting electrolyte. It was confirmed that the azo-containing multilayer film is responsible for the photocurrent generation.