氮掺杂手性碳纳米管的电子结构和输运特性的理论研究

运用第一性原理的密度泛函理论,结合非平衡格林函数,研究了氮原子取代掺杂手性单壁(6,3)碳纳米管的电子结构和输运特性.计算结果表明:不同构形和不同数目的氮原子取代掺杂对手性碳管的输运性质有很复杂的影响.研究发现,氮原子掺杂明显改变了碳管的电子结构,使金属型手性碳管的输运性能降低,电流-电压曲线呈非线性变化,而且输运性能随着杂质原子间间距的变化而发生显著改变.在一定条件下,金属型碳管向半导体型转变. 关键词： 手性单壁碳纳米管 氮掺杂 电子结构 输运性能     

斐索型光学合成孔径系统近轴成像条件研究

从几何光学理论出发，详细推导了斐索型光学合成孔径成像系统的近轴非相干成像条件，即子望远系统的角放大率等于系统的线性缩放因子。对于焦平面上的像点而言，合成孔径成像系统可等效为一个带有特殊形状孔径光阑的望远系统，这要求该孔径光栏的开口形状和位置分布与合成孔径成像系统各子系统孔径大小和位置分布相一致。我们由此得到了斐索型合成孔径成像系统的主要约束条件。     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

Ellipsometric analysis and optical absorption characterization of gallium phosphide nanoparticulate thin film

Gallium phosphide (GaP) nanoparticulate thin films were easily fabricated by colloidal suspension deposition via GaP nanoparticles dispersed in N,N-dimethylformamide. The microstructure of the film was performed by x-ray diffraction, high resolution transmission electron microscopy and field emission scanning electron microscopy. The film was further investigated by spectroscopic ellipsometry. After the model GaP+void|SiO₂ was built and an effective medium approximation was adopted, the values of the refractive index n and the extinction coefficient k were calculated for the energy range of 0.75 eV-4.0 eV using the dispersion formula in DeltaPsi2 software. The absorption coefficient of the film was calculated from its k and its energy gaps were further estimated according to the Tauc equation, which were further verified by its fluorescence spectrum measurement. The structure and optical absorption properties of the nanoparticulate films are promising for their potential applications in hybrid solar cells.     

分子动力学模拟纯镁熔体凝固过程中结构演化

采用分子动力学模拟方法模拟了在周期性边界条件下由500个原子构成的液态Mg模型系统的凝固过程,分别考察了在5×10^14 K/s、5×10^13 K/s、1×10^13 K/s 、1×10^12 K/s的冷却速率下液态Mg熔体的凝固行为。模拟结果很好地重现了实验值。模拟中原子间作用势采用FS势,结构分析采用径向分布函数、均方位移、系统总能量分析、H-A键对分析技术等方法。结果表明,当冷却速率为5×10^14 K/s时,系统形成以1541键对为主的非晶态结构;当冷却速率分别为5×10^13 K/s、1×10^13 K/s、1×10^12 K/s时,系统形成以1421、1422键对为主的hcp晶态结构;另外,在快速冷却形成非晶的过程中,大部分bcc结构被保留下来,而在慢冷形成晶态的过程中,大部分bcc结构最终演化形成了hcp结构。     

轻质建筑中定形相变内隔墙板冬季应用效果研究

现代轻质建筑热容较小,窗墙比较大,冬季在利用透射太阳辐射采暖的同时易造成室内温度波动过大。本文提出将定形相变蓄能板安装在建筑内隔墙表面,以增加建筑热容,减小室温波动。采用经实验验证程序,模拟分析了相变板热物性、表面换热系数和用量对冬季室内温度波动的影响,给出了北京地区相变内隔墙房间的设计原则。     

SiC晶体生长中流场的优化设计

物理气相输运法(PVT)是实验室最为常见的碳化硅(SiC)大块单晶生长方法.本文在碳化硅晶体生长模型化研究中,针对碳化硅单晶PVT生长过程中的传热传质等现象引入了对流传热中的场协同原理,利用这一原理对生长室内的流场温度场进行了优化,并对改良前后分别进行了数值模拟,研究了该原理对晶体生长的影响.实验室碳化硅单晶的生长成功...     

A new probe of neutron skin thickness

The correlation between neutron-to-proton yield ratio (R_np) and neutron skin thickness (δ_np) in neutron-rich projectile induced reactions is investigated within the framework of the Isospin-Dependent Quantum Molecular Dynamics (IQMD) model. The density distribution of the Droplet model is embedded in the initialization of the neutron and proton densities in the present IQMD model. By adjusting the diffuseness parameter of neutron density in the Droplet model for the projectile, the relationship between the neutron skin thickness and the corresponding R_np is obtained. The results show strong linear correlation between R_np and δ_np for neutron-rich Ca and Ni isotopes. It is suggested that R_np may be used as an experimental observable to extract δ_np for neutron-rich nuclei, which is very interesting in the study of the nuclear structure of exotic nuclei, the equation of state (EOS) of asymmetric nuclear matter and neutron-rich matter in astrophysics, etc.     

Stochastic Momentum Cooling——Palmer Cooling at HIRFL-CSRm

The Palmer cooling is always used for large dispersion momentum cooling in storage ring. So it will be used during the stripping injection of HIRFL-CSRm. Here the Palmer cooling is described. The optimum cooling time, optimum gain and optimum cooling bandwidth are obtained in the simulation with Palmer method. Using the Fokker-Planck equation, the particle distribution with respect to the momentum dispersion is also obtained numerically during the stochastic cooling process. This is useful for analysis of experimental data and for design of the cooling system, i.e, optimization of the system passband and gain, specification of accuracy of the signal transmission, etc.     

研究金属切削中组织变化的网格高速摄影装置

研究金属切削过程中的变化,对改进切削工艺、实现高速、自动化和精密加工具有重要意义。高速显微摄影是实现从宏观到微观、从定性到定量、从静态到动态研究的有效方法。