单纵模Nd:YAG激光抽运CH4中强后向受激拉曼散射

用单纵模Nd:YAG二倍频激光[波长532 nm,线宽△vp＜100 MHz,脉宽(半峰全宽)6.5 ns]抽运CH4气体,观察到很强的后向一级斯托克斯(BS1)受激拉曼散射,这与前人采用脉宽30 ns的单纵模抽运激光得到的绝大部分为后向受激布里渊散射(SBS)完全不同,其原因是脉宽6.5 ns与本实验条件下CH4的受激布里渊散射声子寿命接近,受激布里渊散射处于瞬态.理论计算表明,这时的受激布里渊散射瞬态增益系数已略小于后向一级斯托克斯的增益系数,而被其竞争抑制.当脉冲重复频率为2 Hz,抽运能量为95 mJ时,在1.1 MPa CH4中,后向一级斯托克斯的量子转换效率高达73%,其时间波形出现张弛振荡,脉宽被压窄到1.2 ns,从而使后向一级斯托克斯峰值功率达到了抽运激光功率的2.7倍,而且其光束质量要大大优于抽运激光的光束质量.用编制的准二维计算机模型程序相当好地再现了实验中后向一级斯托克斯的时间波形张弛振荡.     

单晶变角EPR谱的解释Ⅱ.掺Cr3+乙酰丙酮铝单晶的EPR

对掺Cr³⁺乙酰丙酮铝单晶的(001),(100)和(110)晶面进行晶面旋转EPR扫描,得到共振磁场随旋转角度变化的实验图形,根据本征插方法编写的程序,对实验谱图进行投合,得到下述顺磁参数,D=0.5870±O.005cm^-1,E=-0.00490±0.0001cm^-1,g_x=g_y=1.965±0.001,g₂=1.984±0.001.     

倍增噪声和饱和效应对环形激光场动力学性质的影响

用一椎近似的方法求得了同时存在倍增噪声和饱和效应的双向环形激光场含时几率密度函数,讨论了倍增噪声和饱和效应对表征激光场动力学性质的两个重要物理量－－光场强度相关时间和有效本征值的影响。     

单晶CeB_6发射性能及磁电阻各向异性研究

采用X射线劳厄定向法对单晶CeB_6的(110),(111),(210)和(310)晶面进行了定向.系统研究了不同晶面热发射性能及磁场对电阻率的影响规律.结果表明,当阴极温度为1873 K时(110),(111),(210)和(310)晶面最大发射电流密度分别为38.4,11.54,50.4和20.8 A/cm~2,表现出了发射性能的"各向异性".RichardsonDushman公式计算逸出功结果表明,上述晶面中(210)晶面具有最低的逸出功,为2.4 eV.从实际应用来看,该晶面有望替代商业化的钨灯丝成为新一代的场发射阴极材料.磁电阻率测量结果显示,当晶体从[001]方向旋转至[011]方向时电阻率从73μ?·cm变化至69μ?·cm,表明电阻率在磁场中沿不同方向同样具有"各向异性"的特点.     

Enhanced Photocatalytic Hydrolysis Performance of Chiral Molecule Loaded Titanium Disulfide Nanosheets

The photoelectrochemical (PEC) water decomposition is a promising method to produce hydrogen from water. To improve the water decomposition efficiency of the PEC process, it is necessary to inhibit the generation of H₂O₂ byproducts and reduce the overpotential required by cheap catalysts and a high current density. Studies have shown that coating the electrode with chiral molecules or chiral films can increase the hydrogen production and reduce the generation of H₂O₂ byproducts. This is interpreted as the result of a chiral induced spin selectivity (CISS) effect, which induces a spin correlation between the electrons that are transferred to the anode. Here, we report the adsorption of chiral molecules onto titanium disulfide nanosheets. Firstly, titanium disulfide nanosheets were synthesized via thermal injection and then dispersed through ultrasonic crushing. This strategy combines the CISS with the plasma effect caused by the narrow bandgap of two-dimensional sulfur compounds to promote the PEC water decomposition with a high current density.     

新型声学超材料单通道麦克风可实现多声源实时定位与分离

在人工系统中,科研人员通常借助由多个传声器组成的传声器阵列来解决声源定位和分离问题。具有高精度声源定位和分离能力的传声器阵列往往需要较大的阵元数量和物理尺寸,这种阵列系统不仅不便于安装和操控,处理多通道信号的计算成本往往也很大,从而导致其应用受限。受生物听音机制的启发,中国科学院噪声与振动重点实验室的博士生孙雪聪与其导师杨军研究员、贾晗研究员等提出了一种基于声学超材料的单通道多声源的定位与分离系统,用一个带有超材料外壳的单通道麦克风实现了三维空间中多个同时发声声源的实时定位与分离。     

联萘基-芘衍生物结构和ECD光谱性质的理论研究

采用密度泛函理论方法研究s-联萘基-芘分子结构、联萘二面角、能隙、电子的圆二色(electronic circular dichroism, ECD)光谱等性质,系统考察其溶剂效应和取代基效应.研究发现,在苯、四氯化碳、氯仿、环己烷和水五种溶剂中,s-联萘基-芘分子的结构和ECD光谱等性质均相似.然而,在氯基、甲基、羟基、甲氧基和苯基五种取代基中,苯基取代基可以调节s-联萘基-芘分子的结构和ECD光谱等性质.     

X射线自由电子激光试验装置

X射线自由电子激光试验装置(以下简称"SXFEL试验装置")是中国第一台X射线相干光源,其输出波长小于9 nm.这台基于0.84 GeV直线加速器、以掌握装置相关技术和实验演示种子型自由电子激光(FEL)级联与短波长回声型FEL为主要目标的自由电子激光装置,于2020年11月通过国家验收.本文将介绍SXFEL试验装置的...     

NUMERICAL SIMULATION OF TWO-POINT CONTACT BETWEEN WHEEL AND RAIL

The elastic-plastic contact problem with rolling friction of wheel-rail is solved using the FE parametric quadratic programming method. Thus, the complex elastic-plastic contact problem can be calculated with high accuracy and efficiency, while the Hertz＇s hypothesis and the elastic semi-space assumption are avoided. Based on the ‘one-point＇ contact calculation of wheel-rail, the computational model of ‘two-point＇ contact are established and calculated when the wheel flange is close to the rail. In the case of ‘two-point＇ contact, the changing laws of wheelrail contact are introduced and contact forces in various load cases are carefully analyzed. The main reason of wheel flange wear and rail side wear is found. Lubrication computational model of the wheel flange is constructed. Comparing with the result without lubrication, the contact force between wheel flange and rail decreases, which is beneficial for reducing the wear of wheel-rail.     

Picosecond laser ablation of high-quality micro-grooves on CIGS (CuIn(1-x)Ga2Se x ) thin films

ABSTRACT

This paper presents a study of the effects of ablation direction, beam profile and outer environment on the width and morphology of micro-grooves ablated by a 10-ps, 532-nm laser with a changing range of fluences and scan speeds on 600?nm-thick CIGS (CuIn_(1-x)Ga₂Se _x ) thin films. Experiments show that rear-side ablation by picosecond laser with a flat top beam in water environment yields a larger groove width than normal front-side ablation with a Gaussian beam in air, which is attributed to different material removal mechanisms, uniform energy distribution and the refraction of laser in water. The heat-affected zone and irregular edges induced by the tearing effect are the main defects of groove morphology associated with front- and rear-side ablation processes, respectively. Our studies indicate that flat top beam ablation, in general, inhibits the over-ablation in the central region, thereby improving the uniformity of grooves, though it does not eliminate the heat-affected zone and irregularity of two edges. The straightness of groove edges is further improved with the flat top beam ablation carried out in a water environment, resulting from the action of the shock wave in water. Hence, the nearly perfect micro-grooves can be fabricated with rear-side flat top beam ablation under water, which are characterized by steep sidewalls, straight edges and intact glass substrate without cracks.