倾斜光纤光栅谱特性

基于倾斜光纤光栅耦合模理论,采用数值分析法研究了前后向导模耦合时倾斜角度和调制深度对倾斜光纤光栅反射谱的影响,以及导模和辐射模耦合时针对不同的入射光偏振态在倾斜角度、调制深度、光栅长度等不同时倾斜光纤光栅透射谱(或反射谱)的特性.研究结果表明,在前后向导模耦合时,不同偏振态入射光的光谱几乎相同;而对于辐射模耦合,由于反射谱的包络受消光系数的调制,而不同偏振态入射光的消光系数不同,并且倾斜角度越大不同偏振态的入射光的消光系数差别越大,故在研究辐射模耦合时需要将偏振态予以考虑.     

NH_3-Ar气氛下制备的Zn_3N_2薄膜的结构和光学性能(英文)

Zn3N2是一种宽带隙半导体材料,在温度高于400°C氧化可生成p型ZnO:N,p型ZnO:N在电子学和光电子学领域有广泛的应用.在NH3-Ar气氛下,用RF磁控溅射金属Zn靶在玻璃衬底上室温制备了Zn3N2薄膜.用紫外-可见分光光度计、X射线衍射仪、X射线光电子谱分析仪、荧光分光光度计对Zn3N2薄膜的光学透过、光学吸收、结构、化学键态和光致发光进行了测量,研究了NH3分压对Zn3N2薄膜的结构和光学特性的影响.XRD分析表明Zn3N2薄膜呈现多晶结构,具有(321)择优取向,Zn3N2(321)衍射峰强度随NH3分压增加而增强.在NH3分压5%～10%制备的Zn3N2薄膜有较低透过率,透过率随NH3分压增加而提高.Zn3N2薄膜是间接带隙半导体,当NH3分压从5%变化到25%时,光学带隙从2.33eV升高到2.70eV.XPS分析表明Zn3N2薄膜在潮湿空气中容易水解.室温下Zn3N2薄膜在437nm和459nm波长出现了发光峰.     

轴对称折叠组合多通道板条型CO2激光器

基于轴对称折叠组合腔CO2激光器和多通道板条型CO2激光器的特点,提出了轴对称折叠组合多通道板条型CO2激光器模型。通过对模型建立、参数设定、腔特性分析、数值模拟等方面的研究,得到输出光强的近场分布规律。通过分析可知其具有共面输出、多光束并和、光束分布高度对称、近场光能强并分布集中等特点。对CO2激光器的研究有一定的参考价值。     

Theoretical study of potential energy curves,spectroscopic constants,and radiative lifetimes of low-lying states in SeO molecule

The low-lying potential energy curves of SeO molecule are computed by means of ab initio multireference configuration interaction technique, taking into account relativistic (scalar plus spin-orbit coupling) effects. The spectroscopic constants of Ω states for X³Σ^-, a¹Δ, b¹Σ⁺, A³Π, A'³Δ, and A"³Σ⁺ states are obtained, and they are in good accordance with available experimental values. The Franck-Condon factors and transition dipole moments to the ground state are computed, and the natural radiative lifetimes of low-lying Ω states are theoretically obtained. Comparisons of the natural lifetimes of Ω states with previous experimental results and those of isovalent TeO molecule are made.     

The structural and magnetic properties of barium ferrite powders prepared by the solben gel method

In this paper, M-type hexagonal barium ferrite powders are synthesized using the sol-gel method. A dried precursor heated in air is analyzed in the temperature range from 50 to 1200 ℃ using thermo-gravimetric analysis and differential scanning calorimetry. The effects of the additives and the cacinating temperature on the magnetic properties are investigated, and the results show that single-phase barium ferrite powders can be formed. After heat-treating at 950 ℃ for 4h with 3 wt% additive, the coercivity and saturation magnetization are found to be 440 Oe and 57.9 emu/g, respectively.     

Improvement on the breakdown voltage for silicon-on-insulator devices based on epitaxy-separation by implantation oxygen by a partial buried n~+-layer

A novel silicon-on-insulator (SOI) high-voltage device based on epitaxy-separation by implantation oxygen (SIMOX) with a partial buried n +-layer silicon-on-insulator (PBN SOI) is proposed in this paper.Based on the proposed expressions of the vertical interface electric field,the high concentration interface charges which are accumulated on the interface between top silicon layer and buried oxide layer (BOX) effectively enhance the electric field of the BOX (E_I),resulting in a high breakdown voltage (BV) for the device.For the same thicknesses of top silicon layer (10 μm) and BOX (0.375 μm),the E I and BV of PBN SOI are improved by 186.5% and 45.4% in comparison with those of the conventional SOI,respectively.     

A Facile Synthesis of Silver-Coated Composite Particles by Swelling Surface Method

We report a facile and rapid method for fabrication of composite particles consisting of a polystyrene (PS) core and a uniform silver shell. The process involves the PS colloid surface swelling, the anchoring of silver ions and nanoparticles onto the surfaces, and the subsequent growth of metal seeds in a short period. The present approach has the advantages of simplicity and high efficiency. The TEM images show the morphology of the obtained PS core-silver shell particles, and their chemical composition and crystallinity are analysed by x-ray diffraction. To our knowledge, this is the first study based on swelling PS surface for synthesis of silver-coated PS particles and may be implemented for preparing other metal-coated PS particles.     

Gd替代对La0.6-xGdxSr1.4MnO4磁性和输运性质的影响

随着x的增加，多晶La0.6-xGdxSr1.4MnO4（x=0, 0.1, 0.2, 0.4, 0.6）的零场冷却 曲线从类自旋玻璃型转变成顺磁型，并且每条零场冷却 曲线都有一在20K的拐点。这一行为可以从Gd和Mn各自对材料总磁性的不同贡献来理解。另外，在所有的样品中，从100K到室温，都观察到了热激活导电行为。由于Mn-Mn间强的反铁磁耦和，直到外场达到50 kOe，都没有观察到明显的磁电阻效应。     

离散的五次非线性薛定谔方程的精确孤子解

利用推广的双曲函数法，我们研究了离散的五次非线性薛定谔方程。当方程的系数满足某种约束关系时，我们得到了新的局域解。这些解包括亮孤子解，暗孤子解，相位交替变化的亮孤子解和相位交替变化的暗孤子解。     

HL-2A装置ECRH系统回旋管次高压电源研制

ECRH作为一种有效的加热手段，在托卡马克聚变装置实验中运用广泛，HL-2A装置ECRH系统采用了双高压电源模式的电子回旋管。这种结构的回旋管最大优点是输出效率高，对主高压电源要求相对较低。为了满足实验要求，使回旋管正常工作并得到较大的输出功率，研制性能稳定可靠、控制方便并具有较高技术指标的次高压电源必不可少。