催化裂化USY／ZnO／Al2O3脱硫添加剂的高温水热失活

 对USY／ZnO／Al2O3汽油催化裂化脱硫添加剂经高温水热老化处理前后的脱硫性能进行了考察，发现老化后添加剂的脱硫性能大幅度下降．采用XRD和IR等技术对USY／ZnO／Al2O3添加剂在高温和高温水热条件下失活的原因进行了研究．结果表明，在高温下，ZnO可与USY沸石中的铝发生固相反应生成ZnAl2O4尖晶石，从而造成USY晶体结构崩塌，转变成无定形状态．在ZnO含量较高的条件下，ZnO可继续与USY晶体结构崩塌后生成的无定形的硅和铝的氧化物反应，生成Zn2SiO4硅锌矿和ZnAl2O4尖晶石结构．这一方面使添加剂失去了可形成硫化物吸附中心的ZnO，另一方面破坏了硫化物的裂化活性组分USY，从而造成添加剂脱硫性能下降甚至失去脱硫活性．ZnO对USY的破坏作用主要与温度有关．在USY／ZnO／Al2O3体系中，ZnO被ZnO与Al2O3之间形成的锌铝尖晶石膜固定并与USY隔离，单纯的高温条件对添加剂的破坏不显著，而水蒸气可以促进ZnO的移动，有利于ZnO与USY的接触，因此在高温和有水蒸气存 在的条件下添加剂的结构易遭到破坏．     

SYNTHESIS AND PHOTOCHROMISM OF ACRYLIC ESTER COPOLYMERS BEARING PENDANT VIOLOGEN GROUPS

A series of acrylic ester copolymers with viologen group as pendant were synthesizedthrough the reaction of MMA-EBA (Ethenyl bromoacetate) copolymer with 4-(4'-pyridyl)-N-alkyl (or arylalkyl) pyridiniums. These viologen copolymers can exchange their anionwith NH_4PF_6 in methanol to improve their solubility in organic solvents such as DMFand acetone. Compared with the corresponding low molecular viologens, these viologencopolymers have relatively lower color development rate under UV light and fade fasterin air due to less affinity to photo-reductant and deficiency of association between theircation radicals. Their photofatigue resistant ability is also slightly better than that of lowmolecular vinlogens.     

磁性固体超强酸SO42-/ZrO2-Al2O3-Fe3O4的制备与性能研究

利用化学共沉淀法将磁性基质与固体酸组装制备磁性纳米固体超强酸催化剂，利用XRD、Raman、TG-DSC、M?ssbauer、TEM、HRTEM等手段对样品性质进行表征。结果表明：磁性基质的引入赋予固体超强酸以超顺磁性；Fe₃O₄、Al₂O₃粒子弥散在ZrO₂基质中，烧结过程中阻碍了扩散传质的进行以及晶界移动，抑制了ZrO₂晶体生长，稳定了四方晶相(T-ZrO₂)；样品粒径分布集中，平均约为32 nm；HRTEM显示T-ZrO₂晶体生长取向于(101)方向，晶面间距d(101)=0.29 nm；Hammett指示剂法测得经600 ℃焙烧后产物的酸强度H_o＜-13.8，酸强度大于浓硫酸(H_o=-11.93)。以柠檬酸三丁酯的合成作为磁性固体超强酸SO₄^2-/ZrO₂-Al₂O₃-Fe₃O₄催化剂的探针反应，结果表明外磁场的引入提高了柠檬酸的转化率。     

共聚酯型热熔粘结纤维结晶结构及其熔融行为

采用DSC与WAXD相结合的方法研究了两个系列的无规嵌段共聚酯型热熔粘结纤维的结晶结构并探讨了系列样品的熔融行为.实验表明,以最低熔融温度为界,可将样品分为两组,每组只含一种可结晶单元的结晶.其结构与物理机械性质随该可结晶单元的加入量而有规律的变化.纤维的粘结性能则取决于非晶区结构,非晶区分子链柔性增加,会明显改善粘结效果.     

褐云玛瑙螺的微量元素分析

采用等离子体发射光谱法(ICP—AES)对褐云玛瑙螺进行了12种微量元素的测定分析。结果表明，褐示玛瑙螺体内含有丰富的人体必需微量元素Fe、Se、Cu、Zn、V、B、Ca等。为深入研究开发利用褐云玛瑙的药用功能和营养价值提供了科学依据。     

1,6-二氢-S-四嗪催化重排及其反应的研究--Ⅱ. 与氯甲酸三氯甲酯反应

在4－二甲胺基吡啶的存在下，1，6－二氢－S－四嗪重排成3，6－二氢－S－四嗪，与双光气反应后再与不同的胺反应，合成了11种1，4－二取代产物，产物经元素分析、IR和^1H NMR确证。用UV和^1H NMR分析结果对反应机理进行了初步探讨。     

MOLECULAR WEIGHT DISTRIBUTION OF AB, A, TYPE CONDENSATION POLYMERS OBTAINED BY ADDING AB MONOMERS IN BATCHES

The molecular weight distribution (MWD) and arm length distribution of AB, Ar type condensation polymers obtained by adding AB monomers in batches have been derived by statistical and kinetic methods. Calculations show the MWD of condensation polymers obtained by this process is much narrower than that of one batch reaction and agrees with the Monte Carlo results very well.     

若干中性配体对Mo—Fe—S簇合物自兜的影响

通过电子吸收光谱的变化研究了一些含N和含P中性配体对MoS_4~(2-)-nFeCl_2-DMF体系形成立方烷型Mo-Fe-S簇合物的可能影响。     

三氟化硼引发四氢呋喃聚合的研究——Ⅳ.1,4-丁二醇的影响

The molecular weight of polytetramethylene glycol (PTMG) prepared from tetrahydrofu-ran (THF) by using cocatalysts of BF3-etherate and epichlorohydrin (ECH) in the presence of butylene glycol(BG) increased sharply with the polymer conversion, but at yields higher than 80% but could be exactly controlled by the molar ratio of BG to BF₃. The polyether obtained possessed around 70 mol% primaly hydrcxyl end-groups and a hydroxyl end-group functionality of two. The content of ECH derived units in each polymer chain containing 18.2 or 33.8THF derived units is around 1.60 or 2.16 respectively.