2维全自动亥姆霍兹线圈磁块测量方法

在波荡器和扭摆器的研制过程中,为提高磁块的测量效率和精度,提出了2维全自动亥姆霍兹线圈磁块测量方法。通过理论推导得到仅采用2维全自动旋转而不需要3维旋转就可以实现磁块的全自动测量,降低了磁块全自动测量的实现难度。根据该方法的理论,已成功研制出一台2维全自动亥姆霍兹线圈测量装备,并在上海光源的磁块测量中使用。系统地给出2维全自动亥姆霍兹线圈磁块的测量理论和方法,并对测量误差进行了分析,该系统实现了磁块剩磁测量的高效率、高精度和高重复性,可以在30 s内完成单磁块的测量,重复性和精度均好于510-4。     

不同处理条件对乳铁蛋白构象的影响研究

运用荧光、圆二色谱及紫外光谱手段,研究了六种不同物理或化学条件处理后,牛乳铁蛋白(Bovine lactoferrin,bLF)三级、二级结构及二硫键的变化。荧光结果显示:6mol.L-1盐酸胍、8mol.L-1尿素和50mmol.L-1二硫苏糖醇三种处理后bLF溶液的最大发射波长从333nm红移至354nm,疏水基团大量暴露,三级结构发生明显变化;100℃加热5min、超声(450W,5s,6个脉冲)、1%巯基乙醇处理后,bLF溶液荧光强度明显减弱,最大发射波长几乎无变化。圆二色谱结果表明:经盐酸胍处理,bLF中α-螺旋结构消失,其余五种处理,二级结构的变化较小。紫外光谱数据表明:二硫苏糖醇对bLF二硫键破坏最严重,超过总二硫键含量的55%,超声次之,盐酸胍、巯基乙醇和加热破坏较少。结果对进一步明确乳铁蛋白的构效关系提供了一定的依据。     

A novel superjunction MOSFET with improved ruggedness under unclamped inductive switching

The ruggedness of a superjunction metal–oxide semiconductor field-effect transistor (MOSFET) under unclamped inductive switching conditions is improved by optimizing the avalanche current path. Inserting a P-island with relatively high doping concentration into the P-column, the avalanche breakdown point is localized. In addition, a trench type P+ contact is designed to shorten the current path. As a consequence, the avalanche current path is located away from the N+ source/P-body junction and the activation of the parasitic transistor can be effectively avoided. To verify the proposed structural mechanism, a two-dimensional (2D) numerical simulation is performed to describe its static and on-state avalanche behaviours, and a method of mixed-mode device and circuit simulation is used to predict its performances under realistic unclamped inductive switching. Simulation shows that the proposed structure can endure a remarkably higher avalanche energy compared with a conventional superjunction MOSFET.     

Level crossing in a two-photon Jaynes—Cummings model

In this paper,the energy spectrum of the two-photon Jaynes-Cummings model(TPJCM) is calculated exactly in the non-rotating wave approximation(non-RWA),and we study the level-crossing problem by means of fidelity.A narrow peak of the fidelity is observed at the level-crossing point,which does not appear at the avoided-crossing point.Therefore fidelity is perfectly suited for detecting the level-crossing point in the energy spectrum.     

Radiation characteristics and implosion dynamics of tungsten wire array Z-pinches on the YANG accelerator

We investigated the radiation characteristics and implosion dynamics of low-wire-number cylindrical tungsten wire array Z-pinches on the YANG accelerator with a peak current 0.8-1.1 MA and a rising time ～ 90 ns.The arrays are made up of(8-32)×5 μm wires 6/10 mm in diameter and 15 mm in height.The highest X-ray power obtained in the experiments was about 0.37 TW with the total radiation energy ～ 13 kJ and the energy conversion efficiency ～ 9%(24×5 μm wires,6 mm in diameter).Most of the X-ray emissions from tungsten Z-pinch plasmas were distributed in the spectral band of 100-600 eV,peaked at 250 and 375 eV.The dominant wavelengths of the wire ablation and the magneto-Rayleigh-Taylor instability were found and analyzed through measuring the time-gated self-emission and laser interferometric images.Through analyzing the implosion trajectories obtained by an optical streak camera,the run-in velocities of the Z-pinch plasmas at the end of the implosion phase were determined to be about(1.3-2.1)×10 7 cm/s.     

Two localized CO2 laser treatment methods for mitigation of UV damage growth in fused silica

Two methods：high-power,short-time,single-shot irradiation（Method A） and low-power,long-time,multi-shot irradiation（Method B） are investigated to mitigate the UV damage growth in fused silica by using a 10.6-μm CO2 laser.To verify the mitigation effect of the two methods,the laser induced damage thresholds（LIDTs） of the mitigated sites are tested with a 355-nm,6.4-ns Nd：YAG laser,and the light modulation of the mitigation sites are tested with a 351-nm continuous Nd：YLF laser.The mitigated damaged sites treated with the two methods have almost the same LIDTs,which can recover to the level of pristine material.Compared with Method A,Method B produces mitigated sites with low crater depth and weak light modulation.In addition,there is no raised rim or re-deposited debris formed around the crater edge for Method B.Theoretical calculation is utilized to evaluate the central temperature of the CO2 laser beam irradiated zone and the radius of the crater.It is indicated that the calculated results are consistent with the experimental results.     

Vertical assembly of carbon nanotubes for via interconnects

The via interconnects are key components in ultra-large scale integrated circuits(ULSI).This paper deals with a new method to create single-walled carbon nanotubes(SWNTs) via interconnects using alternating dielectrophoresis(DEP).Carbon nanotubes are vertically assembled in the microscale via-holes successfully at room temperature under ambient condition.The electrical evaluation of the SWNT vias reveals that our DEP assembly technique is highly reliable and the success rate of assembly can be as high as 90%.We also propose and test possible approaches to reducing the contact resistance between CNT vias and metal electrodes.     

相移吸收二元性算法用于X射线混合衬度定量显微CT的可行性研究

本文采用相移吸收二元性(PAD)相位恢复算法来实现混合 衬度样品内部不同密度组分的定量成像, 采用数字模拟和实验研究验证该方法的可行性. 模拟结果表明, 对于三种不同材料其重构误差均小于1%, 且误差值随材料折射率的增大而减小. 利用上海光源X射线成像线站开展了实验研究, 结果表明用单距PAD相位恢复算法可获取样品的定量信息. 与模拟结果相比, 实验中的重构精度相对较低, 环状伪影可能是影响精度的主要原因. 模拟和实验研究过程中, 均只采用了一组单距投影数据. 可以认为, 相移吸收二元性算法可用于混合衬度样品的定量信息分析研究. 由于剂量相对较低, 应可适合于软组织和骨骼同时存在时生物医学样品的定量相衬CT研究.     

自对耦无序分布随机链Potts模型的临界普适性研究

以蒙特卡罗模拟方法对自对耦分布二维随机链q态Potts模型的短时临界行为进行了数值研究.利用初始非平衡演化阶段存在的普适幂指数和有限体积标度行为，数值模拟了在不同形式随机分布时q＝3和q＝8态Potts模型磁临界指数η和动力学临界指数z.计算结果发现η不依赖于自对偶无序分布的具体形式， 从而以数值方法给出了一个关于淬火掺杂自旋系统的临界普适行为的验证. 关键词： 随机链Potts模型 动力学蒙特卡罗模拟 临界普适性     

高折射率芯Bragg光纤的色散特性研究

应用超格子模型分析了高折射率芯Bragg光纤的色散特性，讨论了Bragg光纤的色散的比例性质以及光纤的芯径、包层周期、填充率与波导色散的关系，并利用这些关系举例实现了Bragg光纤在1.55μm附近的宽带色散平坦. 关键词： Bragg光纤 模式 色散 波导色散