Enhanced transmission through periodic arrays of subwavelength holes: the role of localized waveguide resonances

By using the rigid full-vectorial three-dimensional finite-difference time-domain method, we show that the enhanced transmission through a metallic film with a periodic array of subwavelength holes results from two different resonances: (i) localized waveguide resonances where each air hole can be considered as a section of metallic waveguide with both ends open to free space, forming a low-quality-factor resonator, and (ii) well-recognized surface plasmon resonances due to the periodicity. These two different resonances can be characterized from electromagnetic band structures in the structured metal film. In addition, we show that the shape effect in the enhanced transmission through the Au film with subwavelength holes is attributed to the localized waveguide resonance.     

Inverse transient radiation analysis in one-dimensional non-homogeneous participating slabs using particle swarm optimization algorithms

Particle Swarm Optimization (PSO) algorithms, including standard PSO, Stochastic PSO, and Multi-Phase PSO, are applied to solve the time-domain inverse transient radiation problems in the present research. Time-resolved transmittance and reflectance signals of four different measuring models serve as the measurement data, which estimate absorption, scattering coefficients, and geometric position within one-dimensional non-homogeneous media by inverse simulation. To check retrieval performances and accuracies of PSO-based approaches, four different inverse transient radiation cases are investigated to deal with one homogeneous layer, two-layer, three-layer, and continuous non-homogenous media. The influences of different searching ranges, swarm sizes, and maximum fly velocities on the fitness function of PSO are discussed. Meanwhile, the effects of measurement errors on the reconstruction accuracy are also investigated. All the results confirm that radiative parameters could be estimated accurately with measurement noise using PSO-based approaches.     

Ku波段扩展互作用速调管设计

微波电真空器件随着频率的升高,不但聚焦系统难以实现,而且其输出增益和带宽都受到很大的限制,要解决该问题,建议采用扩展互作用速调管,采用分布作用谐振腔技术来扩展其工作带宽和提高增益。利用CST和粒子模拟(PIC)3维软件对其工作在Ku波段扩展互作用速调管进行了设计和仿真,在工作电压30 kV、束流8.5 A的条件下,聚焦系统采用幅值为0.48 T的周期反转永磁聚焦,在输入功率为5.1 W时,得到效率为23%,3 dB带宽为306 MHz,频带内最大增益为39 dB,其峰值功率为58 kW的微波输出。     

~(252)Cf自发裂变中子发射率符合测量的回归分析

~(252)Cf同位素源具有标准的自发裂变中子能谱,但由于其半衰期较短,应用中常需要对源强进行标定修正.随着源年龄增加,来自源中~(250)Cf和~(248)Cm自发裂变的影响愈加凸显,不能简单按~(252)Cf的衰变规律计算源中子发射率,而通过锰浴活化的间接测量方法周期较长,且在源强低于10~4 n/s时误差较大.最近,基于中子多重性计数的源强绝对测量算法已得到验证.本文进一步从点模型假设的测量方程出发,在将符合计数率与总中子计数率关联的基础上,分别对符合计数率随源位置、符合门宽的变化关系进行回归分析,提取变化过程的特征系数,建立了两种避规效率变化的~(252)Cf中子发射率测量方法,并基于JCC-51型中子符合测量装置开展实验验证.结果表明:两种回归分析方法的测量值均与标称值的修正结果在2%的偏差范围内一致;反推求得装置中轴线上的探测效率也与基于MCNPX程序的蒙特卡罗模拟计算值相符.研究结果可为活度信息不明的~(252)Cf源强标定及符合测量装置的效率刻度提供便携准确的实验方法.     

一种改进的基于信息传播率的复杂网络影响力评估算法

评价网络中节点的信息传播影响力对于理解网络结构与网络功能具有重要意义.目前,许多基于最短路径的指标,如接近中心性、介数中心性以及半局部(SP)指标等相继用于评价节点传播影响力.最短路径表示节点间信息传播途径始终选择最优方式,然而实际上网络间的信息传播过程更类似于随机游走,信息的传播途径可以是节点间的任一可达路径,在集聚系数高的网络中,节点的局部高聚簇性有利于信息的有效扩散,若只考虑信息按最优传播方式即最短路径传播,则会低估节点信息传播的能力,从而降低节点影响力的排序精度.综合考虑节点与三步内邻居间的有效可达路径以及信息传播率,提出了一种SP指标的改进算法,即ASP算法.在多个经典的实际网络和人工网络上利用SIR模型对传播过程进行仿真,结果表明ASP指标与度指标、核数指标、接近中心性指标、介数中心性指标以及SP指标相比,可以更精确地对节点传播影响力进行排序.     

Sr掺杂对La_(1-x)Sr_xMnO_3/LaAlO_3/SrTiO_3界面电子结构的影响

采用基于密度泛函理论的第一性原理计算方法,系统地研究了La_(1-x)Sr_xMnO_3层中Sr的掺杂方式和掺杂量对4La_(1-x)Sr_xMnO_3/3LaAlO_3/4SrTiO_3(LSMO/LAO/STO)异质结构原子和电子结构的影响.结果表明:对于相同的Sr掺杂量,掺杂方式的差异对体系电子结构的影响微弱,不会导致体系发生金属-绝缘体转变;掺杂量的不同对体系电子结构有着显著的影响,当Sr的掺杂量较少时,LAO/STO界面处存在着准二维电子气,当Sr的掺杂量高于1/3时,LAO/STO界面处准二维电子气消失.我们相信,Sr的引入以及通过Sr掺杂量的改变可以对LSMO覆盖层极化进行调控,这也是导致体系LAO/STO界面处金属-绝缘体转变的可能原因,进一步为极化灾变机制导致的界面处电子重构提供了证据.     

多光束激光干涉光刻图样

利用电磁理论,研究了多光束激光干涉图样的产生原理,结合计算机数值模拟和相关实验结果,分析了干涉图样的影响因素。研究结果表明：多光束激光干涉图样可以看成是多组余弦分布的平行线条纹的叠加;相干光束的偏振方向、入射方向、光束间相差是干涉图样的重要影响因素,改变这些因素,余弦分布的平行线条纹的振幅、置、周期和方向发生变化,图样也随之变化。     

La1/3Sr2/3Fe1-xCoxO3体系中的Co替代效应研究

本文通过对La1/3Sr2/3Fe1-xCoxO3系列样品进行X射线衍射(XRD)和变温电阻率(p～T)、比热(C～T)、磁化率(M～T)等测试,研究了Co掺杂对该系列样品的晶体结构和电热磁性质的影响.结果表明,随着Co掺杂量的增加,晶胞体积单调减小;电阻中电荷有序(charge ordering,CO)的特征逐渐消失.Co含量低的样品随着温度降低发生顺磁-反铁磁(PM-AFM)转变和金属-绝缘体(M-I)转变;Co含量高的样品则在磁转变温度以下表现出团簇玻璃型短程铁磁有序行为,并且在整个测量温区内具有金属导电特性.这些证明Co掺杂引起电子的局域化效应是导致体系电磁和输运行为发生变化的主要原因.     

Be(d,n)反应中子源能谱测量及应用

 利用中子飞行时间技术和BC501A液体闪烁探测器的粒子分辨特性,测量了0°方向、20 MeV氘束轰击厚金属铍靶反应产生的中子源能谱,测量的中子能谱范围为0.7～25.0 MeV。在60°方向放置芪晶体闪烁探测器,由刻度好的BC501A液体闪烁探测器归一校正后,用于中子源强度监测。利用Be(d, n) 反应中子源,采用单粒子灵敏度标定方法,实验标定了0.75~15.75 MeV能量范围内的薄膜闪烁探测器中子能量响应曲线,实验结果与蒙特卡罗模拟计算结果在8%的不确定度范围内一致。     

A priori investigation of subgrid correlation of mixture fraction and progress variable in partially premixed flames

Subgrid correlation of mixture fraction, Z, and progress variable, c, is investigated using direct numerical dimulation (DNS) data of a hydrogen lifted jet flame. Joint subgrid behaviour of these two scalars are obtained using a Gaussian-type filter for a broad range of filter sizes. A joint probability density function (JPDF) constructed using single-snapshot DNS data is compared qualitatively with that computed using two independent β-PDFs and a copula method. Strong negative correlation observed at different streamwise locations in the flame is captured well by the copula method. The subgrid contribution to the Z–c correlation becomes important if the filter is of the size of the laminar flame thickness or larger. A priori assessment for the filtered reaction rate using the flamelet approach with independent β-PDFs and correlated JPDF is then performed. Comparison with the DNS data shows that both models provide reasonably good results for a range of filter sizes. However, the reaction rate computed using copula JPDF is found to have a better agreement with the DNS data for large filter sizes because the subgrid Z–c correlation effect is included.