碳化铝与水反应合成甲烷水合物的实验研究

 利用自行设计的高压气水合物实验装置,通过碳化铝与水反应成功合成了甲烷水合物。实验结果表明,碳化铝与水反应合成甲烷水合物的方法有效地解决了传统甲烷水合物模拟实验中甲烷气体引入问题;同时,碳化铝与水反应产生的甲烷及沉淀物能较好地模拟海洋环境中水合物形成的自然条件,为实验模拟甲烷水合物研究提供了一种新方法。利用此方法,对甲烷水合物合成与分解温度、压力条件及动力学过程进行了初步研究。     

电磁驱动与电磁阻尼演示仪原理探究

将演示仪电磁驱动和电磁阻尼二者巧妙地结合起来,并利用单片机测量及数字化显示技术,更好地演示了电和磁这两种特殊物质抽象的物理本质和物理原理.     

斐索型光学合成孔径系统近轴成像条件研究

从几何光学理论出发，详细推导了斐索型光学合成孔径成像系统的近轴非相干成像条件，即子望远系统的角放大率等于系统的线性缩放因子。对于焦平面上的像点而言，合成孔径成像系统可等效为一个带有特殊形状孔径光阑的望远系统，这要求该孔径光栏的开口形状和位置分布与合成孔径成像系统各子系统孔径大小和位置分布相一致。我们由此得到了斐索型合成孔径成像系统的主要约束条件。     

大视场航天遥感器的光学系统设计

设计了一个主镜为凸面的三镜无遮掩全反射光学系统。采用共轴系统设计、离轴视场使用的成像方式,避开了中心遮光,实现了大视场。其视场角为30°×2°,焦距为600mm,相对孔径为1/5 6。各个面都是二次曲面,成像质量接近衍射限。结果表明,用这种方法设计的系统在航天遥感领域具有很好的应用前景。     

Projective synchronization of hyperchaotic system via periodically intermittent control

We further study the projective synchronization of a new hyperchaotic system. Different from the most existing methods, intermittent control is applied to chaotic synchronization in the present paper. We formulate the intermittent control system that governs the dynamics of the projective synchronization error, then derive the sufficient conditions for the exponential stability of intermittent control system by using Lyapunov stability theory, and finally establish the periodically intermittent controller according to the stability criterion by which the projective synchronization is expected to be achieved. The analytical results are also demonstrated by several numerical simulations.     

First-Principles Calculations for Thermodynamic Properties of Perovskite-Type Superconductor MgCNi3

The ground state properties and equation of state of the non-oxide perovstdte-type superconductor MgCNi3 are investigated by first-principles calculations based on the plane-wave basis set with the local density approximation （LDA） as well as the generalized gradient approximation （GGA） for exchange and correlation, which agree well with both theoretical calculations and experiments. Some thermodynamic properties including the heat capacity, the thermal expansion coefficient and the Griineisen parameter for perovskite structure MgCNi3 are obtained. The dependences of these thermodynamic properties on pressure and temperature are given for the first time.     

基于二维非线性光子晶体的全光开关特性

为获得一个优化的全光开关结构,在光子晶体90°弯曲波导的基础上,进一步改进光子晶体结构,并在其中加入克尔型非线性介质柱,得到了非线性光子晶体全光开关结构。通过时域有限差分(FDTD)法数值分析表明,该开关结构能够实现的带宽大约为50nm,消光比大于40dB,阈值功率密度约为5.2W/μm。同时,该结构还可以实现基本的逻辑功能。     

多光束激光干涉光刻图样

利用电磁理论,研究了多光束激光干涉图样的产生原理,结合计算机数值模拟和相关实验结果,分析了干涉图样的影响因素。研究结果表明：多光束激光干涉图样可以看成是多组余弦分布的平行线条纹的叠加;相干光束的偏振方向、入射方向、光束间相差是干涉图样的重要影响因素,改变这些因素,余弦分布的平行线条纹的振幅、置、周期和方向发生变化,图样也随之变化。     

Homogeneous interface-type resistance switching in Au/La0.67Ca0.33MnO3/SrTiO3/F:SnO2 heterojunction memories

La0.67Ca0.33MnO3 thin films are fabricated on fluorine-doped tin oxide conducting glass substrates by a pulsed laser deposition technique with SrTiO3 used as a buffer layer. The current-voltage characteristics of the heterojunetions exhibit an asymmetric and resistance switching behaviour. A homogeneous interface-type conduction mechanism is also reported using impedance spectroscopy. The spatial homogeneity of the charge carrier distribution leads to field- induced potential-barrier change at the Au-La0.67Ca0.33MnO3 interface and a concomitant resistance switching effect. The ratio of the high resistance state to the low resistance state is found to be as high as 1.3 x 10^4% by simulating the AC electric field. This colossal resistance switching effect will greatly improve the signal-to-noise ratio in nonvolatile memory applications.     

低温恒能量同步荧光法同时快速检测食品中多种多环芳烃

恒能量同步荧光法应用于多环芳烃的检测可以提高选择性,低温可使谱带呈指纹特征,提供常温光谱无法获得的光谱细节信息,有助于实现对复杂基体中多环芳烃的检测。文章结合恒能量同步荧光扫描技术与斯波斯基低温技术,建立了食品中多种多环芳烃的低温恒能量同步荧光同时快速分析方法。对低油脂样品直接用正辛烷浸泡,高油脂样品也只需要增加皂化萃取,即可进行光谱扫描来检测食品样中的多种多环芳烃。对两种类型的实际样进行加标回收实验,回收率为80.2%～98.9%,定量工作曲线线性较好(r≥0.993 8)。该方法选择性好、操作简便快捷、费用低廉。