Preparation of biomedical Ag incorporated hydroxyapatite/titania coatings on Ti6Al4V alloy by plasma electrolytic oxidation

Nano-Ag incorporated hydroxyapatite/titania(HA/TiO2) coatings were deposited on Ti6Al4V substrates by the plasma electrolytic oxidation process. Compared with the substrate, the deposited coatings display attractive mechanical and biomedical properties. First, the coatings have stronger wear resistance and corrosion resistance. Second, they show a strong antibacterial ability. The mean vitality of the P. gingivalis on the coating surfaces is reduced to about 21%.Third, the coatings have good biocompatibility. The mean viability of the fibroblast cells on the coating surface is increased to about 130%. With these attractive properties, Ag incorporated HA/TiO2 coatings may be useful in the biomedical field.     

Preparation of biomedical Ag incorporated hydroxyapatite/titania coatings on Ti6AI4V alloy by plasma electrolytic oxidation

Nano-Ag incorporated hydroxyapatite/titania （HA/TiO2） coatings were deposited on Ti6A14V substrates by the plasma electrolytic oxidation process. Compared with the substrate, the deposited coatings display attractive mechani- cal and biomedical properties. First, the coatings have stronger wear resistance and corrosion resistance. Second, they show a strong antibacterial ability. The mean vitality of the P. gingivalis on the coating surfaces is reduced to about 21%. Third, the coatings have good biocompatibility. The mean viability of the fibroblast cells on the coating surface is increased to about 130%. With these attractive properties, Ag incorporated HA/TiO2 coatings may be useful in the biomedical field.     

Increasing the ·OH radical concentration synergistically with plasma electrolysis and ultrasound in aqueous DMSO solution

In recent years, significant increases in waste processing and material engineering have been seen by using advanced oxidation processes. The treatment results and energy yields of these processes are largely determined by the generation and retention of reactive oxygen species (ROS). However, increasing the amount of ROS remains a key challenge because of the unavailability of performance- and energy-efficient techniques. In this study, plasma electrolysis, ultrasound, and plasma electrolysis combined with ultrasound were used to treat dimethyl sulfoxide (DMSO) solutions, and the results showed that the two methods can synergistically convert filament discharge into spark discharge, and the conversion of the discharge mode can significantly increase the concentration of OH radicals and effectively improve the efficiency of DMSO degradation. We verified the rationality of the results by analyzing the mass transfer path of ROS based on the reaction coefficients and found that the ·OH radicals in aqueous solution were mainly derived from the decomposition of hydrogen peroxide. These findings indicated that the synergistic action of plasma electrolysis and ultrasound can enhance the production of chemically reactive species, and provide new insights and guiding principles for the future translation of this combined strategy into real-life applications. Our results demonstrated that the synergistic strategy of ultrasound and plasma electrolysis is feasible in the switching mode and increasing the ROS, and may open new routes for materials engineering and pollutant degradation.     

Impact of microsecond-pulsed plasma-activated water on papaya seed germination and seedling growth

The seed of Carica papaya consists of a hard shell-like testa with inhibitors in vivo causing slow, erratic and asynchronous germination. In this work, plasma-activated water prepared by microsecond-pulsed plasma jets (μPAW) was applied to treat papaya seeds. The μPAW after plasma activation of 30 min was about 40 ℃. The reactive species such as NO₂, NO₃, and H₂O₂ in the μPAW activated from deionized water were measured and correlated to the seed germination rate and the seedling growth performance. The μPAW-treated papaya seed achieved a higher germination rate of 90%, which is 26% higher than the control group using deionized water. Comparing the results with a hot water (40 ℃) reference group showed that the reactive species in μPAW played primary roles in germination improvement, with little effect caused by the heat shock. The μPAW also sterilized the treated seeds, reducing the germination stress. The morphological change in the seeds was observed by SEM, showing an effect of physical etching after treatment promoting seed imbibition. The biochemical mechanism of the seed germination was deduced with reference to the evolution of surface chemistry, functional groups, and ABA content. The accelerated seed metabolism observed was corresponded to the chemical modification pathway. Besides, early seedlings developed from treated seeds were observed to be healthy, grow more leaves, and have better root structures. The content of MDA in the treated papaya seedlings decreased along with increased SOD and higher ion concentration. The μPAW that can be prepared at atmospheric pressure for bulk production offers a low-risk and cost-effective seed priming technology that may significantly increase the production of agricultural crops.     

汽相沉积法SnO_2薄膜光谱透过率气敏特性的研究

本文研究了用汽相沉积法制备ＳｎＯ２气敏薄膜和ＳｎＯ２膜的光谱透过率气敏特性。用汽相沉积制备ＳｎＯ２的方法是利用一个密封的石英管系统，把ＳｎＣｌ４溶液置于系统内，氧气通人系统，然后系统升温使ＳｎＣｌ４气化，通过控制氧气流量、沉积温度和沉积时间等，使气化后的Ｓｎ原子与氧原子在一定条件下生成ＳｎＯ２，沉积在玻璃衬底上。本文用ＡＳ－４３０Ｓ俄歇式电子能谱仪测试膜片的主要成分，并用光栅单色仪测试了膜片在乙醇还原性气体中的气敏特性。实验结果表明：与热喷法制备的ＳｎＯ２膜比较，沉积法具有工艺重复性好，可以控制沉积膜的厚度，灵敏度高等优点。因此，可制备出有选择性的“气敏－光透过率”型气敏传感器。     

Structure and phase transition of a two-dimensional dusty plasma

The structure and phase transition of a two-dimensional (2D) dusty plasma have been investigated in detail by molecular dynamics simulation. Pair correlation function, static structure factor, mean square displacement, and bond angle correlation function have been calculated to characterize the structural properties. The variation of internal energy, shear modulus, particle trajectories and structural properties with temperature has been monitored to study the phase transition of the 2D dusty plasma system. The simulation results are in favour of a two-step continuous transition for this kind of plasma.     

8mm微波在等离子体离子声湍流上的散射测量

湍流是等离子体物理的前沿课题之一．离子声湍流是该课题常见的研究对象．作者用８ｍｍ微波在小型稳态放电装置上对电流激励离子声湍流的色散关系及饱和湍流能量波数谱进行了散射测量．该类实验目前国内未见报道．一、散射角分辨率对测量的影响设向等离子体传播的入射微波的波矢和频率分别为Ｋｉ和ωｉ,从等离子体散射的微波的波矢和频率分别为Ｋｓ和ωｓ,等离子体密度涨落的波矢和频率分别为Ｋ和ω,散射区间沿Ｋ１方向的长?...     

富含胞嘧啶单链DNA-银纳米簇荧光探针用于S1核酸酶的灵敏检测

以富含胞嘧啶（C）的单链DNA为模板合成银纳米簇,将其作为功能化探针,建立了一种无标记荧光检测S1核酸酶的方法.S1核酸酶可以特异性识别单链DNA,在最适的酶催化反应条件下,可将其降解为单核苷酸或寡核苷酸片段.当S1核酸酶不存在时,富含C的单链DNA可以有效地合成荧光银纳米簇;当S1核酸酶存在时,单链DNA模板被特异性识别并降解,导致无法形成银纳米簇,使体系荧光信号降低.实验结果表明,银纳米簇的荧光强度随着S1核酸酶浓度的增加而降低.在优化的条件下,体系荧光信号（F/F₀）与S1核酸酶的浓度在5.0×10^-5~4.0×10^-3 U/μL范围内呈线性关系,检出限为2.0×10^-6 U/μL.该荧光探针选择性好,可用于RPMI 1640细胞培养基中S1核酸酶的检测,回收率达到91.8%~109.5%.     

纳秒脉冲下聚合物电树枝引发实验方法

借鉴直流、交流的研究经验,比较了纳秒脉冲条件下几种不同的电树枝老化实验方法。对单针-板电极和多针-板电极在纳秒脉冲下实验结果的一致性进行考察,结果表明,多针-板电极系统可以在提高实验效率的同时保证结果的准确性。采用步进法和累加法进行了不同频率下聚苯乙烯电树枝引发实验,结果表明:两种方法得到的纳秒脉冲下聚苯乙烯电树枝引发电压-频率特性基本一致,在50~500 Hz范围内,引发电压随频率的升高而降低;在500~800 Hz范围内,引发电压随频率的升高而增加。最后讨论了对于不同脉冲功率装置中绝缘材料老化试验设计的方法。     

真空中激光触发脉冲电压下绝缘材料闪络特性

搭建了真空中脉冲电压下激光触发沿面闪络试验平台,在试验平台上进行常用开关绝缘介质尼龙、聚碳酸酯和Al2O3陶瓷的激光触发沿面闪络特性试验,探讨了真空中激光触发沿面闪络的机理。试验结果表明：聚碳酸酯试品的自闪络电压最高;在真空中脉冲电压下的激光触发沿面闪络试验中,随着激光能量密度的增大,3种材料的时延和抖动均减小;532 nm和1 064 nm波长激光触发的条件下,3种材料的抖动均在1 ns左右,聚碳酸酯抖动较小;532 nm波长激光触发的时延小于1 064 nm波长激光触发的时延。