The effects of substrate temperature on ZnO-based resistive random access memory devices

Ag/ZnO/Zn/Pt structure resistive switching devices are prepared by radio frequency magnetron sputtering.The ZnO thin films are grown at room temperature and 400 C substrate temperature,respectively.By comparing the data,we find that the latter device displayed better stability in the repetitive switching cycle test,and the resistance ratio between a high resistance state and a low resistance state is correspondingly increased.After 104-s storage time measurement,this device exhibits a good retention property.Moreover,the operation voltages are very low:-0.3 V/-0.7 V(OFF state) and 0.3 V(ON state).A high-voltage forming process in the initial state is not required,and a multistep reset process is demonstrated.     

The effect of interfacial energy anisotropy on planar interface instability in a succinonitrile alloy under a small temperature gradient

The morphological stability of a planar interface with different crystallographic orientations is studied under a small positive temperature gradient using a transparent model alloy of succinonitrile.Novel experimental apparatus is constructed to provide a temperature gradient of about 0.37 K/mm.Under this small temperature gradient,the planar interface instability depends largely on the crystallographic orientation.It is shown experimentally that the effect of interfacial energy anisotropy on planar interface stability cannot be neglected even in a small temperature gradient system.Higher interfacial energy anisotropy leads the planar interface to become more unstable,which is different from the stabilizing effect of the interfacial energy on the planar interface.The experimental results are in agreement with previous theoretical calculations and phase field simulations.     

Design of a reentrant double staggered ladder circuit for V-band coupled-cavity traveling-wave tube

The reentrant double staggered ladder slow-wave structure is employed in a high-power V-band coupled-cavity traveling-wave tube. This structure has a wide bandwidth, a moderate interaction impedance, and excellent thermal dissipation properties, besides the easy fabrication. A well-matched waveguide coupler is proposed for the structure. Combining the design of attenuators, a full-scale three-dimensional circuit model for the V-band coupled-cavity traveling-wave tube is constructed. The electromagnetic characteristics and the beam--wave interaction of this structure are investigated. The beam current is set to be 100 mA, and the cathode voltage is tuned from 16.8 kV to 15.8 kV. The calculation results show that this tube can produce a saturated average output power over 100 W with an instantaneous bandwidth greater than 1.25 GHz in the frequency ranging from 58 GHz to 62 GHz. The corresponding gain and electronic efficiency can reach over 32 dB and 6.5%, respectively.     

Vertical assembly of carbon nanotubes for via interconnects

The via interconnects are key components in ultra-large scale integrated circuits(ULSI).This paper deals with a new method to create single-walled carbon nanotubes(SWNTs) via interconnects using alternating dielectrophoresis(DEP).Carbon nanotubes are vertically assembled in the microscale via-holes successfully at room temperature under ambient condition.The electrical evaluation of the SWNT vias reveals that our DEP assembly technique is highly reliable and the success rate of assembly can be as high as 90%.We also propose and test possible approaches to reducing the contact resistance between CNT vias and metal electrodes.     

Projective synchronization of hyperchaotic system via periodically intermittent control

We further study the projective synchronization of a new hyperchaotic system. Different from the most existing methods, intermittent control is applied to chaotic synchronization in the present paper. We formulate the intermittent control system that governs the dynamics of the projective synchronization error, then derive the sufficient conditions for the exponential stability of intermittent control system by using Lyapunov stability theory, and finally establish the periodically intermittent controller according to the stability criterion by which the projective synchronization is expected to be achieved. The analytical results are also demonstrated by several numerical simulations.     

荧光色散谱对FeS(X5△)振动常数的实验确认

基于之前的激光诱导荧光激发谱工作,采用激光诱导荧光色散谱技术直接侦测中性FeS基电子态X5￠振动能级到v″=3而获得其振动常数. 所得FeS(X⁵△)振动频率值(518±5 cm^-1)和最近的光电子能谱测量值(520±30 cm^-1) [J. Phys. Chem. A 107, 2821 (2003)]符合得较好,该光电子能谱测量值是之前唯一报道的FeS电子态振动频率的实验值. 通过比较实验结果和相关文献(主要来自理论预测),确定FeS的基态是X⁵△态.     

全原子分子动力学模拟结合核磁共振波谱研究N-甘氨酰甘氨酸水溶液的结构和弱相互作用

采用分子动力学模拟方法结合核磁共振化学位移系统研究了甘氨酰甘氨酸水溶液体系饱和溶解度范围的弱相互作用. 径向分布函数表明体系中不同类型的原子显示出形成氢键的不同能力. 氢键网络分析发现了不同氢键所能形成的分子簇结构. 随温度变化核磁共振化学位移值用于研究形成氢键的变化情况,并和模拟得到的结果进行比较,模拟和实验结果得到了较好的吻合.     

Local dimming algorithm and color gamut calibration for RGB LED backlight LCD display

A 32 in RGB LED backlight unit is developed. A local dimming algorithm is designed for the backlight, and grid-noise artifacts in the LC driving signal are successfully removed with consideration of the backlight distribution to provide identical intensity from each LED block. The 32 in RGB LED backlight LCD display has achieved a static display contrast of over 20000:1 and an average power reduction of 30%. We have also obtained the color gamut transformation matrix for transferring a cold cathode fluorescent lamp BLU LCD display gamut system to our RGB LED BLU LCD display gamut system, and extended the color saturation by suppositional color expansion method. As a result, the color has been accurately reproduced in RGB LED BLU LCD display with more richness and more saturation.     

Mg-Ni-Nd非晶合金晶化温度与晶化驱动力的预测

通过对Buschow提出的预测二元非晶态合金晶化温度的“最小空位”模型进行扩展,并进一步结合Miedema理论得到了一种预测三元非晶态合金晶化温度和晶化驱动力的理论方法.利用该方法计算了(Mg_70.6Ni_29.4)_1-xNd_{x(x＝5,10,15)非晶态合金的晶化温度、晶化驱动力以及晶化焓.其中晶化温度和晶化焓的理论预测值与实验值的相对误差分别小于8%和7%.同时发现较高的晶化驱动力会降低 关键词： 非晶态合金 晶化温度 晶化驱动力}     

含重叠路段交通系统中信息反馈策略的比较研究

智能交通系统可以实时反馈路况信息、诱导出行,进而缓解交通拥堵.在时间反馈和平均速度反馈两种信息服务策略下,考虑重叠路段的影响,利用元胞自动机模型对人们的路径选择行为进行了模拟.结果表明,在含有重叠路段的网络中,相对时间反馈策略而言,平均速度反馈策略可以更有效地降低人们的出行时间,其优势在重叠部分长度占路径长度的比例很小和较大时十分明显,且随路径长度的增加而上升.在提高路网的利用效率方面,平均速度反馈策略的优势随路径长度的增加而逐渐下降,随重叠部分长度的增加而先降后升. 关键词： 交通流 元胞自动机 智能交通系统 信息反馈策略